Oil, Gas, and Energy Commons^™

Lectio Praecursoria, Kari Myöhänen

Kari Myöhänen

Lectio praecursoria: Modelling of combustion and sorbent reactions in three-dimensional flow environment of a circulating fluidized bed furnace

Modeling Passive Solar Distillation Production In Las Vegas, Nevada, Noe I. Santos

UNLV Theses, Dissertations, Professional Papers, and Capstones

A study has been performed to examine the effects of daily weather on the performance of commercial solar distillation basins (solar stills). The objectives of this study were to evaluate the long term performance of solar stills, to instrument two solar stills and record sub-hourly thermal properties, to evaluate existing heat transfer modeling methods for hourly production, and to create new models to predict daily production using experimental distillate production and local weather data by utilizing artificial neural networks, genetic algorithms, and multivariate regression. A system dynamics model was also created to determine the required basin area and storage volume …

Synthesis And Characterization Of Catalysts For The Selective Transformation Of Biomass-Derived Materials, Isaac Tyrone Ghampson

Electronic Theses and Dissertations

The experimental work in this thesis focuses on generating catalysts for two intermediate processes related to the thermal conversion of lignocellulosic biomass: the synthesis and characterization of mesoporous silica supported cobalt catalysts for the Fischer-Tropsch reaction, and an exploration of the reactivity of bulk and supported molybdenum-based nitride catalysts for the hydrodeoxygenation (HDO) of guaiacol, a lignin model compound. The first section of the work details the synthesis of a series of silicasupported cobalt Fischer-Tropsch catalysts with pore diameters ranging from 2-23 nm. Detailed X-ray diffraction measurements were used to determine the composition and particle diameters of the metal fraction, …

Energy-Based Analysis Of Utility Scale Hybrid Power Systems, Kwame Agyenim-Boateng

UNLV Theses, Dissertations, Professional Papers, and Capstones

The promise of large-scale use of renewables such as wind and solar for supplying electrical power is tempered by the sources' transient behavior and the impact this would have on the operation of the grid. Among the methods cited for addressing some of those concerns are exploring the complementary nature of solar and wind power generation, and through the use of supplemental energy storage. While the technology for the latter has not been proven to be economical on a large scale at the present time, some assessments of what magnitude is required can be made. An energy-based analysis of utility …

Direct Contact Pyrolysis Of Hydrocarbons: A Source Of Hydrogen And Interesting Carbon Formations, Peter G. Faught

UNLV Theses, Dissertations, Professional Papers, and Capstones

The work detailed in this document looks at a novel liquid metal supported catalytic system for the generation of hydrogen by decomposition of ethanol through direct contact pyrolysis. The hydrogen is produced at relatively low temperatures (500-600°C) and has carbon and water as co-products. It should be noted that CO is not observed as a product at these low temperatures. This is to be contrasted with the hydrogen produced at higher temperature from ethanol which does contain carbon monoxide. The presence of carbon monoxide in hydrogen complicates fuel cell operation and catalytic chemical processes. Thus, the lack of CO in …

Modeling Of A Novel Solar Down Beam Test Facility Utilizing Newtonian Optics, Ryan J. Hoffmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

As advances in concentrated solar energy progress there will inevitably be an increase in the demand of resources for testing new conceptions. Currently, there are limited facilities available for taking concentrated solar energy concepts from the laboratory bench scale to the engineering test scale. A proposed solution is a scientific and developmental facility that provides highly concentrated solar energy at ground level. The design presented is a solar down beam test facility utilizing a Newtonian optics approach with a flat rectangular down beam mirror to reflect and concentrate the sun's rays at ground level.

Literature review suggests a hyperbolic reflector …

Wind Charged Plug-In Hybrid Electric Vehicle, John Patten, Nathan Christensen, Steven Srivastava, Gary Nola

john a patten

With the emergence of electric vehicles (EVs), hybrid vehicles HVs) and plug-in hybrid electric vehicles (PHEVs) from a variety of automotive manufacturers, the electrical grid will need to meet new challenges in supplying the electricity required to charge these vehicles. To help supply the electricity needed by these vehicles, we compared the electricity consumption of a modified Toyota Prius (PHEV) and the output of a small residential wind turbine over the course of one year. Our research seeks to determine whether a small residential wind turbine can supply the necessary electricity demanded by the PHEV annually.

