Other Engineering Commons^™

Collecting, Preparing, And Synthesizing Well Log Data For Subsurface Mapping: Example From The Bakken Formation, Asel Sherimkulova

Graduate Theses & Non-Theses

Late Devonian and Early Mississippian Bakken Formation consists of three distinct members: the upper shale, middle, and lower shale. The upper and lower shales are excellent source rocks, rich in organic content. The organic material in the shales was derived from planktonic algae. Both the upper and lower shales were deposited during a transgressive event in hypoxic to anoxic conditions. The original total organic carbon content in the Bakken shales ranges from 20 to 22 weight percent, however; the content decreases to 10 to 17 weight percent as a result of maturation of hydrocarbons and primary expelling of oil. High …

Distributed Fiber-Optic Temperature Sensor Validations Using Field Deployments In The Flooded Orphan Boy Mine Shaft In Butte, Mt, Elliott Mazur

Graduate Theses & Non-Theses

The process of sensor validation through experimentation with the Omnisens Distributed Temperature and Strain (DITEST) Brillouin Optical Time Domain Analyzer (BOTDA) proved to be a challenging project. The project encompassed sensor calibrations, system error minimization, sensor network design and deployment, and the characterization of temperatures in the Orphan Boy Mine shaft. Fiber-optic cable sensor calibrations yielded linear relationship coefficients 0.6-1.0MHZ/°F, indicating a strong positive correlation between Brillouin Frequency Shifts and temperature. Calibrated sensors demonstrated accuracies near ±0.8°F using the corrected error bounds from residual analyses as the benchmark. Fiber-optic measurement accuracy and repeatability were controlled by user-selected signal interrogator settings …

Measuring Accuracy Of Two 3d Printing Materials, Mudassir Ali

Master of Technology Management Plan II Graduate Projects

Part accuracy is one of the important aspect in the manufacturing industry. The overall inaccuracy of the parts being built by RP technology has been one of the major challenges that need to be overcome. Though all the printing materials come with specifications, but the suppliers and manufactures does not specify the accuracy of the materials. In this study we established a study which compares the accuracy of the materials in consideration and performed an experiment to establish the superiority of a material in terms of accuracy over each other. The purpose of this project was to compare the dimensional …

A Physicochemical Prediction Of Prolonged Natural Co2 Leakage In The Little Grand Wash Fault Zone, Green River, Utah, Kyungdoe Han

Theses and Dissertations

Physicochemical investigation on a natural CO2 system and the accommodated fault-controlled fluids using a geochemical modeling method provides important information regarding the security assessment for geological carbon sequestration (GCS), which is the most promising method for enhancing our knowledge of the side effects of GCS. By employing an utilized series of regional fluid chemistry and hydrogeologic parameters, this study investigated the consequences caused by migration of CO2 in a naturally leaking CO2 system that developed in normal faults in the southwestern U.S. 1-D and 2-D models were conducted using the multi-phase, multi-component reactive transport simulator, TOUGHREACT, to establish sets of …

Direct Band Gap Gallium Antimonide Phosphide (Gasbxp1-X) For Solar Fuels., Harry Benjamin Russell

Electronic Theses and Dissertations

Photoelectrochemical water splitting has been identified as a promising route for achieving sustainable energy future. However, semiconductor materials with the appropriate optical, electrical and electrochemical properties have yet to be discovered. In search of an appropriate semiconductor to fill this gap, GaSbP, a semiconductor never tested for PEC performance is proposed here and investigated. Density functional theory (DFT+U) techniques were utilized to predict band gap and band edge energetics for GaSbP alloys with low amount of antimony. The overall objective of this dissertation is to understand the suitability of GaSb_xP_1-x alloys for photoelectrochemical water splitting application. Specifically, …

Processing And Interpretation Of Three-Component Vertical Seismic Profile Data, Ross Sea, Antarctica, Meltem Akan

Graduate Theses & Non-Theses

The Antarctic Geological Drilling Program (ANDRILL) AND-2A drill hole was drilled, cored and logged in southern McMurdo Sound (SMS) in the western Ross Sea, Antarctica during the austral summer of 2007. A single near-offset, over-sea ice vertical seismic profile (VSP) was collected in the AND-2A drill hole as a part of the logging program. The source for VSP data collection was a Generator Injector (GI) air-gun which was suspended by a cable through a hole made in the sea ice. The reason for selecting a GI air gun was the minimization of the bubble pulse effects which are prevalent in …

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …

Diffusive Behavior Of Physically Cross-Linked Hydrogels, Morgan A. Stilke

Williams Honors College, Honors Research Projects

A hydrogel is a water swollen polymeric network that has the potential to transform a variety of biomedical applications because of its biocompatibility and water content. Unfortunately, hydrogels typically have poor mechanical robustness. The majority of the content is water, while the remaining structure consists of a physical network, a covalent network, or a combination of both, yielding strength and toughness. There are several strategies attempted to improve mechanical properties including double network hydrogels comprised of two interpenetrating networks: one being a highly crosslinked sacrificial network and the other being a weakly crosslinked network that maintains reversibility after deformation. However, …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

