Digital Commons Network^™

Mitigating Hysteresis In Metal-Coated Fibers Via Optimized Thermal Treatment For Advanced Distributed High-Temperature Sensing Applications, Koustav Dey, Rony Kumer Saha, Bohong Zhang, S. Narasimman, Farhan Mumtaz, Jeffrey D. Smith, Rex E. Gerald, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up …

Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems, Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In sensor-driven dynamic systems, missing data can severely degrade parameter estimation accuracy. This article investigates the impact of missing data on phase estimation in a mass-spring-damper system using an information-theoretic framework based on the Cramér-Rao Lower Bound (CRLB). Closed-form CRLB expressions are derived for four scenarios: complete data, missing completely at random (MCAR) deletion, MCAR-based imputation, and missing at random (MAR) missingness via a selection-weighted formulation. These bounds are used as theoretical benchmarks to evaluate classical imputation methods (last observation carried forward (LOCF), linear interpolation) and advanced approaches (Kalman filtering, Rauch-Tung-Striebel (RTS) smoothing, Bayesian inference, and transformer-based imputation) through Monte …

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel deep learning (DL) approach has been proposed to realize high-resolution electromagnetic (EM) inversion imaging. The newly proposed approach is based on the deep convolutional double-module structure (DCDMS), consisting of the pixel-interpolating module and the corresponding quality-improving module. While the pixel-interpolating module roughly increases the 'resolution' of the initial input, the following quality-improving module realizes quantitative EM imaging in high resolution. The input of the proposed DCDMS adopts the mixed input scheme, consisting of the received EM scattered field and the initial reconstruction in much low resolution computed from Gauss-Newton method. The output of the proposed …

Array Signal Processing And Machine Learning In 5g/6g Networks, Roopesh Kumar Polaganga

Electrical Engineering Dissertations - Archive

This dissertation investigates advanced methodologies in Array Signal Processing (ASP) and Machine Learning (ML) to enhance the performance, efficiency, and intelligence of next-generation wireless networks, with a primary focus on 5G and emerging 6G systems. As wireless networks face rapid traffic growth, increasingly heterogeneous service requirements, and more complex propagation environments, conventional design and optimization approaches become insufficient to meet evolving demands in reliability, capacity, spectral efficiency, and energy efficiency. On the network intelligence side, this work develops data-driven frameworks for causal discovery, scheduler enhancement, session-duration prediction, and Radio Resource Control (RRC) state optimization using real-world telecommunication network data. On …

Adaptive Boundary-Aware Fact-Checker Placement For Misinformation Suppression In Social Networks, Mostafa Taghizade Firouzjaee, Ghazal Naderi, Ross Gore, Neda Moghim

School of Cybersecurity Faculty Publications

The spread of fake news on online social networks is driven by imitation-based user behavior and network topology, often leading to persistent misinformation clusters and echo chambers. In this study, we develop a spatial evolutionary game-theoretic framework in which agents update their latent opinions through payoff-biased imitation, while external fact-checkers act as non-imitative intervention nodes. Building on this formulation, we propose an adaptive, boundary-aware intervention mechanism that dynamically regulates both the density and spatial allocation of fact-checkers according to real-time system conditions. Competing information clusters are identified through local neighborhood composition, enabling boundary nodes, i.e., interfaces between fake-news and non-fake-news …

Improving Efficiency In Noma Schemes Having Inter-User Interference Using Mechanism Design, Zory Marantz

Publications and Research

Modern wireless systems utilize non-orthogonal multiple access to increase their rate capacities; however, the efficiency of the individual utility defined in bits per Joule has yet to be considered. Multiple variations of non-orthogonal multiple access have the interference of the signal-to-interference-plus-noise ratio as a function of the received power from multiple other users due to code implementations that are non-orthogonal or non-ideal cancellation in successive-interference-cancellation methods. Game theoretic concepts are used to improve user bits-per-Joule performance. Previous solutions increment transmit power and are not based on closed form systematic methods. The mechanism design presented here led to a non-cooperative Nash …