The Impact Of Driving Conditions On Phev Battery Performance, Nathan Christensen, John Patten, Steven Srivastava, Gary P. Nola

john a patten

The battery performance of a modified Prius with a 5 kWh plug-in battery was documented for a year to determine the impact of environmental conditions and user attributes on vehicle performance. Both fuel economy and pure electrical efficiency were compared to ambient temperature. The fuel economy has a positive relationship with ambient temperature until approximately 70˚F where the efficiency begins to drop. Electrical performance has a positive linear relationship with ambient temperature. With the emergence of electric vehicles (EVs) and PHEVs from a variety of automotive manufacturers, information on EV and PHEV performance for consumers will become more important.

Produkcja Stałego Paliwa Wtórnego Na Przykładzie Przedsiębiorstwa Usług Komunalnych „Empol” Sp. Z O.O. / Production Of Solid Waste-Derived Fuel - A Case Study Of The Enterprise Of Municipal Services "Empol" Llc, Robert Oleniacz, Leszek Rataj, Monika Wyrostek

Robert Oleniacz

The work presents activities of the Enterprise of Municipal Services "Empol" Sp. z o.o. based in Tylmanowa (Małopolska Province, Poland) and the interrelated technological lines for sorting of waste and production of alternative fuels (refuse derived fuels - RDFs) started in 2009 in the Special Economic Zone in Gorlice. The paper also discusses properties of the produced RDFs and their typical applications.

Overview Of Corn-Based Fuel Ethanol Coproducts: Production And Use, Kurt A. Rosentrater

Kurt A. Rosentrater

Modern societies face many challenges, including growing populations, increased demands for food, clothing, housing, consumer goods, and the raw materials required to produce all of these. Additionally, there is a growing need for energy, which is most easily met by use of fossil fuels (e.g., coal, natural gas, petroleum). For example, in 2008, the overall U.S. demand for energy was 99.3 x 1015 Btu (1.05 x 1014 MJ); 84% of this was supplied by fossil sources. Transportation fuels accounted for 28% of all energy consumed during this time, and nearly 97% of this came from fossil sources. Domestic production of …

Time-Dependent Crack Growth Behavior Of Alloy 617 And Alloy 230 At Elevated Temperatures, Shawoon Kumar Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two Ni-base solid-solution-strengthened superalloys: INCONEL 617 and HAYNES 230 were studied to check sustained loading crack growth (SLCG) behavior at elevated temperatures appropriate for Next Generation Nuclear Plant (NGNP) applictaions with constant stress intensity factor (K _max = 27.75 MPa[checkmark]m) in air. The results indicate a time-dependent rate controlling process which can be characterized by a linear elastic fracture mechanics (LEFM) parameter - stress intensity factor (K). At elevated temperatures, the crack growth mechanism was best described using a damage zone concept. Based on results and study, SAGBOE (stress accelerated grain boundary oxidation embrittlement) is considered the primary reason for …

Do Wind Turbines Affect Weather Conditions?: A Case Study In Indiana, Meghan F. Henschen, Brittany Herrholtz, Lacey Rhudy, Kathryn Demchak, Brian Doogs, Joshua Holland, Erik Larson, Johnny Martin, Matthew Rudkin

The Journal of Purdue Undergraduate Research

Wind turbines are becoming increasingly widespread in the United States as the world looks for cleaner sources of energy. Scientists, policymakers, and citizens have strong opinions regarding the positive and negative effects of wind energy projects, and there is a great deal of misinformation about wind energy circulating on the Web and other media sources. The purpose of this study is to gain a better understanding of how the rotation of hundreds of turbines can influence local weather conditions within a wind farm and in the surrounding areas. This experiment measures temperature, atmospheric pressure, wind speed, wind direction, relative humidity, …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Modelling Of The Adsorption‐Catalytic Processes In The Multi‐Dispersed Bed, Sergey V. Zazhigalov, Natali A. Chumakova, Andrey N. Zagoruiko

Andrey N Zagoruiko

The simulation work is dedicated to the multidispersed adsorption-catalytic packing, consisting of comparatively large pellets (say, 5-10 mm) of the catalyst-adsorbent and of catalytically active micro-fibers with typical thickness of ~10 microns. During the heating at the regeneration stage the micro-fiber catalyst must be heated much more rapidly than adsorbent-catalyst, due to the much higher unit outer surface area improving the heat exchange. When the adsorbent-catalyst temperature is becoming high enough for partial desorption of chemisorbed VOC, the temperature of the micro-fibrous catalyst will be already as high as necessary one for complete oxidation of desorbed VOCs. This theoretical concept …

