Operations Research, Systems Engineering and Industrial Engineering Commons^™

Towards A Unified Definition Of Supply Chain Management, Edward Sweeney

Articles

A wide range of definitions of supply chain management (SCM) have been developed over the last three decades. The philosophy of SCM is based firmly on a recognition that it is only by working in a more integrated manner that competitive advantage can be maximised. However, for this to become a reality the development of common definitions and understandings between supply chain partners is a critical success factor. The corollary of this is that a lack of definitional consistency and a common understanding is an inhibitor to the successful adoption of SCM thinking in practice. This paper reviews a number …

Virtual Ed: Utilisation Of A Discrete Event Simulation-Based Framework In Identifying "Real-Time’ Strategies To Improve Patient Experience Times In An Emergency Department, Waleed Abo Hamad, John Mcinerney, Amr Arisha

Articles

Objectives and Backgrounds Emergency Department (ED) overcrowding and associated excessive Patient Experience Times (PETs) have proven deleterious impacts on patient mortality, morbidity and overall length of hospital stay. Health systems constantly seek cost-effective organisational strategies to reduce ED crowding and improve patient outcomes, but complex change implementation is constrained by the necessity of maintaining concurrent safe patient-care. Computer modelling in a “virtual reality” has been successfully utilised in industries outside medicine, in providing innovative “real-time” solutions to outdated practices. Therefore a bespoke “Virtual ED” computer model, based on a Discrete Event Simulation (DES) -Based Framework was constructed to determine the …

The Impact Of 3pl’S Green Initiatives On The Purchasing Of Transport And Logistics Services: An Exploratory Study, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson, Edward Sweeney

Conference papers

There is a lack of research investigating the interaction and reciprocal influences between the buyer perspective and the supplier of transport and logistics services. Studies on the buyer perspective analyse the selection criteria to buy 3PL services, while research focused on green 3PL services examine initiatives undertaken by these companies to provide more environmentally sustainable services. The objective of this paper is to fill this void through an explorative case study analysis on the environmental attitude of 3PL companies in order to derive relevant implications for buyer’s behaviour. The results provide useful guidelines to buyers for understanding awareness, initiatives as …

Critical Success Factors In The Re-Engineering Of 21st Century Supply Chains, Edward Sweeney

Practitioner Journals

No abstract provided.

Integrating Balanced Scorecard And Simulation Modelling To Improve Emergency Department Performance In Irish Hospitals, Amr Arisha, Waleed Abo-Hamad, Khaled Ismail

Conference papers

In the healthcare sector, there is a requirement for innovative solutions in managing the high levels of complexity and uncertainty within Emergency Departments (EDs). Simulation modeling is currently seen as a competent means of analyzing EDs, which allows changes effects to be understood and predicted more easily. The Balanced Scorecard (BSC), well-known performance management concept, has become a steering method in approaching new improvement cycles. This paper presents a methodology that integrates BSC and simulation modeling to improve the performance of ED in a University Hospital in North Dublin. BSC design began with understanding patient's needs, ED activities, as well …

Combining Mobile Technologies For Accurate, Open Source, Privacy Sensitive, Zero Cost, Location Determination, Seamus Rooney

Doctoral

Determining the location of an object or individual using a mobile device (e.g. cell phone) is an important aspect of modern information gathering. Various solutions have been proposed which all have their strengths and weaknesses. To date, no solution has been devised for a mobile device that will work effectively in multiple environments and without assistance from network-provider connections1. To address this, it is argued that the current state of the art can be advanced using a hybrid approach that combines a number of sensor technologies to provide a more reliable, and accurate mobile location determination that functions in multiple …

Customer Management Analysis Of Irish Plumbing & Heating Distribution System: A Simulation Study, Amr Arisha, Amr Mahfouz, John Crowe, Finbarr Bennett

Conference papers

The sudden burst of the property bubble, coupled with current global economic conditions has resulted in a huge decrease in demand for plumbing and heating fixtures in the Irish construction industry. Moreover, inefficient supply chain management policies have imposed further pressures on companies resulting in more system bottlenecks and unnecessary costs. Inventory management is seen as a functional area that can ease such bottlenecks and in turn increase supply chain efficiency, decrease costs and increase customer satisfaction. The challenge is to predict the balance of on-hand inventory and order quantity to optimise customer satisfaction and minimise inventory cost. It is …

Practical Simulation Application: Evaluation Of Process Control Parameters In Twisted-Pair Cables Manufacturing System, Amr Mahfouz, Said Hassan, Amr Arisha

Articles

Intensive competition and rapid technology development of Twisted-Pair Cables (TPC) industry have left no room for competing manufacturers to harbour system inefficiencies. TPC are used in various communication and networks hardware applications; their manufacturing facilities face many challenges including various product configurations with different equipment settings, different product flows and Work in Process (WIP) space limitations. The quest for internal efficiency and external effectiveness forces companies to align their internal settings and resources with external requirements/orders, or in different words, significant factors must be set appropriately and identified prior to manufacturing processes. Integrated definition models (IDEF0, IDEF3) in conjunction with …

The Analysis Of Rush Orders Risk In Supply Chain: A Simulation Approach, Amr Arisha, Amr Mahfouz

Conference papers

Satisfying customers by delivering demands at agreed time, with competitive prices, and in satisfactory quality level are crucial requirements for supply chain survival. Incident of risks in supply chain often causes sudden disruptions in the processes and consequently leads to customers losing their trust in a company’s competence. Rush orders are considered to be one of the main types of supply chain risks due to their negative impact on the overall performance. Using integrated definition modeling approaches (i.e. IDEF0 & IDEF3) and simulation modeling technique , a comprehensive integrated model has been developed to assess rush order risks and examine …

Simulation Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo-Hamad

Articles

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is challenged by high levels of uncertainty in supply and demand, confl ict objectives, vagueness of information, numerous decision variables and constraints. With such levels of complexity, supply chain optimisation has the potential to make a signifi cant contribution in resolving these challenges. In this paper, a literature review – based on more than 100 peer-reviewed articles – of state-of-the-art simulation-based optimisation techniques in the context …

Simulation Model To Investigate Flexible Workload Management For Healthcare And Servicescape Environment, Michael Thorwarth, Paul Harper, Amr Arisha

Conference papers

High demand and poor staffing conditions cause avoidable pressure and stress among healthcare personnel which results in burnout symptoms and unplanned absenteeism which are hidden cost drivers. The work environment within an emergency department is commonly arranged in a flexible workload which is highly dynamic and complex for the outside observer. Using detailed simulation modeling within structured modeling methods, a comprehensive model to characterize the nurses' time utilization in such flexible dynamic workload environment was investigated. The results have been used to derive a generalized analytic expression that describes certain settings that lead to an instable queuing system with serious …

Enabling Rfid Technology In Irish Hospitals, Khaled Ismail, Amr Arisha

Conference papers

Hospitals represent a significant part of healthcare systems and account for no less than 60% of the entire healthcare service in most of developed countries. Therefore, improving service in hospitals is an important element to the process of healthcare reform. Better use of resources, more consistent quality, and a higher service level are the keys to rationalise the huge expenditure in healthcare systems due to higher growth in demand. Even though massive spending has been directed towards hospital improvement in Ireland, services provided in Irish hospitals are ranked relatively low comparing to the other European countries. Growth of population, aging, …

Risk Assessment Model For Emergency Departments In Dublin Hospitals, Michael Thorwarth, Amr Arisha

Conference papers

The internal dynamics of emergency departments (ED) in Irish hospitals represent complex non-linear stochastic systems with an environment of uncertainty, variability and limited resources. Planning and managing such systems pose overwhelming demands. To improve operations, patient service, resource planning, and real-time reaction to unexpected events, sophisticated tools to efficiently achieve these goals must be applied.

Advanced solution techniques (e.g. simulation and optimisation) have been successfully applied in manufacturing operations to improve the delivery, cost-effectiveness and service quality. Yet, random arrival of patients, limited resources and multitasking are challenges in EDs that add more complexity to this critical area. This study …

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

Learning Without Default: A Study Of One-Class Classification And The Low-Default Portfolio Problem, Kenneth Kennedy, Brian Mac Namee, Sarah Jane Delany

Conference papers

This paper asks at what level of class imbalance one-class classifiers outperform two-class classifiers in credit scoring problems in which class imbalance, referred to as the low-default portfolio problem, is a serious issue. The question is answered by comparing the performance of a variety of one-class and two-class classifiers on a selection of credit scoring datasets as the class imbalance is manipulated. We also include random oversampling as this is one of the most common approaches to addressing class imbalance. This study analyses the suitability and performance of recognised two-class classifiers and one-class classifiers. Based on our study we conclude …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

B2b E-Marketplaces In The Airline Industry: A Study On Process Drivers And Performance Indicators, Claudia-Maria Wagner, Bernd Huber, Edward Sweeney

Practitioner Journals

No abstract provided.

Requirements Gathering For Simulation, John Ryan, Cathal Heavey

Conference papers

This paper discusses the current shortfalls in support for the pre-coding phases of a discrete event simulation project. The paper then presents a process modelling technique, Simulation Activity Diagrams (SADs), developed to specifically support the initial requirements gathering phases of a simulation project. The paper concludes with an outline of proposed future developments to the modelling technique.

Process Modeling For Simulation, John Ryan, Cathal Heavey

Articles

This paper discusses shortfalls in relation to the requirements gathering phases of simulation. While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the requirements gathering phase. This is surprising as it has been reported by several researchers that the requirements phase can absorb twice as much resources as the coding phase. There are numerous process modeling tools available (over 100) that can and have been used to support the requirements phase of simulation. This paper provides a selective review of some of the most important in relation …

Simulation In Semiconductor Manufacturing Facilities, Amr Arisha, Paul Young

Conference papers

Semiconductor manufacturing is one of the most complex industries in terms of technology and manufacturing procedure. The life cycle of a semiconductor facility (FAB) has many phases, in their life cycle including capacity planning, new products introduction, variation of products/technologies, and decline phase. The complexity of the manufacturing and the external forces from markets and technology growth make predicting the effects of changes in the manufacturing system problematic. Simulation, if used correctly, is a powerful hands-on tool which may be used to give a better insight of the effect of engineering/management decisions on the performance of the manufacturing system. While …

