Systems Engineering Commons^™

A Decision Analysis Framework For Evaluation Of Helmet Mounted Display Alternatives For Fighter Aircraft, Matthew R. Dansereau

Theses and Dissertations

The promise of providing an intuitive and efficient information interface, while allowing the warfighter to perform other critical tasks such as targeting or aircraft control, has led to the growing popularity of Helmet Mounted Displays (HMDs) across the military landscape, especially combat aircraft. Though design and selection of competing systems is critical to optimized performance and safety, structured methods for the evaluation of HMDs are not often used in the acquisition community, leaving selection among alternative designs to the judgment of subject matter experts. However, technical decision-making has been shown to be flawed without the use of a structured decision …

Exploring Individual Differences In Workload Assessment, Danielle K. Boeke

Theses and Dissertations

Air Force missions continue to increase in complexity often imposing higher levels of task load from cognitive tasks on the operators. This increased task load manifests itself in increased cognitive workload and potentially derogated performance. While cognitive workload has been studied for decades, recent advances in objective workload models and physiology monitoring have the potential to provide a more robust understanding of workload, potentially allowing systems to adaptively employ automation to maintain operator peak performance. The current research sought to provide insight into the relationship between subjective workload, task performance, objective workload, and select physiology measures. Analysis of an existing …

Approximate Dynamic Programming For Military Resource Allocation, Carl R. Parson

Theses and Dissertations

This research considers the optimal allocation of weapons to a collection of targets with the objective of maximizing the value of destroyed targets. The weapon-target assignment (WTA) problem is a classic non-linear combinatorial optimization problem with an extensive history in operations research literature. The dynamic weapon target assignment (DWTA) problem aims to assign weapons optimally over time using the information gained to improve the outcome of their engagements. This research investigates various formulations of the DWTA problem and develops algorithms for their solution. Finally, an embedded optimization problem is introduced in which optimization of the multi-stage DWTA is used to …

Characterizing And Managing Intrusion Detection System (Ids) Alerts With Multi-Server/Multi-Priority Queuing Theory, Christopher C. Olsen

Theses and Dissertations

The DoD sets forth an objective to employ an active cyber defense capability to prevent intrusions onto DoD networks and systems. Intrusion Detection Systems (IDS) are a critical part of network defense architectures, but their alerts can be difficult to manage. This research applies Queuing Theory to the management of IDS alerts, seeking to answer how analysts and priority schemes effect alert processing performance. To characterize the effect of these two variables on queue wait times, a MATLAB simulation was developed to allow parametric analysis under two scenarios. The first varies the number of analysts and the second varies the …

Security Analysis On Network Systems Based On Some Stochastic Models, Xiaohu Li

University of New Orleans Theses and Dissertations

Due to great effort from mathematicians, physicists and computer scientists, network science has attained rapid development during the past decades. However, because of the complexity, most researches in this area are conducted only based upon experiments and simulations, it is critical to do research based on theoretical results so as to gain more insight on how the structure of a network affects the security. This dissertation introduces some stochastic and statistical models on certain networks and uses a k-out-of-n tolerant structure to characterize both logically and physically the behavior of nodes. Based upon these models, we draw several illuminating results …

Wildlife Deterrence Method Test Device, Garrett Tietz, Adam Webb, Dane Knutson

Mechanical Engineering

The objective of the Deer Busters team is to design and build a device or system of devices that will be used to determine which method, or methods, are most effective at deer deterrence. JumpSport suspects that a method which gives the appearance of approach to the deer in an aggressive or startling manner but also changes the way it attacks so that the deer do not get used to the device will be most effective. Deer Busters is committed to the completion of the deer deterrent testing device by the end of the fall quarter of 2014.

