Digital Commons Network^™

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

The Sleep Effects Of Construction Management Students At Cal Poly Slo, Riley James Coalwell

Construction Management

Sleep deprivation and poor sleep quality have become increasingly common among college students, particularly in demanding studies such as construction management. This study examined sleep patterns, sleep duration, and perceptions related to sleep deprivation among construction management students at California Polytechnic State University, San Luis Obispo. The study replicated prior research conducted at Mississippi State University while focusing exclusively on one academic program and institution. A quantitative research method was used through an anonymous Microsoft Forms survey distributed to construction management students over a ten-week period. The survey collected demographic information, sleep behaviors, academic workload, and perceptions regarding sleep within …

Mechanics And Physical Attributes Of Nature-Based Alterations: Rock Reinforcement And Urban Heat Island Assessment, Mary Chikondi Ngoma

Dissertations

Ground improvement is critical to geotechnical and geo-engineering systems, where modification of the properties of geomaterials (rocks and soils) is required to maintain stability and prevent failure of infrastructure installed within and around them. This need has become increasingly important with rapid urbanization and population growth, which intensify demands on surface and subsurface systems and further challenge the performance of supporting geomaterials. As a result, there is growing interest in nature-based solutions, particularly biologically mediated processes such as biocementation, which can enhance the physical, hydraulic, and mechanical properties of geomaterials while offering environmentally sustainable alternatives to conventional ground improvement techniques. …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Investigating Workforce Development Gaps In Tribal Transportation Agencies, Benson Long Jr

Civil Engineering ETDs

Tribal transportation programs face challenges in recruiting and retaining qualified staff, prompting reliance on external consultants for key responsibilities. This study explores how workforce constraints and organizational structures influence tribal outsourcing decisions. Survey data from 57 tribes informed a logistic regression model examining how geographic isolation, population size, training access, and the presence of a transportation department affect preferences for internal work, actual task completion, and instances where tribes intended to perform tasks in-house but outsourced instead. Findings indicate that outsourcing is driven by limited internal capacity, including staffing shortages, lack of certified personnel, and training opportunities. Geography also plays …

Incorporating Sustainable Strategies And Practices Into The City Improvements Plan Of Madisonville, Kentucky To Better Suit It For The Changing World, Cade R. Howell

Honors College Theses

This project aims to make the case for city improvements in Madisonville, Kentucky by using successful strategies implemented by other cities across the region. These strategies include sidewalk improvements, the installation of roundabouts and parking garages, increased walkability and beautification, and a restructuring of the types of cars predominantly used in the area. The strategies would be implemented from least expensive to most expensive, and in a way that gets the communities involved as much as possible. By using these strategies, Madisonville can better prepare itself for a more sustainable future.

Response Surface Modelling And Multi-Objective Optimisation Of Asphalt Binder And Mixture Properties Modified With Reclaimed Automotive Lubricants And Waste Glass Bottle Powder, Nura Shehu Aliyu Yaro, Jacob Adedayo Adedeji, Luvuno Nkosinathi Jele, Nasir Khan, Aliyu Usman, Jacob Olumuyiwa Ikotun

Journal of Sustainable Construction Materials and Technologies

Large volumes of reclaimed automotive lubricant (RAL) and waste glass bottle powder (WGBP) are disposed of inappropriately, causing serious environmental concerns. Furthermore, the paradigm shift towards sustainability in the pavement industry has prompted academics to investigate alternatives to conventional materials. As a result, one possible approach is to use these waste products as alternative materials in the asphalt pavement sector. This study investigated the combined use of RAL and WGBP as complementary modifiers, extending beyond the conventional single-modifier approaches reported in previous studies. Thus, in this study, response surface methodology (RSM) was utilised to optimise and predict the synergistic effects …

Inconsistencies Emerge Between Regional And Local-Scale Water Security Metrics At Military Installations, Abigail Birnbaum, Michael L. Berg, Caitlin Grady, Daniel J. Weeks, Christopher M. Chini

Faculty Publications

Recent United States federal policy for military installations has emphasized the importance of developing a standardized approach for water security assessment to monitor changes in water resources and the ability for an installation to meet both its civilian and mission needs. For military installations in the United States, these assessments must consider demands both inside and outside the installation’s fence line, as regional resources are required to meet mission readiness. Focusing on physical water scarcity, this study compares four water security metrics with unique formulations and spatial resolutions, including an installation-scale metric and multiple regional metrics defined for either baseline …

Uav Blast Load Characterization For Structural Design, Jalee Grace Spain

Civil Engineering Undergraduate Honors Theses

As the use of drones, or UAVs, increases, so does the risk of collision with infrastructure. When drones collide with a building, an impact or blast load is applied. Using current literature and structural analysis, a load case can be defined for a blast load induced by a drone.

