Mining Engineering Commons^™

De-Blocking Technology And Application Of High-Rank Cbm Well In Junlian Region In Sichuan Province, Peng Lisha, Zhang Yimin, Xiong Wei, Zhao Dan, Luo Kai

Coal Geology & Exploration

The coal seams of Leping Formation in Junlian area are high-rank coal reservoir with low porosity and low permeability. The gas production of some coalbed methane wells decreases rapidly in the production process, which seriously restricts the benefit development of coalbed methane wells. Combined with the production data such as drainage, hydrochemistry and pump inspection, this paper analyzes the reasons for the decline of gas production. The main reasons for the decline are coal scaling and coal fines blockage. Targeted measures such as acid pickling, hydraulic shock, plasma pulse and water injection are carried out to remove the blockage. The …

Mine Water Inflow Modes And Scientific Design Of Drainage Boreholes In Roof Confined Aquifer Of Coal Seam, Hu Weiyue, Ji Yadong, Huang Huan

Coal Geology & Exploration

Aiming at the uncertainty of mine water inflow mode, this paper analyzes the spatiotemporal variation characteristics of mine water inflow at first, and get a conclusion that the mine water is composed of static storage and dynamic recharge. And the static storage is mainly affected by weighting interval, the aquifer thickness of caving and fracture zone height and specific yield; the dynamic recharge is mainly affected by caving and fracture zone height and specific yield, hydraulic gradient in permeable flow field and discharge section area. According to the spatial relationships between water conducted fissure and roof aquifer of coal seam, …

Experimental Study On Visual System For Water-Blocking Process Of Hydrodynamic Roadway By Aggregate Pouring In Water Inrush Mine, Mou Lin

Coal Geology & Exploration

Blocking water of hydrodynamic roadway by aggregate pouring in water inrush mines is an important method for mine rescue. To study its mechanism, the experimental platform of similar simulation test was established based on such factors as water head height, flow rate, roadway size, inclination angle, roughness, aggregate particle size and perfusion speed. Based on the platform, single-hole and multi-hole pouring tests were carried out to analyze the movement and accumulation law of aggregate in hydrodynamic pathway. The results are as follows. Firstly, the accumulation body has the characteristics of migration and growth to the downstream during the normal pouring …

Blending Interference Noise Separation Method Of Simultaneous Source Seismic Data Based On Multi-T-X Domain Combination, Yu Dai, Huang Dezhi, Sun Yuan, Yang Wenping

Coal Geology & Exploration

With the increasing application of simultaneous source seismic data acquisition method in seismic oil and gas exploration, many scholars have studied the key technology of simultaneous source seismic data blending interference noise separation. So far, research on methods with higher fidelity is still needed. This article is based on the following assumptions: Normal Moveout Correction(NMO) in simultaneous source seismic data can enhance the linear distribution degree of reflection(especially in Common Middle Point(CMP) gather), and expand the distribution difference of reflection and blending interference noise; single domain separation of blending interference noise only aims at a certain distribution characteristic difference of …

Research On The Integrated Electric Exploration System For Coal Mines And Its Application, Liu Baobao, Guo Chun, Yang Haitao

Coal Geology & Exploration

In order to overcome the shortcomings of the existing electrical prospecting technology in coal mines, such as multiple construction of electrical sounding, electrical profile and electrical penetration and a scarcity of data collected, an integrated electrical prospecting system is successfully designed, absorbing the idea of parallel electrical data acquisition, and applying the "rectangular wave" electrode layout mode combined with the "multi device data extraction" technology. The experimental results show that the system can complete the original data acquisition of electrical sounding, electrical profile, electrical perspective and other electrical construction methods with one-time wiring and one-round power supply, and extract the …

Improvement And Test Of Radar Imaging Logging Tool For Oil And Gas Wells, Zhao Yonggang

Coal Geology & Exploration

The detection depth of traditional logging tools is basically less than 3 m, and without azimuth resolution, the formation structure in larger area around wells cannot be imaged. Therefore the problems arising in the detection of subtle structure and oil and gas reservoirs can not be solved. In response to such problems, radar imaging logging tool is developed by applying ground penetrating radar imaging technology to logging. In order to improve the detection depth, azimuth resolution and downhole depth of the tool, a nanosecond pulse source and directional receiving antennae are used to detect and image the formation around the …