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

Stochastic Models For Capacity Planning In Healthcare Delivery: Case Studies In An Outpatient, Inpatient And Surgical Setting, Asli Ozen

Doctoral Dissertations

U.S. healthcare system has become far too complex and costly to sustain and operations research has much to contribute in improving health systems by addressing a large spectrum of problems. We study capacity planning in healthcare while considering the case-mix of patients, using stochastic modeling in different application areas: primary care, inpatient bed allocation and (spine) surgery scheduling. This body of work was developed over four years of collaborative research with hospitals and healthcare providers. The main objective of our research in primary care is to optimize the patient mix of primary care physicians in a group practice to maximize …

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …

Automated Image Interpretation For Science Autonomy In Robotic Planetary Exploration, Raymond Francis

Electronic Thesis and Dissertation Repository

Advances in the capabilities of robotic planetary exploration missions have increased the wealth of scientific data they produce, presenting challenges for mission science and operations imposed by the limits of interplanetary radio communications. These data budget pressures can be relieved by increased robotic autonomy, both for onboard operations tasks and for decision- making in response to science data.

This thesis presents new techniques in automated image interpretation for natural scenes of relevance to planetary science and exploration, and elaborates autonomy scenarios under which they could be used to extend the reach and performance of exploration missions on planetary surfaces.

Two …

A Method To Define Requirements For System Of Systems, Randy Gene Walker

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based method for defining System of Systems (SoS) requirements using an inductive research design. Just as traditional Systems Engineering (TSE) includes a requirements definition phase, so too does System of Systems Engineering (SoSE); only with a wider, more over- arching, systemic perspective. TSE addresses the design and development of a single system with generally a very specific functional purpose enabled by any number of subcomponents. SoSE however, addresses the design and development of a large, complex system to meet a wide range of functional purposes enabled by any number …

Air Force Inspection System: An Application For System-Of-Systems (Sos) Engineering, Joseph R. Lay

Theses and Dissertations

The Air Combat Command (ACC) Inspector General (IG) assesses the operational readiness and combat effectiveness of units by evaluating individual wings. Today's conflicts; however, are waged as a joint force. The Joint Forces Commander (JFC) leverages the resources of the entire military complex to achieve strategic objectives. The synergistic effects, created by the integration of individual weapon systems, produce greater results than the individual components. Evaluating wings outside the joint System of Systems (SoS) architecture does not provide a true assessment of combat readiness. Using a case study method, this research examines the idea of integrating a joint SoS architecture …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

System Theoretic Analysis Of Battery Equalization Systems, Haoqi Chen

Theses and Dissertations

Battery equalizers are widely used in multi-battery systems to maintain balanced charge among individual battery cells. While the research on the hardware realization of battery equalizers has received significant attention, rigorous analysis of battery equalization from the system's point of view remains largely unexplored. In this research, we study three types of battery equalization system structures: series-based, layer-based, and module-based. Specifically, we develop mathematical models that describe the system-level behavior of the battery equalization processes under these equalization structures. Then, based on the mathematical models, analytical methods are derived to evaluate the performance of the equalization processes. We also carry …

Overcoming Hard Problems In Software Testing With Testing As A Service, Brianna Floss

Theses and Dissertations

Software testing is a crucial phase of the software development lifecycle, responsible for assuring that the system under test meets quality standards, requirements, and consumer needs. Unfortunately, software testing is not without flaws. Some problems are timeless while others are brought on by new technologies and methodologies. As software systems grow in size and complexity, quality becomes significantly more difficult to ensure. With recent advancements in cloud computing, the internet’s vast and elastic resources are available for testing. Testing as a Service (TaaS) offers accessible services that handle testing activities to consumers on a pay-as-you-test basis in hopes of providing …

Exploratory Study In Container Loading Embraer 190 Aircraft, Ryan H. Auyeung

Open Access Theses

Since the dawn of aviation, cargo loading on aircraft has remained virtually constant. A person and a baggage cart together have been the primary method of loading baggage on to aircraft, and this practice has virtually remained unchanged, especially for narrow body aircraft. This study explores the question of whether a loading device, designed for Embraer 190 aircraft, can increase economic efficiency by reducing aircraft turnaround times, increasing aircraft utilization and reducing work hours. In the course of designing a theoretical loading device for an Embraer 190, various literature ranging from elaborate articulating conveyor belts, to the use of LD3-45W …

Characterizing Habituation Using The Time-On-Task Metric In An Iris Recognition System, Jacob A. Hasselgren

