Physics Commons^™

Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin

Conference Papers

A theoretical model has previously been developed to calculate the holographic recording beam angles required in air (at any recording wavelength) to produce a Volume Holographic Optical Element (VHOE) for operation as a coupler for different input and output angles. In this paper, the experimental study is extended to further validate the VHOE coupler design and fabrication approach for additional incident beam angles, comparing -40° -45° and -50° (in air). The output angle for each VHOE is +45° within the medium and the coupler operational wavelength is 633nm. Holographic recording in Bayfol HX 200 photopolymer at 532nm is used to …

Miniaturized Iii-V/ Si Hybrid Laser With An Integrated Modulator, Praveen Kumar Singaravelu

Theses

Light interaction with microscopic and nanoscopic structures enable manipulation of its characteristics which can be used to detect objects in 3D sensing, propel satellites to space using photonic propulsion and transmit data through optical communication. For optical communication, the basic components are lasers, modulators and photodetectors. The development of CMOS microfabrication foundries helps to manufacture silicon-based photonic devices with high yield that is directly co-integrated with electronics in a single chip. However, the lack of emission of photons efficiently in silicon propelled the necessity of hybrid photonic devices that inherits the combined advantage of different materials i.e. functionality and volume. …

Nano-Fabricated Atomic Waveguides For Inertial Measurements, Adrian S. Orozco

Physics & Astronomy ETDs

Atom-based inertial measurement systems can measure acceleration and rotation very precisely in the laboratory. The central element of these systems is atom interferometry where the phase shifts are sensitive to inertial forces experienced by the atom. This phenomenon has been used to make atom-based gravimeters, gradiometers, and gyroscopes. Recent effort has been made to make these systems more compact which require small size, light weight, and low power (SWaP). Nano-fabricated waveguides, such as photonic waveguides or optical nanofibers, offer a promising avenue to meet these goals. They have dimensions comparable to the guided light’s wavelength producing a mode that not …

Plasmonic Waveguides To Enhance Quantum Electrodynamic Phenomena At The Nanoscale, Ying Li, Christos Argyropoulos

Department of Electrical and Computer Engineering: Faculty Publications

The emerging field of plasmonics can lead to enhanced light-matter interactions at extremely nanoscale regions. Plasmonic (metallic) devices promise to efficiently control both classical and quantum properties of light. Plasmonic waveguides are usually used to excite confined electromagnetic modes at the nanoscale that can strongly interact with matter. The analysis of these nanowaveguides exhibits similarities with their low frequency microwave counterparts. In this article, we review ways to study plasmonic nanostructures coupled to quantum optical emitters from a classical electromagnetic perspective. These quantum emitters are mainly used to generate single-photon quantum light that can be employed as a quantum bit …

Photonic Tools For Advanced Sensing And Imaging At The Nanoscale., Jafar Hamed Ghithan

Electronic Theses and Dissertations

This dissertation reports a novel bio-sensing strategy based on single-mode, electro-active, integrated optical waveguide (SM-EA-IOW) platforms. It also reports the development of a super-resolved far-field optical imaging tool to enable optical, electronic, and spectroelectrochemical investigations at the nanoscale. SM-EA-IOW platforms with its outstanding sensitivity for spectroelectrochemical interrogation was combined with a sandwich bioassay for the development of a novel immunosensing based strategy for label-free detection of infectious pathogens. The strategy begins with the functionalization of the electroactive waveguide surface with a capturing antibody aimed at a specific target analyte. Once the target analyte is bound to the photonic interface, it …

Compact Sensing Platforms Based On Localized Surface Plasmon Resonance, Zhutian Ding

Electronic Thesis and Dissertation Repository

The development of plasmonic sensors mainly focuses on the improvement of their sensitivities that are approaching the theoretical limit. This work aims to propose, fabricate and characterize compact sensing platforms that are highly adaptable and easy to be miniaturized, without compromising their sensitivities. A plasmonic sensing system that allows the excitation of localized surface plasmon resonance (LSPR) by individual waveguide modes is presented conceptually and experimentally. Another compact sensing platform is proposed based on the ensemble hypothesis developed in this thesis.