University of New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Developing An Optimal Model For Infant Home Visitation, Isaac Atuahene

Doctoral Dissertations

The United States, Great Britain, Denmark, Canada and many other countries have accepted home visitation (HV) as a promising strategy for interventions for infants after births and for their mothers. Prior HV studies have focused on theoretical foundations, evaluations of programs, cost/benefit analysis and cost estimation by using hospital/payer/insurance data to prove its effectiveness and high cost. As governments and private organizations continue to fund HVs, it is an opportune time to develop and formulate operations research (OR) models of HV coverage, quality and cost so they might be used in program implementation as done for adult home healthcare (HHC) …

Modelling Supercomputer Maintenance Interrupts: Maintenance Policy Recommendations, Jagadish Cherukuri

Masters Theses

A supercomputer is a repairable system with large number of compute nodes interconnected to work in harmony to achieve superior computational performance. Reliability of such a complex system depends on an effective maintenance strategy that involves both emergency and preventive maintenance. This thesis analyzes the maintenance records of four supercomputers operational at The National Institute of Computational Science located at Oak Ridge National Laboratory. We propose to use the generalized proportional intensities model (GPIM) to model the maintenance interrupts as it can capture both the reliability parameters and maintenance parameters and allows the inclusion of both emergency and preventive maintenance. …

The Simulation & Evaluation Of Surge Hazard Using A Response Surface Method In The New York Bight, Michael H. Bredesen

UNF Graduate Theses and Dissertations

Atmospheric features, such as tropical cyclones, act as a driving mechanism for many of the major hazards affecting coastal areas around the world. Accurate and efficient quantification of tropical cyclone surge hazard is essential to the development of resilient coastal communities, particularly given continued sea level trend concerns. Recent major tropical cyclones that have impacted the northeastern portion of the United States have resulted in devastating flooding in New York City, the most densely populated city in the US. As a part of national effort to re-evaluate coastal inundation hazards, the Federal Emergency Management Agency used the Joint Probability Method …

Automated Image Interpretation For Science Autonomy In Robotic Planetary Exploration, Raymond Francis

Electronic Thesis and Dissertation Repository

Advances in the capabilities of robotic planetary exploration missions have increased the wealth of scientific data they produce, presenting challenges for mission science and operations imposed by the limits of interplanetary radio communications. These data budget pressures can be relieved by increased robotic autonomy, both for onboard operations tasks and for decision- making in response to science data.

This thesis presents new techniques in automated image interpretation for natural scenes of relevance to planetary science and exploration, and elaborates autonomy scenarios under which they could be used to extend the reach and performance of exploration missions on planetary surfaces.

Two …

Quantitative Data Extraction Using Spatial Fourier Transform In Inversion Shear Interferometer, Yanzeng Li

Graduate Theses - Physics and Optical Engineering

Currently there are many interferometers used for testing wavefront, measuring the quality of optical elements, and detecting refractive index changes in a certain medium. Each interferometer has been constructed for a specific objective. Inversion shear interferometer is one of them. Compared to other interferometers, it has its own advantages, such as only being sensitive to coma aberration, but it has some limitations as well. It does not allow use of phase shifting technique. A novel inversion shear interferometer was invented using holographic lenses. By using the spatial carrier method, phase information of the wavefront was extracted. The breakthrough of the …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Using Gis To Delineate Headwater Stream Origins In The Appalachian Coal-Belt Region Of Kentucky, Jonathan A. Villines

Theses and Dissertations--Biosystems and Agricultural Engineering

Human activity such as surface mining can have substantial impacts on the natural environment. Performing a Cumulative Hydrologic Impact Assessment (CHIA) of such impacts on surface water systems requires knowing the location and extent of these impacted streams. The Jurisdictional Determination (JD) of a stream’s protected status under the Clean Water Act (CWA) involves locating and classifying streams according to their flow regime: ephemeral, intermittent, or perennial. Due to their often remote locations and small size, taking a field inventory of headwater streams for surface mining permit applications or permit reviews is challenging. A means of estimating headwater stream location …

Electrohydrodynamic Enhancement Of Heat Transfer And Mass Transport In Gaseous Media, Bulk Dielectric Liquids And Dielectric Thin Liquid Films, Seyed Reza Mahmoudi

Electronic Thesis and Dissertation Repository

Controlling transport phenomena in liquid and gaseous media through electrostatic forces has brought new important scientific and industrial applications. Although numerous EHD applications have been explored and extensively studied so far, the fast-growing technologies, mainly in the semiconductor industry, introduce new challenges and demands. These challenges require enhancement of heat transfer and mass transport in small scales (sometimes in molecular scales) to remove highly concentrated heat fluxes from reduced size devices. Electric field induced flows, or electrohydrodynamics (EHD), have shown promise in both macro and micro-scale devices.