Solving High-Dimensional Differential Equations Using Recurrent And Residual Neural Network Architectures, Hind Khaled Kolaib

Knowledge Engineering and Data Science

High-dimensional Partial Differential Equations (PDEs) form the foundation of complex process modeling in various scientific and engineering applications, including finance, physics, and optimal control. However, classical numerical methods are adversely affected by the curse of dimensionality, making them inapplicable for large-scale problems. Recently, however, deep learning-based approaches have provided a new toolbox for these high-dimensional PDEs, including methods such as the Deep Backward Stochastic Differential Equation (Deep BSDE) method. Our approach draws on a more sophisticated deep learning backbone, using neural networks (in our case, a Residual Neural Network and a Long Short-Term Memory network (LSTM) integrated into the Deep …

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of M_F=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

Experimental Rate Feedback Control Of A Model-Scale Hourglass-Shaped Heaving Point Absorber, James R. Halverson

Dissertations, Master's Theses and Master's Reports

Buoy geometry greatly affects a point absorber wave energy converter's dynamic response to waves. Finding the optimal buoy shape and control method remains an open research area focused on maximizing the conversion of wave kinetic energy into electricity. This work presents an experimental comparison of closed-loop energy extraction between a cylindrical and a truncated cone buoy, both with the same submerged volume, across various wave frequencies and amplitudes. To ensure a fair comparison, the optimal rate feedback gain is calculated for each buoy at each wave condition. Multiple metrics, including power output, capture width, and actuator force, are used to …

Open Source Tools For Ecological Research, Alex P. Riebe

Dissertations, Master's Theses and Master's Reports

This thesis presents the development of an open source wireless sensor network for hibernacula manipulation with an emphasis on accessibility and reproducibility. It addresses the design of the electrical hardware, guidance on antennas and RF implementation, and design of an application-specific communication protocol, all with the explicit goal of enabling ecologists and other conservationists to be able to manufacture, deploy, operate, and maintain the system for their research. The resulting sensor network designed in this thesis is to control the temperature inside bat hibernacula during the winter to study the relationship between temperature and bat mortality rate due to White …

Design And Validation Of A Low-Cost Wearable Electromyography (Emg) System For Monitoring Exercise-Induced Changes In Muscle Activity, Ingrid E. Halverson

Dissertations, Master's Theses and Master's Reports

Wearable technologies have expanded opportunities for monitoring athletic performance, but many existing systems remain costly and confined to laboratory or medical settings. This thesis presents the design, development, and evaluation of a low-cost, wearable EMG platform for monitoring neuromuscular activity during exercise. A wireless device incorporating a surface EMG sensor, an ESP32 microcontroller, and Wi-Fi transmission was developed to acquire muscle activation data. Signal processing techniques, including filtering, root-mean-square (RMS), mean frequency (MNF), and median frequency (MDF) analyses, were used to evaluate changes in muscle activation. Experimental testing demonstrated reliable wireless data acquisition and successful capture of physiological changes before …

High-Performance Circuit Manufacturing And Testing Exercises, Benjamin S. Keppers

Dissertations, Master's Theses and Master's Reports

An advanced demonstrator Printed Circuit Board (PCB) has been designed and implemented providing a framework for advancing students’ knowledge in hands-on PCB design and manufacturing process through industry recognized test coupons, stack ups, and transmission lines. Students are guided through several key aspects of design and simulation relating to manufacturing and qualifications. Manufacturing allows students to refine process development and analyze performance data with respect to qualification tests specified by Global Electronics Association standards. Results are then used to build a stackup model, and complete a design activity for calculating expected test results for a series of controlled impedance electrical …

Advancing Task-Oriented Dialog Systems: Scalability, Generalization, And Evaluation, Adib Mosharrof

