Chemistry Commons^™

Evaluation Of P(Hema-Co-Nipam) Hydrogels For Removal Of Methylene Blue From Aqueous Solution:Isotherm, Kinetic, And Thermodynamic Studies, Hayri̇ye Mi̇ne Antep, Müni̇re Nalan Demi̇r, Cevher Gündoğdu Hizliateş, Si̇mge Öztürk, Eli̇f Esen

Turkish Journal of Chemistry

In this study, a novel adsorbent material, poly (2-hydroxyethyl methacrylate-co-N-isopropyl acrylamide) (p(HEMA-co-NIPAM) hydrogel, was synthesized for the purpose of removing methylene blue (MB) from aqueous media. The synthesis of hydrogel was carefully conducted, and its properties were thoroughly examined using techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The adsorption experiments conducted revealed a remarkable affinity of p(HEMA-co-NIPAM) hydrogel towards MB. The highest adsorption was observed when 0.05 g of the adsorbent were utilized, with optimal conditions at a pH of 6.0 and a temperature of 15 °C. This underscores the importance of …

Treatment Of Oil Refinery Wastewater Polluted By Heavy Metal Ions Via Adsorption Technique Using Non-Valuable Media: Cadmium Ions And Buckthorn Leaves As A Study Case, Salem Jawad Alhamd, Mohammed Nsaif Abbas, Mehrdad Manteghian, Thekra Atta Ibrahim, Karar Dawood Salman Jarmondi

Karbala International Journal of Modern Science

This study focuses on the removal of cadmium ions generated by oil refinery wastewater, employing an agricultural by-product. Buckthorn leaves, sourced from Baghdad and Diyala provinces, underwent preparation, including washing, drying, crushing, and sieving before being utilized in experiments. Batch experiments were conducted using simulated solutions to assess the impact of six key adsorption design parameters: pH, cadmium concentration, agitation speed, contact time, adsorbent dosage, and temperature. The highest adsorption efficiency, reaching 94.4367%, was directly correlated with contact time, adsorbent dosage, pH value, and agitation speed, and inversely related to other variables. Morphological studies on the treated adsorbent, indicated structural …

Removal Of Toxic Cr(Vi) From Aqueous Medium With Effective Magnetic Carbon-Based Nanocomposites, Ferda Ci̇van Çavuşoğlu, Gülsüm Özçeli̇k, Şahi̇ka Sena Bayazi̇t

Turkish Journal of Chemistry

Cr(VI), which has toxic effects, is a heavy metal and it must be removed from the environment due to the various damages it causes. In this study, the removal of Cr(VI) pollutants from aqueous solutions with Fe3O4-based materials using a batch adsorption technique was investigated. Magnetically modified graphene nanoplatelet (GNP)-based nanocomposites were prepared and their structures were characterized by FTIR, XRD, SEM, BET, and TGA techniques. The effects of various physicochemical parameters such as adsorbent dose, contact time, initial Cr(VI) solution concentration, pH, and the presence of coexisting ions (NaCl) on the adsorption process were investigated. Accordingly, the optimum conditions …

Advances In Cellulose Nanomaterial-Based Foams For Environmental Applications, Md Musfiqur Rahman

Electronic Theses and Dissertations

The use of metal-oxide nanoparticles adsorbents is limited to fixed-bed columns in industrial-scale water treatment applications. This limitation is commonly attributed to the tendency of nanoparticles to aggregate, the use of non-sustainable and inefficient polymeric resins as supporting materials, or a lack of adsorption capacity. Foams and aerogels derived from cellulose nanomaterials have unique characteristics, such as high porosity and low density, which enables their use in a variety of environmental applications, including water treatment. However, the overall use of cellulose nanomaterial-based foams in various environmental sectors is limited due to the high cost of production associated with time- and …

Eggshell-Alginate Composites (Eacs) As Eco-Friendly Adsorbents For Rhodamine B Uptake From Aqueous Solutions, Rusnadi Rusnadi, Mar’Atus Sholihah, Nurrahmi Handayani, Muhammad Ali Zulfikar