A Mass-Producible And Versatile Sensing System: Localized Surface Plasmon Resonance Excited By Individual Waveguide Modes, Zhutian Ding, James M. Stubbs, Danielle Mcrae, Johanna M. Blacquiere, François Lagugné-Labarthet, Silvia Mittler

Physics and Astronomy Publications

A plasmonic sensing system that allows the excitation of localized surface plasmon resonance (LSPR) by individual waveguide modes is presented conceptually and experimentally. Any change in the local environment of the gold nanoparticles (AuNPs) alters the degree of coupling between LSPR and a polymer slab waveguide, which then modulates the transmission-output signal. In comparison to conventional LSPR sensors, this system is less susceptible to optical noise and positional variation of signals. Moreover, it enables more freedom in the exploitation of plasmonic hot spots with both transverse electric (TE) and transverse magnetic (TM) modes. Through real-time measurement, it is demonstrated that …

Study Of The Energetic Field Characteristics Of The Te-Modalwaves In Waveguides, Fati̇h Erden

Turkish Journal of Physics

The energetic characteristics of cylindrical medium-free time-domain waveguide fields are solved within the framework of the evolutionary approach to electromagnetics. Solving the boundary-eigenvalue problem for transverse Laplacian yields a configurational basis in the waveguide cross section. Elements of the basis depend on transverse coordinates, whereas the modal amplitudes depend on the longitudinal coordinate, $z,$ and time, $t$. Solving the resulted Klein-Gordon equation yields a basis for analysis of the modal amplitudes. Exact solutions for the amplitudes of TE-modes are obtained, and the energetic field characteristics are derived in accordance with the causality principle.

Multi-Mode And Single Mode Polymer Waveguides And Structures For Short-Haul Optical Interconnects, Kevin L. Kruse

Dissertations, Master's Theses and Master's Reports - Open

Single mode and multi-mode polymer optical waveguides are a viable solution for replacing copper interconnects as high speed and large bandwidth short-haul optical interconnects in next-generation supercomputers and data servers. A precision laser direct writing method is implemented for producing various single mode and multi-mode polymer waveguide structures and their performance is evaluated experimentally showing agreement with theoretically developed models. The laser direct writing method is the optimal solution for low-rate cost-effective prototyping and large area panel production.

A single mode polymer waveguide bridge module for silicon to glass optical fibers is designed, modeled, fabricated, and measured. The bridge module …

Geometry Induced Magneto-Optic Effects In Lpe Grown Magnetic Garnet Films, Ashim Chakravarty

Dissertations, Master's Theses and Master's Reports - Open

This dissertation addresses dimensionality-induced magneto-optic effects in liquid-phaseepitaxy magnetic garnet thin films. It is found that the Faraday rotation (FR) per unit length evinces a marked and steady enhancement as the film thickness is reduced below ~100 nm in Bi_0.8Gd_0.2Lu₂Fe₅O₁₂, although it remains constant in the micron- and most of the submicron- regime. The reported specific FR change in such reduced dimensions is due to sizedependent modifications in diamagnetic transition processes in the garnet film. These processes correspond to the electronic transitions from the singlet ⁶S ground state to …

Planar Waveguide Structures For Post-Edfa Broadband Near Infrared Optical Amplifiers, Islam Hoxha

Dissertations, Theses, and Capstone Projects

This thesis reports on optical gain of up to 5.7 dB from a planar waveguide with core made of tetravalent chromium-doped calcium germanate single crystal.

Light Trapping For Silicon Solar Cells: Theory And Experiment, Hui Zhao

Physics - Dissertations

Crystalline silicon solar cells have been the mainstream technology for photovoltaic energy conversion since their invention in 1954. Since silicon is an indirect band gap material, its absorption coefficient is low for much of the solar spectrum, and the highest conversion efficiencies are achieved only in cells that are thicker than about 0.1 mm. Light trapping by total internal reflection is important to increase the optical absorption in silicon layers, and becomes increasingly important as the layers are thinned. Light trapping is typically characterized by the enhancement of the absorptance of a solar cell beyond the value for a single …

Direct Write Fabrication Of Waveguides And Interconnects For Optical Printed Wiring Boards, Joseph Carl Dingeldein

Dissertations, Master's Theses and Master's Reports - Open

Current copper based circuit technology is becoming a limiting factor in high speed data transfer applications as processors are improving at a faster rate than are developments to increase on board data transfer. One solution is to utilize optical waveguide technology to overcome these bandwidth and loss restrictions. The use of this technology virtually eliminates the heat and cross-talk loss seen in copper circuitry, while also operating at a higher bandwidth. Transitioning current fabrication techniques from small scale laboratory environments to large scale manufacturing presents significant challenges. Optical-to-electrical connections and out-of-plane coupling are significant hurdles in the advancement of optical …

Towards Direct Writing Of 3-D Photonic Circuits Using Ultrafast Lasers, Arnaud Zoubir

Electronic Theses and Dissertations

The advent of ultrafast lasers has enabled micromachining schemes that cannot be achieved by other current techniques. Laser direct writing has emerged as one of the possible routes for fabrication of optical waveguides in transparent materials. In this thesis, the advantages and limitations of this technique are explored. Two extended-cavity ultrafast lasers were built and characterized as the laser sources for this study, with improved performance over existing systems. Waveguides are fabricated in oxide glass, chalcogenide glass, and polymers, these being the three major classes of materials for the telecommunication industry. Standard waveguide metrology is performed on the fabricated waveguides, …