Open Access. Powered by Scholars. Published by Universities.®

Physics Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 26 of 26

Full-Text Articles in Physics

Impact Of Alkaline Doping And Reducing Conditions On Lafeo3, Geoffrey L. Beausoleil Ii Dec 2013

Impact Of Alkaline Doping And Reducing Conditions On Lafeo3, Geoffrey L. Beausoleil Ii

Geoffrey L Beausoleil II

Efficient and reliable materials for gas separation, syngas production, and hybrid nuclear power plants must be capable of reliably operating at a high-temperature range of 700-1000°C and under exposure to highly oxidizing and reducing conditions. Candidate materials for these applications include alkaline metal doped lanthanum ferrite.

In the first study, the impact of A site substitution by different alkaline metals on lanthanum ferrite (LMF, M=Ca, Sr, and Ba) was investigated. The study focused on thermal expansion near the Néel transition temperature and a magneto-elastic contribution to thermal expansion was identified for each sample. Iron oxidation, Fe3+ to Fe4+, was identified …


Reflectance Anisotropy Of Gd5si2ge2 And Tb5si2.2ge1.8, S. J. Lee, Joong Mok Park, J. E. Snyder, David C. Jiles, Deborah L. Schlagel, Thomas A. Lograsso, A. O. Pecharsky, David W. Lynch Oct 2013

Reflectance Anisotropy Of Gd5si2ge2 And Tb5si2.2ge1.8, S. J. Lee, Joong Mok Park, J. E. Snyder, David C. Jiles, Deborah L. Schlagel, Thomas A. Lograsso, A. O. Pecharsky, David W. Lynch

Professor David Lynch

Reflectance difference (RD) spectra for the a–b plane of the single crystals of Gd5Si2Ge2and b–c planes of Gd5Si2Ge2 and Tb5Si2.2Ge1.8 were obtained in the photon energy range of 1.5–5.5 eV. Several peaks were observed for these crystals in the measured spectrum range. Similar features were observed in the RD spectra for the b–c planes ofGd5Si2Ge2 and Tb5Si2.2Ge1.8, while different features were observed for the a–b plane and b–c plane of Gd5Si2Ge2. The RD spectra for the crystals arise not only from the surface anisotropy but also from the bulk anisotropy due to the monoclinic structure of the bulk crystal.


Evaluation Of Thermal Radiation Effects On Apparent Propagation Rates Of High Pressure Spherical Flames, Jeffrey S. Santner, Francis M. Haas, Yiguang Ju, Frederick L. Dryer Sep 2013

Evaluation Of Thermal Radiation Effects On Apparent Propagation Rates Of High Pressure Spherical Flames, Jeffrey S. Santner, Francis M. Haas, Yiguang Ju, Frederick L. Dryer

Francis (Mac) Haas

Thermal radiation is usually not considered in the interpretation of laminar burning rates measured by the outwardly propagating spherical flame method. However, it may contribute significantly to measurement uncertainty, especially for model-constraining conditions at lower flame temperatures and higher pressures. The present work derives a conservative analytical estimate of the effects of radiation heat loss, which include radiation-induced burned gas motion, decreasing flame temperature due to conduction to the radiating burned gas, and radiation loss from the flame zone. Detailed numerical simulations covering a range of burning conditions serve to validate this analytical tool. Modeling results from both detailed simulation …


Novel Nanostructured Rare-Earth-Free Magnetic Materials With High Energy Products, Bhaskar Das Aug 2013

Novel Nanostructured Rare-Earth-Free Magnetic Materials With High Energy Products, Bhaskar Das

B. Das

Novel nanostructured Zr2Co11-based magnetic materials are fabricated in a single step process using cluster-deposition method. The composition, atomic ordering, and spin structure are precisely controlled to achieve a substantial magnetic remanence and coercivity, as well as the highest energy product for non-rare-earth and Pt-free permanent-magnet alloys.


