Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Catalytic activity (2)
- Glucose electro-oxidation (2)
- Stability (2)
- 3D printing (1)
- Accessibility (1)
-
- Aerogel (1)
- Au (1)
- Automotive exhaust (1)
- Biodiesel (1)
- Blind/low vision (1)
- Carbon monoxide (1)
- Catalyst (1)
- Catalytic converter (1)
- Chemistry (1)
- Chromia (1)
- Chromium (1)
- CuOx (1)
- Density functional theory (1)
- Dicamba (1)
- Direct dynamics (1)
- Direct formic acid fuel cells (1)
- Dye removal (1)
- Electrocatalysis (1)
- Electrodeposition potential (1)
- Electron paramagnetic resonance (1)
- Fatty-acid methyl esters (1)
- Formic acid electro−oxidation (1)
- Free radicals (1)
- Fuel cells (1)
- Glucose electro-oxidation; Ni; Au; Catalytic activity; Stability (1)
- Publication
- Publication Type
Articles 1 - 12 of 12
Full-Text Articles in Environmental Chemistry
Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo
Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo
Journal of Science Education for Students with Disabilities
This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.
Development Of Catalytic Chromia-Based Aerogels, Fiona Fitzgerald
Development Of Catalytic Chromia-Based Aerogels, Fiona Fitzgerald
Honors Theses
Over one billion automobiles are in use around the world, the majority of which employ internal combustion engines. Catalytic converters are used to convert the toxic compounds found in car exhaust -- carbon monoxide, nitrogen oxides (NOx) and hydrocarbons -- to less harmful gases. The typical catalytic converter employs as catalysts expensive raw materials (platinum, palladium and/or rhodium) wash-coated onto an alumina-based ceramic substrate. Aerogel materials have high surface area and thermal stability, properties that make them attractive for catalysis applications. Aerogels made with transition metal oxides are candidates to replace platinum in the catalytic converter. Chromium oxide (chromia) materials …
Behavior Of Iron Species And Free Radicals In Ambient Pm2.5 And Pm Surrogates, Cholena Russo Ren
Behavior Of Iron Species And Free Radicals In Ambient Pm2.5 And Pm Surrogates, Cholena Russo Ren
LSU Doctoral Dissertations
Air pollution, consisting of ambient particulate matter (PM), has been a rising health concern to the public. PM contains free radicals and have been known to damage human cells; however, their free radical chemistry is not well understood. This study utilized various vacuum and/or heat treatments to study free radical behavior in PM2.5 (particulate matter with an aerodynamic diameter of 2.5 mm or less) and PM surrogates and simulated sunlight effects on PM2.5. To mimic PM, iron-silica catalysts (i.e. PM surrogates) were synthesized and real-world ambient PM2.5 was selected. The free radicals in PM2.5 …
Improving Biodiesel Through Pyrolysis: Direct Dynamics Investigations Into Thermal Decomposition Of Methyl Linoleate, Michael Bakker
Improving Biodiesel Through Pyrolysis: Direct Dynamics Investigations Into Thermal Decomposition Of Methyl Linoleate, Michael Bakker
MSU Graduate Theses
Dependence on petroleum and petrochemical products is unsustainable as it is both a finite resource and environmentally hazardous. Biodiesel is a proposed alternative, but has complications including possessing poor cold weather operability and lacking the ability to supplement other petrochemical products (e.g., ethylene, hexane, etc.) relied upon in society. Pyrolysis of biodiesel has demonstrated the formation of smaller hydrocarbons comprising many of these petrochemical products. Our aim is to computationally simulate the pyrolysis of methyl linoleate, the most prevalent component in biodiesel formed in the US (from soybean). We make use of unimolecular direct dynamics describing intramolecular processes, introducing Temperature …
Spectroscopic And Computational Studies Of The Agricultural Active Ingredient Dicamba, James Johnson
Spectroscopic And Computational Studies Of The Agricultural Active Ingredient Dicamba, James Johnson
Honors Theses
3,6-dichloro-2-methoxy benzoic acid, more commonly known as Dicamba, is the active ingredient in an array of pesticides used on farmlands across the globe. Dicamba’s mode of action works by mimicking the plant hormone auxin, which is synonymous to growth hormones in mammals. The mimicking of auxin results in excessive elongation and growing, which is eventually fatal for plants when the rate of growth can no longer be sustained. Dicamba has risen in prominence in recent years due to drift damage as a result of Dicamba’s high volatility. Having the ability to identify Dicamba is crucial for the agricultural industry. The …
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Aya S. Abdulhalim Eng
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Aya S. Abdulhalim Eng
Chemical Engineering
This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mahmoud M. Abuzaied Eng
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mahmoud M. Abuzaied Eng
Chemical Engineering
The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag-1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not …
A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof
A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof
Chemical Engineering
The CO poisoning of the platinum anodic catalyst which typically functions the catalytic deterioration of the direct formic acid fuel cells could be minimized with a simple modification for Pt with titanium oxide. The fabrication scheme involved the spin-coating of a Ti precursor onto a Pt thin layer that was physically sputtered onto a Si substrate. The whole assembly was subjected to a post-annealing processing to produce the TiOx layer (60 nm) in a porous structure (mostly Anatase) atop of the Pt surface. The porous nature of the TiOx layer permitted the participation of Pt in the electrocatalysis of the …
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …
Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof
Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof
Chemical Engineering
The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Chemical Engineering
The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …