Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Novel Approach For Defect Detection Of Wind Turbine Blade Using Virtual Reality And Deep Learning, Md Fazle Rabbi

Open Access Theses & Dissertations

Wind turbines are subjected to continuous rotational stresses and unusual external forces such as storms, lightning, strikes by flying objects, etc., which may cause defects in turbine blades. Hence, it requires a periodical inspection to ensure proper functionality and avoid catastrophic failure. The task of inspection is challenging due to the remote location and inconvenient reachability by human inspection. Researchers used images with cropped defects from the wind turbine in the literature. They neglected possible background biases, which may hinder real-time and autonomous defect detection using aerial vehicles such as drones or others. To overcome such challenges, in this paper, …

Experimental And Numerical Studies Of Laser Powder-Bed Fusion Process With Ti-6al-4v Powder: (1) Porosity And Mechanical Properties, And (2) Transient Phenomena In One- And Two-Dimensional Fabrications., Santosh K. Rauniyar

Electronic Theses and Dissertations

Laser powder bed fusion (L-PBF) process represents a form of metal additive manufacturing (AM) where micron-level powdered material is selectively melted and fused layer by layer to create intricate three-dimensional parts. This process involves rapid melting and solidification, leading to intense thermocapillary convection within the molten pool. The melt pool is a crucial element of the L-PBF process and refers to the localized region where the powder particles are melted and solidified to form each layer of the printed part. The shape and dimensions of the melt pool directly influence the accuracy and surface finish of the printed part. Precise …

Characterizing Logistics Operations Within A Federal Staging Area For Hurricane Response: A Qualitative Analysis Of Federal, State And Local Perspectives, Jannatul Shefa

Graduate Theses and Dissertations

A successful deployment of logistics operations following a disaster is a collective contribution of federal, state, and local entities to ascertain an efficient and effective response. This research analyzes data from interviews with disaster response logistics experts from these entities. The objective is to investigate the information sources and planning processes used in these organizations to plan vehicle routes for critical resource deliveries to impacted areas. Special attention is directed to the impacts of incomplete knowledge of infrastructure status, such as road disruptions due to debris or flooding. Supported by both qualitative and quantitative evidence, the study finds that incomplete …

Machine Learning-Based Seismic Damage Assessment Of Residential Buildings Considering Multiple Earthquake And Structure Uncertainties, Xinzhe Yuan, Liujun Li, Haibin Zhang, Yanping Zhu, Genda Chen, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Wood-frame structures are used in almost 90% of residential buildings in the United States. It is thus imperative to rapidly and accurately assess the damage of wood-frame structures in the wake of an earthquake event. This study aims to develop a machine-learning-based seismic classifier for a portfolio of 6,113 wood-frame structures near the New Madrid Seismic Zone (NMSZ) in which synthesized ground motions are adopted to characterize potential earthquakes. This seismic classifier, based on a multilayer perceptron (MLP), is compared with existing fragility curves developed for the same wood-frame buildings near the NMSZ. This comparative study indicates that the MLP …

Visibility Based Hospital Inpatient Unit Design., Uttam Karki

Electronic Theses and Dissertations

Patient fall is one of the adverse events in an inpatient unit of a hospital that can lead to disability and/or mortality. Healthcare literature suggests that increased visibility of patients by unit nurses is essential to improve patient monitoring and, in turn, reduce falls. However, such research has been descriptive in nature and does not provide an understanding of the characteristics of an optimal inpatient unit layout from a visibility-standpoint. This dissertation fills significant voids in this domain and adds much-needed realism to develop insights that hospital decision-makers can use to design their inpatient unit layout. Our first contribution (Chapter …

Generalization Through Diversity: Improving Unsupervised Environment Design, Wenjun Li, Pradeep Varakantham, Dexun Li

Research Collection School Of Computing and Information Systems

Agent decision making using Reinforcement Learning (RL) heavily relies on either a model or simulator of the environment (e.g., moving in an 8x8 maze with three rooms, playing Chess on an 8x8 board). Due to this dependence, small changes in the environment (e.g., positions of obstacles in the maze, size of the board) can severely affect the effectiveness of the policy learned by the agent. To that end, existing work has proposed training RL agents on an adaptive curriculum of environments (generated automatically) to improve performance on out-of-distribution (OOD) test scenarios. Specifically, existing research has employed the potential for the …

Modeling And Solution Methodologies For Mixed-Model Sequencing In Automobile Industry, Ibrahim Ozan Yilmazlar

All Dissertations

The global competitive environment leads companies to consider how to produce high-quality products at a lower cost. Mixed-model assembly lines are often designed such that average station work satisfies the time allocated to each station, but some models with work-intensive options require more than the allocated time. Sequencing varying models in a mixed-model assembly line, mixed-model sequencing (MMS), is a short-term decision problem that has the objective of preventing line stoppage resulting from a station work overload. Accordingly, a good allocation of models is necessary to avoid work overload. The car sequencing problem (CSP) is a specific version of the …

