Geophysics and Seismology Commons^™

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

This dissertation details the development of a surface wave method (SWM) technique to generate deep shear wave velocity profiles (VS profiles), applying this technique at 24 sites across the Mississippi embayment and developing an approach to generate pseudo site signature consistent VS profiles from velocity functions and fundamental frequency. In the presented SWM technique, active and passive source surface wave measurements are inverted along with fundamental frequency to develop a site signature consistent VS profile. Multiple transformation methods, including MSPAC, HRFK and FK are used to resolve experimental dispersion data from surface wave measurements. SWM VS profile at the Central …

Structural Interpretation Of An Alkaline-Carbonatite Complex Using Gravity And Magnetic Methods At Magnet Cove, Arkansas, Chelsea Morgan Amaral

Graduate Theses and Dissertations

The Magnet Cove alkaline-carbonatite complex in the Ouachita Mountains of south-central Arkansas could be a valuable resource for rare earth elements, though it has not yet been thoroughly studied using geophysical methods, and existing geophysical models simplify its diverse nature. Prior to this study, the subsurface structure and extent of the Magnet Cove complex was poorly understood and, in general, the process of emplacement of alkaline carbonatite complexes worldwide is also not fully understood. The Magnet Cove complex hosts an extensive variety of rare rock types and mineral resources that contrast significantly to the sedimentary rocks into which they have …

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …

Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

Ambient noise data from 24 sites within the Mississippi Embayment were analyzed to estimate the fundamental frequency using the horizontal to vertical spectral ratio (HVSR) method. The fundamental frequency ranged from 0.17 to 3.43 Hz for the tested sites. At seventeen of the sites, a second higher frequency HVSR peak, which ranged from 0.617 Hz to 2.154 Hz, was observed in addition to the fundamental HVSR peak. The second peak frequency in the HVSR curve has been attributed by previous researchers as either an odd harmonic of the fundamental peak or a shallow impedance contrast from the Memphis sand layer …

Laboratory Resistivity Measurements For Soil Characterization, Behdad Mofarraj Kouchaki

Graduate Theses and Dissertations

Field based electrical resistivity measurements, such as electrical resistivity tomography (ERT) and capacitively coupled resistivity (CCR), are geophysical methods that offer a non-destructive and rapid means to collect continuous data. As such, ERT and CCR are becoming increasingly popular tools for geotechnical engineers; however, it is challenging to derive geotechnical information such as soil type, density, and water content from the data. A laboratory geophysical investigation was carried out to gain a better understanding of the parameters that affect the electrical resistivity of soils and devise a relationship between resistivity and soil type or classification. In this study, a soil …

Geophysical Assessment Of Kinion Lake Dam, Tim Allen Moody

Graduate Theses and Dissertations

Geophysical methods including Capacitively-Coupled Resistivity (CCR), Electrical Resistivity Tomography/Imaging (ERT/ERI), Multichannel Analysis of Surface Waves (MASW) with Love and Rayleigh waves and a Full-Waveform Inversion (FWI) were performed on Kinion Lake Dam, an earth-filled embankment dam that has historically experienced significant seepage and internal erosion issues. Surveys were completed along the crest and downstream toe of the dam. Results from the surveys indicate that each method is capable of resolving the bedrock depth within 1-2 m of locations shown on previous drilling logs, though some discrepancies between the methods exist. A weathered bedrock layer is believed to have led to …

Near Surface Geophysics For Lithostratigraphic Interpretation At Pedro, Benton County, Arkansas, Matthew David Ruggeri

Graduate Theses and Dissertations

The roadcut on highway 412 near Pedro, Benton County, Arkansas (MArkUP site L15), has been of geological interest since its excavation in the 1980s. The roadcut is located within the Springfield Plateau and displays formations of Lower Mississippian age. The roadcut contains three mound-like features believed to be olistoliths. This thesis research work adds geophysical evidence to the geological exposure at the site. The purpose of this research is to answer the question of whether near surface seismic methods can be used to extend information at the Pedro outcrop below the ground surface. Specifically, can the top of the Middle …

Analysis Of Paleokarst Sinkholes In The Arkoma Basin Using 3-D Seismic, Michael Kumbalek

Graduate Theses and Dissertations

Paleokarst features are important to understand, both with regards to research geologists and to the petroleum industry. In terms of geology, understanding paleokarst features can yield more information about the depositional and surface environments of past times, and how diagenetic alteration affected the environment during the formation of karst features. In the petroleum industry, paleokarst features can have positive or negative consequence resulting in a potential reservoir with enhanced porosity due to the paleokarst features, or as a geo-hazard to prepare for or avoid when drilling.

Inspired by issues faced when drilling in the Ft. Worth basin, this study utilizes …

Mechanical Stratigraphy Of The Mississippian In Osage County, Oklahoma, Caleb James Jennings

Graduate Theses and Dissertations

The Mississippian formation of Oklahoma and Kansas has recently developed as a world class unconventional reservoir with wells producing up to 800 bbl/day. The Mississippian is composed of multiple distinct lithologic zones including limestone, hard chert, and soft tripolitic chert. These zones are difficult to discern with traditional log correlation, but mechanical stratigraphy has the potential to improve previous correlations of the Mississippian.

This study uses full wave sonic logs from Osage County, OK to analyze the elastic properties of the Mississippian. Our work computes isotropic elastic parameters in an effort to partition the Mississippian section into units that may …

Seeing Below The Surface With Electrical Resistivity Tomography: Exploring The Deepest Reaches Of Arkansas' Tallest Prehistoric Mounds, James Robert Zimmer-Dauphinee

Graduate Theses and Dissertations

Despite decades of research and over a century of public interest, the most prominent features at Toltec Mounds Archeological State Park, Mound A and Mound B, remain virtually unexamined by modern archaeological techniques, and poorly understood. The tremendous scale and importance of these mounds makes most standard research methods difficult if not impossible. Electrical Resistivity Tomography, a geophysical technique rarely used in North America, was employed to survey both Mound A and Mound B, resulting in models of the subsurface that provide insights into the construction, modification and condition of the mounds.