Operations Research, Systems Engineering and Industrial Engineering Commons^™

Understanding The Impact Of Large-Scale Power Grid Architectures On Performance, Ange-Lionel Toba

Engineering Management & Systems Engineering Theses & Dissertations

Grid balancing is a critical system requirement for the power grid in matching the supply to the demand. This balancing has historically been achieved by conventional power generators. However, the increasing level of renewable penetration has brought more variability and uncertainty to the grid (Ela, Diakov et al. 2013, Bessa, Moreira et al. 2014), which has considerable impacts and implications on power system reliability and efficiency, as well as costs. Energy planners have the task of designing infrastructure power systems to provide electricity to the population, wherever and whenever needed. Deciding of the right grid architecture is no easy task, …

Uas Pilots Code – Annotated Version 1.0, Michael S. Baum, Kristine Kiernan, Donald W. Steinman, Ryan J. Wallace Ed.D.

Publications

The UAS PILOTS CODE (UASPC) offers recommendations to advance flight safety, ground safety, airmanship, and professionalism.6 It presents a vision of excellence for UAS pilots and operators, and includes general guidance for all types of UAS. The UASPC offers broad guidance—a set of values—to help a pilot interpret and apply standards and regulations, and to confront real world challenges to avoid incidents and accidents. It is designed to help UAS pilots develop standard operating procedures (SOPs), effective risk management,7 safety management systems (SMS), and to encourage UAS pilots to consider themselves aviators and participants in the broader aviation community.

Wavelet Anova Bisection Method For Identifying Simulation Model Bias, Andrew D. Atkinson, Raymond R. Hill, Joseph J. Pignatiello Jr., G. Geoffrey Vining, Edward D. White, Eric Chicken

Faculty Publications

High-resolution computer models can simulate complex systems and processes in order to evaluate a solution quickly and inexpensively. Many simulation models produce dynamic functional output, such as a set of time-series data generated during a process. These computer models require verification and validation (V&V) to assess the correctness of these simulations. In particular, the model validation effort evaluates if the model is an appropriate representation of the real-world system that it is meant to simulate. However, when assessing a model capable of generating functional output, it is useful to learn more than simply whether the model is valid or invalid. …

Semi-Transparent Energy-Harvesting Solar Concentrator Windows Employing Infrared Transmission-Enhanced Glass And Large-Area Microstructured Diffractive Elements, Mikhail Vasiliev, Kamal Alameh, Mohsin Badshah, Seok-Min Kim, Mohammad Alam

Research outputs 2014 to 2021

We report on the study of energy-harvesting performance in medium-size (400 cm²) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the …

A Lab-Based Study Of N95 Ffrs Against Cigarette Smoke Under Varying Concentrations And Sealing Conditions, Jacob Davis

Graduate Theses, Dissertations, and Problem Reports (ETD)

Respirators are a common form of protection when working in environments where workers are exposed to harmful agents. One exposure that has not been rigorously tested is cigarette smoke. Air sampling was conducted to test the effectiveness of four different respirators N95 Respirators for various concentrations of cigarette smoke and seal conditions and for different respirators. The Moldex 2200, Moldex 2300 (exhalation valve), Gerson 1730, and 3M 8210V (Exhalation valve) were used for testing. The set concentrations were 100,000: 200,000: and 400,000 cm3 with an error allowance of 20% for each concentration. Different flow rates (15, 30, 50, and 85 …

Evaluating The Impact Of Adopting 3d Printing Services On The Retailers, Sharareh Rajaei Dehkordi

Dissertations

As additive manufacturing technology becomes more responsive to consumers’ demand, one important question for the retailers is whether they should provide 3D printing services in their brick-and-mortar store in addition to the traditional off-the-shelf product? If so, what should be the retailers pricing scheme to achieve a higher profit? What should be the optimal inventory level of off-the-shelf products? What is the optimal capacity of 3D printers? In this study, stochastic models are examined to capture the joint optimal 3D product price and capacity of 3D printers to maximize retailer’s expected profit while considering consumer product choices. Moreover, a stochastic …

