Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Cyclic voltammetry (7)
- Carbon nanotubes (4)
- Electrocatalysis (4)
- Modified electrode (4)
- Platinum (4)
-
- Electrochemical performance (3)
- Electrochemistry (3)
- LiFePO4 (3)
- Lithium ion battery (3)
- Oxygen reduction (3)
- Supercapacitor (3)
- 2 (2)
- 3 (2)
- Au (2)
- Carbon paste electrode (2)
- Cathode material (2)
- Corrosion (2)
- Corrosion inhibitor (2)
- Direct electrochemistry (2)
- EIS (2)
- Electrochemical capacitor (2)
- Electrochemical deposition (2)
- Electrochemical impedance spectroscopy (2)
- Electrodeposition (2)
- Electroless plating (2)
- Electromagnetic shielding fabric (2)
- Glassy carbon electrode (2)
- Ionic liquid (2)
- Magnesium alloy (2)
- Molten salt (2)
Articles 1 - 30 of 90
Full-Text Articles in Chemistry
Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie
Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie
Journal of Electrochemistry
Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.
Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang
Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang
Journal of Electrochemistry
The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship with the ammonia concentration,illustrating that the Ir/C …
Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li
Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li
Journal of Electrochemistry
The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.
Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang
Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang
Journal of Electrochemistry
By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.
Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang
Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang
Journal of Electrochemistry
The electrochemical behavior of paracetamol(PCT) was studied at glassy carbon electrode activated by cyclic voltammetry.In HAc-NaAc buffer solution(pH=4.00),a couple of sensitive redox peaks were recorded about 0.54 V in the cyclic voltammograms.The result indicated that the process was controlled by adsorption and nearly reversible.The reaction electron and proton numbers were estimated,respectively,to be two.Excllent linearity was observed in the correlation between the oxidation peak current and the concentration of PCT in the range of 8.00×10-6～2.00×10-4 mol·L-1.The correlative coefficient was-0.999 18.The detection limit was 6.34×10-6 mol·L-1.This method can be used for the determination of PCT real samples.
Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu
Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu
Journal of Electrochemistry
Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.
Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang
Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang
Journal of Electrochemistry
A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.
The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong
The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
The cathode materials of nanosiged LiFePO4 were prepared by hydrothermal templating synthesis.The grain sizes and electrochemical performance of LiFePO4 were controlled by surfactant.It was shown that the grain sizes varied from less than a hundred to hundreds nanometers by the SEM images.In the charge/discharge tests,the discharge capacities of the sample as a lithium ion battery were achieved to 150 mAh/g at 0.1C,140 mAh/g at 1C,and 126 mAh/g at 2C,with good cycling performance.
Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang
Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang
Journal of Electrochemistry
The effect of the polyethylene glycol(PEG) molecular weight(MW) upon via-hole filling with diameter of 50 μm and aspect ratio of 1 in the acid copper plating solution was studied.The cathodic polarization in copper electroplating bath with PEG of different molecule weights was investigated by linear sweep voltammetry.The surface roughness,crystallography,and the resistivity of copper films were characterized by X-ray diffraction(XRD),atomic force microscopy(AFM) and the four-point probe measurements.The results showed that the polarization on the cathode and the hole-filling capability of electroplating copper bath were increased evidently with an increase of PEG molecular weight from 600 to 8000.When the PEG MW was …
Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang
Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang
Journal of Electrochemistry
The texturization of(100) crystalline silicon(c-Si) wafer was studied by field-emission scanning electron microscope using different kinds of etchant: sodium hydroxide,sodium carbonate and tribasic sodium phosphate.By optimizing the etching parameters,the lowest values of averaged reflectance(Rav) were obtained to be 9.70% for NaOH,9.76% for Na2CO3 and 8.63% for Na3PO4·12H2O,which is comparable to that of the wafer with textured surface covered with an anti-reflection coating of either silicon nitride or thermally grown silicon dioxide.The relation of Rav and surface morphology of textured wafer was analyzed.Moreover,special emphasis was put on the role of isopropyl alcohol(IPA) and sodium bicarbonate for texturization.It is proved that IPA …
Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang
Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang
Journal of Electrochemistry
A PEMFC electrode consisting of dual-layer catalyst layer(CL) was fabricated in this work.The outer CL was Nafion-free,while the inner CL was Nafion-bonded.The effects of Pt/C catalyst in the outer CL that did not contact with Nafion on the current generation in PEMFC electrodes were investigated.Cyclic voltammetric studies indicated that the Pt/C catalyst in the outer CL without direct contact with Nafion was still electrochemically active in taking part in the adsorption/desorption of hydrogen and the electrochemical oxidation/reduction of the oxygen-containing species occurring at the interface of "Pt/Nafion" in the inner CL.The polarization curves showed that the output voltage of the …
Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang
Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang
Journal of Electrochemistry
The combustion products of thermal battery used iron-heated powders have been studied.It is identified by X-ray diffraction(XRD) analysis that the main compositions of the combustion products are Fe、FeO and KCl.The transmission electron microscopy(TEM) shows a typical core-shell structure with un-reacted Fe particle core coated by FeO shell with a shell thickness of around 200 nm.The combusted iron-heated powders exhibit no metal property,which is contrast to previous assumption.Further measurement indicates that at the ambient temperature the combustion products show semiconductor property of the p-type with conductivity in the order of 103 S·cm-1,which is five order lower than that of the iron …
Synthesis Of The Lifepo_4 By Co Reduction:Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang
Synthesis Of The Lifepo_4 By Co Reduction:Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang
Journal of Electrochemistry
LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be an intermediate by analyzing the time-resolved XRD patterns.Kinetic study indicates that nucleation and their growth …
Preparations Of Composite Electrodes Of Pt With H_Xwo_3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li
Preparations Of Composite Electrodes Of Pt With H_Xwo_3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li
Journal of Electrochemistry
Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of noble metal in the application for fuel cell.