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Robustness Of Vision Language Models For Pedestrian Detection Tasks, Ostonya K. Thomas

All Theses

Autonomous vehicle (AV) systems typically employ modular systems in which discrete components handle separate tasks such as perception, computation, and path planning. While flexible, this approach allows errors to propagate and compound across the pipeline, and many AI systems offer little transparency into their internal decision-making. Such limitations are particularly concerning in safety-critical domains where failures can carry lethal consequences. Vision Language Models (VLMs) have emerged as a promising alternative because they support end-to-end implementations that bypass compounding error risks and provide natural language explanations of their outputs. Despite these advantages, prior research has demonstrated that both computer vision systems …

Optimization Of The Baffle Geometry Of A Circular Culvert Outlet Structure To Maximize Energy Dissipation, Kiarash Shirmahi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

High-velocity flow at culvert outlets can lead to significant soil erosion and damage to downstream infrastructure, particularly in agricultural regions where land protection is critical. Circular culverts, commonly used in transportation systems, are especially susceptible to this issue due to flow acceleration caused by geometric constraints and installation angles. Despite extensive research on energy dissipation in rectangular culverts, limited attention has been given to circular configurations. This study addresses this gap by evaluating the hydraulic performance of baffle systems designed to reduce outlet energy in circular culverts.

A series of laboratory experiments was conducted using a scaled physical model of …

2026 Workshop On Bridging The Gaps: Tackling Microplastics And Nanoplastics Challenges In Coastal Ecosystems, Shenghua Wu, Kaushik Venkiteshwaran, Melike Dizbay-Onat, Alexandra Stenson, Jinhui Wang, Tina Miller-Way, Ebenezer Nyadjro, Bhuvnesh Bharti, John Weinstein, Yi Bao, Shihui Shen, Valerie Longa, Shenghua Zha, John Cleary, Marty Lind

Workshops

This report presents the findings from the 2026 Workshop on Tackling Microplastics and Nanoplastics (MNPs) in Coastal Ecosystems, which took place in Mobile, Alabama. More than 140 experts from universities, government, industry, and community organizations gathered to address the increasing issue of MNPs in coastal regions.

Model Stormwater Standards 2026, Unh Stormwater Center

UNH Stormwater Center

The purpose of post-construction stormwater management standards is to provide reasonable guidance for the regulation of stormwater runoff to protect local natural resources from degradation and prevent adverse impacts to adjacent and downstream land, property, facilities, and infrastructure. These standards regulate discharges from stormwater and runoff from land development projects and other construction activities to control and minimize increases in stormwater runoff rates and volumes, soil erosion, stream channel erosion, and nonpoint source pollution associated with stormwater runoff.

Exploring The Role Of Video Games In Civil Engineering Education And K-12 Stem Engagement, Jillian S. Codron

Architectural Engineering

Civil engineering education has traditionally emphasized a linear progression from theory to application, with foundational concepts introduced in lecture before being reinforced through laboratory or design experiences. While effective for advanced learners, this approach can limit early engagement for K–12 students who may struggle to connect abstract principles to realworld engineering practice. This project examines the use of video games as interactive, feedback-driven environments for introducing civil engineering concepts and practices to younger learners in more exploratory and accessible ways.

