Research On Simulation Method Of Unconformity Surface In Rock Mass Based On Pfc3d,
2020
1. College of Safety Science and Engineering, Liaoning Technical University, Fuxin 123000, China; ;2. Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education, Fuxin 123000, China; ;3. Tunnel & Underground Structure Engineering Center of Liaoning, Dalian Jiaotong University, Dalian 116028, China; ;
Research On Simulation Method Of Unconformity Surface In Rock Mass Based On Pfc3d, Teijun Cui, Yundong Ma, Laigui Wang
Journal of System Simulation
Abstract: In order to accurately simulate the rock mass, considering the effects of the unconformity to simulation, the method was purposed to simulate the different contact situation using PFC3D based on the Particle flow theory, include: integration, parallel unconformity, angular unconformity. Simulation step include: define the rock coordinate system; determine the key points of contact trend; use MATLAB to fit the trend curve and get the parameters; use PFM to construct the model; shaping contact surface using FISH according the parameters. The structured model satisfies the above requirements, which proved the model is close to the actual rock mass mechanics …
Insulation Optimization Of High Voltage Box Based On Finite Element Method,
2020
1. Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense (North China Electric Power University), Baoding 071003, China; ;
Insulation Optimization Of High Voltage Box Based On Finite Element Method, Fangcheng Lü, Jianqiao Ma, Hongyu Liu, Fochi Wang, Xie Jun, Buchao Jia, Yunxiang Guo, Li Min
Journal of System Simulation
Abstract: The discharge between cable connector and box walls directly affects the operational reliability of CRH. Optimized design of the electric field distribution of the connector can improve stability of CRH. The sheath installation position, sheath structure and thickness of the insulation layer were analyzed to see its influence on the distribution of field intensity. The simulation results show that insulating jacket positioned at the high voltage end of cable connector can effectively improve the electric field distribution, insulation sheath should appress to the high voltage fitting end of the cable connector and also extend to the root of first …
Application Of Fuzzy Pid Control Based On Neutral Network On High/Low Temperature Environmental Simulation System,
2020
1. State Key Laboratory of Virtual Reality Technology and Systems, Beihang University, Beijing 100191, China; ;2. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China; ;3. Science and Technology on Aircraft Control Laboratory, Beijing 100191, China; ;
Application Of Fuzzy Pid Control Based On Neutral Network On High/Low Temperature Environmental Simulation System, Jingwang Jiang, Yunjie Wu, Mengchen Wu
Journal of System Simulation
Abstract: High/Low Temperature Environmental Simulation System is mainly used for the functional deploying test of the giant space deployable antenna and some large-scale structures at extreme high/low temperatures, and some other relevant tests. This project requests controlling the parameters of the system in a large range with high accuracy and no overshoot. Temperature control system has features of non-linearity, time-variant, and large delay, which seriously affect the speed and accuracy of the control. However, the conventional PID finds it difficult to achieve desired effect of control. A new scheme of compound control which is referred to as fuzzy-PID control based …
Collaborative Simulation Between Remote Laboratories Based On Fiber-Optic Reflective Memory,
2020
1. Tianjin Delegate Station of Navy Armaments Department, Beijing 100073, China; ;
Collaborative Simulation Between Remote Laboratories Based On Fiber-Optic Reflective Memory, Chijun Tian, Shengbing Shen, Yanlei Li, Xianzong Wang, Zhuofeng Guo
Journal of System Simulation
Abstract: Taking advantage of independently developed HY-FB2125G Fiber-Optic Reflective Memory network interface and HY-FHX8 fiber-optic hub, the fiber-Optic Reflective Memory network was built and high speed data contribution was realized. With the elaborate design of hub-centered network architecture, simulation laboratories have the ability to process collaborative experiment and reuse test resources, which provides powerful support to accomplish collaborative simulation experiments.
