Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 6 of 6
Full-Text Articles in Physical Chemistry
Solid State Nmr Studies Of Lithium Manganese Silicate As Positive Electrode Materials For Li-Ion Batteries, Hu Cheng, Zi-Geng Liu, Yi-Xiao Li, Zhong Chen, Yong Yang
Solid State Nmr Studies Of Lithium Manganese Silicate As Positive Electrode Materials For Li-Ion Batteries, Hu Cheng, Zi-Geng Liu, Yi-Xiao Li, Zhong Chen, Yong Yang
Journal of Electrochemistry
The Li2MnSiO4 cathode material for lithium ion batteries was synthesized by sol-gel assisted hydrothermal method. XRD,FTIR and SS-NMR were used to study the phase,structure and morphology of obtained samples. Electrochemical performance of cathode material was tested. The results show that the main phase of sample prepared was Li2MnSiO4,whereas a small amount of impurities ( Li2CO3) were existed. The Li2MnSiO4 cathode material gave an initial discharging capacity of about 190 mAh·g -1. But this capacity faded rapidly during the cycling process due to the decomposition of Li2MnSiO4.
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang
Journal of Electrochemistry
In this work,the battery impact testing machine has been used to study the failure progress of internal short-circuit ( ISC) for lithium ion batteries. The reaction mechanisms between cathode/anode and electrolyte in the battery at different temperatures were characterized by differential scanning calorimetry ( DSC) ,gas chromatography/mass spectrometry ( GC/MS) and X-ray diffraction ( XRD) . The experimental results show that the ISC failure of the battery was mainly due to the reaction between cathode Li0.5CoO2 and electrolyte. The decomposition and oxygen evolution reactions of cathode occurred when the temperature reached a certain value. At the same time a fierce …
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Journal of Electrochemistry
Layered LiNi1/3Co1/3Mn1/3O2 is one of the most promising alternative materials for LiCoO2 in lithium ion batteries due to its low cost,large capacity and excellent cyclability.In this paper,LiNi1/3 Co1/3 Mn1/3 O2 was synthesized via azeotropic distillation method with isobutyl alcohol as an azeotropic agent.The structure and surface morphology were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM),respectively.The as-prepared LiNi1/3Co1/3Mn1/3O2 shows a layered α-NaFeO2 structure;the particles are small and uniformly distributed.As compared with the sample prepared by traditional method,the present cathode material exhibits superior cyclability and rate capability,which can be ascribed to the enhanced Li + diffusion due to smaller and more …
Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Journal of Electrochemistry
The safety concerns of LIBs are considered to be a main obstacle to their high rate or large capacity applications in electric vehicles.This paper describes briefly our research works on the development of self-activating safety mechanisms for LIBs,including redox shuttle,potential-sensitive separator,temperature-sensitive electrode,and fire-retardent electrolyte.The problems and future in this research area are also discussed.
Preparation And Electrochemical Behavior Of Li_4ti_5o_(12) Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang
Preparation And Electrochemical Behavior Of Li_4ti_5o_(12) Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang
Journal of Electrochemistry
Spinel lithium titanate(Li4Ti5O12) nanosheets with a size range of 200 ～400 nm were synthesized by hydrothermal process from the amorphous hydrous titanium oxide precursors.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The electrochemical behaviors of Li4Ti5O12 electrode in conventional organic electrolyte and ionic liquid electrolyte were investigated by using cyclic voltammetry,galvanostatic charge-discharge and AC impedance techniques.The experimental results indicate that the as-prepared nanostructured Li4Ti5O12,evaluated as anode material,exhibited good reversibility and cycle performance.It is expected to be a potential anode material for commerical battery applications.
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Journal of Electrochemistry
A new series of amphiphilic liquid crystalline block copolymer thin films,having normally aligned and highly ordered nanocylinder array,were functionalized as anisotropic ion conducting materials by selectively infiltration.These ion-active nanocylinders are coaxially aligned and hexagonally arranged in a large area,which might be used as novel types of electrolyte films for electrochemical energy systems such as lithium ion battery,fuel cell,etc.Since the ordered cylinders can carry on and store the ions,the block copolymer films can be utilized as the advanced template to fabricate the ordered array of nanoporous,nanoparticles,and nanowires for the potential application in lithium ion battery as three dimensional electrode materials.