Graphics and Human Computer Interfaces Commons^™

Culture In Computing: The Importance Of Developing Gender-Inclusive Software, Creighton France

Computer Science and Computer Engineering Undergraduate Honors Theses

The field of computing as we know it today exists because of the contributions of numerous female mathematicians, computer scientists, and programmers. While working with hardware was viewed as “a man’s job” during the mid-20th century, computing and programming was viewed as a noble and high-paying field for women to occupy. However, as time has progressed, the U.S. has seen a decrease in the number of women pursuing computer science. The idea that computing is a masculine discipline is common in the U.S. today for reasons such as male-centered marketing of electronics and gadgets, an inaccurate representation of what it …

Design And Comparison Of Asynchronous Fft Implementations, Julie Bigot

Graduate Theses and Dissertations

Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number …

Electrical Modeling For Dynamic Performance Prediction And Optimization Of Mcpms Layout, Quang Minh Le

Graduate Theses and Dissertations

In recent years, the fast development of Multichip Power Modules (MCPM) packaging and Wide Bandgap (WBG) technology has enabled higher voltage and current ratings, better thermal performance, lower parasitic parameters, and higher mechanical reliability. However, the design of the MCPM layout is a multidisciplinary problem leading to many time-consuming analyses and tedious design processes. Because of these challenges, the design automation tool for MCPM layout has become an emerging research area and gained much attention from the power electronics community. The two critical objectives of a design automation tool for MCPM layout are fast and accurate models for design insights …

Using Bluetooth Low Energy And E-Ink Displays For Inventory Tracking, David Whelan

Computer Science and Computer Engineering Undergraduate Honors Theses

The combination of Bluetooth Low energy and E-Ink displays allow for a low energy wire-less display. The application of this technology is far reaching especially given how the Bluetooth Low Energy specification can be extended. This paper proposes an extension to this specification specifically for inventory tracking. This extension combined with the low energy E-Ink display results in a smart label that can keep track of additional meta data and inventory counts for physical inventory. This label helps track the physical inventory and can help mitigate any errors in the logical organization of inventory.

Implementing The Cms+ Sports Rankings Algorithm In A Javafx Environment, Luke Welch

Industrial Engineering Undergraduate Honors Theses

Every year, sports teams and athletes get cut from championship opportunities because of their rank. While this reality is easier to swallow if a team or athlete is distant from the cut, it is much harder when they are right on the edge. Many times, it leaves fans and athletes wondering, “Why wasn’t I ranked higher? What factors when into the ranking? Are the rankings based on opinion alone?” These are fair questions that deserve an answer. Many times, sports rankings are derived from opinion polls. Other times, they are derived from a combination of opinion polls and measured performance. …

Framework Of Hardware Trojan Detection Leveraging Structural Checking Tool, Rafael Dacanay Del Carmen

Graduate Theses and Dissertations

Since there is a significant demand for obtaining third-party soft Intellectual Property (IP) by first-party integrated circuit (IC) vendors, it is becoming easier for adversaries to insert malicious logic known as hardware Trojans into designs. Due to this, vendors need to find ways to screen the third-party IPs for possible security threats and then mitigate them. The development of the Structural Checking (SC) tool provides a solution to this issue. This tool analyzes the structure of an unknown soft IP design and creates a network of all the signals within the design and how they are connected to each other. …

Analysis Of Gpu Memory Vulnerabilities, Jarrett Hoover

Computer Science and Computer Engineering Undergraduate Honors Theses

Graphics processing units (GPUs) have become a widely used technology for various purposes. While their intended use is accelerating graphics rendering, their parallel computing capabilities have expanded their use into other areas. They are used in computer gaming, deep learning for artificial intelligence and mining cryptocurrencies. Their rise in popularity led to research involving several security aspects, including this paper’s focus, memory vulnerabilities. Research documented many vulnerabilities, including GPUs not implementing address space layout randomization, not zeroing out memory after deallocation, and not initializing newly allocated memory. These vulnerabilities can lead to a victim’s sensitive data being leaked to an …

A Study Of Software Development Methodologies, Kendra Risener

Computer Science and Computer Engineering Undergraduate Honors Theses

Software development methodologies are often overlooked by software engineers as aspects of development that are handled by project managers alone. However, if every member of the team better understood the development methodology being used, it increases the likelihood that the method is properly implemented and ultimately used to complete the project more efficiently. Thus, this paper seeks to explore six common methodologies: the Waterfall Model, the Spiral Model, Agile, Scrum, Kanban, and Extreme Programming. These are discussed in two main sections in the paper. In the first section, the frameworks are isolated and viewed by themselves. The histories, unique features, …

Contrastive Learning For Unsupervised Auditory Texture Models, Christina Trexler

Computer Science and Computer Engineering Undergraduate Honors Theses

Sounds with a high level of stationarity, also known as sound textures, have perceptually relevant features which can be captured by stimulus-computable models. This makes texture-like sounds, such as those made by rain, wind, and fire, an appealing test case for understanding the underlying mechanisms of auditory recognition. Previous auditory texture models typically measured statistics from auditory filter bank representations, and the statistics they used were somewhat ad-hoc, hand-engineered through a process of trial and error. Here, we investigate whether a better auditory texture representation can be obtained via contrastive learning, taking advantage of the stationarity of auditory textures to …