Application Of Flowsim For Traffic Management And Assessment In Shenzhen,
2020
Department of civil engineering, Tsinghua University, Beijing 100084, China;
Application Of Flowsim For Traffic Management And Assessment In Shenzhen, Yuhan Jia, Jianping Wu, Yiman Du, Geqi Qi
Journal of System Simulation
Abstract: Recently many traffic problems are faced by more and more cities. Since traditional method can no longer solve the above problems, and Transportation Demand Management (TDM) solutions are in desperate need. Also, as a successful application of Intelligent Traffic System (ITS), traffic simulation software has become an efficient way to carry out assessment for TDM. The implementation of congestion charge policy in Shenzhen was studied as a demonstration of TDM in China. Then the microscopic traffic simulation software, FLOWSIM, was introduced to simulate the traffic situation to do assessment of congestion charge. Based on the results, advices …
Knowledge Engineering In Simulation Of Parallel Military System,
2020
College of Information System and Management, National University of Defense Technology, Changsha 410073, China;
Knowledge Engineering In Simulation Of Parallel Military System, Xiaogang Qiu, Zhang Peng
Journal of System Simulation
Abstract: Military model is the integration and representation of military knowledge. The main task of military simulation is either to verify the exist knowledge or to produce new knowledge about military activities. By computational experiment, it is able to gain new knowledge about the parallel military system, which is able to enrich the origin knowledge system. Combined with parallel system technology, it's possible to study the evolution process of military knowledge, which is able to help us understand the complexity of military system. From the perspective of knowledge engineering, the processes of knowledge integration, representation and evolution were studied, and …
Research On Dynamic Characteristics Of Hypersonic Vehicle Based On Large Scale Parallel Simulation,
2020
Institute of Systems Engineering, CAEP, Mianyang, Sichuan 621999, China;
Research On Dynamic Characteristics Of Hypersonic Vehicle Based On Large Scale Parallel Simulation, Hongyong Chen, Xuanhua Fan, Keying Wang, Fang Ye, Shifu Xiao
Journal of System Simulation
Abstract: Based on the three predominant algorithms (Implicitly Restarted Krylov-Schur Method and Jacobi-Davidson Method ) and The PANDA Framework, a large-scale parallel computing system for modal analysis was established. The finite element model of typical wave-rider hypersonic vehicle was established and its dynamic characteristics were investigated. The numerical analysis reaches scale of 14,000,000 Degree of Freedoms (DOFs), and the number of MPI Cores is 1024. What's more, the difference of first 100 orders natural frequencies between PANDA and well known commercial software ANSYS is less than 0.01%, and mode shapes are absolutely the same, the efficiency of 1024 cores is …
Design Of Unified Algorithm For Sampling Mpdu,
2020
Beijing Aerospace Control Center, Beijing 100094, China;
Design Of Unified Algorithm For Sampling Mpdu, Ti Zhou, Miao Yi, Yang Jian
Journal of System Simulation
Abstract: The standard of CCSDS AOS is used in space exploration because of the process of the standard airspace system. The spacecraft missions have used multi-protocol data unit (MPDU) to multiplex the package channels. The range of MPDU and the data are different in different spacecrafts. This process brings some problems in the maintenance and the correctness of the algorithms of virtual channel multiplexing in simulation system. The applications of CCSDS in the world were researched, and the general definitions of MPDU in these missions were described. A circle memory was given to buffer the data of MPDU, two general …
Wiftcpn Formalized Decision-Making For Auv Formation System Under Uncertainty,
2020
1. Marine College, Northwestern Polytechnical University, Xi'an 710072, China; ;2. National Key Laboratory of Underwater Information Process and Control, Xi'an, 710072, China;
Wiftcpn Formalized Decision-Making For Auv Formation System Under Uncertainty, Lili Hao, Gu Hao, Fengju Kang, Huizhen Yang
Journal of System Simulation
Abstract: Usually the acquired target information is not sufficient and certain enough due to inaccurate measurements, inconsistent granularity and noise, which results in the AUV formation decision-making system having some characteristics, such as discrete, time delay, hierarchical, fuzzy, inconsistencies. Therefore, an integrated formal approach of modeling, simulation and verification based on weighted intuitionistic fuzzy timed colored petri net (WIFTCPN) was proposed. The mapping relationship between WIFTCPN and fuzzy time, time delay and intuition fuzzy inference rules were established. Furthermore, corresponding reasoning decision simulation model under uncertain information was built by using CPN Tools. The properties including liveness, home and fairness …
Human Action Recognition Based On Self-Learning Feature And Hmm,
2020
Shanghai University, School of Mechatronic Engineering and Automation,Shanghai Key Laboratory of Power Station Automation, Shanghai 200072, China;
