The Design, Testing, And Manufacturing Of A Pin Fin Extrusion Heat Sink, Arash Michael Mira

Industrial and Manufacturing Engineering

My senior project focuses on the design, testing, and manufacturing of pin fin extrusion heat sinks that are you used to cool simple electronic applications across a multitude of markets. Without the modern day heat sink, electronics that we have become familiar with throughout our everyday lives will cease to exist. I will design these heat sinks using Solid Works 3D CAD. I will then test the heat sinks using ICEPAK CFD software, where I will model the heat sink against a 5 watt application, inside of a cabinet that models the chassis of a computer. After receiving these results, …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Evaluation And Design Of Potting Production Process Improvements For The Non-Profit Organization, Growing Grounds Farm, Maiya Avalon Bourland, Precilla Tang

Industrial and Manufacturing Engineering

This report focuses on the potting production process for the non-profit organization (NPO) Growing Grounds Farm (GGF), and aims to promote a standardized workflow system to enhance the working experience for Transitions‐Mental Health Association employees and volunteers. This project takes careful consideration into the process improvements proposed so to support the double bottom line of economic and social objectives. To address the equally important objectives, the Human Centered Design toolkit created by IDEO, specifically for third sector organizations, was integrated with the traditional Industrial Engineering design process methodology. Feasible alternatives were developed and evaluated based on the objectives. The selected …

Design Of An Automated Employee Scheduling System, Matthew Cameron, Yuriy Goldman

Industrial and Manufacturing Engineering

Many retail stores, as well as other organizations that employ a multitude of part-time employees, rely on developing schedules frequently, since the availabilities of the employees as well as the needs of the business change often. This process is often performed on a weekly basis, and is complex and time-consuming. The schedule must typically satisfy numerous requirements, including business needs, legal restrictions, and employee availability constraints. As a result, errors are common, and employee time that could have been spent on improving sales or operations is instead consumed by the scheduling task.

This project explores two solution methods for this …

Atk's Radial Airframe Forming Process Assessment, Andres Martinez

Industrial and Manufacturing Engineering

The purpose of this project was to provide ATK with a solution to increase efficiency in the R-02 radial forming center so that it could meet the increase in demand projected for the next 5 years. In addition, give ATK projected dates of when new machines would need to be implemented to be able to keep up with the demand. The system was analyzed through time studies to identify areas of possible improvement and eliminate any non-value added activities. Cycle times of each activity were used to simulate the current state of the system using ProModel software. Changes in operations …

Restaurant Design: An Industrial Engineering Perspective, Joseph Travis Spanu

Industrial and Manufacturing Engineering

The objective of this paper is to design a health food restaurant using current industrial engineering tools and practices. This includes creating a menu, determining the average gross profit per customer, determining the location, designing a 3-d layout, simulating service, and analyzing local food supply chains. Using a simplified menu and pricing quotes from a food distributor, the average gross profit per customer is estimated to be $3.50. Location is determined by comparing the predicted number of customers and the cost to rent at two different areas. A downtown location is determined to gross approximately $5,200 per month over a …

3d Object Recognition Based On A Geometrical Topology Model And Extreme Learning Machine, Rui Nian, Bo He, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, One Geometrical Topology Hypothesis is Present based on the Optimal Cognition Principle, and the Single-Hidden Layer Feedforward Neural Network with Extreme Learning Machine (Elm) is Used for 3d Object Recognition. It is Shown that the Proposed Approach Can Identify the Inherent Distribution and the Dependence Structure for Each 3d Object Along Multiple View Angles by Evaluating the Local Topological Segments with a Dipole Topology Model and Developing the Relevant Mathematical Criterion with Elm Algorithm. the Elm Ensemble is Then Used to Combine the Individual Single-Hidden Layer Feedforward Neural Network of Each 3d Object for Performance Improvements. the …

Acuta Enews March 2013 Vol. 42, No. 3

ACUTA Newsletters

In this issue...

