Operations Research, Systems Engineering and Industrial Engineering Commons^™

Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov

Chemical Technology, Control and Management

A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach …

Life Cycle Management Of A Technological Complex For Separating Multicomponent Mixtures Under Conditions Of Uncertainty Of Parameters, Yusuf Shodievich Avazov

Chemical Technology, Control and Management

The issue of control the lifecycle of technological complexes of multicomponent mixtures is considered, taking into account the uncertainty of parameters. Among uncertainties such as parameter uncertainty, model uncertainty, choice uncertainty under variability, spatial variability uncertainty, temporal variability uncertainty, inter-site variability uncertainty, more attention is paid to input parameter uncertainty and action uncertainty. The rectification technology is schematically presented, the influence of parameter uncertainty on the technological functions of the rectification complex. The scheme analyzes the control and assessment of “uncertainty” to repeat the lifecycle of the rectification complex and make changes to the components of the rectification complex technology. …

Study Of Technological Multi-Stage Modes Of Refining Vegetable Oils, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

The work reflects the current state of the technology for obtaining refined vegetable oils and identifies trends in their improvement and further development in the environment of industrial automation using modern methods of distributed monitoring, building control, and management systems for technological processes of refining vegetable oils. The influence of technological modes of refining vegetable oils on the efficiency of diffusion extraction of free fatty acids (FFA) has been studied and the indirect pH-metric measurement of FFA concentration has been substantiated.

Computer Training Systems For Training Engineering Personnel For Control Industrial Enterprises, Yusuf Shodiyevich Avazov, Kamola Rustamovna Abdullaeva

Chemical Technology, Control and Management

A principle has been proposed for constructing computer simulators for improving the qualifications of process control operators at industrial enterprises and for training students of higher educational institutions. The capabilities of a computer simulator that can be used as a digital assistant are revealed. Their architecture for building digital simulators is proposed. From the architecture it is clear that the computer simulator consists of two systems. The training process management system and the server of the computerized simulator are combined into a digital simulator. Simulators in this category provide student operators with the opportunity to develop skills in self-control of …

Uncertainty Of The Ultrasonic Method For Determining The Strength Of Concrete, Ortagoli Sharipovich Hakimov, Zamira Khudoyberdiyevna Ernazarova

Chemical Technology, Control and Management

The issues of measuring the strength of concrete by the method of surface sounding by ultrasound are considered. A measurement model and formulas for estimating the total standard measurement uncertainty, information about the standards used, measurement tools and methods, and environmental parameters are given. Information about the estimation of uncertainty in the form of "eight steps", such as: measurement task; mathematical model of measurement; analysis of input values; observation results; correlations; uncertainty budget; expanded uncertainty; measurement result. It has been established that the uncertainty of type B of the ultrasonic method for determining the strength of concrete is much less …

Problems Of Modeling And Control Of The Technological Process Of Ore Grinding, Djalolitdin Pakhritdinovich Mukhitdinov, Sanjar Boybutayev

Chemical Technology, Control and Management

The article analyzes the methods of mathematical modeling of the closed-loop process of fine grinding of ore in order to predict the composition of the crushed raw material. Analyzed modeling methods that consider the control of classification of crushed raw materials and finished products by the size of the recirculating load, simulation modeling methods, methods that use neuro-phase netthe research apparatus, in which the fuzzy logic apparatus serves as a fundamental component for the formation of conclusions. The materials presented in the article reflect the theoretical substantiation and generalization of the accumulated practical experience in modeling and control of the …

Icts For Surveillance And Suppression: The Case Of The Indian Emergency 1975-1977, Ramesh Subramanian

Journal of International Technology and Information Management

Information and Communications technologies (ICT) pervade society. The Internet, wireless communication, and social media are ubiquitous in and indispensable in society today. As they continue to grow and mushroom, there are new and increased calls from various segments of the society such as technologists, activists, sociologists, and legal experts, who issue warnings on the more nefarious and undesirable uses of ICTs, especially by governments. In fact, government control and surveillance using ICTs is not a new phenomenon. By looking at history, we are able to see several instances when ICTs have been used by governments to control, surveil, and infringe …

3d Flight Simulation System Visualization And Study Of Google Earth, Junyu Wang, Bin Cheng, Chuan Wang, Ren Jian

Journal of System Simulation

Abstract: Through the secondary development of Google Earth, flight training simulation system for visualization of realization, the system used B/S structure, the client browser using Google Earth, all the development on the server side. Mathematical model of aircraft was constructed; 3D modeling software SketchUp was used to establish a realistic fighter jets, missiles, high and low speed flame and other 3D model; the established 3D models was imported into Google Earth; by Microsoft VC ++ 6.0, the secondary development on Digital Earth was achieved, and the control of aircraft and other 3D models was realized; Matlab was used to verify …

