Dental Materials Commons^™

Mathematical Modeling For Dental Decay Prevention In Children And Adolescents, Mahdiyeh Soltaninejad

Dissertations

The high prevalence of dental caries among children and adolescents, especially those from lower socio-economic backgrounds, is a significant nationwide health concern. Early prevention, such as dental sealants and fluoride varnish (FV), is essential, but access to this care remains limited and disparate. In this research, a national dataset is utilized to assess sealants' reach and effectiveness in preventing tooth decay, particularly focusing on 2nd molars that emerge during early adolescence, a current gap in the knowledge base. FV is recommended to be delivered during medical well-child visits to children who are not seeing a dentist. Challenges and facilitators in …

The Creation Of An Innovative Oral Health Assessment Survey, Purna Patel

Electronic Theses, Projects, and Dissertations

Background Oral health is an important factor to maintain overall health and well-being, such as students’ knowledge, attitude, and practice. Currently, there is a limited amount of research related to oral health awareness in college students.

Objective The purpose of the study was to define the importance of oral health and investigate college students’ understanding related to oral health. Moreover, research shows how students are protecting their oral hygiene.

Results: The outcomes revealed the college student's awareness and understanding of oral health. According to the survey questions, students believe that dental health is a significant aspect of overall health management. …

Enhancing Dental Aligners With Direct 3d Printing Manufacturing, Erin Clark, Lauren Ickes, Tyler Madison

Williams Honors College, Honors Research Projects

Replacement of thermoforming with direct 3d printed aligners, molding appliances for dental and alveolar movement. Currently the process involved requires 3d printing models and plastic thermoforming, trimming and polishing to fabricate the end product. If possible a product that could be 3d printed that had stress retention, crack resistance, and stain resistance properties delivered in thickness between .030 and .040 inches.

A Comparison Of The Antimicrobial Efficacy Of Silver Diamine Fluoride And Silver Nitrate: An In Vitro Study, Nicholas L. Luke

Theses and Dissertations

A COMPARISON OF THE ANTIMICROBIAL EFFICACY OF SILVER DIAMINE FLUORIDE AND SILVER NITRATE: AN IN VITRO STUDY

By: Nicholas L Luke, D.D.S.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University.

Virginia Commonwealth University, May 2018

Thesis Advisor: William O. Dahlke Jr., D.M.D.

Pediatric Dentistry, Department Chair

Purpose: To determine the antimicrobial efficacy of SDF and SN/NaF.

Methods: Three bacterial species were combined to create an in vitro biofilm. Treatment was completed with SN, SN/NaF, SDF, SDF½ or untreated (control).

Results: The untreated group demonstrated significantly higher …

Effects Of Flash-Free Technique On Plaque Retention, White Spot Lesions, And Bracket Failure: A Randomized Clinical Trial, Payam Ishani Afousi

Theses & Dissertations

A side effect of orthodontic treatment is the development of white spot lesions (WSLs). This thesis attempted to evaluate the effects of the use of APC™ Flash-Free (FF) and conventional adhesives in bonding of orthodontic brackets on plaque formation and retention, WSL development, and bracket failure in-vivo. This was accomplished by collecting plaque samples from around orthodontic appliances and analyzing them using ATP-driven bioluminescence; scanning enamel surfaces using the Canary System™ to evaluate WSL development, and counting the number of spontaneous debonding of brackets of the 4 maxillary incisors in the first 6 months of treatment. It was found …

Comparison Of Microleakage In Three Sealant Placement Protocols Vs. The Enamel Loc System, Audrey T. Sheu

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To evaluate sealant microleakage using four different application techniques.

METHODS: The four application techniques evaluated were acid etch only, Adper L-Pop bonding, Optibond bonding, and Enamel Loc One-Step Sealant. Sixty-four extracted third molar teeth were assigned on one of four application techniques (n=16) and Clinpro sealants applied according to the manufacturer's instructions. The teeth were thermocycled for 500 cycles, dyed, and embedded in resin. The samples were then sectioned and evaluated for microleakage on the buccal and lingual surfaces. Statistical methods employed to analyze the data were the Kruskal-Willis rank test and the Mann-Whitney U test.