Computational Design Optimization For Microfluidic Magnetophoresis, Brian Dennis Plouffe, Laura H. Lewis, Shashi Krishna Murthy Aug 2013

Computational Design Optimization For Microfluidic Magnetophoresis, Brian Dennis Plouffe, Laura H. Lewis, Shashi Krishna Murthy

Laura H. Lewis

Current macro- and microfluidic approaches for the isolation of mammalian cells are limited in both efficiency and purity. In order to design a robust platform for the enumeration of a target cell population, high collection efficiencies are required. Additionally, the ability to isolate pure populations with minimal biological perturbation and efficient off-chip recovery will enable subcellular analyses of these cells for applications in personalized medicine. Here, a rational design approach for a simple and efficient device that isolates target cell populations via magnetic tagging is presented. In this work, two magnetophoretic microfluidic device designs are described, with optimized dimensions and …


Computational Design Optimization For Microfluidic Magnetophoresis, Brian Plouffe, Laura Lewis, Shashi Murthy Jul 2013

Computational Design Optimization For Microfluidic Magnetophoresis, Brian Plouffe, Laura Lewis, Shashi Murthy

Shashi K. Murthy

Current macro- and microfluidic approaches for the isolation of mammalian cells are limited in both efficiency and purity. In order to design a robust platform for the enumeration of a target cell population, high collection efficiencies are required. Additionally, the ability to isolate pure populations with minimal biological perturbation and efficient off-chip recovery will enable subcellular analyses of these cells for applications in personalized medicine. Here, a rational design approach for a simple and efficient device that isolates target cell populations via magnetic tagging is presented. In this work, two magnetophoretic microfluidic device designs are described, with optimized dimensions and …


Hfco7-Based Rare-Earth-Free Permanent-Magnet Alloys, Bhaskar Das Jun 2013

Hfco7-Based Rare-Earth-Free Permanent-Magnet Alloys, Bhaskar Das

B. Das

This study presents the structural and magnetic properties of melt-spun HfCo7,HfCo7-xFex (0.25 ≤ × ≤ 1) and HfCo7Six(0.2 ≤ × ≤1.2) alloys. Appreciable permanent-magnet properties with a magnetocrystalline anisotropy of about 9.6-16.5 Mergs/cm3, a magnetic polarization Js ≈ 7.2-10.6 kG, and coercivities Hc = 0.5-3.0 kOe were obtained by varying the composition of these alloys. Structural analysis reveals that the positions of x-ray diffraction peaks of HfCo7 show good agreement with those corresponding to an orthorhombic structure having lattice parameters of about α = 4.719 Å, b = 4.278 Å, and c = 8.070 Å. Based on these results, a …


Creating Low-Cost ‘Balloonsats’ For Stem Education With 3d Printing, Jeremy Straub May 2013

Creating Low-Cost ‘Balloonsats’ For Stem Education With 3d Printing, Jeremy Straub

Jeremy Straub

A new technology, known as 3D printing, allows the rapid fabrication of plastic structures of virtually any configuration. These structures are light-weight, durable and inexpensive. This paper considers the utility of utilizing 3D printing to create enclosures for ‘BalloonSats’ – small, low-cost spacecraft analog which can be utilized by students to understand space engineering, conduct near-space science (e.g., physics, biological and other experiments) and touch the edge of space.

The utility of 3D printed structures for use in the near-space low-temperature and low-pressure environment is considered. This analysis falls into four key areas. First, the ability of the structures to …


Distortion Management In Slow-Light Pulse Delay, Michael D. Stenner, Mark A. Neifeld, Zhaoming Zhu, Andrew M.C. Dawes, Daniel J. Gauthier May 2013

Distortion Management In Slow-Light Pulse Delay, Michael D. Stenner, Mark A. Neifeld, Zhaoming Zhu, Andrew M.C. Dawes, Daniel J. Gauthier

Andrew M C Dawes

We describe a methodology to maximize slow-light pulse delay subject to a constraint on the allowable pulse distortion. We show that optimizing over a larger number of physical variables can increase the distortion-constrained delay. We demonstrate these concepts by comparing the optimum slow-light pulse delay achievable using a single Lorentzian gain line with that achievable using a pair of closely-spaced gain lines. We predict that distortion management using a gain doublet can provide approximately a factor of 2 increase in slow-light pulse delay as compared with the optimum single-line delay. Experimental results employing Brillouin gain in optical fiber confirm our …


Modeling Complex Properties Of Ferroelectric Nanocomposites, Raymond T. Walter Apr 2013

Modeling Complex Properties Of Ferroelectric Nanocomposites, Raymond T. Walter

Raymond Walter

No abstract provided.