Process Of Combined Oxidation Of Co And So2 In Waste Gases Of Non‐Ferrous Smelters At Platinum Glass‐Fiber Catalyst, Sergey V. Vanag, Andrey N. Zagoruiko

Andrey N Zagoruiko

The work is dedicated to the development of the efficient catalyst for the oxidation of CO in presence of significant amounts of SO2. It was experimentally shown that the Pt/Zr-Si glas-fiber-based catalyst is capable to provide complete CO conversion in SO2 presence at temperatures less 300 С, at the same time showing high resistance to deactivation. Application of such catalyst in the reverse-process will allow to raise essentially efficiency of purification of waste metallurgical gases from SO2 under presence of significant amounts (up to 1-2% vol.) of CO.

New Developments In The Area Of Nonstationary And Sorption-Enhanced Catalytic Processes, Andrey N. Zagoruiko

Andrey N Zagoruiko

The presentation is dedicated to catalytic processes performed under artificially created catalyst nonstationarity. It is shown that the highest technological effect can be achieved for a controlled combination of the thermal nonstationarity with the composition nonstationarity of the catalyst surface. Prospective for application of unsteady catalytic and sorption-catalytic processes are analyzed for different case applications: VOC incineration, hydrogen production by steam conversion of hydrocarbons and organic feedsctock, selective anaerobic oxidation of hydrocarbons. In general, unsteady state and sorption-catalytic ideology discovers new degrees of freedom for process development and may become the basement for new generation of highly-efficient catalytic technologies in …

Slides: Collaborative Planning And Lessons Learned, Matt Sura

Best Management Practices (BMPs): What? How? And Why? (May 26)

Presenter: Matt Sura, University of Colorado Law School

48 slides

Slides: The Costs And Benefits Of Best Management Practices: Insights From The Marcellus Shale, Timothy J. Considine

Best Management Practices (BMPs): What? How? And Why? (May 26)

Presenter: Timothy J. Considine, School of Energy Resources, Department of Economics and Finance, University of Wyoming

15 slides

Computational Study Of Passive Neutron Albedo Reactivity (Pnar) Measurement With Fission Chambers, Sandra De La Cruz

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Passive Neutron Albedo Reactivity technique (PNAR) was used to assay used nuclear fuel as a potential method for the measurement of fissionable material in fuel assemblies. A Monte Carlo transport code (MCNPX 2.6) was used to develop simulation models to evaluate the PNAR technique. The MCNPX simulated models consisted of two 17x17 Pressurized Water Reactor (PWR) used fuel assemblies; one with an initial 3 wt% uranium-235*, cooled for 20 years and second with an initial 4 wt% uranium-235*, cooled for 5 years. Each used fuel assembly was simulated at four different burn up rates of 15, 30, 45, and …

Thin-Film Fabrication For High Pressure Thermoelectric And Electrical Resistivity Studies, Jorge L. Reynaga, Rama Venkat, Ravhi S. Kumar

Festival of Communities: UG Symposium (Posters)

Thermoelectric materials are of interest for application such as thermoelectric cooler in microprocessors and power generators in cars. High pressure plays an important role in understanding the changes in the figure of merit of thermoelectric thin films. To study the thermoelectric thin films a direct approach is to fabricate the thin film on the surface of a diamond anvil, so that the pressure dependence of structure and transport properties can be investigated easily. If we could successfully fabricate the electrical probes by depositing thin films, then it reduces the use of electrical wires as probes inside the diamond cell, as …

Long Term Outdoor Testing Of Low Concentration Solar Modules, Lewis Fraas, James Avery, Leonid Minkin, H. X. Huang, Tim Hebrink, Robert F. Boehm

Mechanical Engineering Faculty Research

A 1‐axis carousel tracker equipped with four 3‐sun low‐concentration mirror modules has now been under test outdoors at the University of Nevada in Las Vegas (UNLV) for three years. There are three unique features associated with this unit. First, simple linear mirrors are used to reduce the amount of expensive single crystal silicon in order to potentially lower the module cost while potentially maintaining cell efficiencies over 20% and high module efficiency. Simple linear mirrors also allow the use of a single axis tracker. Second, the azimuth carousel tracker is also unique allowing trackers to be used on commercial building …

Keynote 2: The Alberta Oil Sands — Wrestling Bitumen Out Of The Wild North, David Rudolph

North American Energy Water Nexus Roundtable

Athabasca Oil Sand Reserve:

- Oil sands are contained within the Cretaceous McMurray Formation. (149,000 km2)

- 2.5 trillion barrels of extractable oil (~ 25 % of Canada Crude Oil Production)

- Surface mineable deposits cover 2,800 km2

- 450 billion L of process water used annually

- Currently over 130 km2 of tailings ponds (largest man-made structures in the world)

Panel Discussion Presentation: U.S. – Mexico Transboundary Perspectives, Martin J. Pasqualetti

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Mexico Transboundary Perspectives

Principal Question: What are the implications of the energy/ water nexus at the US/Mexico border?

