Comparing Program Compatibility For Dental Operators Between Different In-Office Clear Aligners Software, Karim Ibrahim Hammam, Essam Nassef, Mostafa Al Dawltaly

Future Dental Journal

Aim: The aim of the present study was to compare program compatibility for dental operators between different in office clear aligners software: (3D Maestro,3shape, BlueSky bio, Plainmeca). Materials and methods: 4 in office clear aligners software: (3D Maestro,3shape, BlueSky bio, Plainmeca) were used. Ten orthodontists were recruited for the evaluation process, A total of 48 casts were used including upper and lower arches for each case. Each orthodontist made a check mark on each option in the pre-made scoring template.A check mark with YES was given a One point, and a check mark with NO was given Zero point. Results: …

Assessment Of External Apical Root Resorption Following En-Masse And Two Steps Retraction In Maxillary Protrusion Cases: A Randomized Controlled Clinical Trial, Aya Ahmed El Ashwal, Heba Mohamed Dehis, Faten Eid

Future Dental Journal

Aim: The aim of this study was to investigate the degree of external apical root resorption (EARR) following En-masse retraction (EM) and compared it to two steps retraction technique (TS) using friction mechanics.

Materials and Methods: Thirty adult female with maxillary protrusion were randomly allocated by a computer sequence generator with 1:1 allocation ratio. EM group (mean age = 17.7 ± 1.89 years) and TS group (mean age = 17.7 ± 1.77 years). Mini-screws were inserted followed by first premolars extraction then randomization was accomplished. Patients received treatment with either EM procedure or TS to close the extraction spaces after …

The Effectiveness Of Resin-Modified Glass Ionomer Varnish In Preventing White Spot Lesions During Fixed Appliance Orthodontic Therapy: An In Vitro Study, Bradley Herman

Theses & Dissertations

The purpose of this investigation was to evaluate the efficacy of a glass ionomer varnish in preventing demineralization of enamel adjacent to and some distance away from an orthodontic bracket. Forty extracted human molars were divided into four different treatment groups (varnish in distilled water, varnish in acetic acid, enamel in acetic acid, and enamel in distilled water). Two 3 x 3 mm graphite windows were drawn on the tooth, one adjacent to the bracket and one 3 mm away from the first window, indicating the scanning area. Varnish was applied to the teeth in the varnish groups and all …

Evaluation Of Fit For 3d Printed Retainers As Compared To Thermoform Retainers, David J. Cole

Theses and Dissertations

ABSTRACT

EVALUATION OF FIT FOR 3D PRINTED RETAINERS AS COMPARED TO THERMOFORM RETAINERS

By David Cole, D.M.D.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University

Thesis Directors: Eser Tüfekçi, D.D.S., M.S., Ph.D., M.S.H.A.

Professor, Department of Orthodontics

Sompop Bencharit, D.D.S., M.S., Ph.D.

Associate Professor and Director of Digital Dentistry, Department of General Practice

Introduction: Despite recent advances in three-dimensional (3D) printing, little information is available on 3D printed retainers

Methods: Three reference models were used to fabricate traditional vacuum formed, commercially-available vacuum formed, and 3D printed …

An Investigation Of Surface Characteristics Of Enamel Treated With Infiltrative Resin: A Scanning Electron Microscopy Study, Danielle E. Easterly

Theses and Dissertations

AN INVESTIGATION OF SURFACE CHARACTERISTICS OF ENAMEL TREATED WITH INFILTRATIVE RESIN: A SCANNING ELECTRON MICROSCOPY STUDY

Danielle E. Easterly, Doctorate of Dental Surgery.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University.

Virginia Commonwealth University. 2017.

Director: Dr. Eser Tüfekçi

D.D.S., M.S., Ph.D., M.S.H.A.

Objective: To evaluate the microstructural changes of a resin infiltrant (ICON®, DMG America LLC, Englewood, NJ) after six months of simulated toothbrushing.

