Physical Sciences and Mathematics Commons^™

Scanning Electrochemical Microscopy Reveals That Model Silicon Anodes Demonstrate Global Solid Electrolyte Interphase Passivation Degradation During Calendar Aging, Josefine D. Mcbrayer, Noah B. Schorr, Mila Nhu Lam, Melissa L. Meyerson, Katharine L. Harrison, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

Silicon is a promising next-generation anode to increase energy density over commercial graphite anodes, but calendar life remains problematic. In this work, scanning electrochemical microscopy was used to track the site-specific reactivity of a silicon thin film surface over time to determine if undesirable Faradaic reactions were occurring at the formed solid electrolyte interphase (SEI) during calendar aging in four case scenarios: formation between 1.5 V and 100 mV with subsequent rest starting at (1) 1.5 V and (2) 100 mV and formation between 0.75 V and 100 mV with subsequent rest starting at (3) 0.75 V and (4) 100 …

Gas Evolution Of A Nickel-Zinc Cell, Niklas Landgraf

MSU Graduate Theses

Batteries are a foundational technology in some of the industries most essential to humanity. Often, their advancement to achieve better performance impacts human lives positively. There are a wide variety of battery chemistries that have been utilized, and the differences in their properties have caused them to be used in many distinct niche applications. Nickel-Zinc (NiZn) batteries are desirable because of their recyclable materials, high cell voltage, and high cycle-life. However, it experiences undesirable shape-change of its electrode materials and gas production due to the electrolysis of the aqueous electrolyte. These can lead to a decrease in capacity over many …

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Which Factor Dominates Battery Performance: Metal Ion Solvation Structure-Derived Interfacial Behavior Or Solid Electrolyte Interphase Layer?, Hao-Ran Cheng, Zheng Ma, Ying-Jun Guo, Chun-Sheng Sun, Qian Li, Jun Ming

Journal of Electrochemistry

Solid-electrolyte interphase (SEI) layer formed on the electrode by electrolyte decomposition has been considered to be one of the most important factors affecting the battery performance. We discover that the metal ion solvation structure can also influence the performance, particularly, it can elucidate many phenomena that the SEI cannot. In this review, we summarize the importance of the metal ion solvation structure and the derived metal ion de-solvation behaviors, by which we can build an interfacial model to show the relationship between the interfacial behavior and electrode performance, and then apply to different electrode and battery systems. We emphasize the …

Understanding Rapid Intercalation Materials One Parameter At A Time, Wessel Van Den Bergh, Morgan Stefik

Faculty Publications

Demand for fast, energy-dense storage drives the research into nanoscale intercalation materials. Nanomaterials accelerate kinetics and can modify reaction path thermodynamics, intercalant solubility, and reversibility. The discovery of intercalation pseudocapacitance has opened questions about their fundamental operating principles. For example, are their capacitor-like current responses caused by storing energy in special near-surface regions or rather is this response due to normal intercalation limited by a slower faradaic surface-reaction? This review highlights emerging methods combining tailored nanomaterials with the process of elimination to disambiguate cause-and-effect at the nanoscale. This method is applied to multiple intercalation pseudocapacitive materials showing that the timescales …

Optimization And Development Of Sodium-Based Electrolytes For Energy Storage Devices, Jameson L. Tyler

Doctoral Dissertations

Energy storage devices have undergone development for decades. Much of the research is focused on the improvement of energy density by developing existing electrodes and investigating novel electrode materials. This has led to the overall improvement of traditional lithium-ion batteries, but also the discovery of new energy storage devices such sodium-ion batteries, redox flow batteries, solid electrolyte-based batteries, and many more. As the field expands, fundamental research is necessary to fully ascertain the validity of these novel systems for long term success. One of the most important components to all electrochemical energy storage devices such as batteries and supercapacitors is …

The Economics Of Residential Solar And Battery Storage: Analyzing The Impact Of The Joint Iou Proposal For Net Metering 3.0 In California, Candace E. Ybarra, Prashanth U. Nyer, John B. Broughton, Thomas A. Turk

