Industrial Engineering Commons^™

Algorithmic And Mathematical Programming Approaches To Scheduling Problems With Energy-Based Objectives, Kan Fang

Open Access Dissertations

This dissertation studies scheduling as a means to address the increasing concerns related to energy consumption and electricity cost in manufacturing enterprises. Two classes of problems are considered in this dissertation: (i) minimizing the makespan in a permutation flow shop with peak power consumption constraints (the PFSPP problem for short) and (ii) minimizing the total electricity cost on a single machine under time-of-use tariffs (the SMSEC problem for short). We incorporate the technology of dynamic speed scaling and the variable pricing of electricity into these scheduling problems to improve energy efficiency in manufacturing.The challenge in the PFSPP problem is to …

Human Cognitive Performance In Healthcare Information System Environment And Its Application On Nursing Tasks, Byung Cheol Lee

Open Access Dissertations

The US healthcare system has serious issues in care quality and patient safety. Patients often do not receive the care they need or the given care service cause harm. In addition, the significant amounts of medical and medication errors occur, and recurring adverse drug events due to damaging side effects from medications threaten patient safety. To solve these issues, healthcare information systems (HIS) have been recommended in various care processes. Though several studies have confirmed the benefits and usefulness of the systems (Cordero, Kuehn, Kumar, & Mekhjian, 2004; Kohn, Corrigan, & Donaldson, 2000; Sittig, Krall, Kaalaas-Sittig, & Ash, 2005; Weiner …

Low Volume Dispensing With High Speed Dispensers, Sunny Agarwal

Graduate Dissertations and Theses

With the high pace of innovation in the semiconductor manufacturing industry, there has been an increasing demand for more energy efficient and environmental friendly products. This research relates to a complex process of fluid dispensing at low volumes on a printed circuit board. Currently, a more refined non-contact dispensing terminology named “Streaming” is widely used to stream out material at low volumes for various applications. The key solution is to frame a dispensing method that lends itself most closely to the requirements of a specific production process.

This study represents a detailed approach of dispensing low volumes of materials in …

The Role Of Third Party Logistics Providers (3pls) In The Adoption Of Green Supply Chain Initiatives, Edward Sweeney, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson

Practitioner Journals

The increasing importance of environmental sustainability has sharpened the focus on the need for innovative approaches to the purchasing of transport and logistics services. This article points out some of the challenges that purchasers of transport and logistics services, as well as their suppliers in the third party logistics (3PL) industry, are facing. These include the need for closer collaboration between 3PLs and their customers, as well as developing systems for the robust assessment of the environmental sustainability of services. The article is based on several years’ research experience inIreland,ItalyandSweden.

Evaluation Of Team Quality, Shiva Rama Krishna Murthy Bhagavatula

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The ever-increasing competitive pressure and sizes of the global markets have forced organizations from both manufacturing and healthcare sectors to rely more on teams. Therefore the success or the failure of an organization depends largely on the overall quality of the teams within that organization. This increased attention towards teams has forced many organizations to focus on improving the overall quality of their teams. This study has three main objectives. The first objective is to structure a comprehensive list of attributes affecting the overall quality of a team in manufacturing and healthcare sectors. The second objective is to use a …

An Optimization Model For Class Scheduling At A Dance Studio, Chirag Ojha

All Theses

Scheduling has been a large area of research for decades. A substantial amount of work has been done to express, classify, and solve scheduling problems. Most of these problems are computationally difficult to solve and require complex algorithms. In this thesis, we develop a mixed-integer linear program for a real world optimization problem at a dance studio. Similar to a university, the students in this studio request a particular class and instructors teach the classes under constrained resources such as a limited number of classrooms. The priorities of instructors as well as dancers are included to further mimic reality. Experimental …