Application Of Air Foam Composite Directional Drilling Technology In Broken Soft Coal Seams, Liu Jianlin, Fang Jun, Chu Zhiwei, Yang Weifeng

Coal Geology & Exploration

In order to meet the requirements of air screw motor cooling and lubrication, coal dust removal treatment at the orifice and water outlet disposal in the air directional drilling, an air foam composite directional drilling technology for broken soft coal seams has been developed based on the analysis of drilling slag migration characteristics of air directional drilling. The key technologies such as stable and efficient foaming, "mechanical + foam" composite slag discharge and "air + foam" composite drilling were integrated. The technology was also equipped with directional drillrig, foam generation perfusion system, air screw motor, special-shaped drill pipe and measurement …

Determination Of The Stress-Strain State Of Rock Mass And Zone Of Inelastic Deformation Around Underground Mine Excavation Using Modern Methods Of Numerical Modelling, Sergey A. Ignatiev, Aleksandr E. Sudarikov, Askar Zh. Imashev

Journal of Sustainable Mining

The paper reviews methods and trends of numerical modelling of geomechanical processes around underground mine excavations. The most rational method of determining the additional stresses caused by the mine excavations is chosen. Mathematical modelling was performed for excavations of various cross sections and different strength of rocks. The dimensions of the inelastic deformation zone around the mine excavations have been identified. The area of the total fracture zone around the excavation, as well as the area of the roof fracture zone are calculated. The results of the fracture zone modelling are presented both as coordinates and in a graphical form. …

Rapid Selection Of Moving Wagons In The Sequence Of Video Frames Based On The Method Of Calculating The Optical Flow, Bahodir Muminov Prof.

Bulletin of TUIT: Management and Communication Technologies

With the advent of digital video cameras, it has become possible to process measurement data using a computer, which has led to a wide range of new tasks in digital signal processing. Examples of such tasks are perimeter observation and detection of a moving object, recognition of a moving object, and identification of an object. Research and development of algorithms for processing video data, as a rule, requires a time-consuming computational experiment on model and real data of a large volume. Therefore, it is important to correctly organize the computational process when modifying and testing algorithms.

Thin Safety Margin: The Sefor Super-Prompt-Critical Transient Experiments, Ozark Mountains, Arkansas 1970–1971, Jerry Havens, Collis Geren

Arkansas Scholarly Editions

Thin Safety Margin charts the history of SEFOR, a twenty-megawatt reactor that operated for three years in the rural Ozark Mountains of Arkansas as part of an internationally sponsored program designed to demonstrate the Doppler effect in plutonium-oxide-fueled fast reactors. Authors Jerry Havens and Collis Geren draw upon this history to assess the accidental explosion risk inherent in using fast reactors to reduce the energy industry’s carbon dioxide emissions.

If a sufficiently powerful fast-neutron explosion were to cause the containment of a reactor such as SEFOR’s to fail, the reactor’s radiotoxic plutonium fuel could vaporize and escape into the surrounding …

Socio-Ecological Analysis Of Artisanal Gold Mining In West Africa: A Case Study Of Ghana, Richard Takyi, Rasha Hassan, Badr El Mahrad, Richard Adade

Journal of Sustainable Mining

The surge in artisanal gold mining (AGM) activities and the associated environmental impact in Ghana have elicited several stakeholders' attempts to curb the problem. However, due to little understanding of the underlying issues, these efforts have been ineffective. This study aims to use a socio-ecological framework to analyze drivers of AGM activities, the environmental pressures, the state change, their impact on human welfare, and the management response as measures (DAPSI(W)R(M)) to the problem. Evaluate AGM's impact on Ghana's ability to achieve the United Nations Sustainable Development Goals (SDGs). Data were collected from relevant literature on the subject and analyzed with …

Growth Of Invasive Plant Species Communities As A Substantial Issue In Post-Mining Land Development, Paweł Olszewski

Journal of Sustainable Mining

This article concerns the issue of the appearance and growth of invasive plant species in land degraded by hard coal mining and the repercussions of this process, particularly in the context of land reclamation. These species, such as Canadian goldenrod or Japanese knotweed, which nearly always form extensive and monocultural patches of vegetation, contribute to the displacement of both native species and those introduced as part of biological restoration. In 2015, the Central Mining Institute in Katowice prepared a land development concept for a part of the area of the former KWK Paryż mine in Dąbrowa Górnicza (Upper Silesian Industrial …

