Systems Engineering Commons^™

Efficient Connectivity Management And Path Planning For Iot And Uav Networks, Amirahmad Chapnevis

Theses and Dissertations

This dissertation explores how to better manage resources in mobile networks, especially for enhancing the performance of Unmanned Aerial Vehicles (UAV)-supported IoT networks. We explored ways to set up a flexible communication architecture that can handle large IoT deployments by making good use of mobile core network resources like bearers and data paths. We developed strategies that meet the needs of IoT networks and enhance network performance. We also developed and tested a system that combines traffic from several mobile devices that use the same user identity and network resources within the core mobile network. We used everyday smartphones, SIM …

Methods That Support The Validation Of Agent-Based Models: An Overview And Discussion, Andrew Collins, Matthew Koehler, Christopher Lynch

Engineering Management & Systems Engineering Faculty Publications

Validation is the process of determining if a model adequately represents the system under study for the model’s intended purpose. Validation is a critical component in building the credibility of a simulation model with its end-users. Effectively conducting validation can be a daunting task for both novice and experienced simulation developers. Further compounding the difficult task of conducting validation is that there is no universally accepted approach for assessing a simulation. These challenges are particularly relevant to the paradigm of Agent-Based Modeling and Simulation (ABMS) because of the complexity found in these models’ mechanisms and in the real-world situations they …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Towards Agile Academia: An Approach To Scientific Paper Writing Inspired By Software Engineering, Tyler Procko

Doctoral Dissertations and Master's Theses

The construction of scientific papers is performed in service of the greater scientific community. This iterative process is, in effect, an academic economy, where all members benefit from well-written papers. However, many published scientific papers are poorly written; they often lack sufficient detail to allow replication, there is improper usage of citations or a lack of regard to relevant work, reporting is vague or without linked empirical data to allow verification, figures do not correspond to text or are non-sensical, literary elements, e.g., bulleted lists, are used ineffectively, formatting renders certain sections unreadable, and grammatical errors abound. The issues of …

Evaluating Eeg–Emg Fusion-Based Classification As A Method For Improving Control Of Wearable Robotic Devices For Upper-Limb Rehabilitation, Jacob G. Tryon

Electronic Thesis and Dissertation Repository

Musculoskeletal disorders are the biggest cause of disability worldwide, and wearable mechatronic rehabilitation devices have been proposed for treatment. However, before widespread adoption, improvements in user control and system adaptability are required. User intention should be detected intuitively, and user-induced changes in system dynamics should be unobtrusively identified and corrected. Developments often focus on model-dependent nonlinear control theory, which is challenging to implement for wearable devices.

One alternative is to incorporate bioelectrical signal-based machine learning into the system, allowing for simpler controller designs to be augmented by supplemental brain (electroencephalography/EEG) and muscle (electromyography/EMG) information. To extract user intention better, sensor …

Reinforcing Digital Trust For Cloud Manufacturing Through Data Provenance Using Ethereum Smart Contracts, Trupti Narayan Rane

Engineering Management & Systems Engineering Theses & Dissertations

Cloud Manufacturing(CMfg) is an advanced manufacturing model that caters to fast-paced agile requirements (Putnik, 2012). For manufacturing complex products that require extensive resources, manufacturers explore advanced manufacturing techniques like CMfg as it becomes infeasible to achieve high standards through complete ownership of manufacturing artifacts (Kuan et al., 2011). CMfg, with other names such as Manufacturing as a Service (MaaS) and Cyber Manufacturing (NSF, 2020), addresses the shortcoming of traditional manufacturing by building a virtual cyber enterprise of geographically distributed entities that manufacture custom products through collaboration.