The Assignment Problem With Dependent Costs., Ghazal Tariri

Electronic Theses and Dissertations

Assigning workers, each with their own skill set, to tasks which demand different skills in an efficient manner is a challenging problem that often requires workers to receive additional training. The training of workers is very costly with Training Magazine’s Annual Industry Report stating 58.5 billion dollars were spent in 2007 on employee training in the United States. Therefore assigning workers to tasks in such a way as to minimize the overall training costs is an important problem in many organizations. In this research, the assignment problem with dependent cost is considered, i.e. the training cost associated with assigning a …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Organization Of Information For Reversible Causes Of Pulseless In-Hospital Cardiac Arrest: A Randomized Control Trial Using A Cognitive Aid, Meera Ramachandran

All Theses

More than 200,000 in-hospital cardiac arrests are treated each year in the US with 21% survival rate. According to American Heart Association (AHA) guidelines, many causes for these arrests could be successfully treated if identified early. Such causes can be generalized as 'reversible causes'. Medical doctors identify the reversible causes associated with an arrest by recalling them from memory, using a mnemonic. In this study, using a cognitive aid such as an iPad application, the mnemonic was modified and causes were displayed alphabetically, and tested along with a new method that rank-ordered the reversible causes based on the patient context, …

Joint Location And Dispatching Decisions For Emergency Medical Service Systems, Hector Toro-Diaz

All Dissertations

Emergency Medical Service (EMS) systems are a service that provides acute care and transportation to a place for definitive care, to people experiencing a medical emergency. The ultimate goal of EMS systems is to save lives. The ability of EMS systems to do this effectively is impacted by several resource allocation decisions including location of servers (ambulances), districting of demand zones and dispatching rules for the servers. The location decision is strategic while the dispatching decision is operational. Those two decisions are usually made separately although both affect typical EMS performance measures. The service from an ambulance is usually time …

A Methodology For Designing Airports For Enhanced Security Using Simulation, Oliver Nwofia, Christopher A. Chung

Journal of Aviation Technology and Engineering

With the advent of the new security measures, today’s airports have become increasingly complex and congested. Air and passenger traffic continues to increase; consequently, the need for intelligent design concepts is required. Unlike all other existing airport designs that focused exclusively on operational performance, this study focused on the development of a new airport terminal design methodology that takes a proactive approach to minimizing the effects of security disruptions while simultaneously maximizing operational performance and passenger flow. The study addressed the impact of security operations on both the design of airport facilities and passenger flows, and discussed options and scenarios …

Entropy Applications In Industrial Engineering, Saeed Zamiri Marvizadeh

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Entropy is a fundamental measure of information content which has been applied in a wide variety of fields. We present three applications of entropy in the industrial engineering field: dispatching of Automatic Guided Vehicles (AGV), ranking and selection of simulated systems based on the mean performance measure, and comparison between random variables based on cumulative probability distributions.

The first application proposes three entropy-based AGV dispatching algorithms. We contribute to the body of knowledge by considering the consequence of potential AGV moves on the load balance of the factory before AGVs are dispatched. Kullback-Leibler directed divergence is applied to measure the …

A Sociotechnical Systems-Based Process To Facilitate The Development Of A Change Intervention Deployment Plan, Jorge Luis Nadal

EMSE Doctoral Projects

The purpose of this project was to formulate a process to facilitate the development of an effective change intervention deployment plan. The premise is that without a proper deployment plan, the successful implementation of a change intervention in an organization will be slow and require multiple revisions. This research utilized a Sociotechnical Systems (STS) approach to analyze the implementation of a major change intervention.

This research was in part prompted by a request by management of the U.S. Army Corps of Engineers (USACE) for the researcher to examine why it has taken so long to successfully implement this large-scale change …

Approximate Algorithms For The Combined Arrival-Departure Aircraft Sequencing And Reactive Scheduling Problems On Multiple Runways, Gulsah Hancerliogullari

Engineering Management & Systems Engineering Theses & Dissertations

The problem addressed in this dissertation is the Aircraft Sequencing Problem (ASP) in which a schedule must be developed to determine the assignment of each aircraft to a runway, the appropriate sequence of aircraft on each runway, and their departing or landing times. The dissertation examines the ASP over multiple runways, under mixed mode operations with the objective of minimizing the total weighted tardiness of aircraft landings and departures simultaneously. To prevent the dangers associated with wake-vortex effects, separation times enforced by Aviation Administrations (e.g., FAA) are considered, adding another level of complexity given that such times are sequence-dependent. Due …