RESULTS: No significant …

Veneer Failure On Preveneered Primary Posterior Stainless Steel Crowns, Matthew H. Gustafsson

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: The purpose of this study was to determine the amount of force required to fracture or dislodge the veneered facings from three veneered lower primary molar stainless steel crowns (SSC) and to characterize the veneer failures.

METHODS: The following veneered crowns were used in this study: NuSmile crowns, Kinder Krowns, and EC crowns. Twenty lower right primary first molar crowns were used from each manufacturer, for a total of 60 crowns. All crowns were cemented with glass ionomer cement to a custom fabricated die. Twenty-four hours following cementation, each die with the cemented crown was placed into a custom …

Comparison Of Laser And Phosphoric Acid Etching On Sealant Shear Bond Strength, Seth David Latimer

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To compare the effect of traditional phosphoric acid etching with Er,Cr:YSGG laser enamel etching on the shear bond strength of sealant material.

METHODS: Extracted healthy third molars were mounted in acrylic exposing the flattest surface available. Three groups of twenty teeth were used to evaluate traditional acid etching with 37% phosphoric acid as a control group as well as two different laser settings. The sealant material was attached using specialized jigs and then subjected to shear bond strength testing utilizing the ultradent method (MTS machine). Statistical methods employed were the Kruskal-Wallis rank test and the Mann-Whitney U test.

RESULTS: …

The Effect Of Calcium Hydroxide Pastes On Root Dentin Fracture Resistance, Kurt W. Sturz

Loma Linda University Electronic Theses, Dissertations & Projects

Calcium hydroxide is a common intracanal medicament used in the treatment of immature teeth that have been subjected to trauma or decay prior to root canal therapy. The effect of calcium hydroxide on immature root dentin is important. One area of concern is the effect that calcium hydroxide has on the fracture resistance of an immature tooth. It is the aim of this study to compare the effect of four different commercially available calcium hydroxide pastes on the fracture resistance of bovine teeth. Seventy-five freshly extracted, intact bovine incisors were prepared according to a modified Haapasalo and Orstavik technique. Each …

Vital Pulp Therapy With Mineral Trioxide Aggregate: An Outcomes Study, Heather H. Lauer

Loma Linda University Electronic Theses, Dissertations & Projects

Mineral trioxide aggregate (MTA) is used in a variety of endodontic procedures. MTA is proven to provide good marginal adaption to dentin, to be biocompatible, and to stimulate dentin bridge formation through animal studies. These properties make MTA a potentially useful material to be used in vital pulp therapy. Clinical data on the use of MTA as a vital pulp medicament is sparse. The purpose of this study was to evaluate the clinical outcome of vital pulp therapy using MTA as the pulp medicament. Inclusion criteria for patient selection for recall was based on pulp treatment necessary from carious pulp …

The Effect Of Topical Fluorides On The Microleakage Of Sealants, N. Jared Nation

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: The purpose of this study was to evaluate the possible microleakage found in two groups of sealants; a group bonded with a dentin bonding agent (DBA), and a group bonded without a DBA after exposure to a variety of topical fluorides.

Materials and Methods: Extracted, human molars were placed into 8 groups. Half of the groups contained sealants that were bonded with a DBA and the other remaining groups of sealants were bonded without a DBA. There were two control groups, one that had sealants bonded with a DBA and the other had sealants bonded without a DBA, but …

The Effect Of Naocl, Ca(Oh)2, Mta And Mtad On Root Dentin Fracture Resistance, Sunil Ilapogu