Applying Control Abstraction To The Design Of Human–Agent Teams, Clifford D. Johnson, Michael E. Miller, Christina F. Rusnock, David R. Jacques

Faculty Publications

Levels of Automation (LOA) provide a method for describing authority granted to automated system elements to make individual decisions. However, these levels are technology-centric and provide little insight into overall system operation. The current research discusses an alternate classification scheme, referred to as the Level of Human Control Abstraction (LHCA). LHCA is an operator-centric framework that classifies a system’s state based on the required operator inputs. The framework consists of five levels, each requiring less granularity of human control: Direct, Augmented, Parametric, Goal-Oriented, and Mission-Capable. An analysis was conducted of several existing systems. This analysis illustrates the presence of each …

Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua

Journal of System Simulation

Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.

Achievements And Developments Of Hysteresis And Creep Of Pneumatic Artificial Muscles, Shenglong Xie, Haitao Liu, Jiangping Mei

Journal of System Simulation

Abstract: Regarding to the problems of hysteresis and creep, the developments and achievements of the research on pneumatic artificial muscles at home and abroad are systemically reviewed. The state of the art is summarized in terms of characteristics, reasons causing, modeling and control strategies based on the hysteresis and creep modeling. The problems in recent research are analyzed and the direction for further research is put forward. The theoretical study on hysteresis and creep of pneumatic artificial muscle is limited. The hysteresis modeling needs to consider the time-varied parameters caused by creep. Neural network modeling needs to solve …

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …

Dcpp/Polygait Inventory Control System, Logan Pace, Robert Garlinghouse

Industrial and Manufacturing Engineering

This report discusses a proposed system to improve upon inventory management issues experienced in the M&TE Tool room for the PG&E Diablo Canyon Power plant. Effective inventory tracking and management is an important characteristic of any organization handling physical assets, and without the proper system in place, companies may lose expensive items and waste time by not having equipment available when needed. The tool room is experiencing inventory shrinkage of M&TE equipment nearing $100,000 per year largely because of an inefficient checkout system that fails to keep employees accountable for the tools they check out. Even more costly than the …

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …

Maritime Traffic Management: A Need For Central Coordination?, Fulko Van Westrenen, Gesa Praetorius

Gesa Praetorius

Traffic management is not formally organised in the maritime domain. Ships are autonomous and find their own way. Traffic is organised through rules, regulations, and “good seamanship”; it is a distributed system. In areas of high traffic-density support is proved by vessel traffic service (VTS) to promote traffic safety and fluency. VTS does not take control. This organisational structure has proven itself in situations with sufficient resources. When resources become insufficient (e.g. not enough sailing space), the traffic needs an organising mechanism. In this article, the authors argue that the most promising way to do this is by organising centralised …

The Modeling, Analysis And Control Of Resilient Manufacturing Enterprises, Yao Hu

Theses and Dissertations--Electrical and Computer Engineering

The resilience of manufacturing enterprises is an important research topic, since disruptions have severe effects on the normal operation of manufacturing enterprises, especially as manufacturing supply chains become global. Although many case studies have been carried out to address resilience in organizations, a systematic method to model and analyze the resilience dynamics in manufacturing enterprises is not well developed. This study is intended to conduct research on quantitative analysis and control for resilience.

After reviewing the literature addressing resilience, a modeling framework is presented to characterize the resilience of a manufacturing enterprise responding to disruptive events, which includes inventory ow …

Learning Lessons In Resilient Traffic Management: A Cross-Domain Study Of Vessel Traffic Service (Vts) And Air Traffic Control (Atc), Gesa Praetorius, Fulko Van Westrenen, Deborah Mitchell, Erik Hollnagel

Gesa Praetorius

Although younger than the maritime domain, aviation has had a huge impact on the system design and development within shipping. Stakeholders often look towards aviation to make shipping, and the way that traffic is handled and organised, safer, more efficient and more effective. Although legally not the same, Vessel Traffic Service (VTS) is frequently compared to Air Traffic Control (ATC). In this article the area of traffic management within the maritime and aviation domains is addressed from a Resilience Engineering perspective. Focus is placed on the arrival part of a mission. The comparison is based on information collected during two …

Design, Modeling And Control Strategy Of Pv/Fc Hybrid Power System, Dr. Adel A. Elbaset

Dr. Adel A. Elbaset

This paper describes development of a general methodology of an autonomous PV/FC system composed of photovoltaic (PV), electrolyzer, hydrogen storage tank and fuel cell (FC). The aim of this paper is to determine optimum design, control strategy, economic and performance of a PV/FC hybrid power generation system without battery storage taking into account all losses in the system. The paper also presents a computer program based on Matlab software to determine optimum design, control strategy, economic and performance of an autonomous PV/FC hybrid power generation system. The computer program develops to size system components in order to match the load …