Open Source Kiswahili Spell Checker (Sw-Tz), Hashim Twaakyondo

Tanzania Journal of Engineering and Technology (TJET)

Different English software products are localized into many native languages spoken around the world, the most popular software products localized so far are word processing software and web browsers. The effort has begun to localize these software products in Kiswahili language which is widely spoken in Tanzania, East and Central Africa. Kiswahili is an official language of Tanzania, and is a national language in Uganda and Kenya. To make these software products useful to Kiswahili speaking community particularly in Tanzania a new Kiswahili spell checker has been developed and, it uses most of the Kiswahili words spoken in Tanzania and …

Isolation And Characterisation Of Micro-Organisms With Industrial Importance From Sisal Bole Rots, Consolatha Mhaiki

Tanzania Journal of Engineering and Technology (TJET)

Investigation of microorganisms naturally acclimatized to Agave hybrid H 11648 (sisal bole rot) was conducted, with the aim of isolating and characterizing Aspergillus niger strains for industrial use. Microorganism were identified morphologically and then confirmation made by polymerase chain reaction (PCR). Results showed the existence of four major groups, listed in order of abundances as follows; Aspergilli (36.0±0.8) %, Penicillin (28.0±0.1) %, Yeast (15.0±1.6) %and Fusarium (10.0±0.12) %. The main groups of Aspergilli strains were A. nidulans, A. tamari and A. niger in ratios (3:2:2), respectively. Several endo-spore forming non-enteric gram (-) rods and coccid bacteria identified by API 20 …

2d Autocad Geometric Data Extraction And Post Processing For Numerical Control, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a method of extracting 2D geometric data from AutoCAD drawing and post processing for Numerical Control (NC) is presented. Geometric data already available in the Drawing Interchange Files (DXF) can be utilized to accurately and economically prepare part programs for controlling NC/CNC machine tools. AutoCAD, being general purpose software, stores its geometric data in a form that cannot be directly applied for automatic generation of Numerical Control (NC) codes. The way around the discrepancy between the structure of a drawing database (DXF files) and the information requirement for part programming is addressed in this work. NC programming …

Improvement Of Hydraulic Press For Vegetable Oil Expression In Rural Areas, I. P. Bateebe

Tanzania Journal of Engineering and Technology (TJET)

Cultivation of oil producing crops especially Jatropha and croton as source of vegetable oil for biodiesel production is being encouraged in rural areas. To recover oil from seed, manual press is the feasible method in rural areas where there is no electricity. Research was conducted to improve hydraulic oil press machine for rural application. Factors affecting oil recovery were found to be: moisture content of seeds, operating pressure, seed oil content, and the amount of seeds pressed per batch. Percentage oil recovery was improved by reducing diameter of press cylinder, hence increasing expression pressure, and either reducing amount of seed …

Project Based Learning In Engineering Economics: Teaching Advanced Topics Using A Stock Price Prediction Model, Lizabeth Schlemer

Industrial and Manufacturing Engineering

A graduate level advanced engineering economics class taught at California Polytechnic State University, San Luis Obispo, includes a thorough review of time value of money, investment evaluation, inflation, risk and return, financing decisions, corporate investment strategies, risk analysis and decisions incorporating non-monetary considerations. Historically this course was taught using an advanced text where the topics were covered sequentially. A redesign of the course now includes the construction of a stock price prediction model for a company of the student’s choice. Through the model, the topics are covered and discussed in the context of the large model-building project. For instance, inflation …

Exploring A High-Tech Approach To Subterranean Dwelling Environments For Commercial Implementation, Matthew Richard Gordon

Industrial and Manufacturing Engineering

People are always looking to experience something interesting and unique when on vacation. What could be more unique than staying in a hotel that is completely underground? While people have always been amazed at natural caves and other subterranean structures, the idea of spending the night in one of these is a somewhat untried area, although it could be quite the selling point. This being the case, the idea of a subterranean hotel is not so farfetched, however there are a number of issues that arise with this project. These issues include construction and selecting the proper site and building …