Computational Frameworks For Multi-Robot Cooperative 3d Printing And Planning, Laxmi Prasad Poudel

Graduate Theses and Dissertations

This dissertation proposes a novel cooperative 3D printing (C3DP) approach for multi-robot additive manufacturing (AM) and presents scheduling and planning strategies that enable multi-robot cooperation in the manufacturing environment. C3DP is the first step towards achieving the overarching goal of swarm manufacturing (SM). SM is a paradigm for distributed manufacturing that envisions networks of micro-factories, each of which employs thousands of mobile robots that can manufacture different products on demand. SM breaks down the complicated supply chain used to deliver a product from a large production facility from one part of the world to another. Instead, it establishes a network …

Analog Spiking Neural Network Implementing Spike Timing-Dependent Plasticity On 65 Nm Cmos, Luke Vincent

Graduate Theses and Dissertations

Machine learning is a rapidly accelerating tool and technology used for countless applications in the modern world. There are many digital algorithms to deploy a machine learning program, but the most advanced and well-known algorithm is the artificial neural network (ANN). While ANNs demonstrate impressive reinforcement learning behaviors, they require large power consumption to operate. Therefore, an analog spiking neural network (SNN) implementing spike timing-dependent plasticity is proposed, developed, and tested to demonstrate equivalent learning abilities with fractional power consumption compared to its digital adversary.

Achieving Differential Privacy And Fairness In Machine Learning, Depeng Xu

Graduate Theses and Dissertations

Machine learning algorithms are used to make decisions in various applications, such as recruiting, lending and policing. These algorithms rely on large amounts of sensitive individual information to work properly. Hence, there are sociological concerns about machine learning algorithms on matters like privacy and fairness. Currently, many studies only focus on protecting individual privacy or ensuring fairness of algorithms separately without taking consideration of their connection. However, there are new challenges arising in privacy preserving and fairness-aware machine learning. On one hand, there is fairness within the private model, i.e., how to meet both privacy and fairness requirements simultaneously in …

Stay-At-Home Motor Rehabilitation: Optimizing Spatiotemporal Learning On Low-Cost Capacitive Sensor Arrays, Reid Sutherland

Graduate Theses and Dissertations

Repeated, consistent, and precise gesture performance is a key part of recovery for stroke and other motor-impaired patients. Close professional supervision to these exercises is also essential to ensure proper neuromotor repair, which consumes a large amount of medical resources. Gesture recognition systems are emerging as stay-at-home solutions to this problem, but the best solutions are expensive, and the inexpensive solutions are not universal enough to tackle patient-to-patient variability. While many methods have been studied and implemented, the gesture recognition system designer does not have a strategy to effectively predict the right method to fit the needs of a patient. …

Automatic Methods To Enhance The Quality Of Colonoscopy Video, Nidhal Kareem Shukur Azawi

Graduate Theses and Dissertations

Colonoscopy is a form of endoscopy because it uses colonoscopy device to help the doctor to understand a colon patient. Enhancing the quality of Colonoscopy images is a challenge because of the wet and dynamic environment inside the colon causes many problems even the colonoscope devise has a good quality. Some of these problems are blurriness, specular highlights shiny areas.

In this work, different kinds of techniques have been investigated in order to improve the quality of colonoscopy images. Also, variety of preprocessing approaches (removing bad images, resizing images, median filtration with and without image resizing) have been conducted to …

The Effect Of Incorporating End-User Customization Into Additive Manufacturing Designs, Jonathan D. Ashley

Graduate Theses and Dissertations

In the realm of additive manufacturing there is an increasing trend among makers to create designs that allow for end-users to alter them prior to printing an artifact. Online design repositories have tools that facilitate the creation of such artifacts. There are currently no rules for how to create a good customizable design or a way to measure the degree of customization within a design. This work defines three types of customizations found in additive manufacturing and presents three metrics to measure the degree of customization within designs based on the three types of customization. The goal of this work …

Automatic Performance Optimization On Heterogeneous Computer Systems Using Manycore Coprocessors, Chenggang Lai

Graduate Theses and Dissertations

Emerging computer architectures and advanced computing technologies, such as Intel’s Many Integrated Core (MIC) Architecture and graphics processing units (GPU), provide a promising solution to employ parallelism for achieving high performance, scalability and low power consumption. As a result, accelerators have become a crucial part in developing supercomputers. Accelerators usually equip with different types of cores and memory. It will compel application developers to reach challenging performance goals. The added complexity has led to the development of task-based runtime systems, which allow complex computations to be expressed as task graphs, and rely on scheduling algorithms to perform load balancing between …

Dynamic 3d Network Data Visualization, Brok Stafford

Computer Science and Computer Engineering Undergraduate Honors Theses

Monitoring network traffic has always been an arduous and tedious task because of the complexity and sheer volume of network data that is being consistently generated. In addition, network growth and new technologies are rapidly increasing these levels of complexity and volume. An effective technique in understanding and managing a large dataset, such as network traffic, is data visualization. There are several tools that attempt to turn network traffic into visual stimuli. Many of these do so in 2D space and those that are 3D lack the ability to display network patterns effectively. Existing 3D network visualization tools lack user …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