Wireless Transmission Network : A Imagine, Radhey Shyam Meena Engineer, Neeraj Kumar Garg Asst.Prof Apr 2013

Wireless Transmission Network : A Imagine, Radhey Shyam Meena Engineer, Neeraj Kumar Garg Asst.Prof

Radhey Shyam Meena

World cannot be imagined without electrical power. Generally the power is transmitted through transmission networks. This paper describes an original idea to eradicate the hazardous usage of electrical wires which involve lot of confusion in particularly organizing them. Imagine a future in which wireless power transfer is feasible: cell phones, household robots, mp3 players, laptop computers and other portable electronic devices capable of charging themselves without ever being plugged in freeing us from that final ubiquitous power wire. This paper includes the techniques of transmitting power without using wires with an efficiency of about 95% with non-radioactivemethods. In this paper …


Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er., Deepa Sharma Mar 2013

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er., Deepa Sharma

Radhey Shyam Meena

Grid-connected solar PV dramatically changes the load profile of an electric utility customer. The expected widespread adoption of solar generation by customers on the distribution system poses significant challenges to system operators both in transient and steady state operation, from issues including voltage swings, sudden weather-induced changes in generation, and legacy protective devices designed with one-way power flow in mind


Bulk Heterojunction Photodiode: To Detect The Whole Visible Spectrum, Shahino Mah Abdullah Feb 2013

Bulk Heterojunction Photodiode: To Detect The Whole Visible Spectrum, Shahino Mah Abdullah

Shahino Mah Abdullah

In this paper, we report an organic bulk heterojunction photo-sensor that has been fabricated by using a composite of a polymer material poly(3-hexylthiophene-2,5-diyl) (P3HT) and a dye material vanadyl-phthalocyanine (VOPcPhO). The UV–Vis spectrum shows that this composite exhibits a broad absorption over the whole visible range. The photoluminescence (PL) spectra of P3HT and VOPcPhO blend have been studied to optimize the ratio of P3HT and VOPcPhO. The photo-sensitivity has been investigated under different applied voltages in reverse direction. The photoconductivity sensitivity value has been calculated as 5.65 × 102 Sm/W. The photo-responsivity of the sensor has been investigated under 100 …


Measurements Of Nh3 Linestrengths And Collisional Broadening Coefficients In N2, O2, Co2, And H2o Near 1103.46 Cm−1, Kyle Owen, Et-Touhami Es-Sebbar, Aamir Farooq Feb 2013

Measurements Of Nh3 Linestrengths And Collisional Broadening Coefficients In N2, O2, Co2, And H2o Near 1103.46 Cm−1, Kyle Owen, Et-Touhami Es-Sebbar, Aamir Farooq

Dr. Et-touhami Es-sebbar

Laser-based ammonia gas sensors have useful applications in many fields including combustion, atmospheric monitoring, and medical diagnostics. Calibration-free trace gas sensors require the spectroscopic parameters including linestrengths and collisional broadening coefficients to be known. Ammonia's strong ν2 vibrational band between View the MathML source has the high absorption strength needed for sensing small concentrations. Within this band, the 1103.46 cm−1 feature is one of the strongest and has minimal interference from CO2 and H2O. However, the six rotational transitions that make up this feature have not been studied previously with absorption spectroscopy due to their small line spacing ranging from …


The International Trafficking In Arms Regulations: Precluding Innovation In Academic Spacecraft Engineering — Or Are They?, Jeremy Straub, Joe Vacek Feb 2013

The International Trafficking In Arms Regulations: Precluding Innovation In Academic Spacecraft Engineering — Or Are They?, Jeremy Straub, Joe Vacek

Jeremy Straub

Government regulations and uncertainty about their enforcement can be a significant barrier to innovation. In business, it is undesirable to consume time and other resources developing a product that cannot be sold or which requires navigating significant bureaucracy for each sale. In academ-ia, where limited funding is available prior to the submission of a grant pro-posal and receipt of an award, proposal-stage compliance costs can derail a project long before it begins. This paper reviews the International Traffick-ing in Arms Regulations (ITAR) and their impact on spacecraft research in academia, private research labs and industry. It reviews the exemptions available, …


Organic Semiconductors: Applications In Solar Photovoltaic And Sensor Devices, Shahino Mah Abdullah Jan 2013

Organic Semiconductors: Applications In Solar Photovoltaic And Sensor Devices, Shahino Mah Abdullah