Several existing problems in EHD heat transfer enhancements were investigated in this thesis. …

Electroluminescence Studies On Longwavelength Indium Arsenide Quantum Dot Microcavities Grown On Gallium Arsenide, John C. Ramsey

Theses and Dissertations

A comprehensive study of the electroluminescence of four GaAs/AlGaAs microcavity devices with InAs/GaInAs quantum dot active regions emitting near 1.3 µm was conducted. The four molecular beam epitaxial grown samples with AlAs oxide aperture confinement layers were fabricated, characterized, and optically modeled. Optical power transmission of the samples was modeled using Matlab and compared with measured transmission data. Resonant cavity light emitting diodes (RCLEDs) and three vertical cavity surface emitting laser (VCSEL) samples were fabricated and electro-optically characterized over a range of injection currents and temperatures. Devices achieved continuous wave room temperature lasing at 1.28 µm with an output power …

Studies In Modulation Of Interfacial Reactions For Certain Sulphide Minerals, Robert Owen Beyaert

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Preliminary Examination Of The Aluminum Corner Of The Ternary System Aluminum-Silver-Indium (A1-Ag-In), Jerome J. Blake

Bachelors Theses and Reports, 1928 - 1970

In this paper the author attempts to lay the groundwork for future work on the Al-Ag-In system.

Production Of Standard-Grade Ferromanganese In An Electric Arc Furnace, Force F. Baney Jr.

Bachelors Theses and Reports, 1928 - 1970

The investigations conducted in this project were essentially concerned with the effects of various compositions of two different slag systems upon the increased recovery of manganese in a standard-grade ferromanganese.

Investigation Of The Ternary System Silver-Aluminum-Indium (Ag-Al-In), Elvin H. Beardslee

Bachelors Theses and Reports, 1928 - 1970

This thesis paper contains material pertaining to & preliminary investigation of the ternary system Ag-Al-In. Procedures in this preliminary investigation are discussed in detail.

Crystal Habit Modification Of Sodium Chlorate, Michael R. Keegan

Bachelors Theses and Reports, 1928 - 1970

All single crystals have a particular habit or morphology. The crystal habit refers to the relative degree of development of crystallographic planes into surfaces which make up the external appearance of the single crystal.

In this paper, NaClO3 is used as a parent crystal. Its simple cubic habit is modified to tetrahedral by the use of impurities of SO4=, S2O3=, Cr2O7=, and NO3-. The degree of habit change is studied as a function of impurity concentration and temperature. The problem and phenomena are explained in terms of surface chemistry and thermodynamics.

Physico-Chemical Principles Of Sixteenth Century Metallurgy, Robert E. Johnson

Bachelors Theses and Reports, 1928 - 1970

Following a review of sixteenth century metallurgical literature and a discussion of Gibbs free energy, this thesis discusses thermodynamic considerations of galena (PbS) reduction by iron from a lead assay of this period. The importance of fluxes in this assay is emphasized. The discussion covers both equilibrium and non-equilibrium conditions at 1100 degrees Celsius. Possible substitutes for iron are also covered.

Information from twenty-one small controlled lead assays is correlated with the thermodynamic discussion to determine the purpose of each constituent in the assay.

The Beneficiation Of Titaniferous-Magnetite Sands, Ronald Lloyd Nordwick

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation of beneficiation methods is to develop and study possible economic methods for recovering an iron-titanium concentrate of sufficient purity to meet metallurgical requirements for subsequent direct reduction to pig iron and a high titanium slag.

Stress-Corrosion Cracking Of Brass, Paul A. Fossey

Bachelors Theses and Reports, 1928 - 1970

the mechanism of stress-corrosion cracking of brass has been sought for many years. Investigators have proposed many mechanisms, but each of these mechanisms has always had several drawbacks. This paper presents an account of experimental work done in the laboratory on this subject and compares it to the work of previous investigations. It evaluates the mechanisms presented by investigators and shows the failures of these mechanisms. A theory of Nitrogen Embrittlement is presented and an evaluation of this theory with experimental work follows.

Experimental Arc Furnace Smelting Of Titaniferous Iron Sands From The Northern Oregon Coast, Allan P. Herring

Bachelors Theses and Reports, 1928 - 1970

This investigation is an attempt to experimentally smelt titaniferous iron sands from the Northern Oregon Coast in a laboratory arc furnace.

The Effect Of Ph Upon Chelation Reactions In Montmorillonite Clays, Joseph Michael Keane

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to investigate several chelation reactions and determine the effect of variable pH upon these reactions.

An Investigation Of The Sintering Of Iron-Wire Compacts, George L. Vivian

Bachelors Theses and Reports, 1928 - 1970

A study of the sintering of iron has been made by observing the rate of bonding of iron wires wound on iron spools. The specimens were sintered at a constant temperature of 850c in vacuum furnaces capable of producing pressures of 10-5 to 10-4 mm of mercury, and the growth of the bond between wires was observed as a function of time.

It has been concluded that the volume-diffusion mechanism is strongly operating in the sintering of iron at 850c, but in an evacuated system, the evaporation-condensation mechanism also contributes to the sintering process.

The Identification Of Montana Clays By X-Ray Analysis, David Stephen Malyevac

Bachelors Theses and Reports, 1928 - 1970

The purpose of this study is to identify the various Montana clay minerals by means of X-ray diffraction. The ultimate aim of this investigation is to identify the different clay mixtures through an analysis of their respective diffraction patterns, and diffraction patterns obtained after various chemical and thermal treatments.