Human Action Recognition Based On Self-Learning Feature And Hmm, Jiarui Wen, Lina Liu, Rui Ling, Shiwei Ma
Journal of System Simulation
Abstract: The current methods of human action recognition by computer vision are mostly based on hand-craft features and usually prior knowledge-required. They inevitably depend on specific applications and neglect the inner structure of visional information. A novel method which integrated self-learned pose features and combined posture symbol rules was proposed to achieve the recognition of human action more efficiently. The structural features of posture silhouette were extracted and a codebook of primary posture was built through the establishment of a sparse auto-encoder network. Then, in the phase of recognition, the Hidden Markov Model was employed to train the models …
Group-Based Image Compositing In Heterogeneous Environments,
2020
1. Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190, China; ;2. University of Chinese Academy of Sciences, Beijing 100049, China;
Group-Based Image Compositing In Heterogeneous Environments, Liu Ning, Dengming Zhu, Zhaoqi Wang, Wei Yi
Journal of System Simulation
Abstract: Image compositing requires dense inter-node communications and could easily become the bottleneck of a parallel visualization system. Conventional image compositing algorithms assume the environment is homogeneous and take no heterogeneity into consideration. In a heterogeneous environment, this assumption is likely to cause unreasonable load distribution among the nodes. To address this problem, we present a group-based image compositing algorithm in heterogeneous environments. It is able to distribute the workloads among the nodes according to computing and networking characteristics of the heterogeneous environments. We conduct a comprehensive evaluation on the ns-3 network simulator. Experiment results shows that when the environment …
Intelligent Combination Of Discrete Lod Model For 3d Visualization Based On Visual Perception And Information Entropy Fusion,
2020
1. Marine College, Northwestern Polytechnical University, Xi'an, 710072, China; ;2. National Key Laboratory of Underwater Information Process and Control, Xi'an, 710072, China;
Intelligent Combination Of Discrete Lod Model For 3d Visualization Based On Visual Perception And Information Entropy Fusion, Che Li, Fengju Kang
Journal of System Simulation
Abstract: With respect to the problem that single-index evaluation of visual quality in the process of intelligent combination of discrete Level-of-Detail (LoD) model for three-dimensional (3D) visualization can easily result in low reliability. Human visual perception and information entropy based multi-index fusion intelligent combination of discrete LoD model algorithm was proposed. Through analyzing the visual perception based image quality evaluation index, multi-index fusion evaluation intelligent combination of discrete LoD model framework was built. Comparative experiment with single index model combination bases on PSO method was designed. Model combination optimizing process utilized modified Particle Swarm Optimization (PSO) method which was strengthened …
3d Flight Simulation System Visualization And Study Of Google Earth,
2020
The Unit 95934 of PLA, Cangzhou 061736, China;
3d Flight Simulation System Visualization And Study Of Google Earth, Junyu Wang, Bin Cheng, Chuan Wang, Ren Jian
Journal of System Simulation
Abstract: Through the secondary development of Google Earth, flight training simulation system for visualization of realization, the system used B/S structure, the client browser using Google Earth, all the development on the server side. Mathematical model of aircraft was constructed; 3D modeling software SketchUp was used to establish a realistic fighter jets, missiles, high and low speed flame and other 3D model; the established 3D models was imported into Google Earth; by Microsoft VC ++ 6.0, the secondary development on Digital Earth was achieved, and the control of aircraft and other 3D models was realized; Matlab was used to verify …
Track Planning For Unmanned Aerial Vehicles Based On Wolf Pack Algorithm,
2020
1. Air Force Engineering University, Xi'an 710051, China; ;
Track Planning For Unmanned Aerial Vehicles Based On Wolf Pack Algorithm, Yonglan Liu, Weimin Li, Husheng Wu, Wenjing Song
Journal of System Simulation
Abstract: Along with the diversification of missions that unmanned aerial vehicles (UAV) can carry out, track planning becomes basic precondition of UAV fulfilling missions successfully. Aiming to these, a method of track planning based on Wolf Pack Algorithm (WPA) was proposed. The method of equivalent terrain simulation was used to make enemy's threatens and terrain obstacles equal to peaks, thus the scene of track planning of UAV was built. Based on the scene, the WPA that extracted three intelligent behaviors including scouting, summoning and beleaguering was adopted to plan the track of UAV, whose start point and end point had …
Research On Online Interaction Simulation Method Of Uav Flight Control System,
2020
Beijing Electromechanical Engineering Institute,Beijing 100074;
Research On Online Interaction Simulation Method Of Uav Flight Control System, Zhang Qing, Ran Jian, Yujun Hou
Journal of System Simulation