Shahino Mah Abdullah

Organic semiconductor-based solar photovoltaic cells and sensors are scalable, printable, solution processable, bendable and light-weight. Furthermore, organic semiconductors require low energy fabrication process, hence can be fabricated at low cost as light-weight solar cells and sensors, coupled with the ease of processing, as well as compatibility, with flexible substrates. Organic semiconductors have been identified as a fascinating class of novel semiconductors that have the electrical and optical properties of metals and semiconductors. The continuous demand to improve the properties of organic semiconductors raises the quest for a deep understanding of fundamental issues and relevant electronic processes. Organic semiconductor thin film …


Effects Of N2o And O2 Addition To Nitrogen Townsend Dielectric Barrier Discharges At Atmospheric Pressure On The Absolute Ground-State Atomic Nitrogen Density, Et. Es-Sebbar, N. Gherardi, F. Massines Jan 2013

Effects Of N2o And O2 Addition To Nitrogen Townsend Dielectric Barrier Discharges At Atmospheric Pressure On The Absolute Ground-State Atomic Nitrogen Density, Et. Es-Sebbar, N. Gherardi, F. Massines

Dr. Et-touhami Es-sebbar

Absolute ground-state density of nitrogen atoms N (2p3 4S3/2) in non-equilibrium Townsend dielectric barrier discharges (TDBDs) at atmospheric pressure sustained in N2/N2O and N2/O2 gas mixtures has been measured using Two-photon absorption laser-induced fluorescence (TALIF) spectroscopy. The quantitative measurements have been obtained by TALIF calibration using krypton as a reference gas. We previously reported that the maximum of N (2p3 4S3/2) atom density is around 3 × 1014 cm−3 in pure nitrogen TDBD, and that this maximum depends strongly on the mean energy dissipated in the gas. In the two gas mixtures studied here, results show that the absolute N …


Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er. Jan 2013

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er.

Radhey Shyam Meena

As solar photovoltaic power generation becomes more commonplace, the inherent intermittency of the solar resource poses one of the great challenges to those who would design and implement the next generation smart grid. Specifically, grid-tied solar power generation is a distributed resource whose output can change extremely rapidly, resulting in many issues for the distribution system operator with a large quantity of installed photovoltaic devices. Battery energy storage systems are increasingly being used to help integrate solar power into the grid. These systems are capable of absorbing and delivering both real and reactive power with sub-second response times. With these …


Determining Planck's Constant Using Leds, Zechariah Thurman Jan 2013

Determining Planck's Constant Using Leds, Zechariah Thurman

Zechariah Thurman

In this paper a value for Planck's constant is measured. The value found with this experiment is within two sigma of the accepted value, this constitutes reasonable agreement with theory for the purposes of this experiment.


Microfabricated Nanotopological Surfaces For Study Of Adhesion-Dependent Cell Mechanosensitivity, Weiqiang Chen, Yubing Sun, Jianping Fu Jan 2013

Microfabricated Nanotopological Surfaces For Study Of Adhesion-Dependent Cell Mechanosensitivity, Weiqiang Chen, Yubing Sun, Jianping Fu

Weiqiang Chen

Cells exhibit high sensitivity and diverse responses to the intrinsic nanotopography of the extracellular matrix through their nanoscale cellular sensing machinery. A simple microfabrication method for precise control and spatial patterning of the local nanoroughness on glass surfaces by using photolithography and reactive ion etching is reported. It is demonstrated that local nanoroughness as a biophysical cue could regulate a diverse array of NIH/3T3 fi broblast behaviors, including cell morphology, adhesion, proliferation, migration, and cytoskeleton contractility. The capability to control and further predict cellular responses to nanoroughness might suggest novel methods for developing biomaterials mimicking nanotopographic structures in vivo for …


Surface-Micromachined Microfiltration Membranes For Efficient Isolation And Functional Immunophenotyping Of Subpopulations Of Immune Cells, Weiqiang Chen, Nien-Tsu Huang, Boram Oh, Raymond H. W. Lam, Rong Fan, Timothy T. Cornell, Thomas P. Shanley, Katsuo Kurabayashi, Jianping Fu Jan 2013

Surface-Micromachined Microfiltration Membranes For Efficient Isolation And Functional Immunophenotyping Of Subpopulations Of Immune Cells, Weiqiang Chen, Nien-Tsu Huang, Boram Oh, Raymond H. W. Lam, Rong Fan, Timothy T. Cornell, Thomas P. Shanley, Katsuo Kurabayashi, Jianping Fu