The study pursues four primary objectives: evaluating the educational affordances of selected video games; examining how gaming experiences have influenced …

Factors Affecting Pedestrian-Vehicle Conflicts: An Empirical Analysis, Christo D. Jamo

Honors Scholar Theses

The number of pedestrian deaths increased by 78% between 2009 and 2023, while other motor vehicle crash deaths increased by 13% in the same period [1]. To identify potential pedestrian safety measures, this study analyzed the effects of location-based demographics, pedestrian phasing type, and other physical infrastructure and behavior variables on the probability of pedestrian-vehicle conflicts at signalized intersections, which is a surrogate measure of crash risk. Data were collected from 55 intersections in Connecticut, and the pedestrian-vehicle interactions were classified by severity based on the Swedish Traffic Conflict Technique: undisturbed passage, potential conflict, minor conflict, or serious conflict. Because …

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

A Machine Learning Framework For Early-Stage Cost Estimation Of Transportation Projects, Pritom Paul

Electronic Theses and Dissertations

To address the limitations of traditional planning-level cost estimating methods, such as reliance on statewide averages, heavy reliance on engineering judgment, and high levels of inaccuracy, this study developed two data-driven frameworks and corresponding tools. The first framework focused on resurfacing projects and used treatment-specific simple linear regression based on lane miles and geographic location. The second addressed a broader group of construction projects and used multiple linear regression with project length, route type, and right-of-way cost as key predictors. In both frameworks, the final estimates are computed by aggregating multiple estimates produced by county-, region-, and state-level models. The …

Detecting Sophisticated Cyberattacks On Public Water Infrastructure, Ayrton Purdy

Graduate Theses and Dissertations (2019 - present)

In recent years there has been an increasing number of cyberattacks on public water generation and distribution systems. Advanced persistent attackers could usurp sensors and control systems to contaminate public drinking water. In order to conceal their malicious activity, they can manipulate sensor data flows to give the appearance of normal activity. The compromised sensors would report normal chemical levels even though unsafe water is entering the distribution system. In response, this research proposes a multi-sensor, cross-comparison approach to anomaly detection. The proposed approach is designed to detect sophisticated cyberattacks which are not easily detectable using traditional cyber tools. The …

Developing Fragility Curves For Steel Special Moment-Resisting Frames In Utah, Olivia P. Murphy

All Graduate Theses and Dissertations, Fall 2023 to Present

Major seismic events along the Wasatch Fault represent a serious threat to Utah's residents and built environment. Engineers currently rely on a statistical approach that calculates earthquake ground shaking based on probabilities of various events occurring over extended time periods. This method informs how strong new buildings must be constructed. However, many structural engineering professionals in Utah worry that this probability-based approach may significantly underestimate the actual ground shaking compared to an alternative method that examines the largest possible earthquake a fault can generate. The substantial differences between the two analytical approaches raise fundamental concerns about whether existing construction standards …

Mitigating Inertial Measurement Unit Drift In Quadcopter Trajectory Tracking Using Kalman Filter Sensor Fusion With Global Positioning Measurements, Juan Sandro Caballero Aguilar

Graduate Theses and Dissertations

Unmanned Aerial Vehicles (UAVs) like quadcopters are widely used in civilian and military applications such as farming, photography, search and rescue missions, and autonomous navigation and motion. The performance and stability of these systems depend on accurate state estimation, which provides real-time information about the vehicle’s position, velocity, and orientation. However, achieving reliable state estimation is challenging due to sensor noise, measurement uncertainty, and inaccurate modeling. Common navigation sensors such as the Global Positioning System (GPS) and Inertial Measurement Units (IMUs) exhibit complementary characteristics. GPS provides absolute position measurements but suffers from noise, multipath effects, and low update rates, while …

Thermo-Hydro-Chemical Coupled Numerical Modeling Of Hydrogen-Thermal Co-Development In Hydraulically Fractured Peridotite, Jiacheng Dai, Zhonglin Ma, Yunzhi Yue, Yujie Yuan, Shouceng Tian

Research outputs 2022 to 2026

Hydrogen generation through serpentinization reactions in peridotite formations under high temperature conditions represents a promising avenue for subsurface hydrogen production. However, the thermal energy in the formation environment have not been sufficiently considered. To integrate hydrogen production with thermal energy development, this study develops a thermo-hydro-chemical coupled numerical model, which is used to investigate hydrogen-thermal co-development in hydraulically fractured peridotite. Given that the hydrogen-thermal co-development process involves fluid flow, heat transfer and serpentinization reactions, the governing equations are formulated based on Darcy flow and energy conservation equations, with serpentinization kinetics incorporated through the reactive source terms. To evaluate hydrogen production …

