Operations Research, Systems Engineering and Industrial Engineering Commons^™

Determination Of A Flexibility Range For Cellular Manufacturing Systems Under Product Mix Variations, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

One of the underlying assumptions in cellular manufacturing is that product mix is relatively stable over time. In this paper, a procedure for the sensitivity analysis of the performance of a cellular manufacturing system with respect to changes in the product mix is presented and a flexibility range representing the capability of the system in dealing with these changes is determined using simulation modelling. The simulation results in this study show that as the changes in the product mix increase the superiority of the performance of the cellular manufacturing system to the corresponding job shop system diminishes.

Acuta Enews December 1997, Vol. 26, No. 12

ACUTA Newsletters

In This Issue

Sixth Annual Institutional Excellence Awards Competition

Slamming on the Rise

President's Column

Slamming

Board Report

A Great Seminar

Board Approves New Appointments

Meet Me at.... UM

Technology Timetable

On the Move

1998 ACUTA Events

Spotlight

DC at a Glance

Journal Editorial Calendar for 1998

Welcome New Members

Acuta Enews November 1997, Vol. 26, No. 11

ACUTA Newsletters

In This Issue

Second Annual ACUTA Student Paper Competition

SLCC Telecom Bails Out

Board Report

SLCC

President's Column

Negotiating a Wireless Contract

Seminar Looks at Networks, Legislative & Regulatory Issue

Is There a Back Door to Your Long Distance?

DC at a Glance

Welcome New Members

Rat Wire Schools

Spotlight

Acuta Enews October 1997, Vol. 26, No. 10

ACUTA Newsletters

In This Issue

Marketing Ethernet at Mizzou

Board Report

President's Message

Maximizing Call Center Potential

Welcome New Members

ACUTA Committees at Work

Spotlight

Mizzou

Marketing Committee Needs You!

Lisa Cheshire, CMP

Semer Chairs ASAE Technology Section

DC at a Glance

ACUTA Event Calendar

"Telco Network Whale"

Modeling And Comparison Of Wormhole Routed Mesh And Torus Networks, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

2D-mesh and torus networks have often been proposed as the interconnection pattern for parallel computers. In addition, wormhole routing has increasingly been advocated as a method of reducing latency. Most analysis of wormhole routed networks, however, has focused on the torus and the broader class of k-ary n-cubes to which it belongs. This paper presents a performance model for the wormhole routed mesh, and it compares the performance of the mesh and torus based on theoretical and empirical analyses.

Acuta Enews September 1997, Vol. 26, No. 9

ACUTA Newsletters

In This Issue

Telecom Goes Marketing

Board Report

President's Message

Marketing Telecom

Thanks to Sprint for Sponsoring Directory

User Groups Meet in Atlanta and Online

Resource Library Update

Last Call for Directory Updates!

On the Move....

Guide to Distance Learning Available

Internet Call Manager

Spotlight

DC at a Glance

Welcome New Members

ACUTA Event Calendar

Acuta Enews August 1997, Vol. 26, No. 8

ACUTA Newsletters

In This Issue

26th Annual Conference: Highlights from Atlanta

Board Report

President's Message

Rains Came Down, Floods Came Up

Faster Internet Access Over Existing Wiring

Spotlight

Directory Update

Welcome New Members

DC at a Glance

ACUTA Event Calendar

Instant Info

An Improved Analytical Model For Wormhole Routed Networks With Application To Butterfly Fat-Trees, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

A performance model for wormhole routed interconnection networks is presented and applied to the butterfly fat-tree network. Experimental results agree very closely over a wide range of load rate. Novel aspects of the model, leading to accurate and simple performance predictions, include (1) use of multiple-server queues, and (2) a general method of correcting queuing results based on Poisson arrivals to apply to wormhole routing. These ideas can also be applied to other networks.

Dynamic Stability Of Two Tractor Front-End Loader Systems, Michael J. Bader, Linus R. Walton, Larry G. Wells

Biosystems and Agricultural Engineering Faculty Publications

A one-quarter scale model tractor and loader were designed, fabricated, and used in an experiment to evaluate two tractor-loader configurations relative to stability using roll angle as the means of assessment. The nonconventional loader system consisted of a conventional loader attached to a steerable carrier which in turn was attached to the tractor by the front axle and drawbar of the tractor. The stabilizing axle for the non-conventional loader system was the front axle as opposed to the conventional system in which the stabilizing axle was the rear axle. The experiment showed that the non-conventional loader had an inherent advantage …

A Value Function Approach To Information Operations Moe's: A Preliminary Study, Michael P. Doyle, Richard F. Deckro, Jack M. Kloeber Jr., Jack A. Jackson Jr., Center For Modeling, Simulation, And Analysis, Air Force Institute Of Technology

AFIT Documents

A value focused thinking approach is applied to information operations. A preliminary value hierarchy for information operations is constructed by extracting the values of senior military leadership from existing doctrine. To identify these key values for information operations, applicable existing doctrine was reviewed and summarized. Additionally, hierarchical representations of the values represented within each reviewed doctrine are developed. A value hierarchy requires that supporting objectives be mutually exclusive and collectively exhaustive. Within this analysis, these requirements are enforced, in part, by developed definitions which serve as tests to maintain mutual exclusivity. An exhaustive set of supporting values is also guaranteed …

Acuta Enews July 1997, Vol. 26, No. 7

ACUTA Newsletters

In This Issue

ACUTA Conference Webcast

Board of Directors 1997-98

Board Report

President's Message

Welcome New Members

Music on Hold: Too Soft... Too Loud

Voicemail: Technology We Love to Hate

Spotlight

Anniversaries to Be Recognized

DC at a Glance

Supreme Court Rules Against Communications Decency Act

Engineering Management And Industrial Engineering: Six One Way, A Half Dozen The Other, Susan L. Murray, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

To some people engineering management (EM) is a specialty within Industrial Engineering (IE), to others EM is broader than IE. Comparing the histories of the two disciplines shows a clear distinction. Both disciplines have their roots in the work of engineering pioneers at the turn of the century. Work in motion and time study, along with other efficiency driven techniques, was the beginning of IE. Both IE and EM can trace their roots to the era of scientific management and the work of the early pioneers. A noted change for IE occurred after World War II when many programs shifted …

Integrating Core Industrial Engineering Courses Through A Manufacturing Case Study, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents a summary of research conducted by a team of students from the University of Missouri-Rolla. The manufacturing processes at a local firm were evaluated. The case study illustrates the benefits of applying ergonomic, safety, work measurement, and quality assessment tools together. Additionally this team approach illustrates the importance of educating engineering students to think across course and discipline lines. The paper concludes with generalized recommendations for other educational applications.

Development Of A Mechatronics Design Studio, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is a combination of mechanics, electronics and information technology intended to raise the intelligence level and flexibility of products and devices. There is a need to develop programs and laboratories in Mechatronics to create an understanding of how new technologies influence the traditional methods of designing products and manufacturing systems. A model "Mechatronics Design Studio" has recently been developed to support the Mechatronics and Manufacturing Automation courses offered at Cal Poly's Industrial and Manufacturing Engineering Department. Laboratory experiments have been developed and several student projects have been completed. In this paper, an overview of the design studio and select …

Acuta Enews June 1997, Vol. 26, No. 6

ACUTA Newsletters

In This Issue

University of North Dakota Weathers Flood

Board Report

Welcome Donna

Calling All Authors

Internet 2 Goals

Welcome New Members

Spotlight

DC at a Glance

Competition Comes to Canada Telecom

FCC Modifies Caller ID

Acuta Enews May 1997, Vol. 26, No. 5

ACUTA Newsletters

In This Issue

Slate of Nominees Approved

Be a Moderator of Monitor at ACUTA's 26th Annual Conference

Board Report

Univ. of Delaware to Host ACUTA Mid-Atlantic & New England Local Event

Dues Notices Mailed

Welcome Melanie

ACUTA Committees at Work

Spotlight

DC at a Glance

Regulation of BOC Long Distance Services Revised

Welcome New Members

A Robust Unit Commitment Algorithm For Hydro-Thermal Optimization, Chao-An Li, Chung-Li Tseng, E. Hsu, R. B. Johnson, A. J. Svoboda