High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao
High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao
Journal of Electrochemistry
The Pt/C catalyst with high dispersion and high performance was prepared successfully by an organic colloidal method and small batch production(10g) of Pt/C catalyst has been realized.The particle sizes of the active components in the catalyst could be as small as 2.8 nm and the active surface area was up to 450 m2/g.A high performance membrane-electrode assembly(MEA) with surface area of 275 cm2 has been prepared by using the home-made catalyst with a catalyst coated membrane method invented in the lab,and a 5 kW stack has been assembled.The stack showed working 10 h at room temperature,atmosphere and without humidification.
Ceo_2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang
Ceo_2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang
Journal of Electrochemistry
In this paper,the cerium oxide(CeO2) nanoparticles were electrochemically deposited on a Pt electrode by potentiostatic deposition(psd) and potential pulse deposition(ppd) to form CeO2/Pt composite electrodes,CeO2/Pt(psd) and CeO2/Pt(ppd).The properties of the CeO2 were characterized by field emission scanning electron microscope(FESEM) and X-ray diffraction(XRD).The results showed that the CeO2 nanoparticles prepared by psd and ppd were homogeneous and dense.The methanol oxidation reaction(MOR) and oxygen reduction reaction(ORR) on the Pt electrode were enhanced with the introduction of CeO2 into Pt.In addition,the catalytic capability of the CeO2/Pt electrode can be further improved after dissolution of part of CeO2 on the composite electrode in H2SO4.The …
Effect Of Ch_2cl_2 On The Redox Behavior Of Ferrocene In Ionic Liquid Bmimpf6, Wei-Wei Ji, Li-Qun Xu, Dong-Mei Li, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang
Effect Of Ch_2cl_2 On The Redox Behavior Of Ferrocene In Ionic Liquid Bmimpf6, Wei-Wei Ji, Li-Qun Xu, Dong-Mei Li, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang
Journal of Electrochemistry
The effects of CH2Cl2 on the room temperature redox behaviors of ferrocene in ionic liquid,BmimPF6,were studied by cyclic voltammetry and AC Impedance.The results suggested that the presence of CH2Cl2,accelerated the dissociation of ionic liquid,leading to lower viscosity and larger ionic conductovity,hence,the diffusions of ferrocence in BmimPF6 were enhanced and the peak currents of redox reactions were increased.The changes in the double-layer structure at the electrode interface resulted in larger capacitance,which reduced the electrode recution resistances,accordirgly,the reaction kinetics of ferrocene were enhanced.
Electrochemical Properties Of Lamg_(11)Zr+Ni Composite, Xin-Chun Yan, Zi-Li Liu, Xin-Bo Liu
Electrochemical Properties Of Lamg_(11)Zr+Ni Composite, Xin-Chun Yan, Zi-Li Liu, Xin-Bo Liu
Journal of Electrochemistry
Using the LaMg11Zr as the initial alloy,the LaMg11Zr+Ni composite was prepared by mechanical alloying,and the effect of ball-milling time on the amorphous structure of alloy powers was characterized by X-ray diffraction(XRD).The amorphous(LaMg11Zr+Ni) alloy can be obtained after 20 h ball-milling,and has the best electrochemical capacity,electrochemical cycle stability.
Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang
Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang
Journal of Electrochemistry
A glucose oxidative electrode(GOD),EC-Pt/CNTs glucose oxidative electrode,was constructed by ethyl cellulose(EC) and Pt/CNTs.The sensitivity of the EC-Pt/CNTs GOD is 0.85 μA/mM in the concentration range of 0～4 mmol/L of glucose.After dipped in PBS(4℃) for 18 days,the activity of the EC-Pt/CNTs GOD can reach 80%.It is promising for the EC-Pt/CNTs GOD to be used to construct glucose biosensor.
Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He
Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He
Journal of Electrochemistry
After the pretreatment of nylon fabric by functional chitosan,the self-assembly technique was used in the process of activation before electroless plating to produce the CS-Pd membrane.The nanosized palladium particles with nanoscal have large relative surface and high catalyzed activity.Electromagnetic wave shielding fabric was prepared by electroless plating of Ni-P alloy with the activated fabric.The optimal process condition of CS finishing was given with the orthogonal and single factor experiments.The variation of fabric surface structure was characterized by SPM,SEM.Based on the Schelkunoff theory.The electromagnetic shielding effectiveness comes above 30 dB,which corresponds to shielding 96.0 percent of the electromagnetic wave or more.
Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan
Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan
Journal of Electrochemistry
Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.
Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu
Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu
Journal of Electrochemistry
A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was 1.0 × 10-11 mol/L.This …
Electrochemical Properties Of Sub-Micron Li_4ti_5o_(12) Powders, Chen-Shu Du, Hua-Bin Yang, Zuo-Xiang Zhou, Meng-Tao Wu, Lai-He Huang, Ning Xu
Electrochemical Properties Of Sub-Micron Li_4ti_5o_(12) Powders, Chen-Shu Du, Hua-Bin Yang, Zuo-Xiang Zhou, Meng-Tao Wu, Lai-He Huang, Ning Xu
Journal of Electrochemistry
The sub-micronmeteric Li4Ti5O12 powder material was successfully prepared through an improved solid-state synthesis process.The results of X-ray diffraction(XRD),scanning electron microscopy(SEM) and laser particle size distribution analysis showed that only a single spinel phase and a normal distribution pattern with the average size(D50) of 0.886μm could be observed.Due to the suitable partical size distribution,the Li4Ti5O12 powders showed a promising electrochemical performance.At the discharge current densities of 0.1C(16.5 mAh/g) and 5C,the discharge capacities reached 165 mAh/g and 107 mAh/g,respectively.Even at 10C,it still reached 54 mAh/g.
An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin
An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin
Journal of Electrochemistry
The silver nanoparticles were prepared by sodium citrate reduction of AgNO3.The nanoparticles were electrophoretic deposited on titanium,followed by the electrolytic deposition of hydroxyapatite(HAp).It is revealed,by the high-resolution transmission electron microscopy(HRTEM),that the diameters of nanosilver particles ranged from 5nm to 20nm.The XPS and XRD indicated the coating consisting of silver and HAp.According to the SEM images and antibacterial test,it is demonstrated that when the concentrations of the electrophoretic solution became higher more silver particles were depostited,and the antibacterial property improved.However,the particles aggregated on titanium greatly when the concentration exceeded a point,and the antibacterial activity declined.The optimum concentration for the antibacterial property …
Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie
Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie
Journal of Electrochemistry
The micromorphology of zinc electrodeposited at different currents in the flowing electrolyte was studied.It has been shown that the structure of the zinc became compacted with the increase of the charge current density and no zinc dendrite was presenct.A cell with 2Ah capacity was assembled and the charge-discharge test was performed.The results showed that the average charge voltage was 1.84V and the average discharge voltage was 1.65V.The high efficiencies can be achieved with an average coulombic efficiency of 97% and energy efficiency of 86% over 1000 cycles.
Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang
Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang
Journal of Electrochemistry
This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH4 concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 ℃ …
The Endpoint Determination In Hydrochloric Pickling By Electrochemistry Method, Shu-Jie Chen, Chun-Jie Ye, Hong-Liang Pan
The Endpoint Determination In Hydrochloric Pickling By Electrochemistry Method, Shu-Jie Chen, Chun-Jie Ye, Hong-Liang Pan
Journal of Electrochemistry
Pickling is an effective way to remove the oxide scale covered on steel materials.It is vital to determine the endpoint in the course of pickling process investigation.According to the reaction process of the oxide scale covered on hot-rolling strips with the hydrochloric acid,a method for determining the endpoint of pickling based on electrochemical principle was suggested.In the pickling experimentation of hot-rolling strips,an accurate precision can be obtained using this method.
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
Journal of Electrochemistry
The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density of 198mW/cm2 at 234mA/cm2.
Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo
Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo
Journal of Electrochemistry
The self-assembled films of tetradecylamine were formed on iron surface,and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique.Results indicated that longer immersion time would result in stronger inhibition ability of the films.The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%.When the tetradecylamine films were modified by dodecylthiol,the mixed films became denser and more stable,thus the inhibition ability increased remarkably.The η of the mixed films increased to 78.2%.
Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu
Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu
Journal of Electrochemistry
The electrochemical reductive behavior of 3,4,5,6-tetrachloro-2-trichloropyridine(heptachloropyridine) on silver electrode in the mixture of acetonitrile and water solutions containing TBAP was investigated by cyclic voltammetry.The influences of scan rate,concentration and temperature on the electrochemical behavior were discussed.It was shown that the reduction of heptachloropyridine on the silver electrode was a diffusion-controlled irreversible process.The diffusion coefficient of heptachloropyridine in the acetonitrile solution was 3.0×10-5 cm2/s.The mechanism of the dechloration of 3,4,5,6-tetrachloro-2-trichloropyridine was also discussed.