Karbala International Journal of Modern Science

The contamination of wastewater by Rhodamine B (RhB) poses a significant environmental concern due to its negative impacts on aesthetics, ecosystems, and human well-being. This study successfully synthesized eco-friendly egg-shell-alginate composites (EACs) as adsorbents by combining alginate solution, eggshell powder, and a 2% CaCl2 solu-tion. Characterization techniques including FTIR, SEM, TGA, and SAA were employed to analyze the EACs. FTIR analysis revealed characteristic absorption peaks corresponding to -OH groups, C=O groups, C-O groups, and the pres-ence of CO32-. The structural analysis confirmed the physical mixture of functional groups from eggshells and alginate, resulting in a homogeneous EACs mixture. TGA analysis …

Adsorption Performance Of Mg0.33ni0.33co0.33fe2o4 Nanoparticles Doped With Gadolinium And Lanthanum For Lead (Ii) Removal, Mariam Rabaa, Amani Aridi, Ghassan Younes, Ramadan Awad

BAU Journal - Science and Technology

The issue of water pollution has become a major concern in recent times, and the need for effective strategies for treating contaminated water sources has become more urgent. One promising approach that has been gaining attention in the field of wastewater treatment is the use of nano-ferrites. In this regard, novel Mg_0.33Ni_0.33Co_0.33La_xFe_2-xO₄ and Mg_0.33Ni_0.33Co_0.33Gd_xFe_2-xO₄ nanoparticles (NPs), where x = 0.00, 0.01 and 0.08, were synthesized to test their adsorption performance for the removal of Pb (II). The structural …

Computational Comparison Of Platinum, Base Metals, And Binary Intermetallic Compounds’ Efficiency In Hydrogenation Catalysis, Lauren M. Sayler

MSU Graduate Theses

In the petroleum industry, platinum is used as a catalyst in hydrogenation reactions during petroleum refining. Although platinum is extremely effective as a catalyst, it is expensive. This is an investigation into platinum and what characteristics make it so efficient, with the end goal of finding intermetallic compounds composed of base metals that are as effective in hydrogenation catalysis. The metals used in this investigation are Fe, Co, Ni, Mo, and W. The research performed here is computational and used to support and direct decisions made in the laboratory. The computation is first-principle, which is accomplished using Vienna Ab initio …

Removal Of Amoxicillin Via Chromatographic Monolithic Columns: Comparison Between Batch And Continuous Fixed Bed, Mustafa Deni̇z Ağlamaz, Koray Şarkaya, Deni̇z Türkmen, Mustafa Uçar, Adi̇l Deni̇zli̇

Turkish Journal of Chemistry

This study presented a hydrophobic interaction-based poly(HEMA-MATrp) monolithic chromatographic column (MCC) to remove amoxicillin from aqueous solutions. In addition to their porous structure, monolithic-filled columns offer superior properties without loss of performance, which is one of the points that make them unique. The specific surface area of the monolithic column synthesized by the bulk polymerization of 2-hydroxyethyl methacrylate and N-Methacryloyl-L-tryptophan. Also, poly(HEMAMATrp) MCC has been characterized via FTIR, SEM, and elemental analysis. According to BET analysis, the specific surface area of the poly(HEMA-MATrp) monolithic chromatographic column (MCC) is 14.2 mg/g. The adsorption and desorption of amoxicillin in an aqueous solution …

Investigation Of Boron Adsorption By Graphene Oxide: Equilibrium, Kinetic, And Thermodynamic Studies, Mehmet Fati̇h Önen, Nalan Erdöl Aydin, Osman Eksi̇k, Peli̇n Demi̇rci̇vi̇, Gülhayat Saygili

Turkish Journal of Chemistry

Graphene oxide, which has a great application in industry, is one of the promising carbonous materials. Modified Hummers method was applied to synthesize graphene oxide. Characterization techniques showed that pure graphene oxide was successfully obtained. Its adsorptive properties were investigated by boron adsorption. The results were demonstrated that boron adsorption on graphene oxide was a pH-dependent process and maximum adsorption was achieved at pH 6 (0.98 mg g?1). Langmuir adsorption capacity was calculated as 3.92 mg g?1 with R2 = 0.99. The kinetic data brought to light that pseudosecond-order kinetic model was well described the experimental data (R2 = 0.99), …

Synthesis And Characterization Of Nanocomposites For Environmental Remediation, Nethaji S