Abstract: UAV is widely applied to a variety of areas, for the huge advantages of remote controlling flight trajectory, iterant recovery and flexible mission payloads flight. The routine design methods for aerocraft control system cannot supply desire of UAV high accuracy flying and replying diversified compositive disturb. System composition and departmental function of UAV flight control system were introduced. An online interaction simulation method of UAV flight control system was advanced. The principle and principle of online interaction simulation were analyzed. The key techniques of constituting fiducial simulation model, real time updating and revising simulation model, on-line detecting a mass …
Study On Optimization Of Loading Plan In Car Carrier Of Vehicle Logistics Transportation,
2020
Research Institute of Chemical Defence,Beijing 102205,China;
Study On Optimization Of Loading Plan In Car Carrier Of Vehicle Logistics Transportation, Qin Liang, Zhicheng Wang, Meng Lei, Deru Deng, Zhiyun Zou, Xijie Gai, Yuqing Guo, Wenqiang Feng
Journal of System Simulation
Abstract: The car carrier load transportation allocation problem is a typical problem in vehicle logistics. In order to improve the efficiency of transport and reduce the cost, this problem was studied by adopted hypothetical data and requirements. All the load combinations whose utilization factor of the length of sweeping board is more than 95% established a matrix. Then the dynamic programming obtained the number of car carrier to the corresponding loading plan. By using the exhaustion method, through computer simulation, loading plan of each layer of car carrier was randomly produced, strictly meeting the loading requirements of each car at …
Simulation And Application Of Dkipso-Svc Combined Model For Credit Risk Assessment,
2020
College of Computer Science, Inner Mongolia University, Hohhot 010021, China;
Simulation And Application Of Dkipso-Svc Combined Model For Credit Risk Assessment, Zhenhai Wan, Tieying Liu, Zhang Yang, Jishuang Li
Journal of System Simulation
Abstract: In order to improve the problem of inefficient parameter selection of the GDS-SVC model and DIPSO-SVC model, and utilize the generalization ability and robustness of support vector classification (SVC), the reduction factor of location updating was introduced based on the dynamic improvement Particle Swarm Optimization (DIPSO), and then the DKIPSO-SVC of parameters selecting in SVC was established based on DKIPSO. The method was applied to credit scoring of commercial banks. The simulation results demonstrate that the robustness of the DKIPSO-SVC model is better than DIPSO-SVC. But beyond that, the accuracy of DKIPSO-SVC model achieves 96.6049%, higher than that of …
Application Of Ansys To Reliability Analysis Of Prefabricated Steel Bridge,
2020
PLA 63956 Troops, Beijing 100036, China;
Application Of Ansys To Reliability Analysis Of Prefabricated Steel Bridge, Yinlong Zhang, Li Bo, Shichuan Bian
Journal of System Simulation
Abstract: Prefabricated steel bridge is a temporary or semi-permanent bridge structure. When the vehicles pass through the bridge, large internal force and deformation of the bridge structure will occur, and higher requirements of the bridge structure reliability are put forward. Probabilistic analysis design is an analysis technique for assessing the effect of uncertain random input parameters and assumptions on a finite element calculation model. Making use of the Probabilistic Design System, which is offered by the large universal finite element analysis program ANSYS, the reliability analysis of deflection, bend stress and compression member stability of a main truss structure of …
Fujio Cho Legacy Lecture Notes,
2020
Toyota Motor Corporation, Japan
Fujio Cho Legacy Lecture Notes, Fujio Cho, Kozo Saito
Institute of Research for Technology Development Textbook Gallery
The Fujio Cho legacy lecture was created in 2013 as part of UK Institute of Research for Technology Development (IR4TD)’s True Lean Systems program to assist industrial clients to transform their organizations to a True Lean organization by effectively using principles and tools of Toyota Production System (TPS). During the years 1987-1994, Cho and Saito worked together to layout the foundation of the now well-established Toyota-University of Kentucky relationship on R&D, True Lean Systems, and production engineering, housed in IR4TD, the Toyota endowed Institute established in 2007 with the support from the Commonwealth of Kentucky under the research competitiveness trust …
New 2d Flow Visualization Method Based On Mutual Information And Image Fusion,
2020
1. Lishui University, Lishui 323000, China; ;
New 2d Flow Visualization Method Based On Mutual Information And Image Fusion, Weihua Shen, Shengbo Wang, Zhigeng Pan
Journal of System Simulation
Abstract: A overview of flow visualization method based on information theory was made. After a comparative analysis of several classic two-dimensional flow visualization techniques, the concept of mutual information from information theory and image fusion technique was used to deal with the existing classical two-dimensional flow visualization techniques. A new two-dimensional flow visualization technique was obtained. The visualization results of the new method is very well.