Open Access Theses

This thesis presents a characterization of biometric habituation in an iris recognition study using qualitative analysis of a distributed habituation survey and quantitative analysis of iris images collected in 2010 and 2012. The performed analyses answered the following two questions: a) How consistently does the biometric community define habituation?; and b) Does the time-on-task variable provide enough evidence to indicate the existence of habituation in an iris recognition system? The qualitative analysis examined responses to 12 habituation-related questions from 13 biometric experts to identify common themes that not only determined definition consistency but also characterized critical components often omitted from …

Robustness Of Complex Networks To Global Perturbations, Samuel Heiserman

Graduate Dissertations and Theses

This thesis studies the robustness of complex dynamical networks with non-trivial topologies against global perturbations, following Robert May’s seminal work on network stability, in order to find critical stability thresholds of global perturbations and to determine if their impact varies across different network topologies. Numerical analysis is used as the primary research method. Dynamical networks are randomly generated in the form of a coefficient matrix of stable linear differential equations. The networks are then inflicted with global perturbation (i.e., addition of another random matrix with varying magnitudes) and their stabilities are tested for each perturbation magnitude, to determine at what …

Systems Theory Based Framework For Competency Models, Joseph M. Bradley

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems theoretic framework for design, analysis and transformation of competency models using an inductive research design. This research examines the origins and development of competency models from a systems theoretic perspective. Competency models have been largely developed by a comparative method first proposed by McClelland, or the use of Delphi method survey techniques. The assumption that a population containing an exemplar and fully successful members would enable population of a holistic competency model has reported numerous failures. Similarly, reporting on the use of Delphi methods has focused on attempting …

A Systems-Based Framework For The Assessment Of Performance Measurement System Implementations In R&D Organizations, Kenneth S. Baggett Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Performance measurement is utilized by organizations in all industries, including research and development (R&D). Measures are developed, data are collected, and the measurement results are used to drive the organization. The implicit hope is, of course, that the measures drive the organization to improve. However, literature identifies high failure rates directly related to performance measurement system (PMS) implementations. Establishing the fundamental operational characteristics associated with successful PMSs would provide a significant contribution towards the establishment of PMS assessment criteria. This research addresses this gap through the use of a grounded theory method employed to identify these operational characteristics, assesses the …

Assessing The Impact Of Electronic Health Record Systems Implementation On Hospital Patient Perceptions Of Care, Katherine Sofia Palacio Salgar

Engineering Management & Systems Engineering Theses & Dissertations

The delivery of health care services has been impacted by advances in Knowledge Management Information Systems (KMIS) and Information Technology (IT). The literature reveals that Electronic Health Records Systems (EHRs) are a comprehensive KMIS. There is a wide recognition in the body of knowledge that demonstrates the potential of EHRs to transform all aspects of health care services and, in consequence, the performance of Health Care Delivery Organizations (HCDO). Authors of published research also agree that there is a need for more empirical contributions that demonstrate the impact of EHRs upon HCDO. It is argued that in most cases, studies …

The Relationship Among Hfacs Levels And Analysis Of Human Factors In Unmanned And Manned Air Vehicles, Veysel Yesilbas

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation analyzes the structural relationships among the Human Factors Accident Classification System levels for unmanned air vehicle and manned air vehicle accidents and the common relationships between unmanned air vehicle and manned air vehicle accident causes. The study acquired DOD HFACS accident classification data from 347 United States Air Force Class A accident reports for the years between 2000 and 2013.

The dissertation utilized a set of analysis that is considered to contribute substantially to the respective domain of the study. The correlations found among categorical levels were applied to HFACS taxonomy based on the Reason Model via path …

Exploring A Method To Quantitatively Measure Design Flexibility Early In The Defense Acquisition Life Cycle, Joseph S. Kim

Theses and Dissertations

The purpose of this research was to demonstrate a methodology using an Epoch-Era Analysis to quantify and estimate the value of design flexibility early in the Department of Defense's (DOD) acquisition life cycle. This method was implemented using a possible replacement to the Air Force's fighter-trainer aircraft as a baseline and a set of future requirements that would change the baseline. An existing Cost Estimating Relationship tool was utilized in conjunction with a decision tree modeling approach to accommodate uncertain future needs. Sensitivity analysis was performed to identify model parameters with dominant effects on the recommended design strategies. The results …