Essays On Integer Programming Approaches To Analyze Equilibrium Solutions In Games, Lucky Cho

All Dissertations

In this dissertation, we present three applications of integer programming to analyze non-cooperative games. In a non-cooperative game, players of the game act selfishly and choose the best response given every other player's decision. The game reaches a Nash equilibrium when no player can benefit by changing its decisions. Our goal is to create an integer program that can identify these Nash equilibriums by modeling the best response of the game's players in the constraints. We prove a one-to-one correspondence between the game's Nash equilibrium and the feasible solution of a corresponding integer program. The one-to-one correspondence allows us to …

Learning To Send Reinforcements: Coordinating Multi-Agent Dynamic Police Patrol Dispatching And Rescheduling Via Reinforcement Learning, Waldy Joe, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We address the problem of coordinating multiple agents in a dynamic police patrol scheduling via a Reinforcement Learning (RL) approach. Our approach utilizes Multi-Agent Value Function Approximation (MAVFA) with a rescheduling heuristic to learn dispatching and rescheduling policies jointly. Often, police operations are divided into multiple sectors for more effective and efficient operations. In a dynamic setting, incidents occur throughout the day across different sectors, disrupting initially-planned patrol schedules. To maximize policing effectiveness, police agents from different sectors cooperate by sending reinforcements to support one another in their incident response and even routine patrol. This poses an interesting research challenge …

The Heterogeneous Vehicle Routing Problem With Multiple Time Windows For The E-Waste Collection Problem, Aldy Gunawan, Minh P.K Nguyen, Vincent F. Yu, Dang Viet Anh Nguyen

Research Collection School Of Computing and Information Systems

Waste from electrical and electronic equipment (WEEE) or e-waste describes end-of-life electronic products that are discarded. Due to their toxic and negative impacts to humans' health, many publications have been proposed to handle, however, studies related to e-waste collection and transportation to waste disposal sites are not widely studied so far. This study proposes a mixed integer linear programming (MILP) model to solve the e-waste collecting problem by formulating it as the heterogeneous vehicle routing problem with multiple time windows (HVRPMTW). The model is validated with newly developed benchmark instances that are solved by commercial software, CPLEX. The model is …

Grasp Based Metaheuristic To Solve The Mixed Fleet E-Waste Collection Route Planning Problem, Aldy Gunawan, Dang V.A. Nguyen, Pham K.M. Nguyen, Pieter. Vansteenwegen

Research Collection School Of Computing and Information Systems

The digital economy has brought significant advancements in electronic devices, increasing convenience and comfort in people’s lives. However, this progress has also led to a shorter life cycle for these devices due to rapid advancements in hardware and software technology. As a result, e-waste collection and recycling have become vital for protecting the environment and people’s health. From the operations research perspective, the e-waste collection problem can be modeled as the Heterogeneous Vehicle Routing Problem with Multiple Time Windows (HVRP-MTW). This study proposes a metaheuristic based on the Greedy Randomized Adaptive Search Procedure complemented by Path Relinking (GRASP-PR) to solve …

Lean Manufacturing Approach To Increase Packaging Efficiency, Lina Gozali, Irsandy Kurniawan, Aldo Salim, Iveline Anne Marie, Benny Tjahjono, Yun Chia Liang, Aldy Gunawan, Nnovia Hardjo Sie, Yuliani Suseno

Research Collection School Of Computing and Information Systems

The company upon which this paper is based engages in flexible packaging production, especially pharmaceutical products with guaranteed quality, trusted by consumers. Its production process includes printing, laminating, and assembling processes. Production activities are done manually and automatically using machines, so various types of waste are often found in these processes, making the level of plant efficiency nonoptimal. This study aims to identify wastes occurring in the production process, especially the production of pollycelonium with three colour variants as the highest demand product, by applying lean manufacturing concepts. The Current Value Stream Mapping (CVSM) used to map the production process …

Structural Behavior Of Reactive Powder Concrete Under Harmonic Loading, Shatha D. Mohammed, Teghreed H. Ibrahim, Ban F. Salman, Abbas A. Allawi

Faculty Publications

Industrial buildings usually are designed to sustain several types of load systems, such as dead, live, and dynamic loads (especially the harmonic load produced by rotary motors). In general, these buildings require high-strength structural elements to carry the applied loads. Moreover, Reactive Powder Concrete (RPC) has been used for this purpose because of its excellent mechanical strength and endurance. Therefore, this study provides an experimental analysis of the structural behaviors of reinforced RPC beams under harmonic loads. The experimental program consisted of testing six simply supported RPC beams with lengths of 1500 mm, widths of 150 mm, and thicknesses of …

A Hybrid Metaheuristic And Computer Vision Approach To Closed-Loop Calibration Of Fused Deposition Modeling 3d Printers, Graig S. Ganitano, Shay V. Wallace, Benji Maruyama, Gilbert L. Peterson

