Industrial Engineering Commons^™

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

The Optimal Warehouse Location For Cal Poly's Campus Dining, Robert Buie

Industrial and Manufacturing Engineering

The Cal Poly Corporation and Campus Dining face the challenge of meeting the growth of students and dining venues on campus with the limited space capacity of their warehouse in building 19. Given a $250,000 budget, Campus Dining has an option to keep the warehouse at the current location at building 19 or moving the warehouse to building 82 off Mt. Bishop Road. Each warehouse location has its benefits as building 19 is in the center of campus and building 82 has much more shelving space than building 19. The objective of this project was to select the better choice …

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

Task Analysis, Modeling, And Automatic Identification Of Elemental Tasks In Robot-Assisted Laparoscopic Surgery, Lavie Pinchas Golenberg

Wayne State University Dissertations

Robotic microsurgery provides many advantages for surgical operations, including tremor filtration, an increase in dexterity, and smaller incisions. There is a growing need for a task analyses on robotic laparoscopic operations to understand better the tasks involved in robotic microsurgery cases. A few research groups have conducted task observations to help systems automatically identify surgeon skill based on task execution. Their gesture analyses, however, lacked depth and their class libraries were composed of ambiguous groupings of gestures that did not share contextual similarities.

A Hierarchical Task Analysis was performed on a four-throw suturing task using a robotic microsurgical platform. Three …

Causal Product Knowledge Management, Yun Seon Kim

Wayne State University Dissertations

The US engineering industry base is facing a significant loss of knowledge due to large numbers of employees retiring in the next decade. Problems in various product developments including product design may arise when the expertise is no longer available or the knowledge is forgotten. Also, most of product design knowledge is not reusable, because product design knowledge in an organization remains un-codified. Generally, knowledge-based system can solve or infer these problems. However, knowledge-based systems have been developed solely through the use of rule-based approach, which allows for easy modeling of expert reasoning, but such an approach is not general …

An Interval Based Approach To Model Input Uncertainty In Discrete-Event Simulation, Ola Batarseh

Electronic Theses and Dissertations

The objective of this research is to increase the robustness of discrete-event simulation (DES) when input uncertainties associated models and parameters are present. Input uncertainties in simulation have different sources, including lack of data, conflicting information and beliefs, lack of introspection, measurement errors, and lack of information about dependency. A reliable solution is obtained from a simulation mechanism that accounts for these uncertainty components in simulation. An interval-based simulation (IBS) mechanism based on imprecise probabilities is proposed, where the statistical distribution parameters in simulation are intervals instead of precise real numbers. This approach incorporates variability and uncertainty in systems. In …

Accidents Will Happen. Do Safety Systems Improve Warehouse Safety Performance?, Rene B. M. De Koster, B. M. Balk, I Davelaar, M. Martens

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Safety is becoming more and more an issue in warehouses. In the literature, effective measures leading to increased occupational health and safety have hardly been researched. Most research focuses on the impact of perceived safety-related leadership of managers and worker safety consciousness on ‘safety climate’ and workers’ safe behavior. We have carried out exploratory research into which measures really improve the safety performance of a warehouse. We particularly focus on the effects of (1) safety-related work procedures, (2) safety leadership, and (3) workers’ safety consciousness. Based on a survey we show that safety leadership and safety-related work procedures significantly drive …

Optimizing The Rearrangement Process In A Dedicated Warehouse, Hector J. Carlo, German E. Giraldo

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Determining the optimal storage assignment for products in a dedicated warehouse has been addressed extensively in the Facility Logistics literature. However, the process of implementing a particular storage assignment given the current location of products has not received much attention in the existing literature. Typically, warehouses use downtime or overtime to remove products from their current location and move them to the suggested location. This work presents the Rearrange-While-Working (RWW) policy to optimize the process of rearranging a dedicated warehouse. The RWW policy seeks to relocate products in a warehouse from the initial arrangement to the optimal arrangement while serving …

A New Milp Approach For The Facility Layout Design Problem With Rectangular And L/T Shaped Departments, Yossi Bukchin, Michal Tzur

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In this paper we propose a new approach for the facility layout problem (FLP) and suggest new mixed-integer linear programming (MILP) formulations. The proposed approach considers simultaneously the location of the departments within the facility and the internal arrangement of the machines. Two models are suggested, where the first addresses the rectangular department case and the second allows nonrectangular departments defined by an L/T shape. New regularity constraints are developed to avoid irregular department shapes.

