Systems Engineering Commons^™

Investigating Applications Of Deep Learning For Diagnosis Of Post Traumatic Elbow Disease, Hugh James

McKelvey School of Engineering Graduate Student Theses & Dissertations

Traumatic events such as dislocation, breaks, and arthritis of musculoskeletal joints can cause the development of post-traumatic joint contracture (PTJC). Clinically, noninvasive techniques such as Magnetic Resonance Imaging (MRI) scans are used to analyze the disease. Such procedures require a patient to sit sedentary for long periods of time and can be expensive as well. Additionally, years of practice and experience are required for clinicians to accurately recognize the diseased anterior capsule region and make an accurate diagnosis. Manual tracing of the anterior capsule is done to help with diagnosis but is subjective and timely. As a result, there is …

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall

Theses and Dissertations

Studies have shown that 70 – 80% of a product's life cycle costs are committed by the end of the product design phase (Anderson, 2014; National Research Council, 1991; Swift, 1987). This supports the general claim that decision making in the conceptual stage drives the cost throughout the life cycle. The use of concurrent engineering has been viewed as the answer to this problem, offering the Design for Excellence (DFX) as one approach for evaluating product designs across specific disciplines. This research focuses on a subset of DFX referred to as Design for Manufacturability to develop a means to assess …

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Multiple Heat Exchanger Cooling System For Automotive Applications – Design, Mathematical Modeling, And Experimental Observations, Zaker Syed

All Dissertations

The design of the automotive cooling systems has slowly evolved from engine-driven mechanical to computer-controlled electro-mechanical components. With the addition of computer-controlled variable speed actuators, cooling system architectures have been updated to maximize performance and efficiency. By switching from one large radiator to multiple smaller radiators with individual flow control valves, the heat rejection requirements may be precisely adjusted. The combination of computer regulated thermal management system should reduce power consumption while satisfying temperature control objectives. This research focuses on developing and analyzing a multi-radiator system architecture for implementation in ground transportation applications. The premise is to use a single …

Using Reinforcement Learning To Improve Network Reliability Through Optimal Resource Allocation, Henley Wells

Graduate Theses and Dissertations

Networks provide a variety of critical services to society (e.g. power grid, telecommunication, water, transportation) but are prone to disruption. With this motivation, we study a sequential decision problem in which an initial network is improved over time (e.g., by adding or increasing the reliability of edges) and rewards are gained over time as a function of the network’s all-terminal reliability. The actions during each time period are limited due to availability of resources such as time, money, or labor. To solve this problem, we utilized a Deep Reinforcement Learning (DRL) approach implemented within OpenAI-Gym using Stable Baselines. A Proximal …

A Systems Theory-Based Framework For Environmental Scanning In Complex System Governance, Dale E. Baugh

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a Systems Theory-based framework for Environmental Scanning (ES) in Complex System Governance (CSG) using an inductive research design. Complexity and uncertainty are normal for external environments in which today’s systems (organizations) exist. These environmental characteristics provide impetus for researchers to focus on organizational planning for disruptive external forces that could threaten system stability and future system existence. The ES function supports the requisite governance metasystemic functions to be enabled, executed, and evolved sufficiently well to promote continuous system viability. In this research the functioning of ES was examined from a diverse literature-based …

Hard-Real-Time Computing Performance In A Cloud Environment, Alvin Cornelius Murphy

Engineering Management & Systems Engineering Theses & Dissertations

The United States Department of Defense (DoD) is rapidly working with DoD Services to move from multi-year (e.g., 7-10) traditional acquisition programs to a commercial industrybased approach for software development. While commercial technologies and approaches provide an opportunity for rapid fielding of mission capabilities to pace threats, the suitability of commercial technologies to meet hard-real-time requirements within a surface combat system is unclear. This research establishes technical data to validate the effectiveness and suitability of current commercial technologies to meet the hard-real-time demands of a DoD combat management system. (Moreland Jr., 2013) conducted similar research; however, microservices, containers, and container …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

Using Strategic Options Development And Analysis (Soda) To Understand The Simulation Accessibility Problem, Andrew J. Collins, Ying Thaviphoke, Antuela A. Tako

Engineering Management & Systems Engineering Faculty Publications

Simulation modelling is applied to a wide range of problems, including defense and healthcare. However, there is a concern within the simulation community that there is a limited use and implementation of simulation studies in practice. This suggests that despite its benefits, simulation may not be reaching its potential in making a real-world impact. The main reason for this could be that simulation tools are not widely accessible in industry. In this paper, we investigate the issues that affect simulation modelling accessibility through a workshop with simulation practitioners. We use Strategic Options Development and Analysis (SODA), a problem-structuring approach that …

Study Of Stochastic Market Clearing Problems In Power Systems With High Renewable Integration, Saumya Sakitha Sashrika Ariyarathne

Operations Research and Engineering Management Theses and Dissertations

Integrating large-scale renewable energy resources into the power grid poses several operational and economic problems due to their inherently stochastic nature. The lack of predictability of renewable outputs deteriorates the power grid’s reliability. The power system operators have recognized this need to account for uncertainty in making operational decisions and forming electricity pricing. In this regard, this dissertation studies three aspects that aid large-scale renewable integration into power systems. 1. We develop a nonparametric change point-based statistical model to generate scenarios that accurately capture the renewable generation stochastic processes; 2. We design new pricing mechanisms derived from alternative stochastic programming …

Supporting The Discovery, Reuse, And Validation Of Cybersecurity Requirements At The Early Stages Of The Software Development Lifecycle, Jessica Antonia Steinmann

Doctoral Dissertations and Master's Theses

The focus of this research is to develop an approach that enhances the elicitation and specification of reusable cybersecurity requirements. Cybersecurity has become a global concern as cyber-attacks are projected to cost damages totaling more than $10.5 trillion dollars by 2025. Cybersecurity requirements are more challenging to elicit than other requirements because they are nonfunctional requirements that requires cybersecurity expertise and knowledge of the proposed system. The goal of this research is to generate cybersecurity requirements based on knowledge acquired from requirements elicitation and analysis activities, to provide cybersecurity specifications without requiring the specialized knowledge of a cybersecurity expert, and …

Value Focused Thinking Analysis Of C-Band Australia Radar Operations, Samuel Ray Grothman

Theses and Dissertations

The radars used for Space Domain Awareness (SDA) are inherently all-weather, day/night sensors capable of around the clock operations. Despite this fact, some radars are operated for fewer than their maximum operating capabilities. The decision-making process for selecting the operating hours of a sensor has historically been based on only a few factors or just one. This research uses the techniques in Value Focused Thinking to develop an evaluation process to score possible alternatives and find the alternative with the most value for the decision maker. By investigating the value that is added by operating an SDA radar, it is …

A Methodological Framework For Parametric Combat Analysis, Dustin L. Hayhurst Sr.

Theses and Dissertations

This work presents a taxonomic structure for understanding the tension between certain factors of stability for game-theoretic outcomes such as Nash optimality, Pareto optimality, and balance optimality and then applies such game-theoretic concepts to the advancement of strategic thought on spacepower. This work successfully adapts and applies combat modeling theory to the evaluation of cislunar space conflict. This work provides evidence that the reliability characteristics of small spacecraft share similarities to the reliability characteristics of large spacecraft. Using these novel foundational concepts, this dissertation develops and presents a parametric methodological framework capable of analyzing the efficacy of heterogeneous force compositions …

Assessing Readiness For Implementation Of Prognostics And Health Management In Small And Medium Enterprises, Sara C. Fuller

Theses and Dissertations

Prognostics and Health Management (PHM) refers to using robust sensing, monitoring, and control to detect, assess, and track system health degradation and failure modes, allowing for enhanced management and operational decisions. The need for PHM within a manufacturing facility has increased due to a variety of reasons, such as the increasing complexity of manufacturing equipment.

A lack of readiness for digital implementations is linked to failure. The literature highlights certain barriers and enablers that can signal whether a technology implementation will be successful, such as management and maintenance employees’ desire to change the existing process, an understanding and willingness to …

Deep Learning Applications In Industrial And Systems Engineering, Winthrop Harvey

Graduate Theses and Dissertations

Deep learning - the use of large neural networks to perform machine learning - has transformed the world. As the capabilities of deep models continue to grow, deep learning is becoming an increasingly valuable and practical tool for industrial engineering. With its wide applicability, deep learning can be turned to many industrial engineering tasks, including optimization, heuristic search, and functional approximation. In this dissertation, the major concepts and paradigms of deep learning are reviewed, and three industrial engineering projects applying these methods are described. The first applies a deep convolutional network to the task of absolute aerial geolocalization - the …

Development Of New Space Systems Architecture In Sysml Using Model-Based Pattern Language, Bhushan Lohar

Graduate Theses and Dissertations (2019 - present)

This manuscript presents an approach to the application of the Model-Based Systems Engineering (MBSE) and Model-Based Systems Architecting (MBSA) principles to develop a Model-Based Pattern Language (MBPL). It takes considerable time for systems engineers and mission architects to develop a new system from scratch, particularly new space-based systems derived from the existing space system architectures. The use of a pattern language which is a holistic view of reusable logical model artifacts, can improve the process.

The main benefit of the pattern language is to reduce the time and validation required to generate a new space-based system architecture; this approach will …

Predictors Of Email Response: Determinants Of The Intention Of Not Following Security Recommendations, Miguel Angel Toro-Jarrin

Engineering Management & Systems Engineering Theses & Dissertations

Organizations and government leaders are concerned about cyber incidents. For some time, researchers have studied what motivates people to act in ways that put the confidentiality, integrity, and availability of information in organizations at risk. Still, several areas remained unexplored, including the role of employees’ evaluation of the organizational systems and the role of value orientation at work as precursors of secure and insecure actions in relation to information technologies (information security [IS] action). The objective of this research project was to examine how the evaluations of formal and informal security norms are associated with the intention to follow them …

Autonomous Vehicles On The Smart Roads: Challenges And Potentials, Laura Cristancho, Baleki Campbell, Mahyar Amirgholy

The Kennesaw Journal of Undergraduate Research

Self-driving vehicles and smart roads are not new concepts. These ideas have been discussed for many years but for much of this time, the required technology was not available to make them a reality. Just recently has our technology caught up to our ideas and we are beginning to see progress towards the realization of the automated highway system. As the transition to a complete automated system is still in progress, this leaves many questions that still need to be answered as well as allowing for novel solutions to be presented. Using modern research papers to formulate a sound basis …

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, Akkarakaran Francis Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increas- ing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can …