1 Meet the 2014 Board

2 Connexity

3 What's on Your Desk?

3 New State/Province Coordinators

4 Second Annuall ResNet Report The App Is Back-Better than Ever!

5 Info Links

6 Members Celebrate Anniversaries

8 FCC 6 the Enterprise

9 Congratulation to Brian Yamaguchi

10 Board Report

10 Compliance Alliance: First Anniversary

11 Welcome New Members

11 Check It Out

Women's High Heel Discomfort Analysis And Prototype Solution, Kevin Blakley, Annamarie Kepple

Industrial and Manufacturing Engineering

ABSTRACT

WOMEN’S HIGH HEEL DISCOMFORT ANALYSIS AND SOLUTION

Kevin Blakley and Annamarie Kepple

Women love high heeled shoes, but this love comes at the cost of comfort. Wearing high heels causes a lot of pain and, in the long term, health complications. This project tries to overcome the problem by ultimately making high heels more comfortable. In order to do this, one must first understand the reasons that high heels are uncomfortable, such as arch angle, heel height, and the changes in walking motion. Once there is a true understanding of the factors that contribute to high heel discomfort, the …

Polyparking, Christopher Blackmer, Michael Suttie

Biomedical Engineering

The purpose of this senior project is to analyze the various options for the implementation of a parking lot information system on the California Polytechnic State University, San Luis Obispo campus. This system would involve three main components: physical counting hardware, a database and analysis organization system, and a user interface for disseminating the gathered information. The project investigates and provides commentary on various available and commonplace systems, and the benefits and drawbacks of these systems. During the course of the project, a flexible database and user-interface was developed in Microsoft Access, which will allow counter output to be gathered …

Rfid Technology Selection And Economic Justification For Healthcare Asset Tracking, Tyler Robert Peabody, Tali Freed

Master's Theses

Although Radio Frequency Identification (RFID) and Real-Time Location System (RTLS) technologies for inventory tracking have been growing in popularity, the healthcare industry has been reluctant to adopt these technologies. One of the primary reasons for this lack of enthusiasm has been the risk associated with electromagnetic interference between RFID/RTLS systems and medical equipment functionality. The other reason has been the substantial cost and complexity of implementing RFID/RTLS in healthcare organizations. In this study, we show that there are several ways to safely install RFID/RTLS systems to improve the inventory management processes of hospitals and clinics. We then analyze the inventory …

Deterioration Of Metal–Organic Framework Crystal Structure During Fabrication Of Poly(L-Lactic Acid) Mixed-Matrix Membranes, Ajay Kathuria, Mohamad G. Abiad, Rafael Auras

Industrial Technology and Packaging

Poly(l-lactic acid) (PLLA) and metal–organic framework (MOF) mixed-matrix membranes were prepared by melt extrusion of PLLA with 5% (w/w) of either activated or water-saturated Cu₃(BTC)₂ (Cu₃(C₉H₃O₆)₂(H₂O)₃·xH₂O, HKUST-1). The morphology and the stability of injection-molded samples were evaluated using thermogravimetric analysis, differential scanning calorimetry, gel permeation chromatography, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The presence of activated and saturated MOF crystals increased the cold crystallization onset temperature as compared to neat PLLA. This can be attributed to the …

Location And Capacity Modeling Of Network Interchanges, Aldo D. Fabregas

USF Tampa Graduate Theses and Dissertations

Network design decisions, especially those pertaining to urban infrastructure, are made by a central authority or network leader, and taking into consideration the network users or followers. These network decision problems are formulated as non-linear bi-level programming problems. In this work, a continuous network design problem (CNDP) and discrete network design problem (DNDP) bi-level optimization programs are proposed and solved in the context of transportation planning. The solution strategy involved reformulation and linearization as a single-level program by introducing the optimality conditions of the lower level problem into the upper level problem. For the CNDP, an alternative linearization algorithm (modified …

Acuta Enews February 2013 Vol. 42, No. 2

ACUTA Newsletters

In this issue...

