Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 9 of 9
Full-Text Articles in Aquaculture and Fisheries
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown
Kurt A. Rosentrater
Increases in global aquaculture production, compounded with limited availabilities of fish meal for fish feed, has created the need for alternative protein sources. Twin-screw extrusion studies were performed to investigate the production of nutritionally balanced feeds for juvenile yellow perch (Perca flavescens). Five isocaloric (~3.06 kcal/g) ingredient blends, adjusted to a target protein content of 36.7% db, were formulated with 0%, 10%, 20%, 30%, and 40% distillers dried grains with solubles (DDGS) at an initial moisture content of 5–7% db, with appropriate amounts of fish meal, fish oil, whole wheat flour, corn gluten meal, and vitamin and mineral premixes. During …
Single-Screw Extrusion Modeling Effects On Extrusion Processing Parameters And Physical Properties Of Ddgs-Based Nile Tilapia ( Oreochromis Niloticus ) Feeds, Ferouz Y. Ayadi, Parisa Fallahi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan
Single-Screw Extrusion Modeling Effects On Extrusion Processing Parameters And Physical Properties Of Ddgs-Based Nile Tilapia ( Oreochromis Niloticus ) Feeds, Ferouz Y. Ayadi, Parisa Fallahi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan
Kurt A. Rosentrater
A single-screw laboratory extruder was used to conduct an L 18 (2 2 X 3 6 ) Taguchi fractional factorial study of aquafeed processing. The ingredients were based on a formulation for nutritionally-balanced Nile tilapia diets containing distillers dried grains with solubles (DDGS) and soybean meal as the main protein sources, in addition to constant amounts of corn flour, whey, and fish meal. The effects of three levels of DDGS (20, 30 and 40%), soybean meal (30, 40 and 50%), ingredient moisture content (20, 30 and 40% db), screw speed (100, 150 and 200 rpm), barrel temperatures (80-100-100°C, 80-120-120°C and …
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown
Kurt A. Rosentrater
Due to tremendous increases in global aquaculture production, compounded with limited availabilities of fish meal for fish feed, the need for alternative protein sources cannot be disregarded. Toward that end, twin-screw extrusion studies were performed to investigate the production of nutritionally-balanced feeds for juvenile yellow perch (Perca flavescens). Five isocaloric (~ 3.06 kcal/g) ingredient blends, adjusted to a similar protein content of 36.7% db, were formulated with 0, 10, 20, 30, and 40% distillers dried grains with solubles (DDGS) at an initial moisture content of 5-7% db, with appropriate amounts of fish meal, fish oil, whole wheat flour, corn gluten …
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Rainbow Trout (Oncorhynchus Mykiss) Feeds, Ferouz Y. Ayadi, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater, Michael L. Brown
Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Rainbow Trout (Oncorhynchus Mykiss) Feeds, Ferouz Y. Ayadi, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater, Michael L. Brown
Kurt A. Rosentrater
The world’s increasing demand for seafood products has resulted in rising demands for fish meal for fish feed, which must be compensated for by searching for effective alternative protein sources. In this study, twin-screw extrusion trials were conducted to study the production of nutritionally-balanced feeds for rainbow trout fingerlings (Oncorhynchus mykiss). Six isocaloric (~ 4.61 kcal/g) ingredient blends with a similar protein content of 52.8% db were formulated with 0, 10, 20, 30, 40 and 50% distillers dried grains with solubles (DDGS) and other ingredients (i.e. fish meal, fish oil, whole wheat flour, corn gluten meal, and vitamin and mineral …
Extrusion Studies Of Aquaculture Feed Using Distillers Dried Grains With Solubles And Whey, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Extrusion Studies Of Aquaculture Feed Using Distillers Dried Grains With Solubles And Whey, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Kurt A. Rosentrater
Three isocaloric (3.5 kcal/g) ingredient blends containing 20, 30, and 40% distiller-dried grains with solubles (DDGS) along with 5% whey were prepared with a net protein content adjusted to 28% (wet basis [wb]). Other ingredients in the blends included soy flour, corn flour, fish meal, vitamin, and mineral mix. These blends were extruded in a single-screw extruder at 15, 20, and 25% (wb) moisture content and at 130 and 160 rpm screw speeds. Compared to previous research, the durability and unit density of the extrudates in this study were found to increase substantially by the addition of whey to the …
Effects Of Ingredients And Extrusion Parameters On Properties Of Aquafeeds Containing Ddgs And Corn Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Effects Of Ingredients And Extrusion Parameters On Properties Of Aquafeeds Containing Ddgs And Corn Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using 3 levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of corn starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Tapioca Starch, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Tapioca Starch, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of tapioca starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Potato Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Potato Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of potato starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …
Utilization Of Distillers Dried Grains For Fish Feed By Extrusion Technology—A Review, Nehru Chevanan, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan
Utilization Of Distillers Dried Grains For Fish Feed By Extrusion Technology—A Review, Nehru Chevanan, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan
Kurt A. Rosentrater
Protein-rich distillers dried grains (DDG) from ethanol plants has been used as livestock feed for many years. Feed conversion efficiency in fish, however, is typically much higher compared to traditional livestock. But, the cost of fish feed is one of the challenges for profitable fish cultivation. Due to the exponential growth of ethanol plants in recent years, DDG is becoming readily available as a reasonably-priced base material for animal feeds, and because it has a relatively high protein content, it also has much potential for use as a fish feed ingredient. Even though much literature is available on conversion of …