Technical Collection

My current work deals with the preparation and characterization of nanocomposites for effluent treatment applications. The expertise lies on the preparation of carbonaceous nanocomposites including graphitic materials. The prepared materials are characterized thoroughly by different methods like FE-SEM, TEM, FT-IR, XRD, VSM, surface area and porosity. The composite materials are used for the removal of conventional and emerging contaminants like antibiotics, pesticide residues, endocrine disruptors etc. In addition to the batch studies, fabrication of microcolumns to aid the scale-up of the process is also carried out. I have published 14 research publications with around 1000 citations and h-index of 11. …

Preparation Of Zn/Al-Chitosan Composite For The Selective Adsorption Of Methylene Blue Dye In Water, Risfidian Mohadi, Patimah Mega Syah Bahar Nur Siregar, Neza Rahayu Palapa, Aldes Lesbani

Makara Journal of Science

Layered double hydroxide (LDHs) are widely used adsorbents for methylene blue removal. However, LDHs have a perishable structure that cannot be used repeatedly. Modifying LDHs with chitosan produces a strong material with a large surface area for methylene blue adsorption. Adsorption conditions were optimized by determining the adsorption isotherms and the adsorbent regeneration process. Results showed that the adsorption process was balanced in 90 min with maximum adsorption capacities of 86.207 mg/g, 35.336 mg/g, and 98.039 mg/g for Zn/Al, chitosan, and Zn/Al-chitosan, respectively. The adsorption in this study followed the Freundlich isotherm model. Regeneration analysis of the adsorbent showed that …

Electrochemical Sers Study Of Benzotriazole And 3-Mercapto-1-Propanesulfonate In Acidic Solution On Copper Electrode, Yin-Fei Shen, Yan-Li Chen, Sheng-Xu Wang, Ye Zhu, Wen-Chang Wang, Min-Xian Wu, Zhi-Dong Chen

Journal of Electrochemistry

Since the development of acid copper plating technology, the role of additives is indispensable. In addition to the main salt copper sulfate and supporting electrolyte sulfuric acid, suppressors, accelerators, levelers and chlorine ions (Cl-) are also required to be added into the plating solution. Appropriate additive system can have a significant impact on the coating or the plating solution, which can help improve the quality of the coating and increase the brightness of the coating. Through electrochemical measurement, vibrational spectroscopy, scanning probe microscopy, molecular dynamics simulation and other methods, researches have a deeper understanding in the adsorption configuration of some …

Temperature-Resolved Surface Infrared Spectroscopy Of Co On Rh(111) And (2 × 1)-O/Rh(111), Elizabeth A. Jamka, Maxwell Z. Gillum, Christina N. Grytsyshyn-Giger, Faith J. Lewis, Daniel Killelea

Chemistry: Faculty Publications and Other Works

Heterogeneously catalyzed reactions over transition metal surfaces are pillars of chemical industry and account for a significant fraction of the global energy demand. CO oxidation provides insight into the relative reactivity of various oxygenaceous surface phases, and it is necessary to first understand where it binds to the surface and the nature of the local environment to develop robust mechanistic pictures of the reaction. Surface IR spectroscopy is a quantitative technique that also provides information about the binding sites and chemical environments of the adsorbed CO molecules. Here, we report results from a study of CO sticking to clean Rh(111) …

Influence Of Citrate And Phosphate On The Adsorption Of Adenosine-5′-Monophosphate At The Hematite Water Interface, Sudipta Rakshit, Avedananda Ray, Ali Taheri, Michael E. Essington

Agricultural and Environmental Sciences Faculty Research

Nucleic acid derived organic phosphorus (Po) is an important source of plant available P when degraded to inorganic phosphate (P(V)i). It is known that when nucleic acids or components are adsorbed on mineral surfaces, the enzymatic degradation is hindered or delayed. Thus, understanding adsorption/desorption mechanisms of nucleic acids and their derivatives are key to assess the biogeochemical pathways of Po cycling. Here we report adsorption mechanisms of adenosine-5′-monophosphate (AMP) on hematite, a common iron oxide mineral, under various solution properties using macroscopic and in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopic probes. The effects of citrate, mimicking organic …

Adsorption Of Microcystins To Sediment Affects Their Bioavailability And Remediation, Ashley Womer

Theses and Dissertations

The freshwater harmful algae Microcystis spp produces a family of toxins called microcystins1. These species of algae are known to release microcystins from their cells directly into the surrounding water2. This creates an array of human health risks depending on the fate and transport of the toxins in the water column3,4. Risk modelling and previous literature has shown that sediment is a sink for free microcystin, microcystin can be stably adsorbed to sediment for hundreds of years, and its adsorption to sediment is determined by the sediment adsorption partitioning coefficient (Kd)5,6,7. In this work it is hypothesized that the sediment …

Efficient Removal Of Lead Ions From Aqueous Media Using Sustainable Sources On Marine Algae, Hannah Namkoong, Erik Biehler, Gon Namkoong, Tarek M. Abdel-Fattah

Electrical & Computer Engineering Faculty Publications

The goal of this project is to explore a new method to efficiently remove Pb(II) ions from water by processing Undaria pinnatifida into immobilized beads using sodium alginate and calcium chloride. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Using immobilized U. pinnatifida, we investigated the effect of various factors on Pb(II) ion removal efficiency such as temperature, pH, ionic strength, time, and underlying biosorption mechanisms. For Pb(II) ion biosorption studies, Pb(II) ion biosorption data were obtained and analyzed using Langmuir and Freundlich adsorption models. It …

Adsorption Isotherms, Kinetic And Thermodynamic Studies On Cadmium And Lead Ions From Water Solutions Using Amberlyst 15 Resin, Adalet Tunceli̇, Abdullah Ulaş, Orhan Acar, Ali̇ Rehber Türker

Turkish Journal of Chemistry

Adsorption isotherms, kinetic and thermodynamic parameters for Cd(II) and Pb(II) ions in water solutions by using Amberlyst 15 resin were performed and evaluated by utilizing solid phase extraction method with the batch system at 298, 308, and 318 K. Flame atomic absorption spectrometry was utilized for absorbance measurements of Cd and Pb in solutions. The Langmuir, Freundlich, and Dubinin?Radushkevich isotherm models, respectively were implemented to equilibrium results obtained. Experimental and theoretical monolayer adsorption capacities of resin for adsorptions of Cd(II) and Pb(II) by the Langmuir isotherm model were approximately the same and they were 120 and 116 mg/g for Cd(II) …

Uio-Type Metal-Organic Framework Derivatives As Sorbents For The Detection Of Gas-Phase Explosives, Matthew Ryan Sherrill

Legacy Theses & Dissertations (2009 - 2024)

The detection of energetic compounds – better known to the public as explosives – has is an important cornerstone of counterterrorism and homeland security . While significant advances have been achieved for the detection of trace explosives in various matrices such as soil, wastewater, and clothing, the detection of explosives in the gas phase remains challenging due to their infamously low vapor pressures. In this thesis, we leverage the high sensitivity of direct analysis in real-time mass spectrometry (DART-MS) and the microporosity of metal-organic frameworks (MOFs) to adsorb and therefore concentrate explosives from the vapor phase and subsequently detect them …

Synthesis Of Modified Nanocomposite Material And Its Use On Removal Of Cesium Fromaqueous Media, Bi̇lal Çeti̇n, Mustafa Özcan, Bektaş Karakelle

Turkish Journal of Chemistry

A nanocomposite containing Fe3O4, chitosan (Ch), and hexacyanoferrate (HCF) was synthesized in the form of powder. The physicochemical properties of this nanocomposite are determined using different techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The existence of Cs (Cs) ions onto the surface of the nanocomposite was verified by dispersive X-ray spectroscopy (EDX). FTIR spectra confirmed that the nanocomposite was well coordinated. The batch technique was applied to evaluate the influences of initial pH value, temperature, contact time, shaking rate, initial Cs concentration, and competing cations on the efficiency of Cs …

Thermodynamic And Kinetic Study Of Adsorptive Removal Of Lead By The Nanocompositeloaded Nanofibers, Urwa Mahmood, Sharjeel Abid, Bilal Qadir, Ahsan Nazir, Tanveer Hussain

Turkish Journal of Chemistry

Herein, the fabrication of electrospun nanocomposites, using polyacrylonitrile nanofibers (PNF) modified with nanobentonite and fly ash, is explained. Further, the use of electrospun adsorbent for the remediation of Pb (II) ions from water has been explored. Pristine PNF and nanocomposites were characterized using SEM, EDX, and FTIR to analyze surface topology, elemental composition, and functional groups, respectively. The adsorptive behavior of developed adsorbents was investigated using the effects of dosage, initial concentration, time, and temperature. Pseudo-second order kinetics fit well with experimental data and the adsorption followed intra-particle diffusion. The thermodynamics study confirmed spontaneous endothermic adsorption of the heavy metal. …

Adsorption Of Dimethyl Disulfide Onto Activated Carbon Cloth, Fi̇rdevs Mert, Numan Hoda, Ayhan Topuz, Leyla Budama Akpolat, Emrah Eroğlu

Turkish Journal of Chemistry

Dimethyl disulfide (DMDS) has a specific unpleasant odour and is profoundly toxic with an odour threshold of around 7-12 ppb. In this study, the removal of DMDS was investigated by adsorption on activated carbon cloth (ACC) in the gas phase. Kinetics and isotherm studies were performed. Adsorption kinetics followed by GC-MS and the data were processed using different models. When correlation coefficients (R2) of linear regression analysis are analyzed, it is seen that the concordance of experimental data to the pseudo-second-order equation is quite good. Isotherm data have been examined using Freundlich, Temkin and Langmuir models. The regression coefficient (R2) …

Intake Of Divalent Copper And Nickel Onto Natural Zeolite From Aqueous Solutions: A Study In Mono- And Dicomponent Systems, Burak Teki̇n, Ünsal Açikel

Turkish Journal of Chemistry

In this study, the noncompetitive and competitive adsorption process of copper (II) and nickel (II) ions on the natural zeolite were examined in simulated wastewater in a batch system with respect to concentration, pH and temperature. Optimum pH values were found as 5,0 for adsorption of copper and nickel ions on the zeolite. The effect of initial concentration and ambient temperature on the yield of adsorption was examined at this pH value. The equilibrium adsorption data of Cu (II) and Ni (II) onto the zeolite were analyzed by the Langmuir's and Freundlich's isotherms, and the experimental metal uptake data fitted …

High-Efficiency Removal Of Cationic Dye And Heavy Metal Ions From Aqueous Solution Using Amino-Functionalized Graphene Oxide, Adsorption Isotherms, Kinetics Studies, And Mechanism, Meti̇n Çelebi̇, Eda Gökirmak Söğüt

Turkish Journal of Chemistry

GO-NH₂ (amino functionalized graphene oxide) was synthesized by grafting (3-aminopropyl) triethoxysilane onto the surface GO (graphene oxide). The GO-NH₂ with a higher surface area and many active sites was characterized and its effectiveness in removing Rhod B dye and Ni(II) ions from wastewater by adsorption was observed. The effects of pH, time, and strange ions on the adsorption efficiency were investigated. The equilibrium isotherm data confirmed that it fits the Langmuir and Freundlich isotherm models. GO and GO-NH₂ exhibited high adsorption capacity (Q_M); 2500 (mg L^-1) and 3333 (mg L^-1) for …

Adsorptive Removal Of Crystal Violet From Aqueous Solution By Ultrasonic-Assisted Synthesized Zirconium-2,6-Naphthalenedicarboxylate Metal-Organic Framework, Penmethsa Kiran Kumar, Sunkara Satya Veni

Turkish Journal of Chemistry

Zirconium-2,6-naphthalenedicarboxylate metal-organic framework (Zr-NDC MOF) was prepared using ultrasound-assisted synthesis and tested for the adsorptive removal of crystal violet (CV) dye from aqueous solution. The pristine Zr-NDC was characterized using powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, Fourier-transform infrared, elemental analysis, and dynamic light scattering techniques. The maximum percentage removal of CV dye was found to be 99.45% with an initial dye concentration of 10 mg L^-1. The kinetics and adsorption isotherm models were used to investigate the removal of CV dye from aqueous solution using Zr-NDC. Langmuir adsorption isotherm model (R^{2 …}

Homonuclear Nickel(Ii) Metal-Organic Framework-Type Supramolecule: Adsorption And Emission Properties, Idongesit Mbonu, Olusegun Abiola, Hamzah Bawa

Turkish Journal of Chemistry

Coordination-driven self-assembly of nickel (II) ions with equimolar amounts of 1, 10 phenanthroline, and benzoic acid was used to create homonuclear nickel (II) MOF-type supramolecule. Single crystal X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, photoluminescence measurement, FT-IR, UV-visible spectroscopy, and nitrogen physisorption measurement were used to characterize the compound. The single crystal X-ray diffraction study reveals that the synthesized compound is two-dimensional with pores in the structure. The homonuclear nickel (II) MOF-type supramolecule crystallized in a triclinic crystal system, with space group P-1 (No.2) and unit cell parameters a = 9.2053(4) Ǻ, b = 13.2964(5) Ǻ, c = 15.8998(6) …