Faculty Publications

Fused deposition modeling (FDM) is one of the most popular additive manufacturing (AM) technologies for reasons including its low cost and versatility. However, like many AM technologies, the FDM process is sensitive to changes in the feedstock material. Utilizing a new feedstock requires a time-consuming trial-and-error process to identify optimal settings for a large number of process parameters. The experience required to efficiently calibrate a printer to a new feedstock acts as a barrier to entry. To enable greater accessibility to non-expert users, this paper presents the first system for autonomous calibration of low-cost FDM 3D printers that demonstrates optimizing …

An Enhanced Adaptive Learning System Based On Microservice Architecture, Abdelsalam Helmy Ibrahim, Mohamed Eliemy, Aliaa Abdelhalim Youssif

Future Computing and Informatics Journal

This study aims to enhance Adaptive Learning Systems (ALS) in Petroleum Sector in Egypt by using the Microservice Architecture and measure the impact of enhancing ALS by participating ALS users through a statistical study and questionnaire directed to them if they accept to apply the Cloud Computing Service “Microservices” to enhance the ALS performance, quality and cost value or not. The study also aims to confirm that there is a statistically significant relationship between ALS and Cloud Computing Service “Microservices” and prove the impact of enhancing the ALS by using Microservices in the cloud in Adaptive Learning in the Egyptian …

Visual Question Answering: A Survey, Gehad Assem El-Naggar

Future Computing and Informatics Journal

Visual Question Answering (VQA) has been an emerging field in computer vision and natural language processing that aims to enable machines to understand the content of images and answer natural language questions about them. Recently, there has been increasing interest in integrating Semantic Web technologies into VQA systems to enhance their performance and scalability. In this context, knowledge graphs, which represent structured knowledge in the form of entities and their relationships, have shown great potential in providing rich semantic information for VQA. This paper provides an abstract overview of the state-of-the-art research on VQA using Semantic Web technologies, including knowledge …

Estudio Termoquímico Asistido Por Computadora De Los Polifenoles Presentes En La Fresa [Thermochemical Computer Assisted Study Of Polyphenols Presented In Strawberry], Federico Lopez, Jeimmy Rocio Bonilla Méndez, Luis Ricárdez Sandoval, Hiram Moya, Daniela Mainardi, Arturo González Quiroga, Jeffrey Leon-Pulido

Manufacturing & Industrial Engineering Faculty Publications

Las fresas son un alimento importante en Latinoamérica debido a sus componentes químicos, puesto que son una considerable fuente de calorías y polifenoles. Estos elementos son útiles por su capacidad antioxidante y otras propiedades beneficiosas para la salud. Sin embargo, la presión y la temperatura pueden llegar a afectar la integridad molecular de estos componentes, por lo tanto, en el proceso de producción de diferentes productos basados en fresas, se requiere estudiar las propiedades termoquímicas de los diferentes polifenoles presentes en esta fruta. Para ello, se extrajeron datos de las principales familias de polifenoles, antocianinas, flavanoles, flavonoles, ácidos hidroxibenzoicos y …

The Characteristics Of Successful Military It Projects: A Cross-Country Empirical Study, Helene Berg, Jonathan D. Ritschel

Faculty Publications

In the armed forces, successful digitalization is crucial to ensure effective operations. Much of the existing literature on project factors during the planning and execution phases of public IT projects do not focus specifically on military sector projects. Therefore, the paper aims to provide empirical insights into the characteristics of successful military IT projects. Data from such projects in NATO countries and agencies were collected through interviews and project documents. The findings relating to the main variable of interest, “delivery of client benefit,” supported previous findings on IT project performance. Medium-sized projects performed better than small and large projects, and …

An Effective Heuristic To Reduce Total Flowtime For Randomly-Structured Flowshop Problems, Arun John Abraham

Theses

We propose a heuristic to reduce total flowtime in a six-job, four-machine permutation flowshop scheduling problem. This work contributes to the prolific research efforts reported in the permutation flowshop scheduling problem (PFSP).

The heuristic was applied to 102 randomly structured flowshop scheduling problems, with job processing times generated using an integer uniform distribution in the interval [1,100]. The results of computational experiments were deemed satisfactory after being evaluated by using the ordinal and percentile ranks of the resulting total flowtime for the six jobs.

Inventory-Responsive Donor-Management Policy: A Tandem Queueing Network Model, Taozeng Zhu, Nicholas Teck Boon Yeo, Sarah Yini Gao, Gar Goei Loke

Research Collection Lee Kong Chian School Of Business

Problem definition: In the blood-donor-management problem, the blood bank incentivizes donors to donate, given blood inventory levels. We propose a model to optimize such incentivization schemes under the context of random demand, blood perishability, observation period between donations, and variability in donor arrivals and dropouts. Methodology/results: We propose an optimization model that simultaneously accounts for the dynamics in the blood inventory and the donor’s donation process, as a coupled queueing network. We adopt the Pipeline Queue paradigm, which leads us to a tractable convex reformulation. The coupled setting requires new methodologies to be developed upon the existing Pipeline Queue framework. …