Loma Linda University Electronic Theses, Dissertations & Projects

Various materials are used for the treatment of immature teeth that have been subjected to trauma or decay. It is not well established what effect these materials may have on the immature root dentin. A concern would be the resistance to fracture of the remaining root dentin. The purpose of this study was to compare the resistance of fracture of bovine teeth treated with sodium hypochlorite, calcium hydroxide, gray MTA and gray MTA in conjunction with MTAD after certain periods of time. One hundred and ninety five freshly extracted, intact bovine incisors were prepared using a modified Haapasalo and Orstavik …

The Radiopacity Of 29 Resin Restorative Materials Compared To Enamel, Peter Lubisich Iv

Loma Linda University Electronic Theses, Dissertations & Projects

The radiodensity of a composite resin can greatly influence a clinician's ability to analyze a restoration for failure. The purpose of this study was to determine the relative radiopacities of 29 resin restorative materials compared to enamel, and to verify the comparable radiopacity between shades of 23 of the restorative composite resin materials. Composite resin discs measuring >5mm in diameter and 2 mm in thickness were made and polymerized. Radiographs were taken of the composite resin discs, which included an aluminum step wedge for calibration and a densitometer was used to measure the radiodensity of the composite resin samples. The …

Evaluation Of Three Bonding Agents In The Repair Of Fractured Veneered Stainless Steel Crowns, Jennifer Liane Hoffer

Loma Linda University Electronic Theses, Dissertations & Projects

Dentists have long been challenged with finding an esthetic yet durable treatment option to restore badly carious anterior teeth. Veneered stainless steel crowns have become one of these options, but these restorations often return with the veneer fractured. To help restore esthetics, the crown may either be replaced or the veneer must be repaired. The purpose of this study was to evaluate the use of three bonding agents (PQ1, C&B Metabond, and Panavia) and one restorative material (Filtek Z250, 3M) in the repair of these fractured stainless steel crown veneers. The clinical significance is to determine the best methods of …

Microleakage Of Various Restorative Materials Used For Preventive Resin Restorations, Jenny Chung Lee

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: This research was designed to compare the microleakage of various restorative materials used for preventive resin restorations and two methods of cavity preparation. The purpose of this study was: (1) to compare microleakage of four different restorative materials using two different type of preparation methods (bur and air particle abrasion) and (2) whether the use of a pit and fissure sealant over the restoration decreases microleakage.

Methods: One hundred and twenty eight, permanent human molars were randomly divided into four groups and restored with four restorative materials. Each group had been randomly divided into two subgroups. The teeth in …

Evaluating Pit And Fissure Sealant Materials When Used As Bonding Agents In Preventive Resin Restorations, Paul Shields Gerber

Loma Linda University Electronic Theses, Dissertations & Projects

Preventive resin restorations (PRR) are an increasingly popular alternative to the traditional amalgam restoration for small occlusal caries in posterior teeth. The technique for placing the PRR was first suggested by Simonsen (1980) and involved a minimal removal of tooth structure. After preparation, the tooth is etched, followed by an application of a bonding agent, filled with composite, and then sealed with a pit and fissure sealant. In an attempt to simplify the protocol of the PRR this study was designed to determine if pit and fissure sealant material could serve a dual role and eliminate the need for a …

Mutagenecity Of Formocresol, Glutaraldehyde, Ferric Sulfate And Aluminum Chloride : Materials Used In Therapeutic Pulpotomies, Adolfo Barrera

Loma Linda University Electronic Theses, Dissertations & Projects

Ferric sulfate (Astringedent) and aluminum chloride (Hemodent) have been proposed as possible medicaments for use in primary teeth for therapeutic pulpotomies.

There is little information in the literature about the biologic properties of these medicaments.

The purpose of this study was to evaluate the mutagenic response of the ferric sulfate and aluminum chloride and compare them with glutaraldehyde (1.5%, 1% and 0.5% concentration) and formocresol (2%, 0.75%, 0.01% and 0.005% concentration). TA98 and TA1535 strain were used in the Ames test to assess mutagenecity. Neither ferric sulfate nor aluminum chloride exhibited mutagenic potential, in comparison with glutaraldehyde and formocresol, which …