Weiqiang Chen

An accurate measurement of the immune status in patients with immune system disorders is critical in evaluating the stage of diseases and tailoring drug treatments. The functional cellular immunity test is a promising method to establish the diagnosis of immune dysfunctions. The conventional functional cellular immunity test involves measurements of the capacity of peripheral blood mononuclear cells to produce pro-inflammatory cytokines when stimulated ex vivo. However, this “bulk” assay measures the overall reactivity of a population of lymphocytes and monocytes, making it difficult to pinpoint the phenotype or real identity of the reactive immune cells involved. In this research, we …


Mechaniczny Rozdział Faz Proj., Wojciech M. Budzianowski Jan 2013

Mechaniczny Rozdział Faz Proj., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.


Challenges And Prospects Of Processes Utilising Carbonic Anhydrase For Co2 Separation, Patrycja Szeligiewicz, Wojciech M. Budzianowski Jan 2013

Challenges And Prospects Of Processes Utilising Carbonic Anhydrase For Co2 Separation, Patrycja Szeligiewicz, Wojciech M. Budzianowski

Wojciech Budzianowski

This article provides an analysis of processes for separation CO2 by using carbonic anhydrase enzyme with particular emphasis on reactive-membrane solutions. Three available processes are characterised. Main challenges and prospects are given. It is found that in view of numerous challenges practical applications of these processes will be difficult in near future. Further research is therefore needed for improving existing processes through finding methods for eliminating their main drawbacks such as short lifetime of carbonic anhydrase or low resistance of reactive membrane systems to impurities contained in flue gases from power plants.


Tuning Of Magnetization In Vertical Graphenes By Plasma-Enabled Chemical Conversion Of Organic Precursors With Different Oxygen Content, Zengji Yue Dec 2012

Tuning Of Magnetization In Vertical Graphenes By Plasma-Enabled Chemical Conversion Of Organic Precursors With Different Oxygen Content, Zengji Yue

Zengji Yue

Different magnetization in vertical graphenes fabricated by plasma-enabled chemical conversion of organic precursors with various oxygen atom contents and bonding energies was achieved. The graphenes grown from fat-like precursors exhibit magnetization up to 8 emu g−1, whereas the use of sugar-containing precursors results in much lower numbers. A relatively high Curie temperature exceeding 600 K was also demonstrated.


Determination Of Kinetic Parameters From The Thermogravimetric Data Set Of Biomass Samples, Karol Postawa, Wojciech M. Budzianowski Dec 2012

Determination Of Kinetic Parameters From The Thermogravimetric Data Set Of Biomass Samples, Karol Postawa, Wojciech M. Budzianowski

Wojciech Budzianowski

This article describes methods of the determination of kinetic parameters from the thermogravimetric data set of biomass samples. It presents the methodology of the research, description of the needed equipment, and the method of analysis of thermogravimetric data. It describes both methodology of obtaining quantitative data such as kinetic parameters as well as of obtaining qualitative data like the composition of biomass. The study is focused mainly on plant biomass because it is easy in harvesting and preparation. Methodology is shown on the sample containing corn stover which is subsequently pyrolysed. The investigated sample show the kinetic of first order …


Temperature-Dependent Absorption Cross-Section Measurements Of 1-Butene (1-C4h8) In Vuv And Ir, Et-Touhami Es-Sebbar, Yves Benilan, Aamir Farooq Dec 2012

Temperature-Dependent Absorption Cross-Section Measurements Of 1-Butene (1-C4h8) In Vuv And Ir, Et-Touhami Es-Sebbar, Yves Benilan, Aamir Farooq

Dr. Et-touhami Es-sebbar

Vacuum ultraviolet (VUV) and infrared (IR) absorption cross-section measurements of 1-butene (1-C4H8; CH2=CHCH2CH3; Butylene) are reported over the temperature range of 296–529 K. The VUV measurements are performed between 115 and 205 nm using synchrotron radiation as a tunable VUV light source. Fourier Transform Infrared (FTIR) spectroscopy is employed to measure absorption cross-section and band strengths in the IR region between 1.54 and 25 μm (∼6500–400 cm−1). The measured room-temperature VUV and IR absorption cross-sections are compared with available literature data and are found to be in good agreement. The oscillator strength for the electronic transition (A1A′→X1A′) around 150–205 nm …