Open Access. Powered by Scholars. Published by Universities.®
Science and Technology Studies Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication
- File Type
Articles 1 - 20 of 20
Full-Text Articles in Science and Technology Studies
High Retention Membrane Bioreactors: Challenges And Opportunities, Wenhai Luo, Faisal Ibney Hai, William Price, Wenshan Guo, Hao H. Ngo, Kazuo Yamamoto, Long Nghiem
High Retention Membrane Bioreactors: Challenges And Opportunities, Wenhai Luo, Faisal Ibney Hai, William Price, Wenshan Guo, Hao H. Ngo, Kazuo Yamamoto, Long Nghiem
Faisal I Hai
Extensive research has focussed on the development of novel high retention membrane bioreactor (HR-MBR) systems for wastewater reclamation in recent years. HR-MBR integrates high rejection membrane separation with conventional biological treatment in a single step. High rejection membrane separation processes currently used in HR-MBR applications include nanofiltration, forward osmosis, and membrane distillation. In these HR-MBR systems, organic contaminants can be effectively retained, prolonging their retention time in the bioreactor and thus enhancing their biodegradation. Therefore, HR-MBR can offer a reliable and elegant solution to produce high quality effluent. However, there are several technological challenges associated with the development of HR-MBR, …
Over-Voltage Mitigation Within Distribution Networks With A High Renewable Distributed Generation Penetration, Joel Kennedy, Philip Ciufo, Ashish Agalgaonkar
Over-Voltage Mitigation Within Distribution Networks With A High Renewable Distributed Generation Penetration, Joel Kennedy, Philip Ciufo, Ashish Agalgaonkar
Dr Philip Ciufo
The rapid growth of grid-connected distributed generation has increased the likelihood of over-voltage occurrences in distribution networks. In recent times, much research has taken place in order to develop a control strategy to mitigate the voltage rise problem. However, most of the published strategies require re-tuning when additional resources are connected, or have a strong dependence on network parameters, such as fault level. This paper proposes a novel over-voltage mitigation scheme that has many advantages not observed in literature. Firstly, the control scheme can integrate with an existing feeder in a plug-and-play fashion. No prior analysis is necessary to configure …
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
Anthony A Espinoza Mr
High dose rate (HDR) brachytherapy is a radiation treatment technique capable of delivering large dose rates to the tumor. Radiation is delivered using remote afterloaders to drive highly active sources (commonly 192Ir with an air KERMA strength range between 20 000 and 40 000 U, where 1 U = 1 uGy m2/h in air) through applicators directly into the patient's prescribed region of treatment. Due to the obvious ramifications of incorrect treatment while using such an active source, it is essential that there are methods for quality assurance (QA) that can directly and accurately verify the treatment plan and the …
The Asian Evolution Of High Speed Rail, Philip G. Laird
The Asian Evolution Of High Speed Rail, Philip G. Laird
Dr Philip Laird
In Australia, in 2001, the Howard government released an East Coast HSR Scoping Study. This followed two major investigations by the private sector into HSR options for Australia; the first being a Sydney Canberra Melbourne Very Fast Train as proposed in 1984 by CSIRO, and the second being the Sydney Canberra Speed HSR proposal.
High Speed Rail In Australia - Much Studied And Slow To Start, Philip Laird
High Speed Rail In Australia - Much Studied And Slow To Start, Philip Laird
Dr Philip Laird
High Speed Rail or HSR with electric passenger trains operating at speeds of 250km/h or more is now operational in 11 countries and has been under recent consideration in Australia for future operation between Melbourne, Canberra, Sydney and Brisbane. The paper outlines HSR studies in Australia and conditionally quantifies the potential reduction of aviation fuel use at up to 0.5m litres per annum from the introduction of HSR by 2020 in Australia with a reduction of external costs at $540m per annum by 2020. In addition, HSR in Eastern Australia by 2020 could allow for some 300 slots to be …
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
Stéphanie Corde
High dose rate (HDR) brachytherapy is a radiation treatment technique capable of delivering large dose rates to the tumor. Radiation is delivered using remote afterloaders to drive highly active sources (commonly 192Ir with an air KERMA strength range between 20 000 and 40 000 U, where 1 U = 1 uGy m2/h in air) through applicators directly into the patient's prescribed region of treatment. Due to the obvious ramifications of incorrect treatment while using such an active source, it is essential that there are methods for quality assurance (QA) that can directly and accurately verify the treatment plan and the …
Impact On Transient And Frequency Stability For A Power System At Very High Wind Penetration, Lasantha Meegahapola, Damian Flynn
Impact On Transient And Frequency Stability For A Power System At Very High Wind Penetration, Lasantha Meegahapola, Damian Flynn
Dr Lasantha G Meegahapola
This paper analyzes the impact on transient and frequency stability for a power system at very high wind penetration (40% wind). Wind penetration is based on the doubly-fed induction generator (DFIG), and a systematic approach has been adopted for wind power integration. A sensitivity analysis has been carried out for each wind integration scenario and for different wind generator loading conditions. A range of fault locations has been selected for stability analysis based on the proximity to synchronous generation and wind farms. The analysis has shown that transient stability performance is subject to fault location in the network, especially when …
Transient Stability Analysis Of A Power System With High Wind Penetration, Lasantha Meegahapola, Damian Flynn, Tim Littler
Transient Stability Analysis Of A Power System With High Wind Penetration, Lasantha Meegahapola, Damian Flynn, Tim Littler
Dr Lasantha G Meegahapola
This paper presents transient stability analysis for a power system with high wind penetration. The transient stability has been evaluated based on two stability criteria: rotor angle stability and voltage stability. A modified IEEE-14 bus system has been used as the main study network and simulations have been conducted at several wind power penetration levels, defined as a fraction of total system generation. A wide range of scenarios have been presented based on the wind farm voltage at the point of connection, i.e. low voltage (LV) distribution level and high voltage (HV) transmission level, and the type of wind generator …
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
The Feasibility Study And Characterziation Of A Two-Dimensional Diode Array In “Magic Phantom” For High Dose Rate Brachytherapy Quality Assurance, A Espinoza, B Beeksma, M Petasecca, I Fuduli, C Porumb, D L. Cutajar, S Corde, M A. Jackson, M Lf Lerch, Anatoly B. Rosenfeld
Michael L.F. Lerch
High dose rate (HDR) brachytherapy is a radiation treatment technique capable of delivering large dose rates to the tumor. Radiation is delivered using remote afterloaders to drive highly active sources (commonly 192Ir with an air KERMA strength range between 20 000 and 40 000 U, where 1 U = 1 uGy m2/h in air) through applicators directly into the patient's prescribed region of treatment. Due to the obvious ramifications of incorrect treatment while using such an active source, it is essential that there are methods for quality assurance (QA) that can directly and accurately verify the treatment plan and the …
A Real-Time In Vivo Dosimetric Verification Method For High-Dose Rate Intracavitary Brachytherapy Of Nasopharyngeal Carcinoma, Zhen-Yu Qi, Xiao-Wu Deng, X Cao, Shao-Min Huang, Michael Lerch, Anatoly Rosenfeld
A Real-Time In Vivo Dosimetric Verification Method For High-Dose Rate Intracavitary Brachytherapy Of Nasopharyngeal Carcinoma, Zhen-Yu Qi, Xiao-Wu Deng, X Cao, Shao-Min Huang, Michael Lerch, Anatoly Rosenfeld
Michael L.F. Lerch
Purpose: A real-time in vivo dosimetric verification method using metal-oxide-semiconductor field effect transistor (MOSFET) dosimeters has been developed for patient dosimetry in high-dose rate (HDR) intracavitary brachytherapy of nasopharyngeal carcinoma (NPC). Methods: The necessary calibration and correction factors for MOSFET measurements in 192Iridium source were determined in a water phantom. With the detector placed inside a custom-made nasopharyngeal applicator, the actual dose delivered to the tumor was measured in vivo and compared to the calculated values using a commercial brachytherapy planning system. Results: Five MOSFETs were independently calibrated with the HDR source, yielding calibration factors of 0.48 ± 0.007 cGymV. …
Performance Comparison Of Two Compact Multiplexed Readouts With Sensl's Spmarray4 For High-Resolution Detector Module, Yujin Qi, Xiaohui Zhang, Cuilan Zhao, Lihong Chen, Marco Petasecca, Mitra Safavi-Naeini, Michael Lerch, Anatoly Rosenfeld
Performance Comparison Of Two Compact Multiplexed Readouts With Sensl's Spmarray4 For High-Resolution Detector Module, Yujin Qi, Xiaohui Zhang, Cuilan Zhao, Lihong Chen, Marco Petasecca, Mitra Safavi-Naeini, Michael Lerch, Anatoly Rosenfeld
Michael L.F. Lerch