Integrated Geophysical, Geotechnical, And Mineralogical Characterization Of Expansive Weches Formation Soils In East Texas: Implications For Infrastructure Design, Samuel Annobil

Electronic Theses and Dissertations

This study investigates the geotechnical, geophysical, and mineralogical characteristics of soils derived from the Weches Formation in Nacogdoches County, East Texas, with emphasis on the relationships among electrical resistivity, moisture condition, compaction state, and mineralogical composition. The Weches Formation is well known for producing clay-rich, moisture-sensitive soils that pose challenges to subgrade performance because of their plasticity and swelling behavior. Representative soil samples were collected and subjected to laboratory testing, including particle size analysis, Atterberg limits, Standard Proctor compaction, free swell tests, electrical resistivity measurements, and X-ray diffraction (XRD) mineralogical analysis. The soils are predominantly fine-grained and clay-rich, with USCS …

Interpretable Machine Learning For Predicting Splitting Strength Of Asphalt Concrete: Insights From Shap Analysis, Jianglei Xing, Xiao Tan, Yihao Li, Dongzhao Jin, Pengwei Guo, Yuhuan Wang, Huiya Niu

Michigan Tech Publications

This paper proposes an interpretable machine learning approach for predicting the splitting strength of asphalt concrete and supporting data-driven mixture design. A database consisting of 296 samples was constructed, and 14 input variables related to asphalt properties, aggregate gradation, and fiber characteristics were selected for modeling. Eight machine learning models, namely TabPFN, ANN, SVR, RF, XGBoost, LightGBM, FLAML, and FT-Transformer, were developed and compared. The results show that all eight models achieved satisfactory predictive capability, whereas TabPFN overall achieved the best performance in the Monte Carlo cross-validation, with the lowest average RMSE of 0.34 ± 0.10, the lowest average MAE …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Optimization Of Vehicle Mix For Three-And Four-Wheel Passenger Transportation System In Nigeria, Omotunde A. Muyiwa, Hamid A. Jimoh, Kolawole T. Oriolowo

Tanzania Journal of Engineering and Technology (TJET)

Efficient transportation systems are essential for reducing passengers waiting times in densely populated areas. However, there is a dearth of information on the optimization of vehicle mix for three-and four-wheel transportation systems in Nigeria. The present study was designed to optimize the vehicle mix for three-and four-wheel passenger transportation to improve transportation efficiency. Twenty purposively selected vehicles were observed, while a queuing model (M/M/s) was used to determine passenger arrival rates during different periods (morning, afternoon, and evening). An integer linear programming model was developed to minimize passenger waiting times. Data on vehicle types, capacities, travel cycles, and average passenger …

Czts Nanoparticles As Cost Efficient Catalysts For Producing Green Hydrogen, Aidan Hau

Undergraduate Research Symposium (2026- )

Hydrogen gas is produced to be used as feedstock, fertilizer, and fuel. Traditional hydrogen production produces “gray hydrogen” in a process that uses and releases fossil fuels into the atmosphere. One way to produce “green” hydrogen is with renewable energy technologies that produce hydrogen gas using electrolysis without emitting fossil fuels. In electrolysis, the hydrogen atoms bonded to oxygen in a water molecule are split to produce hydrogen. A typical catalyst for this process would be a precious metal like palladium, which can be costly. In order to make green hydrogen production more affordable, an alternative catalyst composed of CZTS …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Analysis Of Soda Production Processes In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov Professor, Djalolitdin Paxritdinovich Mukhitdinov Professor, Fatima Faxritdinovna Iskhakova

Technical science and innovation

This paper provides a comprehensive analysis of the fundamental principles of the classical Solvay process, a key component in the industrial production of soda ash. It is noted that despite its widespread use and technological maturity, the process has a number of significant technological, energy, and environmental limitations associated with high raw material and energy consumption, the generation of significant industrial waste, and CO₂ emissions. The need to modernize the traditional production process to improve efficiency, resource conservation, and environmental sustainability is substantiated. The review systematically summarizes current approaches to process improvement, including modified versions of the Solvay process, the …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …