Industrial Engineering Commons^™

การศึกษาปัจจัยที่ก่อให้เกิดตามดในกระบวนการหล่อฉีดแรงดันสูง, แพรวดี แก้วคงคา

Chulalongkorn University Theses and Dissertations (Chula ETD)

วัตถุประสงค์ของงานวิจัยนี้คือการศึกษาปัจจัยที่ส่งผลต่อตามดในกระบวนการหล่อฉีดแรงดันสูงอลูมิเนียม R14 สำหรับคอมเพรสเซอร์ของชิ้นส่วนยานยนต์ ที่แรงดันในการฉีด 75 ถึง 85 เมกกาปาสคาล ความเร็วในการเคลื่อนที่ของลูกสูบที่ความเร็วต่ำ 0.16 ถึง 0.30 เมตรต่อวินาที ความเร็วในการเคลื่อนที่ของลูกสูบที่ความเร็วสูง 1.8 ถึง 3.0 เมตรต่อวินาที ระยะที่ลูกสูบเคลื่อนที่ด้วยความเร็วสูง 320 ถึง 340 มิลลิเมตร และแรงดันสุญญากาศ -93.0 ถึง -100.0 กิโลปาสคาล โดยการตรวจสอบการวิเคราะห์พื้นผิวตอบสนองกับวิธีบ็อกซ์-เบหน์เคน การออกแบบเพื่อศึกษาปัจจัยและความสัมพันธ์ของพารามิเตอร์และหาสภาวะที่เหมาะสมเพื่อลดสัดส่วนตามดให้เกิดขึ้นน้อยที่สุด จากผลการทดลองพบว่าทั้ง 5 ปัจจัยมีอิทธิพลต่อการเกิดข้อบกพร่องประเภทตามดอย่างมีนัยสำคัญที่ระดับความเชื่อมั่น 95 เปอร์เซ็นต์ ส่งผลให้สัดส่วนของเสียตามดลดลงเหลือ 5.18 เปอร์เซ็นต์จากการตั้งค่าสภาวะที่เหมาะสมจากการทดลองได้แก่ แรงดันในการฉีดคือ 85 เมกกะปาสกาล การเคลื่อนที่ของลูกสูบที่ความเร็วต่ำคือ 0.30 เมตรต่อวินาที การเคลื่อนที่ของลูกสูบที่ความเร็วสูงคือ 2.49 เมตรต่อวินาที ระยะที่ลูกสูบเคลื่อนที่ด้วยความเร็วสูงคือ 326.81 มิลลิเมตร และแรงดันสุญญากาศที่ -97.28 กิโลปาสกาล

Thermolysis And Kinetics Of Scrap Tyre And Bagasse For Energy Utilization, Petro Ndalila

Tanzania Journal of Engineering and Technology (TJET)

The increase of energy demand has brought concern to find alternative fuel that will at least sustain the requirement. Bagasse and scrap tyre are waste generated in our industrial activities, which can be used in energy production to subsidize the demand. This paper, aim to study the decomposition behaviour and kinetics of biomass (bagasse) and scrap tyre as preliminary stage of fuel sample analysis to be considered for energy production in gasification/combustion or pyrolysis facilities. The behaviour demonstrated with thermogravimetric analyzer (TGA), shows that all samples have high volatile amount release, 84.21% for bagasse and 85.08% for scrap tyre, which …

Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …

Modeling Reliability Growth In Accelerated Stress Testing, Jason K. Freels

Theses and Dissertations

Qualitative accelerated test methods improve system reliability by identifying and removing initial design flaws. However, schedule and cost constraints often preclude sufficient testing to generate a meaningful reliability estimate from the data obtained in these tests. In this dissertation a modified accelerated life test is proposed to assess the likelihood of attaining a reliability requirement based on tests of early system prototypes. Assuming each prototype contains an unknown number of independent competing failure modes whose respective times to occurrence are governed by a distinct Weibull law, the observed failure data from this qualitative test are shown to follow a poly-Weibull …

S1nn Gmbh & Co. Kg (Automobile Connectivity Module 1.1), Tyler Alexander Ball

Industrial and Manufacturing Engineering

The results of this report show how when diagnostics were run on the Connectivity Module 1.1, the problems discovered such as potential short-circuiting, 90-degree copper tracing angles, and components overheating/tombstoning were addressed. By using the method of “DMAIC,” which stands for Design, Measure, Analyze, Implement, Control, successful corrections were made. In the first design of the Printed Circuit Board (PCB), 1454 critical issues were found. With the newly designed PCB’s modifications being implemented, only 12 critical issues remained, which were later addressed and corrected. The results from this report are a functional Automobile Connectivity Module 1.1.

Project Management Of High School Shadow And Building An Engineer Day, Andrea M. Carroll

Industrial and Manufacturing Engineering

Building an Engineer Day and High School Shadow are semi-annual outreach events hosted by Cal Poly’s Society of Women Engineers section during fall and spring quarters. The events focus on encouraging women and minorities to take an interest in engineering. These events are the two largest outreach events hosted by The Society of Women Engineers and need to run smoothly in order to provide student attendees with a meaningful experience.

Building an Engineer Day and High School Shadow are currently un-organized and un-planned, which leads to problems with officer retention, increase in expediting process and a low attendance rate at …

Equipment Maintenance And Replacement Decision Making Processes, Michael W. Gage

Industrial and Manufacturing Engineering

This project contains recommendations for the decision making processes for support and production equipment maintenance and replacement for a large defense contractor. Recent literature has been reviewed to provide perspective on current trends in the field. A complete evaluation of their current processes and systems is included with recommendations on areas for improvement. A decision support system is also proposed to supplement their existing decision making.

Fixture For Carbon Fiber Spar Of Human Powered Helicopter, David John Ikeda, Luis Gonzalez

Industrial and Manufacturing Engineering

The following report describes our contribution to Cal Poly Human Powered Helicopter for the 2012 competition for the Sikorsky Prize offered by the American Helicopter Society. In order to win this prize the team needs to build and fly a human powered helicopter for more than 60 seconds reaching and altitude of 3 meters while staying in a 10 meter square box. Our team was created to support the integration of Carbon Fiber parts, specifically the carbon fiber spars with rotor and landing gears. Precise cutting and accurate drilling was needed and our team was tasked with creating a fixture …

Disaster Relief Models: Location Of Points Of Distribution, Othman Boudhoum

Industrial Engineering Undergraduate Honors Theses

This project consists of developing a Location Allocation model that focuses on determining the locations of relief supply Points of Distribution (PODs) after a natural disaster and how to assign demand points to them. According to FEMA, PODs are “centralized locations where the public picks up life sustaining commodities following a disaster or emergency” [1]. After each disaster, decisions have to be made to ensure a good delivery of resources in a timely manner. The road infrastructure may be damaged due to the disaster. Some roads might become inoperable, and some bridges are expected to fail. The model studied in …

Single-Depot Vehicle Routing Problem For Home Delivery Of Pharmaceutical Products, Kimberly Starr Harms

Masters Theses

Some retail pharmacies offer home delivery services to establish a competitive advantage in the growing healthcare market. The handling of orders for home delivery includes several internal and external processing and transportation activities. In this work, models were developed for use in a pharmacy delivery system to assist personnel in their daily activities. This work includes standard operating procedures for picking, packing and loading of delivery orders and the assignment and routing of vehicles to deliver customer orders. Results from simulated delivery areas identified interesting tradeoffs when comparing densely populated areas to sparsely populated areas. In addition, recommendations for order …

College Football Rankings: An Industrial Engineering Approach, Brent H. Wiles

Industrial Engineering Undergraduate Honors Theses

In using an industrial engineering approach, we utilize optimization and mathematical modeling techniques to rank college football teams when viewed as a quadratic assignment problem.

Characteristics And Contributing Factors Of Emergency Vehicle Crashes, Naji Abdelwanis

All Dissertations

The purpose of this study is to determine the contributing factors and characteristics associated with emergency vehicle(EV) crashes in order to generate insights about the emergency crashes. This dissertation consists of three approaches to address the purpose. In the first analysis a binary logistic regression model was used to identify the critical factors associated with EV crashes that resulted in fatality compared to those that did not. In the second analysis, an ordered regression model was used to identify critical factors that contributed to the severity of injuries that EV occupants experience in crashes as well as the effect of …

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

Systematic Parameter Analysis For Selective Laser Melting (Slm) Of Silver-Based Materials., Harald Rieper

Electronic Theses and Dissertations

Selective Laser Melting (SLM) is a growing technology for the additive manufacturing of parts and structures. Based on a powder layer technique, a laser locally melts the powder and forms new structures. [1] In this approach, silver-based alloy powders will be used. The processing of this kind of material is considered difficult compared to other powder materials such as mild steels or tool steels. Silver powder is a highly reflecting material and has excellent thermal conductivity. Both properties make it difficult to process using Selective Laser Melting. Due to its high price, industries use silver parts as economically as possible …

Linking Corporate Strategy To Operations : A Critical Review Of Prof. Kaplan’S Theories And The Development Of A Best-Practice Approach., Alexander Bogner

Electronic Theses and Dissertations

The rising speed of change in global frameworks drives international companies into a non-stop changing organization with the need of generating optimal revenues under changing conditions. Regarding to the need to be a flexible and competitive organization the value of a vision and a perfectly streamed strategy to this vision becomes a main success factor for global business. The trend for the need of development of a clear and constant strategy is equally rising with the trend of globalization and intercontinental business companies and therefor the business of strategy consulting rises constantly from the late 1990. Most of the strategy …

Predicting Surgical Flow Disruption Recovery In Cardiothoracic Operating Rooms, Gary Palmer Ii

All Dissertations

Disruptions are common occurrences in a variety of healthcare settings and early research has shown that they are likely contributors to medical errors. For this reason, healthcare researchers have focused on studying and understanding the nature of Surgical Flow Disruptions (SFDs) to increase patient safety and quality of care within the operating room (OR). Many researchers have used simplistic taxonomies to collect and categorize the types of SFD that occur within the OR. Others have gone further to study SFD recovery and have link unrecovered and recovered SFD to minor and major adverse events experienced by patients. This dissertation, focused …

Interaction Model Of Functions In The National Airspace System, Nathan F. Koerschner, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

The National Airspace System (NAS) is comprehensively described by five functions derived from big-picture goals: (1) conflict detection and resolution, (2) controlling aircraft states, (3) traffic flow management, (4) controlling passenger states, and (5) controlling company resources. It can be reasonably assumed that these functions interact in some way; this interaction is currently unknown. A model of the entire NAS would be helpful in discovering these interactions, yet no such comprehensive model exists. To address this problem an agent-based state-based model was created in MATLAB. To date, only functions (1) and (2) were implemented. Running the model shows that there …

Quantitative Measurement Of Intuitiveness Of Visualization Techniques, Jeongjoon Boo, Ji Soo Yi

The Summer Undergraduate Research Fellowship (SURF) Symposium

More and more visualizations and infographics are being adopted as a part of data communication (e.g., news articles and personal blogs) because they can not only present more details succinctly but also allow viewers explore data by themselves. However, when an information provider needs to decide which type of graphs, there is not much reliable information out there. For example, we do not know what portion of general public understands how to comprehend a type of graph, such as a scatter plot, without any explanation. Thus, the aim of this project is to quantify the level of intuitiveness of different …

Pulsed Laser Coating Of Bioceramic (Hap) And Niti Nanoparticles On Metallic Implants, Aayush Goswami, Gary J. Cheng

The Summer Undergraduate Research Fellowship (SURF) Symposium

This research deals with increasing the biocompatibility of the bio implants which have a global market valued more than $94.1 billion . The surface of the metal alloys used for the bone implants need to be coated with bio compatible materials like HAp(Hydroxyapatite), graphene, etc. in order to promote the growth of cells(osteoblasts) on the surface of the implants. Various techniques like plasma spray coating, ion beam sputter coating, etc. have been used before to coat such materials on a substrate, however these have faced problems of coating quality. In order to perfect this coating, that is make it more …

Design, Development, And Testing Of A Conformal Power Control Interface For Thrust Vectoring Aircraft, David Rozovski

Open Access Dissertations

Over the last five years, a new power control inceptor for tiltrotor aircraft, known as the Rotational Throttle Interface (RTI) was designed and built. Prior to the RTI, no tiltrotor inceptor had been able to simultaneously indicate both the direction and magnitude of thrust conformally. The purpose of the RTI is to provide an interface that maps to the intended vehicle response throughout ALL ranges of operation. Doing so is expected to reduce confusion that may have contributed to several tiltrotor accidents

Two tests were conducted with the RTI, one at the NASA Vertical Motion Simulator, and one at Canada's …