Handling Of Syringe Sharps In A Non-Incineration Health Care Waste Disposal, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

An attempt has been made by the R&D team of the University of Dar es Salaam to design and manufacture two needle cutter prototypes, a manually operated and an automatic needle cutter to be used in rural and urban areas, respectively. This is part of the UNDP and WHO efforts aimed at promoting the non-burn medical waste disposal technologies in developing countries such as Argentina, India, Latvia, Lebanon, Philippines, Senegal, Tanzania and Vietnam. The project also involves designing and manufacturing of the autoclaves for sterilizing of needle cutters and other infectious medical waste. The use of needle cutters in hospitals …

Extrinsic And Intrinsic Control Of Integrative Processes In Neural Systems, Anirban Nandi

McKelvey School of Engineering Graduate Student Theses & Dissertations

At the simplest dynamical level, neurons can be understood as integrators. That is, neurons accumulate excitation from afferent neurons until, eventually, a threshold is reached and they produce a spike. Here, we consider the control of integrative processes in neural circuits in two contexts. First, we consider the problem of extrinsic neurocontrol, or modulating the spiking activity of neural circuits using stimulation, as is desired in a wide range of neural engineering applications. From a control-theoretic standpoint, such a problem presents several interesting nuances, including discontinuity in the dynamics due to the spiking process, and the technological limitations associated with …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Optimizing Production Schedule With Energy Consumption And Demand Charges In Parallel Machine Setting, Farnaz Ghazi Nezami, Mojtaba Heydar, Regina Berretta

Industrial & Manufacturing Engineering Presentations And Conference Materials

Environmental sustainability concerns, along with the growing need for electricity and associated costs, make energy-cost reduction an inevitable decision-making criterion in production scheduling. In this research, we study the problem of production scheduling on nonidentical parallel machines with machine-dependent processing times and known job release dates to minimize total completion time and energy costs. The energy costs in this study include demand and consumption charges. We present a mixed-integer nonlinear model to formulate the problem. The model is then linearized and its performance is tested through numerical experiments.

Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The recent years have witnessed an increased activity in biocompatibility research aimed at limiting biomaterial-induced blood coagulation. From 2008 to 2016, a total of $36,946,764.00 USD was awarded in grants to 213 research proposals and as large as 50.4% ($18,627,854.00) of that award monies were distributed to 101 proposals over the fiscal years of FY14 to FY16 alone. However, the complexity in blood responses to biomaterials, variability in blood function between individuals and animal species, and differences in medical device application and test setting all continue to pose difficulties in making a breakthrough in this field. This review focuses on …

Development And Field Testing Of An Interactive Transit Station Information System (Itsis) Using Connected Vehicle Technologies, Huadong Meng, Jacob Tsao, Kun Zhou, Justin Picar, Bradley Mizuno, Wei-Bin Zhang

Faculty Publications

The objective of Interactive Transit Station Information System (ITSIS) is to better inform transit travelers during their trips and to enable dynamic transit operations to better serve travelers. The ultimate goal is to make transit more friendly and attractive to the traveling population such that transit will become a viable choice for travel and an integrated part of the solution for congestion relief. This report documents a research effort to develop and test a ITSIS prototype that uses Connected Vehicle technologies to enable the real-time interaction between passengers and transit systems at bus stations. The reports summarizes the findings from …

Systematic Review For Water Network Failure Models And Cases, Yufei Gao

Graduate Theses and Dissertations

As estimated in the American Society of Civil Engineers 2017 report, in the United States, there are approximately 240,000 water main pipe breaks each year. To help estimate pipe breaks and maintenance frequency, a number of physically-based and statistically-based water main failure prediction models have been developed in the last 30 years. Precious review papers focused more on the evolution of failure models rather than modeling results. However, the modeling results of different models applied in case studies are worth reviewing as well.