Business Faculty Articles and Research

The California Public Utilities Commission (CPUC) is currently deciding on the structure of the next net metering program, which will determine how customers who install solar panels (and battery storage) under this new program will be compensated for excess energy that they export to the grid, and the additional fees that these solar customers will have to pay. The major investor-owned utility (IOU) companies in the state and some legislators have argued that the current net metering programs are far too generous to the customers and that they create an inequity by favoring the wealthy and causing a cost shift …

The Economics Of Battery Storage For Residential Solar Customers In Southern California, John B. Broughton, Prashanth U. Nyer, Candace E. Ybarra

Business Faculty Articles and Research

Battery storage coupled with solar panels became a consideration after the original net metering program in California (NEM 1.0) ended and gave way to the current net metering program (NEM 2.0). Under NEM 2.0, battery storage gives customers under time-of-use (TOU) rate plans the ability to store the excess electrical energy generated by their panels during sunlight hours (when electricity usage and resale rates are low) and then use that energy in the evening when rates are significantly higher. This reduces the amount of expensive electricity that the customer would have to purchase from the grid. It is widely expected …

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

Evaluation Of The Fuel Cell Performances Of Tio2/Pan Electrospun Carbon-Based Electrodes, Sema Aslan

Turkish Journal of Chemistry

Electrocatalytic effect of the untreated and TiO2+polyacrylonitrile (PAN) modified discarded battery coal (DBC) and pencil graphite electrodes (PGE) were evaluated in fuel cell (FC) applications. TiO2+PAN solution is coated on PGE and DBC electrodes by electrospinning. According to the FESEM and EDS characterizations, TiO2 and PAN nanofibers are found to be approximately 40 and 240 nm in size. TiO2+PAN/PGE showed the best FC performances with 2.00 A cm-2 current density and 5.05 W cm-2 power density values, whereas TiO2+PAN/DBC showed 0.68 A cm-2 current density and 0.62 W cm-2 power density values. Electrochemical characterizations of PGE and TiO2+PAN/PGE electrodes were …

Development Of An Advanced Zinc Air Flow Battery System (Phase 2), Jingyu Si

Theses and Dissertations

A zinc-air battery is the promising energy storage technology for large-scale energy storage applications due to its low cost, environmental friendliness, and high energy density. However, the electrically rechargeable zinc−air batteries suffer from poor energy efficiency and cycle life because of critical problems such as passivation, dendrite growth, and hydrogen evolution reaction. The proliferation of zinc−air batteries is limited.

The zinc-air flow battery combines the advantages of both a zinc-air battery and a redox flow battery. This combination permits the zinc-air flow battery to compete with the current leading battery technologies in the marketplace. A rechargeable Zn-air flow battery with …

Computational Materials Science And Engineering: Model Development And Case Study, Yihan Xu

Theses and Dissertations

This study presents three tailored models for popular problems in energy storage and biological materials which demonstrate the application of computational materials science in material system development in these fields. The modeling methods can be extended for solving similar practical problems and applications.

In the first application, the thermo-mechanical stress concentrated region in planar sodium sulfur (NaS) cells with large diameter and different container materials has been estimated as well as the shear and normal stresses in these regions have been quantified using finite-element analysis (FEA) computation technique. It is demonstrated that the primary failure mechanism in the planar NaS …

Battery Application Of Silver Molybdate Materials, Brendan Michael Godsel

Undergraduate Honors Papers

As the demand for renewable energy grows, the investigation of potential battery materials continues to progress hastily. Many devices and machines of present day are operated by battery technology, and their energy requirements warrant which kinds of batteries will power them. The battery in a phone requires hundreds, possibly thousands, of uses and needs to be able to recharge quickly. The battery in the implantable cardiac defibrillator (ICD), the battery by which this product was inspired, is only used once, but it must last years before it is replaced. The cathode of the ICD battery is comprised of a silver …

Software-Defined Infrastructure For Iot-Based Energy Systems, Stephen Lee

Doctoral Dissertations

Internet of Things (IoT) devices are becoming an essential part of our everyday lives. These physical devices are connected to the internet and can measure or control the environment around us. Further, IoT devices are increasingly being used to monitor buildings, farms, health, and transportation. As these connected devices become more pervasive, these devices will generate vast amounts of data that can be used to gain insights and build intelligence into the system. At the same time, large-scale deployment of these devices will raise new challenges in efficiently managing and controlling them. In this thesis, I argue that the IoT …