Improving The Enterprise Requirements And Acquisition Model's Development Test And Evaluation Process Fidelity, Jason W. Sutherlin

Theses and Dissertations

Shrinking budgets and dynamic military conflicts have driven Department of Defense (DoD) leadership to reform how the military acquires weapon systems with the goal of decreasing program schedules and costs, while maximizing performance. With fifty years of reform, the DoD has been unable to adequately control program schedule objectives. Previous research attempted to support acquisition reforms through modeling and simulation. The Enterprise Requirements and Acquisition Model (ERAM) captures a program's progression through the Defense Acquisition Management System to gain insight into significant delays that impact program schedule and probability of completion. A past unexpected result included the insignificant impact that …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

An Unsupervised Consensus Control Chart Pattern Recognition Framework, Siavash Haghtalab

Electronic Theses and Dissertations

Early identification and detection of abnormal time series patterns is vital for a number of manufacturing. Slide shifts and alterations of time series patterns might be indicative of some anomaly in the production process, such as machinery malfunction. Usually due to the continuous flow of data monitoring of manufacturing processes requires automated Control Chart Pattern Recognition(CCPR) algorithms. The majority of CCPR literature consists of supervised classification algorithms. Less studies consider unsupervised versions of the problem. Despite the profound advantage of unsupervised methodology for less manual data labeling their use is limited due to the fact that their performance is not …

Sustainability Analysis In Integrated Inventory Control And Transportation Systems, Brian Joseph Schaefer

Doctoral Dissertations

"Due to the importance of costs as well as environmental effects of logistical activities throughout supply chains, such as inventory holding, freight transportation, and warehousing activities, this dissertation models and analyzes four integrated inventory control and transportation problems that account for economic and environmental aspects of a supply chain agents related decisions.

The first model presents an integrated inventory control and transportation problem in a single item deterministic demand setting. A supply chain agents inventory control and transportation mode selection problem is solved under carbon cap, carbon cap and trade, carbon cap and offset, and carbon tax regulations. The second …

A Contingency Base Camp Framework Using Model Based Systems Engineering And Adaptive Agents, Dustin Scott Nottage

Doctoral Dissertations

"This research investigates the use of adaptive agents and hybridization of those agents to improve resource allocation in dynamic systems and environments. These agents are applied to contingency bases in an object oriented approach utilizing Model-based Systems Engineering (MBSE) processes and tools to accomplish these goals. Contingency bases provide the tools and resources for the military to perform missions effectively. There has been increasing interest in improving the sustainability and resilience of the camps, as inefficiencies in resource usage increases. The increase in resource usage leads to additional operational costs and added danger to military personnel guarding supply caravans.

The …

Lean Fire Management: A Focused Analysis Of The Incident Command System Based On Toyota Production System Principles, Jeremiah S. Fugate

Theses and Dissertations--Mechanical Engineering

A primary role of the Incident Command System is to learn from past incidents, as illustrated by its origins in the wildland firefighting community. Successful emergency response operations under the Incident Command System has prompted its nationwide spread, this promulgation critically relies on the system’s capability to stabilize and continuously improve various aspects of emergency response through effective organizational learning. The objective of this study is to evaluate the potential to apply fundamental principles of the Toyota Production System (Lean manufacturing) to improve learning effectiveness within the Incident Command System. An in-depth review of literature and training documents regarding both …

Data Classification And Forecasting Using The Mahalanobis-Taguchi Method, Adebolaji A. Jobi-Taiwo

Masters Theses

"Classification and forecasting are useful concepts in the field of condition monitoring. Condition monitoring refers to the analysis and monitoring of system characteristics to understand and identify deviations from normal operating conditions. This can be performed for prediction, diagnosis, or prognosis or a combination of any these purposes. Fault identification and diagnosis are usually achieved through data classification, while forecasting methods are usually used to accomplish the prediction objective. Data gathered from monitoring systems often consists of multiple multivariate time series and is fed into a model for data analysis using various techniques. One of the data analysis techniques used …