With manufacturing venturing into cyberspace, Digital Trust issues concerning product quality, data, and intellectual …

Ads-B Classification Using Multivariate Long Short-Term Memory–Fully Convolutional Networks And Data Reduction Techniques, Sarah Bolton *, Richard Dill, Michael R. Grimaila, Douglas Hodson

Faculty Publications

Researchers typically increase training data to improve neural net predictive capabilities, but this method is infeasible when data or compute resources are limited. This paper extends previous research that used long short-term memory–fully convolutional networks to identify aircraft engine types from publicly available automatic dependent surveillance-broadcast (ADS-B) data. This research designs two experiments that vary the amount of training data samples and input features to determine the impact on the predictive power of the ADS-B classification model. The first experiment varies the number of training data observations from a limited feature set and results in 83.9% accuracy (within 10% of …

Comparative Analysis Of Fullstack Development Technologies: Frontend, Backend And Database, Qozeem Odeniran

Electronic Theses and Dissertations

Accessing websites with various devices has brought changes in the field of application development. The choice of cross-platform, reusable frameworks is very crucial in this era. This thesis embarks in the evaluation of front-end, back-end, and database technologies to address the status quo. Study-a explores front-end development, focusing on angular.js and react.js. Using these frameworks, comparative web applications were created and evaluated locally. Important insights were obtained through benchmark tests, lighthouse metrics, and architectural evaluations. React.js proves to be a performance leader in spite of the possible influence of a virtual machine, opening the door for additional research. Study b …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

Electronic Theses and Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Hard-Real-Time Computing Performance In A Cloud Environment, Alvin Cornelius Murphy

Engineering Management & Systems Engineering Theses & Dissertations

The United States Department of Defense (DoD) is rapidly working with DoD Services to move from multi-year (e.g., 7-10) traditional acquisition programs to a commercial industrybased approach for software development. While commercial technologies and approaches provide an opportunity for rapid fielding of mission capabilities to pace threats, the suitability of commercial technologies to meet hard-real-time requirements within a surface combat system is unclear. This research establishes technical data to validate the effectiveness and suitability of current commercial technologies to meet the hard-real-time demands of a DoD combat management system. (Moreland Jr., 2013) conducted similar research; however, microservices, containers, and container …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Comparing Actively Managed Mutual Fund Categories To Index Funds Using Linear Regression Forecasting And Portfolio Optimization, Luke Weiner

Industrial Engineering Undergraduate Honors Theses

The global investment industry offers a wide variety of investment products especially for individual investors. One such product, index funds, which are younger than actively managed mutual funds, have typically outperformed managed funds. Despite this phenomenon, investors have displayed a tendency to continue investing in actively managed funds. Although only a small percentage of actively managed funds outperform index funds, the costs of actively managed funds are significantly higher. Also, managed fund performances are most often determined by their fund category such as growth or real estate. I wanted to answer the following question for individual investors: can we …

Agile Research - Getting Beyond The Buzzword, Trupti Narayan Rane

Engineering Management & Systems Engineering Faculty Publications

"Oh yeah, we're an Agile shop, we gave up Waterfall years ago." - product owners, managers, or could be anyone else. You will seldom have a conversation with a product or software development team member without the agile buzzword thrown at you at the drop of a hat. It would not be an oversell to say that Agile software development has been adopted at a large scale across several big and small organizations. Clearly, Agile is an ideology that is working, which made me explore more on its applicability in research. As someone who has been in the Information Technology …

Fasten: An Iot Platform For Supply Chain Management In A Covid-19 Pandemic Scenario, Fernando Lemos, Thays Do Nascimento, Gustavo Dalmarco

Markets, Globalization & Development Review

This paper points out the major disruptions caused by the COVID-19 pandemic. It proposes an automated Internet-of-Things (IoT) based manufacturing and supply chain system, termed FASTEN, that can deal with such severe disruptions.

Improving Multi-Threaded Qos In Clouds, Weiwei Jia

Dissertations

Multi-threading and resource sharing are pervasive and critical in clouds and data-centers. In order to ease management, save energy and improve resource utilization, multi-threaded applications from different tenants are often encapsulated in virtual machines (VMs) and consolidated on to the same servers. Unfortunately, despite much effort, it is still extremely challenging to maintain high quality of service (QoS) for multi-threaded applications of different tenants in clouds, and these applications often suffer severe performance degradation, poor scalability, unfair resource allocation, and so on.