Materials and Methods: Ten extracted third molars (n=10) were collected. Artificial white spot lesions were created and resin applied. Environmental SEM …

Mechanical Properties Of Copper-Nickel-Titanium Archwires, Margaret Amelia Rosen

Master's Theses (2009 -)

Introduction: The initial phase of orthodontic therapy relies on flexible wires, usually composed of a nickel-titanium alloy, to apply a substantially constant load during tooth movement. Copper has been added to nickel-titanium archwires, resulting in an alloy with potential clinical advantages such as a lower stress hysteresis. Many orthodontic companies claim that their copper-nickel-titanium manufacturing process allows for the production of more consistent transition temperatures in the wires, allowing the orthodontist to customize treatment to various patients based on the force level needed. There are currently many manufacturers of these wires, creating a wide range of copper-nickel-titanium archwires from which …

Thermal Properties Of Copper Nickel-Titanium Orthodontic Archwires, Joshua Gilbert

Master's Theses (2009 -)

Introduction: Copper Nickel-Titanium (CuNiTi) is a relatively new composition of Nickel-Titanium (NiTi) archwires that was originally patented in 1991 as part of the Ormco line of wires. The patent has now recently expired and many other orthodontic companies are making their own CuNiTi wires. Advertisement claims have focused on the laboratory benefits of adding Copper (Cu) to the NiTi, however few independent laboratory testings have been conducted on these new wires to verify claims. The purpose of this study was to conduct thermal analysis of CuNiTi for all currently available wires in two Austenite Finish (Af) variants and two commonly …

Influence Of Fluoride And Stress On The Mechanical Properties Of Nickel-Titanium Coils, Jennifer Ann Fehrman Roloff

Master's Theses (2009 -)

Objective: The objective of this study was to determine the influence of fluoride and stress on the mechanical properties of nickel-titanium open coil springs. Materials and Methods: Sentalloy nickel-titanium open coil springs (15 mm length) were divided into five groups. A control group was tested mechanically in as-received condition. The other four experimental groups were exposed to artificial saliva (Fusayama-Meyer solution) at 37oC for 12 weeks in a 2x2 factorial design with fluoride exposure and stress (compression) as the two factors. Those springs which were under compression were held at 5 mm in length for the entirety of the testing …

Influence Of Fluoride And Stress On The Electrochemical Properties Of Nickel-Titanium Coils, Ashley Barnes

Master's Theses (2009 -)

The aim of this study was to examine the effects of fluoride and stress on the electrochemical properties of nickel-titanium coils. Forty Dentsply GAC NiTi coils were divided into four groups of ten and individually tested. Twenty coils were placed in a solution of artificial saliva, where ten of the twenty were compressed and the other ten were not stressed. The other twenty coils were placed in a 1500 ppm NaF solution, where ten were compressed and ten were not. The coils were connected to a computer driven potentiostat and three tests were conducted: open circuit potential monitoring for 2 …

Mechanical Properties And Patient Perceptions Of Commonly Used Clear Aligner Systems As-Received And After Clinical Use, Lauren Evan Montoure Teske

Master's Theses (2009 -)

Background/Objectives: This study aimed to investigate the viscoelastic properties of two clear aligner systems, Invisalign (Align Technology, Inc, Santa Clara, CA, USA) and Simpli5 (Allesee Orthodontic Appliances, Sturtevant, WI, USA), and determine if there was a difference after use. A survey assessed patients’ perceptions of the aligner material and post-treatment satisfaction. Materials/Methods: Mandibular aligners were collected from two patients after 2-3 weeks of use (n=6). Duplicate, unused aligners were obtained for each patient (n=6). Dynamic mechanical analysis (DMA) characterized the viscoelastic properties of the materials. Three tests were done on separate specimens: frequency scan (0.1-10 Hz under 25 μm displacement …

An Investigation Into The Bonding Properties Of New Generation Ceramic Brackets As Compared To A Stainless Steel Bracket, Ami Inoue

Master's Theses (2009 -)