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

Evaluating The Impact Of Production Scheduling On Tool Performance, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Simulation provides an effective decision support tool in scheduling of semiconductor manufacturing. Simulation model was developed as a risk assessment tool for one of the implant process area. The model examines the impact of production schedule on tool performance by testing different production scenarios. Production ramping, local buffer capacity, product sequence and product mix seem to be influential factors of the …

Intelligent Simulation-Based Lot Scheduling Of Photolithography Toolsets In A Wafer Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Photolithography, being one of the processes repeated often, is a fabrication bottleneck. Lot scheduling within photolithography is a challenging activity where substantial improvements in factory performance can be made. The proposed scheduling methodology integrates two common approaches, simulation and artificial intelligence. Using detailed simulation modeling within a structured modeling method, a comprehensive model to characterize the photolithography process was developed. An …

Thin-Film Simulation Model For Comparing Production Schedules In A Semiconductor Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Analysis of advanced manufacturing systems in any manufacturing industry requires certain level of knowledge about the system. Flexible manufacturing cells, in particular, are commonly used in most wafer fabrication to provide the ability to change product without requiring the construction of new manufacturing plant. This level of flexibility comes at a significant capital cost and, in order to achieve the maximum potential of each cell, it is essential to characterize and establish the performance of these cells in detail before a new production plan is implemented. Using state-of-the-art computer simulation and a structured modelling methodology a generic model of flexible …

Applications Of Simulation In Semiconductor Manufacturing Facilities, Amr Arisha, Paul Young

Conference papers

Semiconductor fabrication facilities face many challenges through the many phases of their life cycle including design, build, various production ramps, and many levels of production. Confronted with global competition and rapidly changing technology and customer requirements, there is an increasing demand for rapid solution techniques to improve efficiency in manufacturing. The complexities and forces of both market and the process combine to make the use of simulation crucial at many different planning and control levels. While not a panacea for sustainable performance, simulation provides an effective vehicle for defining the path from competitive concepts to real world solutions and gives …

Evaluation Of Scheduling Strategies On The Performance Of A Flexible Manufacturing Cell:A Simulation Study, Amr Arisha, Paul Young, Mohie El Baradie

Conference papers

The current trend in semiconductor manufacturing is characterized by expanding product variety, decreasing lead times from order to delivery, exacting standards of quality, and competitive prices. One possible means of achieving this is in the form of increased flexibility. Providing flexibility is typically an expensive proposition so, industrial engineers aim to provide more economic approaches to enable flexible manufacturing cells and related equipment to operate appropriately in an efficient manner. It is essential to characterize these tools in detail before the production plans are finalized. Using state-of-the-art computer simulation, a generic model of photolithography tools has been developed. The model …

A Simulation Model To Characterize Photolithography Process Of A Semiconductor Wafer Fabrication, Amr Arisha, Paul Young, Mohie El Baradie

Articles

The pressures on semiconductor manufacturers due to cost considerations, rapid growth of process technology, quality constraints, feature size reduction, and increasingly complex products are requiring ever higher efficiency from manufacturing facilities. The complexity of manufacturing high capacity semiconductor devices means that it is impossible to analyze the process control parameters and the production configurations using traditional analytical models. There is, therefore, an increasing need for effective models of each manufacturing process, characterizing and analyzing the process in detail, allowing the effect of changes in the production environment on the process to be predicted. The photolithography process is one of the …

Simulation Activity Diagrams, John Ryan, Cathal Heavey

Conference papers

This paper presents a technique, Simulation Activity Diagrams (SAD), developed to lessen the modelling burden during the initial requirements gathering phases of a simulation project. The technique also allows the capture and visual communication of detailed information, to manufacturing personnel, which may otherwise be lost in detailed programming code.

A Simulation Model To Characterize Photolithography Process Of A Semiconductor Wafer Fabrication, Amr Arisha, Paul Young, Mohie El Baradie

Conference papers

The pressures on semiconductor manufacturers due to cost considerations, rapid growth of process technology, quality constraints, feature size reduction, and increasingly complex devices are increasing requiring ever higher efficiency from the manufacturing facilities. The complexity of manufacturing high capacity semiconductor devices means that it is impossible to analyze the process control parameters and the production configurations using traditional analytical models. There is, therefore, an increasing need for effective models of each manufacturing process, characterising and analyzing the process in detail, allowing the effect of changes in the production environment on the process to be predicted. The photolithography process is one …

On The Selection Of Simulation Software For Manufacturing Application, Amr Arisha, Mohie El Baradie

Conference papers

The growing complexity of manufacturing along with the need for higher efficiency, greater flexibility, better product quality and lower cost urged the use of simulation in manufacturing systems. The number and variety of simulation software packages on the market increased as well. Consequently, the varieties of these packages led to some bewilderment on the part of potential users when faced the selection process. The present article addresses an overview of material addressed in journals, conferences, and textbooks on the selection of appropriate simulation software. It also suggests a classification of main criteria to be considered in evaluating simulation software packages. …