Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 8 of 8

Full-Text Articles in Materials Chemistry

Research Progress Of Intermediate Layers In Ti-Based Oxide Anodes, Xiu-Li Song, Hui-Min Yang, Zhen-Hai Liang Aug 2013

Research Progress Of Intermediate Layers In Ti-Based Oxide Anodes, Xiu-Li Song, Hui-Min Yang, Zhen-Hai Liang

Journal of Electrochemistry

Titanium (Ti)-based oxide anodes are excellent anode materials which have been applied widely in electrochemical fields all over the world. Adding intermediate layers in Ti-based oxide anodes can improve the conductivity, lengthen the lifetime and strengthen the stability between Ti base and metal oxides active layers of electrodes. This article reviews the research progress of intermediate layers in Ti-based oxide anodes. At the same time, current problems existed in the field of Ti-based oxide anodes are pointed out and future development trend in oxide electrode with intermediate layers is prospected.


Preparation And Characterization Of A Novel Composite Electrolyte Ceria-Sulfate For Intermediate Temperature Solid Oxide Fuel Cells, Ze Tong, Yi-Mei Yin, Jie-Wei Yin, Zi-Feng Ma Jun 2013

Preparation And Characterization Of A Novel Composite Electrolyte Ceria-Sulfate For Intermediate Temperature Solid Oxide Fuel Cells, Ze Tong, Yi-Mei Yin, Jie-Wei Yin, Zi-Feng Ma

Journal of Electrochemistry

A novel composite electrolyte SDC-(Li/Na)2SO4 was prepared for intermediate temperature solid oxide fuel cells (ITSOFC). The phase structure and cross-sectional morphology were examined by XRD and SEM, respectively, and the ionic conductivity was investigated by AC impedance in a temperature range of 400 oC ~ 700 oC in air. It was found that the composite electrolyte was composed of two phases: crystal SDC and amorphous (Li/Na)2SO4. The conductivity of the composite electrolyte was significantly larger than that of SDC at intermediate temperatures (550 oC ~ 700 oC) and increased …


Preparation And Electrochemical Performance Of Li_3v_2(Po_4)_3, Hou-Gang Fan, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei Feb 2009

Preparation And Electrochemical Performance Of Li_3v_2(Po_4)_3, Hou-Gang Fan, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei

Journal of Electrochemistry

The carbon coating Li3V2(PO4)3 powder samples were synthesized by carbon incorporation solid state reaction.The structure,morphology and electrochemical properties have been studied by X-ray powder diffraction,scanning electron microscopy and automatic battery tester system,respectively.Carbon coating on Li3V2(PO4)3 would prevent the particles from agglomerating,reduce the particle size,raise the conductivity and improve the samples′ electrochemical performance.


Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang Feb 2009

Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang

Journal of Electrochemistry

The protic ionic liquid(PIL) α-methyl pyridinium trifluoroacetate([α-MPyH]Tfa) was synthesized by acid & alkali neutralization.Then PIL/PVDF-HFP composite membranes were prepared by means of phase inversion method using acetone as solvent.The conductivities of the composite membrane increased with the temperature and reached 8×10-3 S/cm,1×10-2 S/cm and 3×10-2 S/cm at room-temperature,30 ℃ and 80 ℃,respectively,by electrochemical impedance method.The properties of the methanol-rejecting of the membranes were measured by chronoamperometry as well.The results indicate that the properties of methanol-resistance of the membranes before and after IL combination were equivalent approximately.


The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu Nov 2005

The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu

Journal of Electrochemistry

The optimal sulfonation condition of self-doped sulfonated polyaniline(prepared from leucoemeraldinebase;denoted as LEB-SPANI) with a high electronic conductivity was obtained by experimental strategies,includingthe fractional factorial design(FFD) and central composite design(CCD).From the FFD experiment,the self-doped LEB-SPANI prepared at a lowtemperature(4oC),a short reaction time(1 h),and a small volume of fumingsulfuric acid(10 mL) showed a better conductivity(ca.127 mS/cm).In the CCD study coupled with a confirmationtest,the highest conductivity(ca.141 mS/cm) of the LEB-SPANI film was obtained under a sulfonation temperatureof 4oC,a sulfonation time of75 minutes,and a volume of8 mLof30% fuming sulfuric acid.The textural cha-racter-istics of self-doped LEB-SPANI were characterized by Fourier transform infrared(FTIR) spectroscopy,four-pointprobe method,and X-ray …


Electrochemical Performance Of Gel Polymer Electrolyte Prepared By Thermal Initiating Polymerization Of Acrylates, Jin-Dan Piao, Li-Xia Yuan, Xin-Ping Ai, Han-Xi Yang, Yu-Liang Cao Feb 2005

Electrochemical Performance Of Gel Polymer Electrolyte Prepared By Thermal Initiating Polymerization Of Acrylates, Jin-Dan Piao, Li-Xia Yuan, Xin-Ping Ai, Han-Xi Yang, Yu-Liang Cao

Journal of Electrochemistry

A gel polymer electrolyte was prepared by thermal initiating polymerization of the acrylates in the EC/EMC/DMC electrolyte solution at 100℃. The LiCoO_2/MCMB polymer cells were assembled and their electrochemical properties were evaluated at various charge-discharge rate and temperatures. The ionic conductivity of the polymer electrolyte containing 85wt.% liquid electrolyte is around 3.2×10~(-3)S·cm~(-1) at 20℃ and 5.6×10~(-4)S·cm~(-1)at -30℃ respectively. The gel polymer electrolyte has good electrochemical stability up to 4.5V versus Li/Li~(+).The first charge-discharge efficiency of the polymer cell at 0.2C rate is almost 92.1%. The discharge capacity of the cell at 1.0C rate is 95% of the capacity at the …


Recent Developments In The Electrolyte For Lic _6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin May 2002

Recent Developments In The Electrolyte For Lic _6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

We present a reviewed the development and status of electrolyte for LiC 6/electrolyte/cathode battery. The effect of the salt, solvent, additive and impurity on the conductivity of the electrolyte, formation of the solid_electrolyte_interphase (SEI) and cycle life of the battery were described.


Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xianyou Wang, Yunshi Zhang, Jie Yan, Zheng Zhu, Huatang Yuan, Deying Song Feb 1999

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xianyou Wang, Yunshi Zhang, Jie Yan, Zheng Zhu, Huatang Yuan, Deying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface_deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH) 2/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.