1 Meeting Member Needs with Excellence

2 Remembering Luther Robb

2 New Phone System for ACUTA Office

3 Info Links

3 Look, Everybody: Lori's Back!

4 What's on Your Desk Today?

5 Why Fax over IP Fails

6 Networks and a Single Point of Failure

7 Turning Big Data into Big ldeas

7 Thanks to Journal Advertisers for 2012

8 Board Report

8 Bring 8 Winter Seminar Sessions to Your Desktop or Tablet

8 Thanks to Winter 2013 Seminar Exhibitors and Sponsors

9 Welcome New Members

9 Check It Out

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice, Frank Palisi, Kathryne Newton, Edward Sweeney

Conference papers

This research study illustrates the importance of sustainable purchasing practices for organizations in the U.S. distribution industry and answers several important questions: what is the current awareness of U.S. organizations regarding sustainable purchasing practices; to what extent are U.S. organizations evaluating, selecting, and retaining suppliers based upon sustainable purchasing practices; and to what extent are sustainable purchasing practices being implemented by the U.S. organizations under study? With an ever increasing global economy, is it critically important for organizations to put in place sustainability practices; the biggest impact organizations can make is often in an organization’s purchasing department. The researcher begins …

Where Next For Supply Chain Management?, Des Lee

Books/Book chapters

Supply chain management (SCM) has been so successful that it is largely taken for granted. Its success has been built on improving three key flows – of product, of money and of information – and on one core principle – core competence. What next for SCM? This article outlines the vulnerabilities that are embedded in modern supply chains and the unintended consequences of outsourcing activities that are not core competences. These consequences are global and have the potential to undermine past achievements. Finally, broad suggestions are made as to how these issues can be addressed and the areas on which …

Adequate Ventilation: How Is It Defined And Does It Adequately Warn Consumers?, Christopher Blankenship

Theses, Dissertations and Capstones

The purpose of this research was to clarify and define the term “adequate ventilation.” Upon looking at regulations, court cases, and other elements, it is clear that the term is inadequate to inform consumers and does not instruct consumers on how to achieve proper ventilation. To find out if consumers understand this, random persons were asked to define it. The answers were given a numerical value to show the knowledge trend. The outcome showed that most people do not understand how to achieve proper ventilation. Conclusion: Diagrams showing how to set up a room with ventilation and new instructions are …

S-Stem Scholars, A Second Generation: Support For At-Risk Upper Division And Transfer Students In Ceas, Andrew A. Kline, Betsy M. Aller

Academic Leadership Academy

Begun in 2010, the S-STEM Scholar Program increases opportunities for financially needy but academically talented students. These students:

•Are first-time, first year students •Demonstrate financial need through FAFSA applications

•Will enter a major in the College of Engineering and Applied Sciences

•Have a math ACT of 24 or above

Student awardees receive up to $3,000 per semester, and continue to receive this amount for up to eight semesters with continued academic success and progress to degree.

Preemptive Resume Priority Call Center Model With Two Classes Of Map Arrivals, Srinivas R. Chakravarthy, M. Senthil Kumar, R. Arumuganathan

Industrial & Manufacturing Engineering Publications

Generally in call centers, voice calls (say Type 1 calls) are given higher priority over e-mails (say Type 2 calls). An arriving Type 1 call has a preemptive priority over a Type 2 call in service, if any, and the preempted Type 2 call enters into a retrial buffer (of finite capacity). Any arriving call not able to get into service immediately will enter into the pool of repeated calls provided the buffer is not full; otherwise, the call is considered lost. The calls in the retrial pool are treated alike (like Type 1) and compete for service after a …

Technology Adoption In Small And Medium-Sized Logistics Providers, Pietro Evangelista, Alan Mckinnon, Edward Sweeney

Articles

Purpose - The main aim of the research is to shed light on the role of information and communication technology (ICT) in the logistics innovation process of small and medium- sized third party logistics providers (3PLs).

Design/methodology/approach – A triangulated research strategy was designed using a combination of quantitative and qualitative methods. The former involved the use of a questionnaire survey of small and medium-sized Italian 3PLs with 153 usable responses received. The latter comprised a series of focus groups and the use of seven case studies.

Findings – There is a relatively low level of ICT expenditure with few …