The dissertation identifies the causes of the QoS problems and improves the QoS of multi-threaded execution with three …

Human Fatigue Predictions In Complex Aviation Crew Operational Impact Conditions, Suresh Rangan

Doctoral Dissertations

In this last decade, several regulatory frameworks across the world in all modes of transportation had brought fatigue and its risk management in operations to the forefront. Of all transportation modes air travel has been the safest means of transportation. Still as part of continuous improvement efforts, regulators are insisting the operators to adopt strong fatigue science and its foundational principles to reinforce safety risk assessment and management. Fatigue risk management is a data driven system that finds a realistic balance between safety and productivity in an organization. This work discusses the effects of mathematical modeling of fatigue and its …

Integrating The First Person View And The Third Person View Using A Connected Vr-Mr System For Pilot Training, Chang-Geun Oh, Kwanghee Lee, Myunghoon Oh

Journal of Aviation/Aerospace Education & Research

Virtual reality (VR)-based flight simulator provides pilots the enhanced reality from the first-person view. Mixed reality (MR) technology generates effective 3D graphics. The users who wear the MR headset can walk around the 3D graphics to see all its 360 degrees of vertical and horizontal aspects maintaining the consciousness of real space. A VR flight simulator and an MR application were connected to create the capability of both first-person view and third-person view for a comprehensive pilot training system. This system provided users the capability to monitor the aircraft progress along the planned path from the third-person view as well …

Administrative Law In The Automated State, Cary Coglianese

All Faculty Scholarship

In the future, administrative agencies will rely increasingly on digital automation powered by machine learning algorithms. Can U.S. administrative law accommodate such a future? Not only might a highly automated state readily meet longstanding administrative law principles, but the responsible use of machine learning algorithms might perform even better than the status quo in terms of fulfilling administrative law’s core values of expert decision-making and democratic accountability. Algorithmic governance clearly promises more accurate, data-driven decisions. Moreover, due to their mathematical properties, algorithms might well prove to be more faithful agents of democratic institutions. Yet even if an automated state were …

Human Characteristics Impact On Strategic Decisions In A Human-In-The-Loop Simulation, Andrew J. Collins, Shieda Etemadidavan

Engineering Management & Systems Engineering Faculty Publications

In this paper, a hybrid simulation model of the agent-based model and cooperative game theory is used in a human-in-the-loop experiment to study the effect of human demographic characteristics in situations where they make strategic coalition decisions. Agent-based modeling (ABM) is a computational method that can reveal emergent phenomenon from interactions between agents in an environment. It has been suggested in organizational psychology that ABM could model human behavior more holistically than other modeling methods. Cooperative game theory is a method that models strategic coalitions formation. Three characteristics (age, education, and gender) were considered in the experiment to see if …

Internet Of Things In Sustainable Energy Systems, Abdul Salam

Faculty Publications

Our planet has abundant renewable and conventional energy resources but technological capability and capacity gaps coupled with water-energy needs limit the benefits of these resources to citizens. Through IoT technology solutions and state-of-the-art IoT sensing and communications approaches, the sustainable energy-related research and innovation can bring a revolution in this area. Moreover, by the leveraging current infrastructure, including renewable energy technologies, microgrids, and power-to-gas (P2G) hydrogen systems, the Internet of Things in sustainable energy systems can address challenges in energy security to the community, with a minimal trade-off to environment and culture. In this chapter, the IoT in sustainable energy …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Resource Allocation And Task Scheduling Optimization In Cloud-Based Content Delivery Networks With Edge Computing, Yang Peng

Operations Research and Engineering Management Theses and Dissertations

The extensive growth in adoption of mobile devices pushes global Internet protocol (IP) traffic to grow and content delivery network (CDN) will carry 72 percent of total Internet traffic by 2022, up from 56 percent in 2017. In this praxis, Interconnected Cache Edge (ICE) based on different public cloud infrastructures with multiple edge computing sites is considered to help CDN service providers (SPs) to maximize their operational profit. The problem of resource allocation and performance optimization is studied in order to maximize the cache hit ratio with available CDN capacity.

The considered problem is formulated as a multi-stage stochastic linear …

The Self-Sufficient Ticketing Response System For The Rajant Support Network, Maria E. Lemaster

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Maria E. Lemaster on April 26, 2019.