Highly Active Nanostructured Cos2/Cos Heterojunction Electrocatalysts For Aqueous Polysulfide/Iodide Redox Flow Batteries, Dui Ma, Bo Hu, Wenda Wu, Xi Liu, Jiantao Zai, Chen Shu, Tsegaye Tadesse Tsega, Liwei Chen, Xuefeng Qian, T. Leo Liu

Chemistry and Biochemistry Faculty Publications

Aqueous polysulfide/iodide redox flow batteries are attractive for scalable energy storage due to their high energy density and low cost. However, their energy efficiency and power density are usually limited by poor electrochemical kinetics of the redox reactions of polysulfide/iodide ions on graphite electrodes, which has become the main obstacle for their practical applications. Here, CoS₂/CoS heterojunction nanoparticles with uneven charge distribution, which are synthesized in situ on graphite felt by a one-step solvothermal process, can significantly boost electrocatalytic activities of I⁻/I₃⁻ and S²⁻/S_x²⁻redox reactions by improving absorptivity of …

Lithium Molybdate-Sulfur Battery., Ruchira Ravinath Dharmasena

Electronic Theses and Dissertations

Rechargeable energy storage systems play a vital role in today’s automobile industry with the emergence of electric vehicles (EVs). In order to meet the targets set by the department of energy (DOE), there is an immediate need of new battery chemistries with higher energy density than the current Li- ion technology. Lithium–sulfur (Li–S) batteries have attracted enormous attention in the energy-storage, due to their high specific energy density of 2600 Wh kg^-1 and operational voltage of 2.0 V. Despite the promising electrochemical characteristics, Li-S batteries suffer from serious technical challenges such as dissolution of polysulfides Li₂S_{x …}

Soc Prediction Of Battery Based On Improved Online Kernel Extreme Learning Machine, Yukun Sun, Manman Li, Yonghong Huang

Journal of System Simulation

Abstract: In order to conduct an accurate and fast online prediction for the state of charge (SOC) of battery, an improved online kernel extreme learning machine (IO-KELM) algorithm is proposed. In this work, a prediction model is presented with charge voltage, current and surface temperature as inputs and SOC of battery as output. The IO-KELM adopts Cholesky factorization to extend the kernel extreme learning machine (KELM) from offline mode to online mode. Meanwhile, the output weights of the network are updated by successive join of the new samples, and the matrix inverse operation is replaced with arithmetic. Hence, the generalization …

Pv-Based Off-Board Electric Vehicle Battery Charger Using Bidc, Ankita Paul, Krithiga Subramanian, Sujitha N

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, the use of renewable energy sources is increasing drastically in several sectors, which leads to its role in the automobile industry to charge electric vehicle (EV) batteries. In this paper, a photovoltaic (PV) array-fed off-board battery charging system using a bidirectional interleaved DC-DC converter (BIDC) is proposed for light-weight EVs. This off-board charging system is capable of operating in dual mode, thereby supplying power to the EV battery from the PV array in standstill conditions and driving the DC load by the EV battery during running conditions. This dual mode operation is accomplished by the use of …

Analysis Of Electrochemical Noise In Nicd Batteries Throughout Their Lifetime, Burak Ülgüt

Turkish Journal of Chemistry

Electrochemical noise measurements have been applied to electrochemical systems that show stochastic behavior. The standard area of study that benefits from this stochastic analysis is localized corrosion modes like pitting and crevice corrosion. Application of electrochemical noise measurements to battery systems, though rare, is recently becoming more popular. The present contribution first establishes a method of analyzing electrochemical voltage noise data for NiCd batteries, then follows four samples of batteries in terms of voltage noise throughout their lifetimes. The noises exhibited by battery systems are small, but finite. This noise is expected to be due to variations in the electrochemistry …

Structure-Property Relationships Of Organic Electrolytes And Their Effects On Li/S Battery Performance, Mohammad Kaiser, Shulei Chou, Hua-Kun Liu, Shi Xue Dou, Chunsheng Wang, Jiazhao Wang