1. Water Supply and Demand

2. Water Costs of Electricity

3. Virtual Water Transfers

4. Renewable Energy Resources

5. Solar/Water nexus at the US/Mexico Border

Panel Discussion Presentation: Canada-U.S. Transboundary Perspectives, David Rudolph

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspectives

Longest international border in the world: 8,890km, over 3,000km are water!

- Major transboundary river systems (Columbia, Red River)

- 1997 Red River Flood

- Strategies for future power and water needs

- Canadian resource-based economy

Panel Discussion Presentation: Regional Politics, International Dreams, Kathryn Furlong

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspective

The Main Idea:

What are the drivers of hydro-electric development? What are the influences of domestic politics? In what ways are they international?

Panel Discussion Presentation: Columbia River Treaty, Kelvin Ketchum

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspectives

Slide titles:

- Columbia River Treaty – the setting

- What does the Treaty Do?

- Social & Environmental Costs of the Treaty in Canada

- Treaty benefits and term

- Treaty priorities for water usage

- Example of Flood Control Curves

- Actual Treaty operations

- Supplemental operating agreements

- Treaty Implementation

- Reasons for Treaty Success

Event Program, University Of Nevada, Las Vegas

North American Energy Water Nexus Roundtable

The North American Energy-Water Nexus roundtable was held April 1, 2011, to promote the discussion of how energy and water issues converge in addressing international relations. The roundtable focused on water issues specific to the U.S.-Mexico and U.S.-Canada borders, including stakeholder-driven solutions for water policies and water technologies. The event was co-sponsored by the UNLV Urban Sustainability Initiative; Desert Research Institute; the Canadian Consulate of Los Angeles; and the government of Ontario, Canada.

Developing Criteria For Evaluating The Sustainability Of Emerging Energy, Kurt A. Rosentrater, Elif Kongar

Kurt A. Rosentrater

Over the last decade, the interest in and production of biofuels has grown rapidly. Renewable transportation fuels can be produced from a variety of substrates, using various processing strategies. Feedstock preference and factory scale are geographic dependent. However, it is important to understand the implications of deploying these types of systems on a large scale, both throughout the U.S. as well as globally. To assess the sustainability of various biofuel options, it is crucial to evaluate their performance according to a number of attributes. This has been done using Life Cycle Assessment (LCA). Even so, comparisons among biofuel options are …

Identification Of ‘Carbon Hot-Spots’ And Quantification 1 Of Ghg Intensities In The Biodiesel Supply Chain Using Hybrid Lca And Structural Path Analysis, Adolf Acquaye, Thomas Wiedmann, Kuishang Feng, Robert Crawford, John Barrett, Johan Kuylenstierna, Aidan Duffy, Lenny Koh, Simon Mcqueen-Mason

Articles

It is expected that biodiesel production in the EU will remain the dominant contributor as part of a 10% minimum binding target for biofuel in transportation fuel by 2020 within the 20% renewable energy target in the overall EU energy mix. Life cycle assessments (LCA) of biodiesel to evaluate its environmental impacts have, however, remained questionable, mainly because of the adoption of a traditional process analysis approach resulting in system boundary truncation and because of issues regarding the impacts of land use change and N2O emissions from fertiliser application. In this study, a hybrid LCA methodology is used to evaluate …

Embodied Emissions Abatement: A Policy Assessment Using Stochastic Analysis, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Policymakers traditionally focus on regulating operational energy use in buildings, ignoring other life cycle components such as embodied energy even though this may account for a significant portion of life cycle emissions. Data relating to embodied energy and emissions in buildings is limited. However, stochastic techniques can be used to estimate the distribution of such emissions from buildings. This helps policymakers identify which instruments are appropriate for achieving emissions reductions. A primary aim of this paper is to demonstrate this approach using a sample of apartment buildings in Ireland. A Monte-Carlo simulation suggests that the average probability distribution of embodied …