Theses and Dissertations--Computer Science

Task-oriented dialog (TOD) systems enable conversational interfaces for complex tasks like flight booking and restaurant reservations. However, deploying TOD systems at scale faces three critical barriers: scalability, generalization, and evaluation. Scalability is primarily restricted by the human-annotation bottleneck, as current systems depend on vast quantities of manually labeled data for every new domain, making deployment prohibitively expensive. Generalization remains a persistent challenge, as systems optimized for known domains often suffer significant performance degradation when encountering new, unseen ones. Existing evaluation metrics measure response quality and fluency, but fail to measure functional task success. As TOD systems are deployed across diverse …

Physics-Informed Temperature Prediction Of Lithium-Ion Batteries Using Decomposition-Enhanced Lstm And Bilstm Models, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

Accurately forecasting the operating temperature of lithium-ion batteries (LIBs) is essential for preventing thermal runaway, extending service life, and ensuring the safe operation of electric vehicles and stationary energy-storage systems. This work introduces a unified, physics-informed, and data-driven temperature-prediction framework that integrates mathematically governed preprocessing, electrothermal decomposition, and sequential deep learning architectures. The methodology systematically applies the governing relations to convert raw temperature measurements into trend, seasonal, and residual components, thereby isolating long-term thermal accumulation, reversible entropy-driven oscillations, and irreversible resistive heating. These physically interpretable signatures serve as structured inputs to machine learning and deep learning models trained on temporally …

Machine Learning-Based Lifetime Prediction Of Lithium Batteries: A Comparative Assessment For Electric Vehicle Applications, Abdelilah Hammou, Raffaele Petrone, Demba Diallo, Boubekeur Tala-Ighil, Philippe Makany Boussiengue, Hicham Chaoui, Hamid Gualous

Electrical & Computer Engineering Faculty Publications

This paper evaluates and compares four data-driven methods (Gaussian Process Regression (GPR), echo state network (ESN), gated recurrent unit (GRU), and long short-term memory (LSTM)) for lithium-ion capacity prognostics adapted to electric vehicle conditions. This comparison aims to find the most efficient prognosis method considering two constraints: the limitation of computational power and the unavailability of on-board capacity measurement that requires full charge and discharge conditions. The machine learning models are trained using capacity values estimated under vehicle conditions. The ageing data is collected from cycling tests of two battery chemistries, Lithium Fer Phosphate (LFP) and Nickel Manganese Cobalt (NMC), …

An Explainable Cs-Mitigation Triangular (Ecsmt) Framework To Secure Graph Neural Networks, Sabah Ettahri, Sergio Pallas Enguita, Chung-Hao Chen, Wen-Chao Yang

Electrical & Computer Engineering Faculty Publications

This research addresses cyber risk by defending against backdoor attacks on Graph Neural Networks (GNNs). We propose the Explainable Complex System-Mitigation Triangular (ECSMT) Framework, which integrates Robust Training, Graph Regularization, and Data Sanitization into a lightweight, hardware-efficient defense layer. To evaluate structural generalizability, we conducted empirical evaluations across three distinct benchmark domains (AIDS, MUTAG, and PROTEINS) using a Graph Isomorphism Network (GIN) backbone. Under a baseline 5% backdoor subgraph trigger injection ratio, ECSMT achieves excellent utility retention, securing a Clean Accuracy (CA) of 97.33% (±0.62%) while reducing the Attack Success Rate (ASR) from 97.00% down to 69.45% on the primary …

Dynamic Direct Voltage Control Under Maximum Torque Per Ampere For Interior Pmsms, Mohamad Alzayed, Hicham Chaoui, Alaref Elhaj

Electrical & Computer Engineering Faculty Publications

A novel method for controlling the speed of interior permanent magnet synchronous motors (IPMSMs), known as the current-sensing-based dynamic direct voltage control method under the maximum torque per ampere (MTPA) concept, is introduced. This technique achieves precise tracking of machine velocity by determining the optimal combination of voltage amplitude and angle for each specific motor velocity and current/load condition. Unlike previous studies, this approach takes into account the transient model of the machine, resulting in improved accuracy during dynamic operating conditions compared with existing methods in the literature. Moreover, a comparative analysis is conducted involving different direct voltage MTPA speed …