Strategic Design Of A Robust Supply Chain, Marc Goetschalckx, Edward Huang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The strategic design of a robust supply chain has as goal the configuration of the supply chain structure so that the performance of the supply chain remains of a consistently high quality for all possible future scenarios. We model this goal with an objective function that trades off the central tendency of the supply chain profit with the dispersion of the profit as measured by the standard deviation for any value of the weights assigned to the two components. However, the standard deviation, used as the dispersion penalty for profit maximization, has a square root expression which makes standard maximization …

Evaluating The Effect Of Operational Conditions And Practices On Warehouse Performance, Andrew L. Johnson

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Analyzing warehouse performance across different environments is critical to improving overall productivity and reducing costs. Although two-stage DEA estimators have been shown to be statistically consistent, the finite sample bias of DEA in the first stage carries over to the secondstage regression, which causes bias in the estimated coefficients of the contextual variables. The bias is particularly severe when the contextual variables are correlated with inputs. To address this shortcoming, we apply insights from Johnson and Kuosmanen (2010), who demonstrate that DEA can be formulated as a constrained special case of the Convex Nonparametric Least Squares (CNLS) regression to develop …

Comparing Transport Policies In A Full-Scale 300mm Wafer Manufacturing Facility, J. E. Kiba, S. Dauz`Ere-P´Er`Es, C. Yugma, G. Lamiable

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Research in semiconductor manufacturing ideally wants to determine the “best” transport policy to ensure continuous production. Determining such a policy is difficult because it depends on many factors such as the layout, the product types, the equipment, etc. Most of the transport policies found in the literature combine dispatching policies (scheduling of transport requests) and routing policies (selection of the path to move from one point to another). This paper investigates a policy called "minimum service" which consists in keeping a minimum number of available vehicles in bays, so that they can quickly answer transport requests and empty travel times …

The Human-Centric Warehouse, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In theory and in practice, the objective of warehouse design has long been to meet operational requirements of throughput and service performance at minimum cost. A natural product of this “bottom line” approach has been warehouse buildings and operations ill-suited to the humans who spend their working lives interacting with them. We offer an explanation for the current approach, and argue that a new approach— a new paradigm —is needed. We then describe a comprehensive approach to warehouse design that includes human well-being as a primary goal.

Forklift Routing In Warehouses Using Dual-Commands And Stackable Pallets, Ahmed Hassan, Bill Ferrell

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This research determines time optimal routes for loading and picking pallets that can be stacked on top of each other during transport in a manual warehouse that only contains full pallets and utilizes single deep storage. This research was motivated by the fact that we are seeing this situation on an ever increasing basis, particularly in warehouses that supply parts to automotive assembly. In practice, forklift drivers have developed strategies to take advantage of this opportunity but to our knowledge there is no literature that addresses this problem rigorously. The important features of this work are that a time based …

Plug-And-Work Material Handling Systems, Kai Furmans, Frank Schonung, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

One disadvantage of automated material handling systems is their relative Inflexibility: once racks are installed and conveyors are laid, making even mi-nor changes to a system can be cumbersome and expensive. However, recent progress in the capabilities and cost of basic system components, such as controllers, drives, and sensors, has made possible a new class of material handling systems having a much higher degree of flexibility. We propose underlying de- sign principles for such systems and describe several prototype plug-and-work" systems, which feature decentralized control and ease of reconfiguration.

Control Policies For A Dynamic Storage System With Multiple Lifts And Shuttles, Iris F.A. Vis, Hector J. Carlo, Paloma Diaz, Maria E. Laboy, Bruno Vanwijgaarden

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

New types of Automated Storage and Retrieval Systems, able to achieve high throughput levels, are continuously being developed and require new control polices to take full advantage of the developed system. In this paper we study a dynamic storage system as developed by Vanderlande Industries consisting of a conveyor, two lifts, multiple transfer shuttles, and a storage rack. One of the decision problems for this system is the scheduling problem of the two lifts. In other words, which lift is going to handle which request and in which order. In this paper, we derive an integrated look-ahead heuristic based on …

Digital Human Models Of People With Disabilities, Ron Hamameh

Wayne State University Theses

The current state-of-the-art in Digital Human Modeling (DHM) allows for full simulation and analysis of any task a person is required to perform at home, at work, in the military, in space, in sports, etc. The problem is that the software is missing a very important population: people with physical disabilities. What modifications and enhancements must be made to existing, commercially available DHM software to include this population?

Observer-Dependent Model For Analyzing Subjective Parameters In Epidemiology, Milad Zarei

Open Access Theses & Dissertations

Although medical technologies for preventing the contagion and spread of infectious diseases have improved steadily throughout the last century, new infectious diseases are still emerging and spreading swiftly. The modeling of infectious disease spread is crucial in addressing the lack of predictive ability in epidemiology. Managing the spread of infectious diseases requires processing quantitative epidemiological data and the ability to capture the dynamics of the infectious disease in order to provide a measure of control.

In this thesis, I have introducing cognitive biases in diseases spread modeling. For the first time, to the author's knowledge, the human subjective experience has …