Australian Institute for Innovative Materials - Papers

Electrolytes, which are a key component in electrochemical devices, transport ions between the sulfur/carbon composite cathode and the lithium anode in lithium-sulfur batteries (LSBs). The performance of a LSB mostly depends on the electrolyte due to the dissolution of polysulfides into the electrolyte, along with the formation of a solid-electrolyte interphase. The selection of the electrolyte and its functionality during charging and discharging is intricate and involves multiple reactions and processes. The selection of the proper electrolyte, including solvents and salts, for LSBs strongly depends on its physical and chemical properties, which is heavily controlled by its molecular structure. In …

Implementation Of A Personal Area Network For Secure Routing In Manets By Using Low-Cost Hardware, Himadri Nath Saha, Rohit Singh, Debika Bhattacharyya, Pranab Kumar Banerjee

Turkish Journal of Electrical Engineering and Computer Sciences

Presently, mobile ad hoc networks (MANETs) are being used extensively in the defense, private, domestic, etc. fields and each of these emulates a personal area network (PAN). A MANET does not require any infrastructure; moreover, it can behave as a mobile network. These features have boosted the popularity of MANETs in the community. As more and more fields become dependent on MANETs, the system needs to be more energy aware and low cost. To commercialize MANETs, the routing protocols need to be lightweight, secure, and energy efficient, and the hardware on which it is to be implemented should be low …

Lignin-Based Li-Ion Anode Materials Synthesized From Low-Cost Renewable Resources, Nicholas William Mcnutt

Doctoral Dissertations

In today’s world, the demand for novel methods of energy storage is increasing rapidly, particularly with the rise of portable electronic devices, electric vehicles, and the personal consumption and storage of solar energy. While other technologies have arguably improved at a rate that is exponential in accordance with Moore’s law, battery technology has lagged behind largely due to the difficulty in devising new electric storage systems that are simultaneously high performing, inexpensive, and safe.

In order to tackle these challenges, novel Li-ion battery anodes have been developed at Oak Ridge National Laboratory that are made from lignin, a low-cost, renewable …

A New Paradigm Of Maximizing The Wind And Solar Penetration– A Economical Assessment, Yuming Chen

Theses and Dissertations

Wind and solar energies are the most potential and widely-used renewable energies. But in most cases these energies cannot be maximized because of transmission line capacity and their remote location. Therefore, this thesis proposes a new paradigm which using battery transportation and logistics instead of transmission line, to maximize wind and solar energies. The main focus of this work is to investigate the economical feasibilities of this new paradigm.

In the first part, different models and application are presented. The purpose is finding an appropriate model which can make full use of existing grid resources such as transmission line and …

Nano-Structured Electrocatalysts For High Performance Lithium Sulfur Batteries, Negar Mosavati

Wayne State University Dissertations

Ni nanoparticles has been investigated as a carbon-free cathode material for dissolved polysulfide Li-S battery. A series of Ni nanoparticles with nominal particle size of 20, 40, and 100 nm have been used as electrocatalysts, and the effect of particle size on Li-S battery performance has been investigated. In addition, graphene has been chosen as a support to anchor the Ni nanoparticles, and the synergetic effect of carbon material and Ni nanoparticles on Li-S battery electrochemical performance has been studied. The results indicated there is a strong particle size effect. Ni/graphene electrode exhibits a capacity of 753 mAh g-1 sulfur …

A High Energy Density Solar Rechargeable Redox Battery, Mohammad Ali Mahmoudzadeh, Ashwin R. Usgaocar, Joseph Giorgio, David L. Officer, Gordon G. Wallace, John D. W Madden

Australian Institute for Innovative Materials - Papers

An integrated solar energy conversion and storage system is presented using a dye sensitized electrode in a redox battery structure. A stable discharge voltage is shown with high areal energy storage capacity of 180 W h cm-2 by choosing iodide/polysulfide as the pair of active materials matched with permeable porous electrodes. The solar rechargeable battery system offers a higher round-trip efficiency and potential cost savings on fabrication compared to individual devices.