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents a unit commitment algorithm which combines the Lagrangian relaxation (LR), sequential unit commitment (SUC), and optimal unit decommitment (UD) methods to solve a general hydro-thermal optimization (HTO) problem. The authors argue that this approach retains the advantages of the LR method while addressing the method''s observed weaknesses to improve overall algorithm performance and quality of solution. The proposed approach has been implemented in a version of PG&E''s HTO program, and test results are presented.

Acuta Enews April 1997, Vol. 26, No. 4

ACUTA Newsletters

In This Issue

Achievement Award Nominations

Listserve Discusses Directory Assistance

Board Report

ATM at UNM

E-mail Etiquette

Spotlight

DC at a Glance

"Internet 2" Links North Carolina

Welcome New Members

Members on the Move

Acuta Enews March 1997, Vol. 26, No. 3

ACUTA Newsletters

In This Issue

Student Paper Competition Nears Deadline

U.S. Court of Appeals stays FCC Detariffing Order

Board Nominations Due April 12

Welcome New Members

Board Report

Same as Sales, But No Commission

Spotlight

DC at a Glance

Publications Committee

ACUTA Membership Renewal

Acuta Enews February 1997, Vol.26, No. 2

ACUTA Newsletters

In This Issue

Call for Nominations for 1997-98

ACUTA Board of Directors

Effective Presentations

Board Report

Welcome New Members

Is It a Virus- Or a Hoax?

Vendor Liaison Committee

DC at a Glance

FCC Designates Wireless Spectrum for School

FCC Extends Campus Station License Terms

Coming Soon to Your IXC: 10XXX Changes

Telecommunications And Its Practical Application, Athol, Massachusetts, Center For Economic Development

Center for Economic Development Technical Reports

Rural areas have been experiencing a transition in their economic and social structure. Traditional industries such as agriculture, manufacturing, and resource extraction have been declining. The result has been a displacement of labor in rural areas and instability within rural economies. Upwards of three quarters of rural counties have experienced outmigration in the last decade. Per capita income in rural areas is only two-thirds that of their urban counterparts, and rural poverty rates exceed those in urban areas. Rural areas have traditionally considering how the quality of their education, health, and government services can be incorporated into their overall development …

Corrosion Fatigue Crack Growth Behavior Of Aircraft Materials, Tarun Goswami, D. W. Hoeppner

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The effects of test parameters on the corrosion fatigue crack growth behavior of structural materials have been examined in this paper. Test parameters such as stress ratio, frequency, hold time, temperature, pH level of the media, and other parameters are known to alter the corrosion fatigue crack growth rates in structural materials. Numerous laboratory test variables that affect the crack growth and/or corrosion growth rates, which in an operating environment of an aircraft are not characterized, are reviewed. A summary of such information may help determine the inspection intervals of the new and aged airplanes, perform the inspections, and develop …

Review Of Pit Nucleation, Growth And Pitting Corrosion Fatigue Mechanisms, Tarun Goswami, D. W. Hoeppner

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This paper presents a review of the state of the art developments in the pitting corrosion fatigue of aircraft structural materials. Mechanisms that govern the nucleation and growth of pitting and corrosion fatigue (CF) are briefly addressed. Some of the developments made in the author's laboratories in proposing the fretting induced pit nucleation and growth mechanisms, analysis of the hidden corrosion constituents in fuselage joints and pitting corrosion fatigue crack growth (PCFCG) model are elucidated. An epistemology of the topic is presented which will be of assistance to the community working in this area.

An Integrated Approach To Simulation And Activity-Based Costing For Evaluating Alternative Manufacturing Cell Designs, Robert Williams, Paul Savory, Rodney Rasmussen

Department of Industrial and Management Systems Engineering: Faculty Publications

One effective technique for improving manufacturing efficiency involves the application of group technology part families and manufacturing cells. Selection of the best or optimum configuration of the manufacturing cell relies on the experience and judgment of the cell designer. This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model and be used to evaluate manufacturing cell configurations. The output of the combined ABC simulation model provides a detailed “Bill of Activity” which allows the cell designer to consider costs as a critical factor in the cell design problem. Alternative cell configurations studied in this …

Simulating Queue Scheduling Policies For A Spacecraft Simulator, Paul Savory, Gene Saghi

Department of Industrial and Management Systems Engineering: Faculty Publications

The mission of the Cassini spacecraft is a unique opportunity to gain insights into major scientific questions about Saturn, the creation of the solar system, and the conditions that led to life on Earth. In preparation for the launch, NASA's Jet Propulsion Laboratory developed a software simulator to emulate the hardware data-control system of the spacecraft. Its primary use is to validate and verify commands that will be transmitted to the spacecraft. To improve the performance of the simulator, we used the SIMAN simulation language to model numerous queue-scheduling policies. Implementation of the simulation results combined with a software-code redesign …

Selecting For Random Drug Testing At Union Pacific Railroad, Jennifer Meyer, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Many industries have recently implemented programs to detect and deter the use of recreational drugs in the workplace. The transportation industry has received careful government attention, particularly where the safety of the public may be seriously affected by employees who use drugs. Following federal guidelines, Union Pacific Railroad first implemented a random drug-testing plan in 1990. Because the assigned jobs, shifts, and work locations of many railroad employees change frequently, defining the selection population was particularly challenging. In its continuing efforts to validate and improve this plan, Union Pacific Railroad sought an external evaluation to determine the fairness of its …

An Aggregation Procedure For Simulating Manufacturing Flow Line Models, Paul Savory, Gerald Mackulak

Department of Industrial and Management Systems Engineering: Faculty Publications

We develop a formal method for specifying an aggregate discrete-event simulation model of a production flow line manufacturing system. The methodology operates by aggregating production stations or resources of a flow line. Determining the specifications for representing the aggregated resources in a simulation model is the focus of our presentation. We test the methodology for a set of flow lines with exponentially distributed arrival and service times. Comparisons between analytical and simulation results indicate the aggregation approach is quite accurate for estimating average part cycle time.

Acuta Enews January 1997, Vol.26, No. 1

ACUTA Newsletters

In This Issue

Do You Have a Voice Mail Handbook?

A Few Words of Advice

Board Report

ACUTA Journal: Second Issue Topics

Membership Committee

Reimbursing Personal Calls

Editorial Board Named

DC at a Glance

WCU on the Cutting Edge

Interstate Long Distance Tariffs Eliminated

Block it, again

Welcome New Members

Analytical Models For Vehicle/Gap Distribution On Automated Highway Systems, Jacob Tsao, Randolph W. Hall, Indrajit Chatterjee

Faculty Publications

Highway congestion has in recent years become a pervasive problem for urban and suburban areas alike. The concept of Automated Highway Systems is based on the belief that integration of sensing, communication, and control technologies into vehicles and highways can lead to a large improvement in capacity and safety without requiring a significant amount of additional highway right-of-way. A fundamental determinant of Automated Highway Systems capacity is the vehicle-following rule, the rule that governs the behavior of vehicles traveling along a common lane (e.g., the spacing between any two longitudinally adjacent vehicles). Vehicle following affects the longitudinal capacity (achievable flow …

Dwell Sensitivity Fatigue Behaviour Of High Temperature Materials, Tarun Goswami, G. R. Halford, D. W. Hoeppner

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The dwell sensitivity fatigue behavior of six high temperature materials is examined in this paper: two stainless steels, 304L and 304, two tantalum alloys, Τ- Ι 11 and ASTAR 811C, pure nickel Ni 201 and a single crystal nickel-base superalloy, PWA 1480. The stainless steel alloys were found to be tensile dwell sensitive; however, a saturation in dwell sensitivity was found with the increase in strain range for all materials examined. At lower strain ranges the dwell cycles were producing lower lives than at higher strains, as found in the case of AISI SS 304 and two tantalum based alloys, …