The purpose of this study was to investigate a compact readout for silicon photomultiplier (SiPM) array in the development of high-resolution imaging detector to reduce the readout channels while maximizing the detectors performance. The detector module was composed of a LYSO scintillation crystal array and a SensL's SPMArray4. The crystal array was coupled to the SiPM array with a 2mm-thick silicone pad to improve the light sharing among the SiPM array elements. Three LYSO crystal arrays of 4x4, 8x8 and 12x12 crystal elements with pixel sizes of 3.2, 1.6 and 1.0 mm were investigated in this study. Two compact multiplexed …
Dynamic Testing Of Tekseal High Yield Grout To Provide An Orepass Plug Designed For Impact, I V. S Mutton, Alexander Remennikov, D Pateman
Dynamic Testing Of Tekseal High Yield Grout To Provide An Orepass Plug Designed For Impact, I V. S Mutton, Alexander Remennikov, D Pateman
Alex Remennikov
Significant wear in orepasses particularly in the brow and chute areas is proportional to the tonnage throughput with increased wear associated with running orepasses empty. During planned shutdowns it may be necessary to isolate maintenance crews from objects falling from orepasses. In the last 15 years grout orepass plugs that can later be easily removed have been poured above chute maintenance areas. These provide protection from high energy impact and isolating workers from the hazard. Construction and removal methods will be briefly explained. Since it is not feasible to investigate the problem of orepass plug impact response using full-scale experimental …
Development Of Safe Optimized Welding Procedures For High Strength Q&T Steel Welded With Austenitic Consumables, Lenka Kuzmikova, Huijun Li, John Norrish, Zengxi Stephen Pan, Nathan Larkin
Development Of Safe Optimized Welding Procedures For High Strength Q&T Steel Welded With Austenitic Consumables, Lenka Kuzmikova, Huijun Li, John Norrish, Zengxi Stephen Pan, Nathan Larkin
zengxi pan
High strength quenched and tempered (Q&T) steels offer obvious economic benefits originating from their advantageous strength to price and weight ratios. These steels are usually welded using ferritic consumables and for this combination the risk of hydrogen assisted cold cracking (HACC) is high. The use of austenitic stainless steel (ASS) consumables has great potential to significantly improve this issue. Yet, there are no guidelines for determination of safe level of preheat for welding ferritic steels with ASS consumables. For this reason manufacturers adopt this parameter from procedures developed for conventional ferritic consumables thus significantly limiting the benefits ASS consumables are …
Investigation Into Feasibility Of Hybrid Laser-Gmaw Process For Welding High Strength Quenched And Tempered Steel, Lenka Kuzmikova, Nathan Larkin, Zengxi Pan, Mark Callaghan, Huijun Li, John Norrish
Investigation Into Feasibility Of Hybrid Laser-Gmaw Process For Welding High Strength Quenched And Tempered Steel, Lenka Kuzmikova, Nathan Larkin, Zengxi Pan, Mark Callaghan, Huijun Li, John Norrish
zengxi pan
In this study, the feasibility of hybrid laser-gas metal arc welding process for replacement of conventional flux-cored arc welding procedure for welding high strength quenched and tempered steel was investigated. Experimental work focused on optimisation of process parameters to produce joint with desired properties. Hardness of the weld heat affected zone produced by both processes has been measured. Productivity and cost effectiveness of both processes were compared. It was concluded that hybrid laser-gas metal arc welding process is suitable for welding high strength quenched and tempered steel.
A Real-Time In Vivo Dosimetric Verification Method For High-Dose Rate Intracavitary Brachytherapy Of Nasopharyngeal Carcinoma, Zhen-Yu Qi, Xiao-Wu Deng, X Cao, Shao-Min Huang, Michael L. Lerch, Anatoly B. Rosenfeld
A Real-Time In Vivo Dosimetric Verification Method For High-Dose Rate Intracavitary Brachytherapy Of Nasopharyngeal Carcinoma, Zhen-Yu Qi, Xiao-Wu Deng, X Cao, Shao-Min Huang, Michael L. Lerch, Anatoly B. Rosenfeld
Anatoly Rozenfeld
Purpose: A real-time in vivo dosimetric verification method using metal-oxide-semiconductor field effect transistor (MOSFET) dosimeters has been developed for patient dosimetry in high-dose rate (HDR) intracavitary brachytherapy of nasopharyngeal carcinoma (NPC). Methods: The necessary calibration and correction factors for MOSFET measurements in 192Iridium source were determined in a water phantom. With the detector placed inside a custom-made nasopharyngeal applicator, the actual dose delivered to the tumor was measured in vivo and compared to the calculated values using a commercial brachytherapy planning system. Results: Five MOSFETs were independently calibrated with the HDR source, yielding calibration factors of 0.48 ± 0.007 cGymV. …
Improvements In Dose Calculation Accuracy For Small Off-Axis Targets In High Dose Per Fraction Tomotherapy, Nicholas Hardcastle, Adam Bayliss, Jeannie Wong, Anatoly B. Rosenfeld, Wolfgang A. Tome
Improvements In Dose Calculation Accuracy For Small Off-Axis Targets In High Dose Per Fraction Tomotherapy, Nicholas Hardcastle, Adam Bayliss, Jeannie Wong, Anatoly B. Rosenfeld, Wolfgang A. Tome
Anatoly Rozenfeld
Purpose: A recent field safety notice from TomoTherapy detailed the underdosing of small, off-axis targets when receiving high doses per fraction. This is due to angular undersampling in the dose calculation gantry angles. This study evaluates a correction method to reduce the underdosing, to be implemented in the current version (v4.1) of the TomoTherapy treatment planning software. Methods: The correction method, termed "Super Sampling" involved the tripling of the number of gantry angles from which the dose is calculated during optimization and dose calculation. Radiochromic film was used to measure the dose to small targets at various off-axis distances receiving …
Very High Data Rate Mb-Ofdm Uwb Systems With Transmit Diversity Techniques, Ngoc Phuc Le, Le Chung Tran, Farzad Safaei
Very High Data Rate Mb-Ofdm Uwb Systems With Transmit Diversity Techniques, Ngoc Phuc Le, Le Chung Tran, Farzad Safaei
Professor Farzad Safaei
In this paper, the application of space time block codes in a very high data rate multiband-OFDM ultra-wideband (VHDR MB-OFDM UWB) system, where the Modified Dual Carrier Modulation (MDCM) scheme and Low Density Parity Check codes are deployed, is investigated. First, we present a new table-based mapping approach and derive soft-demapping expressions for the MDCM scheme. We then propose a space-time-frequency coded VHDR MB-OFDM UWB system by incorporating space time block codes into the conventional VHDR MB-OFDM UWB system. Numerical simulations of the system supporting a data rate of 1Gbps over the IEEE 802.15.3a channel models are implemented. The simulation …
Double Space-Time Transmit Diversity For Very High Data Rate Mb-Ofdm Uwb Systems, Ngoc P. Le, Le C. Tran, Farzad Safaei
Double Space-Time Transmit Diversity For Very High Data Rate Mb-Ofdm Uwb Systems, Ngoc P. Le, Le C. Tran, Farzad Safaei
Professor Farzad Safaei
In this paper, we investigate a multiband-orthogonal frequency division multiplexing ultra-wideband (MB-OFDM UWB) system with very high data rates (VHDR) of several gigabits per second (Gbps). We propose a DSTTD-based VHDR MB-OFDM UWB system by incorporating a double space-time transmit diversity (DSTTD) scheme into the conventional MB-OFDM UWB system. At the receiver, an efficient soft-demapper that takes into consideration the noise enhancement due to a zero-forcing equalization is developed. Numerical simulations of the proposed system at a very high data rate of 2.Gbps over the IEEE 802.15.3a channel models are implemented. The simulation results show that this system could achieve …
Graphene Micro-Substrate Induced High Electron-Phonon Coupling In Mgb2, W X. Li, X Xu, K S. B De Silva, F X. Xiang, S X. Dou
Graphene Micro-Substrate Induced High Electron-Phonon Coupling In Mgb2, W X. Li, X Xu, K S. B De Silva, F X. Xiang, S X. Dou
Shi Xue Dou
Electron-phonon coupling strength was studied in graphene-MgB2 composites to explore the possibilities for a higher superconducting transition temperature (Tc). For the first time in the experimental work on MgB2, the Raman active E2g mode was split into two parts: a softened mode corresponding to tensile strain and a hardened mode attributed to the carbon substitution effect. The tensile strain effect is suggested to improve Tc of graphene-MgB2 composites because it increases the electron-phonon coupling strength of MgB2.
Investigation Into Feasibility Of Hybrid Laser-Gmaw Process For Welding High Strength Quenched And Tempered Steel, Lenka Kuzmikova, Nathan Larkin, Zengxi Pan, Mark Callaghan, Huijun Li, John Norrish
Investigation Into Feasibility Of Hybrid Laser-Gmaw Process For Welding High Strength Quenched And Tempered Steel, Lenka Kuzmikova, Nathan Larkin, Zengxi Pan, Mark Callaghan, Huijun Li, John Norrish
Nathan Larkin
In this study, the feasibility of hybrid laser-gas metal arc welding process for replacement of conventional flux-cored arc welding procedure for welding high strength quenched and tempered steel was investigated. Experimental work focused on optimisation of process parameters to produce joint with desired properties. Hardness of the weld heat affected zone produced by both processes has been measured. Productivity and cost effectiveness of both processes were compared. It was concluded that hybrid laser-gas metal arc welding process is suitable for welding high strength quenched and tempered steel.