A High-Performance Rechargeable Mg2+/Li+ Hybrid Battery Using One-Dimensional Mesoporous Tio2(B) Nanoflakes As The Cathode, Shuojian Su, Yanna Nuli, Zhenguo Huang, Qi Miao, Jun Yang, Jiulin Wang

Australian Institute for Innovative Materials - Papers

Mg2+/Li+ hybrid batteries have recently been constructed combining a Mg anode, a Li+-intercalation electrode, and an electrolyte containing both Mg2+ and Li+. These batteries have been reported to outperform all the previously reported magnesium batteries in terms of specific capacity, cycling stability, and rate capability. Herein, we report the outstanding electrochemical performance of Mg2+/Li+ hybrid batteries consisting of a one-dimensional mesoporous TiO2(B) cathode, a Mg anode, and an electrolyte consisting of 0.5 mol L-1 Mg(BH4)2 + 1.5 mol L-1 LiBH4 in tetraglyme. A highly synergetic interaction between Li+ and Mg2+ ions toward the pseudo-capacitive reaction is proposed. The hybrid batteries …

A Methodical Approach For Fabrication Of Binder-Free Li2s-C Composite Cathode With High Loading Of Active Material For Li-S Battery, Mohammad Kaiser, Xin Liang, Hua-Kun Liu, S X. Dou, Jiazhao Wang

Australian Institute for Innovative Materials - Papers

Lithium sulfide (Li2S), which has a theoretical capacity of 1166 mA h/g, is considered as a promising cathode material for the Li-S battery. The electrochemical performance of microsized Li2S is impaired, however, by its low electrical conductivity as well as first cycle high activation potential problem. In this work, microsized Li2S powder had been ball-milled with different carbon sources to synthesize Li2S-C composites as well as to find the suitable carbon sources, which were then capillary-deposited in three-dimensional multi-layered Ni foam from a dioxolane-containing mixture to fabricate a binder-free Li2S-C composite cathode. A large amount of active material (∼5 mg/cm2) …

Sandra Helps You Learn: The More You Walk, The More Battery Your Phone Drains, Chulhong Min, Chungkuk Yoo, Inseok Hwang, Seungwoo Kang, Youngki Lee, Seungchul Lee, Pillsoon Park, Changhun Lee, Seungpyo Choi Choi

Research Collection School Of Computing and Information Systems

Emerging continuous sensing apps introduce new major factors governing phones’ overall battery consumption behaviors: (1) added nontrivial persistent battery drain, and more importantly (2) different battery drain rate depending on the user’s different mobility condition. In this paper, we address the new battery impacting factors significant enough to outdate users’ existing battery model in real life. We explore an initial approach to help users understand the cause and effect between their physical activity and phones’ battery life. To this end, we present Sandra, a novel mobility-aware smartphone battery information advisor, and study its potential to help users redevelop their battery …

Effects Of Temperature On The Crystal Structure Of Lithium-Lanthanum Zirconate, Mir Iqbal

DePaul Discoveries

ABSTRACT Lithium-lanthanum zirconate (LLZ) can potentially be used as a solid electrolyte in lithium-metal batteries. Li-metal batteries offer superior charge capacities and higher energy densi-ties compared to currently used Li-ion batteries. Lithium is highly reactive, which can be dangerous in consumer electronics, but a layer of LLZ electrolyte inserted alongside the Li-metal electrode greatly stabilizes its reactivity. The cubic phase structure of LLZ (Li₇La₃Zr₂O₁₂) has the highest conductivity of its crystalline phases, making it the most promising crystal form of LLZ for this application. Samples of LLZ were doped with different amounts …

A Custom Battery For Operando Neutron Powder Diffraction Studies Of Electrode Structure, Wei Kong Pang, Vanessa Peterson

Australian Institute for Innovative Materials - Papers

Structure-property relations are central to understanding functional materials, and for battery research the use of neutron powder diffraction to reveal the atomistic and molecular-scale origin of battery performance characteristics is often essential. Although operando experiments of this kind are increasingly common as neutron sources and instrumentation advance, these experiments are hindered by the often large barrier presented by the preparation of whole batteries that yield a neutron diffraction signal from the electrode of interest that is sufficient to extract detailed structural information. This article presents a custom battery that is specifically designed for operando neutron powder diffraction. The battery is …