A Proposed Approach To Hybrid Software-Hardware Application Design For Enhanced Application Performance, Alex Shipman

Graduate Theses and Dissertations

One important aspect of many commercial computer systems is their performance; therefore, system designers seek to improve the performance next-generation systems with respect to previous generations. This could mean improved computational performance, reduced power consumption leading to better battery life in mobile devices, smaller form factors, or improvements in many areas. In terms of increased system speed and computation performance, processor manufacturers have been able to increase the clock frequency of processors up to a point, but now it is more common to seek performance gains through increased parallelism (such as a processor having more processor cores on a single …

Simulating Foodborne Pathogens In Poultry Production And Processing To Defend Against Intentional Contamination, Silas B. Lankford

Computer Science and Computer Engineering Undergraduate Honors Theses

There is a lack of data in recent history of food terrorism attacks, and as such, it is difficult to predict its impact. The food supply industry is one of the most vulnerable industries for terrorist threats while the poultry industry is one of the largest food industries in the United States. A small food terrorism attack against just a single poultry processing center has the potential to affect a much larger population than its immediate consumers. In this work, the spread of foodborne pathogens is simulated in a poultry production and processing system to defend against intentional contamination. An …

Music Feature Matching Using Computer Vision Algorithms, Mason Hollis

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper seeks to establish the validity and potential benefits of using existing computer vision techniques on audio samples rather than traditional images in order to consistently and accurately identify a song of origin from a short audio clip of potentially noisy sound. To do this, the audio sample is first converted to a spectrogram image, which is used to generate SURF features. These features are compared against a database of features, which have been previously generated in a similar fashion, in order to find the best match. This algorithm has been implemented in a system that can run as …

Automatic User Profile Construction For A Personalized News Recommender System Using Twitter, Shiva Theja Reddy Gopidi

Graduate Theses and Dissertations

Modern society has now grown accustomed to reading online or digital news. However, the huge corpus of information available online poses a challenge to users when trying to find relevant articles. A hybrid system “Personalized News Recommender Using Twitter’ has been developed to recommend articles to a user based on the popularity of the articles and also the profile of the user. The hybrid system is a fusion of a collaborative recommender system developed using tweets from the “Twitter” public timeline and a content recommender system based the user’s past interests summarized in their conceptual user profile. In previous work, …

Extending The Hybridthread Smp Model For Distributed Memory Systems, Eugene Anthony Cartwright Iii

Graduate Theses and Dissertations

Memory Hierarchy is of growing importance in system design today. As Moore's Law allows system designers to include more processors within their designs, data locality becomes a priority. Traditional multiprocessor systems on chip (MPSoC) experience difficulty scaling as the quantity of processors increases. This challenge is common behavior of memory accesses in a shared memory environment and causes a decrease in memory bandwidth as processor numbers increase. In order to provide the necessary levels of scalability, the computer architecture community has sought to decentralize memory accesses by distributing memory throughout the system. Distributed memory offers greater bandwidth due to decoupled …

Powersearch: Augmenting Mobile Phone Search Through Personalization, Xiangyu Liu

Computer Science and Computer Engineering Undergraduate Honors Theses

Cell phone has become a fundamental element of people's life. People use it to call each other, browse websites, send text messages, etc. Among all the functionalities, the most important and frequently used is the search functionality. Based on ComScore, in July 2008, Google was estimated to host 235 millions searches per day. However, unlike the search on desktop, the search on cell phone has one critical constrain: battery. Cell phone performing a normal Google search, the battery drains very fast. The reason is that when sending a query to and fetching the results from Google, cell phone keeps communicating …

Mapping Reality Into Virtual Worlds, Josh Mcfarlane

Computer Science and Computer Engineering Undergraduate Honors Theses

As virtual worlds become more prevalent, they become increasingly useful as a means of information dissemination. This thesis examines the possible connections between real world objects and their virtual world counterparts. We look at how, by attaching sensors to an object, or by using a smart object with embedded sensors, the information can be relayed to a server. From this information, it will be possible to create a duplicate object in the virtual world and have it mirror the real world object in terms of state and movement. Almost all current solutions for remotely viewing a room or area are …

Pitch Correction On The Human Voice, Suzanne Ownbey

Computer Science and Computer Engineering Undergraduate Honors Theses

No abstract provided.

Improvement To The Data Logging Capability Of A Cough Monitoring System, Matthew Barlow

Inquiry: The University of Arkansas Undergraduate Research Journal

Data logging capability of a previously developed self contained cough recorder using an accelerometer as the sensing element is improved by using a secure digital memory card for later retrieval on a computer. Firmware is developed to enhance the functionality of the cough recorder. Existing libraries are modified for increased write rates. Increased writing speed allows 8-bit sampling at rates exceeding 8kHz, allowing for detailed time and frequency domain analysis. Additional features have also been developed to enable easy management of recordings, such as a file system compatibility with Microsoft Windows., and unique file names for each recording.