Introduction: More patients are seeking esthetic alternatives for their orthodontic treatment options, which has led to increased use of ceramic brackets in recent years. These brackets were marketed before independent scientific research was completed. Many of the early ceramic brackets used a silane coupling agent to allow for a chemical bond between the bracket and the adhesive resin. Early reports from clinicians of increased bond strengths and iatrogenic tooth damage after bracket removal were common. Manufacturers have made changes to their base designs, relying more on mechanical retention for bond strength. The goal of this study was to test the …

Frictional Forces Of A Fixed, Esthetic Orthodontic Appliance System, Brady Michael Nance

UNLV Theses, Dissertations, Professional Papers, and Capstones

Purpose: The demands of an all esthetic fixed orthodontic appliance system are ever increasing in today's world. Frictional values of an esthetic, fixed orthodontic appliance system are needed to evaluate their clinical effectiveness for orthodontic treatment. The aim of this study is to evaluate the frictional values of various esthetic orthodontic archwires ligated to an esthetic orthodontic bracket.

Methods: Three types of stainless steel and nickel titanium alloy (niti) esthetic orthodontic archwires (epoxy, poly, plastic) in four sizes (.016, .018, .017 x .025, .019 x .025 inches) were ligated to both a stainless steel bracket system and a ceramic (esthetic) …

Effect Of Gingival Margin Design On Retention Of Thermoformed Orthodontic Aligners, Daniel P. Cowley

UNLV Theses, Dissertations, Professional Papers, and Capstones

Purpose: The aim of this study was evaluate the effect of gingival margin design (scalloped vs. straight cut at gingival zenith vs. straight cut 2mm above gingival zenith) on the retention of thermoformed aligners. Retention of aligners is a critical requirement for efficient tooth movement.

Methods: Two thermoform aligner materials were used, Invisacryl A and Invisacryl C, in 0.040 mil (1mm) thickness. Six aligner designs were fabricated for each of the two aligner materials (12 total aligner designs). Aligner designs are scalloped, straight cut at gingival zenith (0mm), and straight cut 2mm above gingival zenith on a model with attachments. …

Effect Of Toothbrush Abrasion On Frictional Resistance Of Aesthetic Orthodontic Archwires, Stephen Alexander Yamodis

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fixed orthodontic appliances (braces) are one of the most widely used appliances to correct malocclusion, however many patients prefer less metal display. To meet this demand more esthetically pleasing brackets and archwires have been developed. These esthetic components are often clear, white or tooth colored. Coatings of various types are commonly used to produce an esthetic archwire. However, these coating materials tend to wear and degrade, which may cause binding and increased resistance to friction, thereby potentially reducing the efficiency of tooth movement. Therefore, in vitro testing of tooth brush abrasion on frictional resistance of various aesthetic archwires was tested. …

Practicing Orthodontists' Use And Perceived Efficacy Of Self-Ligating Brackets, John-David Beuhler

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction.

The purpose of this study was to compare perceptions of efficacy and efficiency of Self-Ligating Brackets vs. conventional brackets between practicing Orthodontists and Orthodontic Residents.

Methods.

Cross-sectional survey research using a three-wave emailing of addresses from the current American Association of Orthodontists directory. The directors of all orthodontic residency programs in the US were asked to also distribute to all residents. The survey included five sections: (1) respondents' experience, (2) factors that influence, (3) positive or negative factors, (4) the perceived efficiency/efficacy, and (5) demographics. A 39% response rate (N=707) was obtained.

Results.

Over half (51.8%) …

Bacterial Adherence Of Streptococcus Mutans And Lactobacillus Acidophilus On Poly-Methyl Methacrylate And Thermoplastic Polypropene Used In Orthodontic Retention, Lindsay Ann Pfepper

UNLV Theses, Dissertations, Professional Papers, and Capstones

Retention is required in the majority of orthodontic patients throughout the remainder of their life. The two primary removable appliances are known as the traditional Hawley retainer or the vacuum formed retainer. These appliances were developed to maintain the position of the dentition without sacrificing oral health. The orthodontic population is at a higher risk for caries due to plaque accumulation from poor diet, suboptimal oral hygiene and often lack of motivation. These two retainers occupy different niches and are comprised of different materials; therefore the retainers' effect on oral health could be very different. An understanding of which bacteria …