Kinetic, Isotherm, And Thermodynamic Studies For Adsorptive Removal Of Basic Violet 14 From Aqueous Solution, Yasemi̇n Tamer, Hale Berber

Turkish Journal of Chemistry

In this study, the performance of chitosan based semi-IPN nanocomposite hydrogels for the adsorptive removal of basic violet 14 (BV14) from aqueous solution has been explored. Batch adsorption studies were conducted to determine the effect of various parameters on BV14 adsorption, and optimum values were reported as pH of 8, the adsorbent dosage of 0.025 g, initial BV14 concentration of 5 mg L^-1 and contact time of 90 min at a temperature of 25 °C. The semi-IPN hydrogel containing 0.5% by weight GO showed the improved adsorption capacity for BV14 compared to the neat hydrogel adsorbent, and the maximum …

Thermodynamic And Kinetic Of Eriochrome Black-T Adsorption Onto Yemeni Palm-Date Stones, Abdulrahman Yousef Wahoud, Sawsan Awadh Almaqdi

Hadhramout University Journal of Natural & Applied Sciences

Removal of eriochrome black-T (EB-T) dye from aqueous solutions was performed by adsorption onto Yemeni palmdate stones. The adsorption isotherm was found to follow the Langmuir model. Two simplified kinetic models including pseudo-first order and pseudo-second order equation were selected to follow the adsorption processes. Kinetic studies showed that the adsorption followed pseudo-first order kinetic model. Various thermodynamic parameters such as Δ𝐻 = -3465.3 J/mole and Δ𝑆 = -10.1 J/K/mole. Δ𝐺 was found to be -4495.5, -2195.2, -2235.7 and -45.39 J/mole at 298, 318, 328 and 338 K respectively, the maximum adsorption capacity was equal to 142 mg/g. The results …

Production And Adsorption Of Volatile Tellurium Hexafluoride, Stephanie H. Bruffey

Doctoral Dissertations

Research and development supporting the management of off-gases from nuclear fuel reprocessing has historically been focused on the off-gas streams that arise from aqueous reprocessing technology. With the advent of advanced reactor designs off-gas streams arising from advanced reprocessing methodology, such as that of FV [fluoride volatility] processing, also merit consideration. This work focuses on TeF₆ [tellurium hexafluoride], one of the most volatile radioactive compounds produced during FV, and investigates TeF₆ production, measurement, and abatement technologies.

To assist in on-line monitoring of TeF₆ by Fourier-transformed infrared spectroscopy, this work systematically used the ideal gas law and Beer’s …

Investigating Thermodynamics And Kinetics Of Methylene Blue And Eriochrome Black-T Adsorption On Activated Carbon Prepared From Coconut Husk, Abdul Rahman Wahoud, Lotfi Abdul Samed Bawazer

Hadhramout University Journal of Natural & Applied Sciences

In this research, the adsorption process was studied for methylene blue eriochrome black-T from aqueous solutions on the surface of activated carbon prepared from coconut husk by chemical activation with potassium hydroxide. The results show that the adsorption isotherm for methylene blue follows the Langmuir model while it follows the Freundlich model and the maximum adsorption capacity was 909 mg/g for methylene blue and 262 mg/g for eriochrome black-T. The equilibrium contact time reached in about 90 minutes at lower concentrations and 120 minutes at higher concentrations. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equations were selected to follow …

Simulated Breathing: Application Of Molecular Dynamics Simulations To Pulmonary Lung Surfactant, Maksymilian Dziura, Basel Mansour, Mitchell Dipasquale, P. Charukeshi Chandrasekera, James W. Gauld, Drew Marquardt

Chemistry and Biochemistry Publications

In this review, we delve into the topic of the pulmonary surfactant (PS) system, which is present in the respiratory system. The total composition of the PS has been presented and explored, from the types of cells involved in its synthesis and secretion, down to the specific building blocks used, such as the various lipid and protein components. The lipid and protein composition varies across species and between individuals, but ultimately produces a PS monolayer with the same role. As such, the composition has been investigated for the ways in which it imposes function and confers peculiar biophysical characteristics to …