Microscopic Diffusion Characteristics Of Linear Alkylbenzene Sulfonates On The Surface Of Anthracite: The Influence Of Different Attachment Sites Of Benzene Ring In The Backbone, Xuanlai Chen, Guochao Yan, Xianglin Yang, Guang Xu, Shuai Wei

Mining Engineering Faculty Research & Creative Works

In order to explore the effect of the attachment site of the benzene ring in the backbone of the surfactant on its diffusion characteristics on the surface of anthracite, the molecular dynamics simulation method was used, and the four isomers (m-C16, m = 2,4,6,8; m represents the attachment site of the benzene ring in the backbone) of sodium hexadecyl benzene sulfonate (SHS) were selected. Binary models of surfactant/anthracite, surfactant/graphene modified by oxygen-containing functional groups, and a ternary model of water/surfactant/anthracite were constructed. By analyzing a series of properties such as interaction energy, contact surface area, relative concentration distribution, radial distribution …

The Factors Impacting The Incorporation Of The Sustainable Development Goals Into Raw Materials Engineering Curricula, Dimitris Damigos, George Valakas, Anna Gaki, Katerina Adam

Journal of Sustainable Mining

It is widely recognised and acknowledged that the mining industry, if properly operating and managed, has the potential to positively contribute to “The 2030 Agenda for Sustainable Development”. In this direction, the Raw Materials (RM) engineering education possesses a crucial role, given the need to instil in tomorrow’s mining engineers the sustainability principles. This paper explores the educational needs of the Greek RM sector and the factors constituting the RM whole value chain SDGs-education-innovation eco-system. The research follows a two-stage focus group approach. First, the perceptions, opinions and beliefs of invited stakeholders were explored in the context of semi-structured interviews. …

The Behaviour Of Rare Earth Elements From South African Coal Fly Ash During Enrichment Processes: Wet, Magnetic Separation And Zeolitisation, Mero Lee Ursula Cornelius, Alechine Emmanuel Ameh, Chuks Paul Eze, Olanrewaju Fatoba, Asel Sartbaeva, Leslie Felicia Petrik

Mining Engineering Faculty Research & Creative Works

Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorization to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South …

Effect Of Shock Vector/Polarization Vector Configuration On The Generation Of Ultrahigh Voltage By Adiabatically Compressed Ferroelectric Materials, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov

Mining Engineering Faculty Research & Creative Works

Compact autonomous megawatt-power systems based on shock depolarization of ferroelectric materials are capable of producing kiloampere currents and ultrahigh-voltage pulses with amplitudes exceeding 100kV. Herein, we report the results of experimental investigations of the generation of ultrahigh voltage by poled Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 and Pb0.99(Zr0.52Ti0.48)0.98Nb0.01O3 ferroelectrics subjected to shock loading at different shock vector/polarization vector configurations. Our experiments demonstrated that under loading perpendicular to the polarization vector (transverse stress mode) the ferroelectrics are capable of generating high voltages exceeding 400kV, while the loading parallel to the polarization vector (longitudinal stress mode) causes a distortion of the depolarization process in ferroelectrics of large …

Experimental Study On Advanced Real Time Detection System Of Seismic-While-Excavating, Wang Ji, Qin Si, Wu Hai, Zhang Qingqing, Yu Junhui, Su Xiaoyun

Coal Geology & Exploration

Experimental study on advanced real time detection system of seismic-while-excavating

Three-Component Seismic Data Acquisition System Of Coal Mine Based On Mems And Lwip, Wang Huaixiu, Qiu Shuai, Zhu Guowei, Chen Bo

Coal Geology & Exploration

Three-component seismic data acquisition system of coal mine based on MEMS and LwIP

Depth Correction Technique Of Electrical Marker Based On Electrical Field Component Of Csamt, Liu Zuiliang, Zhang Fenxuan, Zhang Jifeng, Zhou Guangyu, Zhao Hui, Zhang Xin

Coal Geology & Exploration

Depth correction technique of electrical marker based on electrical field component of CSAMT

Evaluation On The Resolution Ability Of Underground Transient Electromagnetic Instrument To Disaster-Causing Water Bodies, Zhao Zhongnan, Xu Yangcheng, Wu Yanqing, Tan Qingqing, Kang Yueming, Wang Yao

Coal Geology & Exploration

Evaluation on the resolution ability of underground transient electromagnetic instrument to disaster-causing water bodies