Generalized Inverter Fault Detection Using Normalized Current Features And A Lightweight Bilstm Network, Mohammad Zamani Khaneghah, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Fault detection and diagnosis of three-phase inverter-fed motor drives is essential for ensuring system reliability, safety, and continuous operation in applications such as electric vehicles and industrial automation. This paper proposes a data-driven fault detection framework based on normalized current features and a lightweight bidirectional long short-term memory (BiLSTM) network which can be generalized to different motor power rating in the same controller system. A compact set of six time-domain features, consisting of the mean and root-mean-square (RMS) values of the phase currents, is extracted and normalized with respect to the average RMS value. This normalization effectively removes dependency on …

Automated Writer And Acquisition-Condition Classification Of Digitally Captured Handwriting Using Statistical Dynamic Features And Support Vector Machines, Long-Huang Tsai, Hsiang-Ju Lai, Wen-Chao Yang, Jiajun Jiang, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

Digitally captured handwriting preserves pen trajectories and dynamic signals, but it also records hardware- and input-dependent properties that can confound forensic interpretation. This study revises a support vector machine (SVM) screening framework using 16,500 samples from 30 writers, 11 writing-content categories, and five acquisition conditions spanning three tablets and stylus or finger input. Twenty-four raw and derived time-series variables were summarized by maximum, minimum, mean, median, and standard deviation, yielding 120 features; the mode statistic was removed. Writing direction and angular velocity were recalculated with atan2-based vector formulas. Unavailable device/API channels were encoded as zero, and Z-score parameters were estimated …

A Portable Potentiostat Integrated With A Pt/Zno/Lig Electrode For Non-Enzymatic Glucose Detection, Reagan Aviha, Gymama Slaughter

Center for Bioelectronics Publications

Continuous glucose monitoring is critical for effective diabetes management; however, conventional benchtop potentiostats are bulky, costly, and unsuitable for decentralized point-of-care (PoC) applications. To address these limitations, this work presents a miniaturized, low-cost electrochemical sensing platform integrating a non-enzymatic glucose sensor with a portable potentiostat. The sensing electrode is based on laser-induced graphene modified with zinc oxide and platinum nanostructures via electrodeposition to enable sensitive glucose detection under physiological conditions. A custom-designed portable potentiostat was developed to control electrode potentials and perform electrochemical measurements, and its performance was experimentally validated against a commercial Metrohm system. Glucose detection was evaluated using …

Modern Potentiostat Architectures For Electrochemical Sensing: Design, Integration, And Future Directions, Reagan Aviha, Gymama Slaughter

Center for Bioelectronics Publications

Potentiostats are essential to electrochemical sensing, enabling precise control of electrode potentials and measurement of current responses. As demand grows for portable, wearable, and point-of-care systems, potentiostat design has evolved from benchtop instruments to compact, low-power, and wirelessly connected platforms. This review provides a comprehensive, system-level perspective on modern potentiostat architectures, covering operational principles, analog front-end design, signal generation and acquisition, communication protocols, and software integration. Unlike prior reviews that treat these aspects independently, this work integrates electrochemical theory with electronic design and data communication frameworks. Key components, including operational amplifiers, transimpedance amplifiers, DAC/ADC subsystems, and microcontroller-based control, are examined …

A Digital Calibration Source For 21 Cm Cosmology Telescopes, Kalyani Balkrishna Bhopi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Precise calibration of radio telescope beams and gains is a central requirement for 21 cm intensity mapping experiments, which aim to measure large scale cosmological structure through the redshifted emission line of neutral hydrogen. Bright astrophysical foregrounds dominate the sky at these frequencies, and separating them from the cosmological signal demands precise control over instrumental systematics, particularly the telescope beam and its frequency-dependent response. Existing aerial calibration sources are incoherent broadband emitters, detectable only as total power. They provide no direct phase information and suffer from poor sensitivity in low signal-to-noise regimes.