In this review, we focus on research papers after Year 2008 and collect latest cases without repetition. …

Development Of A Framework And Analysis System To Support Intervention In Newborn Healthcare, Holly E. Lane

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

One of the most vulnerable populations in healthcare is the newborn infant. As hospitalization for childbirth is the largest cause for entry into a healthcare facility, the population of newborns each year is extensive as is their cost of care. Newborn infants also may have additional costs associated with readmission for common or preventable illnesses, which may occur due to insufficient infant screening or lack of caregiver knowledge. Much research has been done to attempt to determine causes of readmission, what contributes to an increased or decreased readmission rate among newborns, and how healthcare interventions can impact these rates and …

Some New Results For Equilibria Of N-Person Games, Ahmad Nahhas

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

In this dissertation, we present four journal articles in the area of game theory. In the first article, we define a generalized equilibrium for n-person normal form games. We prove that the Nash equilibrium and the mixed Berge equilibrium are special cases of the generalized equilibrium. In the second article, we study the computational complexity of finding a mixed Berge equilibrium in n-person normal form games. In particular, we prove that the problem is an NP-complete problem for n >= 3. In the third article, we give an interpretation of mixed strategies via resource allocation. Finally, in the fourth article, …

Data Protection In Nigeria: Addressing The Multifarious Challenges Of A Deficient Legal System, Roland Akindele

Journal of International Technology and Information Management

This paper provides an overview of the current state of privacy and data protection policies and regulations in Nigeria. The paper contends that the extant legal regime in Nigeria is patently inadequate to effectively protect individuals against abuse resulting from the processing of their personal data. The view is based on the critical analysis of the current legal regime in Nigeria vis-à-vis the review of some vital data privacy issues. The paper makes some recommendations for the reform of the law.

Airport Security Investment Model, Joshua Daniel Bolton

Graduate Theses and Dissertations

In an increasingly mobile and diverse world, it is difficult to quantify the risk, or danger, associated with traveling. Airports have suffered greatly for being unable to define potential risks and protect against them. Intelligent adversary risk is a complicated high-level issue for many airports. Airports are targeted because of the large amount of people in a confined space and the social, economic, and psychological impact of terrorist attacks on the American people. In the months following September 11th, 2001, the airline industry in the United States lost $1.1 billion in revenue. The American people stayed grounded, for fear of …

Analyzing The Fundamental Aspects And Developing A Forecasting Model To Enhance The Student Admission And Enrollment System Of Msom Program, Sultanul Nahian Hasnat

Graduate Theses and Dissertations

A forecasting model, associated with predictive analysis, is an elementary requirement for academic leaders to plan course requirements. The M.S. in Operations Management (MSOM) program at the University of Arkansas desires to understand future student enrollment more accurately. The available literature shows that there is an absence of forecasting models based on quantitative, qualitative and predictive analysis. This study develops a combined forecasting model focusing on three admission stages. The research uses simple regression, Delphi analysis, Analysis of Variance (ANOVA), and classification tree system to develop the models. It predicts that 272, 173, and 136 new students will apply, matriculate …

Artificial Olfactory System For Multi-Component Analysis Of Gas Mixtures., Alexander Aleksandrovich Larin

Electronic Theses and Dissertations

Gas analysis is an important part of our world and gas sensing technology is becoming more essential for various aspects of our life. A novel approach for gas mixture analysis by using portable gas chromatography in combination with an array of highly integrated and selective metal oxide (MOX) sensors has been studied. We developed a system with small size (7 x 13 x 16 inches), low power consumption (~10 W) and absence of special carrier gases designed for portable field analysis (assuming apriori calibration). Low ppb and even sub-ppb level of detection for some VOCs was achieved during the analysis …

Strain Path Effect On Austenite Transformation And Ductility In Q&P 1180 Steel, Jeffrey Grant Cramer

Theses and Dissertations

The ductility of Q&P 1180 steel was studied with regard to retained austenite transformation under different strain paths. Specimens were tested in uniaxial tension in a standard test frame as well as in situ in the scanning electron microscope (SEM). Then digital image correlation (DIC) was used to compute the effective strain at the level of the individual phases in the microstructure. Stretching experiments were also performed using limiting dome height (LDH) tooling, where specimens were strained in both biaxial and plane strain tension. The experiments were done incrementally, for each strain path, and the retained austenite at each level …