Evaluation Of Suas Education And Training Tools, Brent Terwilliger, Scott Burgess, James Solti, Kristine Kiernan, Christian Janke, Andrew Shepherd

Publications

The wide distribution and demographic composition of students seeking small unmanned aircraft system (sUAS) education presents a need to fully understand the capabilities, limitations, and dependencies of effective training tools. Concepts, practices, and technologies associated with modeling and simulation, immersive gaming, augmented and mixed-reality, and remote operation have demonstrated efficacy to support engaged student learning and objective satisfaction. Identification and comparison of key attributes critical to an aviation educational framework, such as competency-based training, enables educational designers to identify those tools with the highest potential to support successful learning. A series of factors, such as system performance, regulatory compliance, environmental …

Teen Driver System Modeling: A Tool For Policy Analysis, Celestin Missikpode, Corrine Peek-Asa, Daniel V. Mcgehee, James Torner, Wayne Wakeland, Robert Wallace

Systems Science Faculty Publications and Presentations

Background: Motor vehicle crashes remain the leading cause of teen deaths in spite of preventive efforts. Prevention strategies could be advanced through new analytic approaches that allow us to better conceptualize the complex processes underlying teen crash risk. This may help policymakers design appropriate interventions and evaluate their impacts.

Methods: System Dynamics methodology was used as a new way of representing factors involved in the underlying process of teen crash risk. Systems dynamics modeling is relatively new to public health analytics and is a promising tool to examine relative influence of multiple interacting factors in predicting a health …

Understanding Transit System Performance Using Avl-Apc Data: An Analytics Platform With Case Studies For The Pittsburgh Region, Xidong Pi, Mark Egge, Jackson Whitmore, Amy Silbermann, Zhen Sean Qian

Journal of Public Transportation

This paper introduces a novel transit data analytics platform for public transit planning, assessing service quality and revealing service problems in high spatiotemporal resolution for public transit systems based on Automatic Passenger Counting (APC) and Automatic Vehicle Location (AVL) technologies. The platform offers a systematic way for users and decision makers to understand system performance from many aspects of service quality, including passenger waiting time, stop-skipping frequency, bus bunching level, bus travel time, on-time performance, and bus fullness. The AVL-APC data from September 2012 to March 2016 were archived in a database to support the development of a user-friendly web …

An Investigation Of Low Frequency Noise In Server Rooms, Ahmed Al Naami

Dissertations

Noise in a server room can have a major impact on the performance and well-being of the occupants. Sound level and low frequency noise are considered factors that influence the hearing ability of workers. This thesis is an investigation of low-frequency noise in server rooms. We conducted the field study in a server room for a large financial institution. Some employees in this study indicated that they experienced headaches from the noise and requested an analysis of the sound to determine if there were any potential adverse health effects. Attributes of the noise were investigated by evaluating the sound pressure …

Collaborative Appearance-Based Place Recognition And Improving Place Recognition Using Detection Of Dynamic Objects, Juan Pablo Munoz

Dissertations, Theses, and Capstone Projects

This dissertation makes contributions to the problem of Long-Term Appearance-Based Place Recognition. We present a framework for place recognition in a collaborative scheme and a method to reduce the impact of dynamic objects on place representations. We demonstrate our findings using a state-of-the-art place recognition approach.

We begin in Part I by describing the general problem of place recognition and its importance in applications where accurate localization is crucial. We discuss feature detection and description and also explain the functioning of several place recognition frameworks.

In Part II, we present a novel framework for collaboration between agents from a pure …

Force-Canceling Mixer Algorithm For Vehicles With Fully-Articulated Radially Symmetric Thruster Arrays, Joseph Nicholas Casabona

Electronic Theses and Dissertations

A new type of fully-holonomic aerial vehicle is identified and developed that can optionally utilize automatic cancellation of excessive thruster forces to maintain precise control despite little or no throttle authority. After defining the physical attributes of the new vehicle, a flight control mixer algorithm is defined and presented. This mixer is an input/output abstraction that grants a flight control system (or pilot) full authority of the vehicle's position and orientation by means of an input translation vector and input torque vector. The mixer is shown to be general with respect to the number of thrusters in the system provided …