We present the Precision Emitter for 21cm Array …

Hyperglycemia Detection From Sigle - Lead Ecg Using A Hybrid Cnn & Transformer Model, Adam Ayomikun Ogunjembola

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract
Hyperglycemia Detection from Single-Lead ECG using a Hybrid CNN & Transformer Model
Adam Ogunjembola

Diabetes Mellitus is known as high blood glucose. This high blood glucose level happens when the body has a problem with producing or using insulin. Insulin is a very important hormone that the pancreas makes to control how much glucose gets into the bloodstream and cells. Diabetes Mellitus has an effect on the body if it is not treated, such as damaging the blood vessels and nerves which can lead to stroke, kidney failure, heart attack and permanent loss of vision. Since people with diabetes …

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Deep-Learning-Based Generation Of Synthetic Contactless Fingerphotos, Christopher Harry Burton

Graduate Theses, Dissertations, and Problem Reports (ETD)

The collection of biometric data is a labor-intensive, high-resource process that presents significant logistical, privacy, and cost barriers for researchers and developers. To address these challenges, the biometrics community has increasingly turned to generative models capable of producing synthetic datasets that reflect the statistical properties of real data. While substantial progress has been made in synthetic fingerprint generation for contact-based modalities, the contactless fingerphoto domain has remained largely underserved. This work presents a deep learning-based approach to synthetic contactless fingerphoto generation using a Stable Diffusion model guided by multimodal conditions (text and image). The dataset used for training was collected …

Deep Learning For Wireless Communications, Swarada Ajit Kulkarni

Electrical Engineering Dissertations

The rapid evolution of wireless communication imposes stringent requirements for ultra-reliable, low-latency transmission in dynamic, interference-prone environments. Traditional model-driven signal processing struggles to adapt to nonlinear hardware effects, time-varying channels, and complex interference patterns. Deep learning (DL) offers a transformative, data-driven alternative, enabling end-to-end optimization and robust adaptation under uncertain propagation conditions.

This dissertation investigates deep learning architectures for intelligent and resilient wireless communication through three complementary contributions. The first introduces a Vision Transformer (ViT)-based modulation classification framework that leverages self-attention to capture local and global dependencies in spectrogram representations of Quadrature Amplitude Modulation (QAM) signals. The ViT achieves superior …

Fairness Without Demographic Attributes In Medical Vision–Language Models, Ahsan Habib Akash

Graduate Theses, Dissertations, and Problem Reports (ETD)

Vision–language models (VLMs) and the embedding models that underlie them have become the default representation layer for multimodal artificial intelligence. Trained by contrastive alignment over enormous, loosely curated image–text corpora, they inherit the demographic skew of that data, and they encode it in the geometry of the shared embedding space itself. The consequence is a model that performs unevenly across demographic groups even when no protected attribute is ever supplied as an input. In consumer applications this is an equity problem; in medicine it is a safety problem, because an embedding that is systematically less discriminative for one subpopulation translates …

Printer For Music Box, Chad Lewis, Caleb Murawski, Zion Smith, Bryan Tibbs

Williams Honors College, Honors Research Projects

The traditional method of creating music box sheet music involves manually punching holes into a paper strip using a hand-operated hole punch. This process involves precise knowledge of each note’s location and the ability to achieve perfect accuracy for hours.

The goal of this system is to automate this process, significantly reducing the time required while greatly improving the accuracy of the resulting music box playback. The user simply uploads a MIDI file of their choice into a user-friendly application. Here, the file is modified based on the user’s needs and sent to an automated hole-punching system to punch the …

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Aquaflow Pro, Ashton Henley, Jeannie Fritz, Khalin Rubbo

Williams Honors College, Honors Research Projects

Changing aquarium water is a hassle, and when done incorrectly, it will result in changes in water quality and potential harm to aquatic life. Aquarium water changes are crucial in removing toxins such as ammonia, nitrites, and nitrates. There is a need for an automated, stressless fish tank water-changing solution that ensures aquatic safety. To this end, an automatic temperature-controlled fish tank water changing system was designed, carrying out a water change for a designated main tank in which water heated within an inbound reservoir is pumped into the tank to replace the outbound water, responding to both the tank’s …