Operations Research, Systems Engineering and Industrial Engineering Commons^™

Investigation Into Current Efficiency For Pulse Electrochemical Machining Of Nickel Alloy, Yu Zhang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

INVESTIGATION INTO CURRENT EFFICIENCY FOR PULSE ELECTROCHEMICAL MACHINING OF NICKEL ALLOY

Yu Zhang, M.S.

University of Nebraska, 2010

Adviser: Kamlakar P. Rajurkar

Electrochemical machining (ECM) is a nontraditional manufacturing process that can machine difficult-to-cut materials. In ECM, material is removed by controlled electrochemical dissolution of an anodic workpiece in an electrochemical cell. ECM has extensive applications in automotive, petroleum, aerospace, textile, medical, and electronics industries.

Improving current efficiency is a challenging task for any electro-physical or electrochemical machining processes. The current efficiency is defined as the ratio of the observed amount of metal dissolved to the theoretical amount predicted from …

A Methodology To Evaluate Obsolete Inventory In Health Care, Rama Thummalapalli

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Many organizations are currently facing inventory management problems such as distributing inventory on-time and maintain the correct inventory levels to satisfy the customer or end users. Organizations understand the need for maintaining the accurate inventory levels but sometimes fall short leading a wide performance gap in maintaining inventory accurately. The inventory inaccuracy can consume much of the investment on purchasing inventory and many times leads to excessive inventory. The research objective of thesis is to provide a decision making criteria to the management for closing or maintaining the warehouse based on basic purchasing and holding cost information. The specific objectives …

The Use Of Factor Analysis In The Development Of Hand Sizes For Glove Design, Trevor M. Mclain

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female …

Evaluation Method For Strategic Investments, Olabode Alabi

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Real Options Analysis (ROA) has become a complimentary tool for engineering economics. It has become popular due to the limitations of conventional engineering valuation methods; specifically, the assumptions of uncertainty. Industry is seeking to quantify the value of engineering investments with uncertainty. One problem with conventional tools are that they may assume that cash flows are certain, therefore minimizing the possibility of the uncertainty of future values. Real options analysis provides a solution to this problem, but has been used sparingly by practitioners. This paper seeks to provide a new model, referred to as the Beta Distribution Real Options Pricing …

Using Electronic Faculty Course Portfolios To Showcase Classroom Practices And Student Learning, Paul Savory, Amy M. Goodburn

Department of Industrial and Management Systems Engineering: Faculty Publications

Faculty course portfolios are a valuable medium for documenting and making visible the serious intellectual work of teaching. Developing a faculty course portfolio follows the same process one uses to explore a research question. Faculty members inquire, analyze, and document their teaching practices and the resulting student learning and then make the results accessible for use, review, and assessment by one’s peers. In this article, we introduce four types of electronic course portfolios that sponsor different forms of inquiry into student learning. We highlight the major components of each type, offer advice in developing them, and share examples of each. …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Rubric For Project Self-Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Presentation Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Strategic Plan For Industrial And Management Systems Engineering, Paul Savory

Industrial and Management Systems Engineering: Reports

The role of this strategic plan is to map out a range of department goals, offer objectives for achieving each goal, and list potential strategies for meeting an objective. It also lists performance metrics for measuring progress for each goal. Each year, a subset of goals and objectives will be identified by the IMSE department as a priority for the coming year. Detailed metrics for measuring improvement for the department’s priorities areas will then be defined. The department committee to develop the plan consisted of Dr. Paul Savory (committee chair), Dr. Susan Hallbeck, and Dr. Erick Jones.

Randomly Generating Manufacturing Flow Line Models Using Mathematica, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

To test heuristic algorithms and techniques, researchers need numerous datasets so as to measure effectiveness and improve approaches. This paper discusses using Mathematica, a mathematical programming language, for randomly generating the specifications for manufacturing flow line models. Important issues include determining an arrival rate to a flow line, the number of flow line stations, the number of parallel servers for each production station, and specifying the service time distributions and their associated parameters. The paper concludes with a discussion on generating more general types of simulation models.

How Do You Interpret A Confidence Interval?, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

A confidence interval (CI) is an interval estimate of a population parameter. Instead of estimating the parameter by a single value, a point estimate, an interval likely to cover the parameter is developed. Many student incorrectly interpret the meaning of a confidence interval. This paper offers a quick overview of how to correctly interpret a confidence interval.

Why Divide By (N-1) For Sample Standard Deviation?, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

In statistics, the sample standard deviation is a widely used measure of the variability or dispersion of a data set. The standard deviation of a data set is the square root of its variance. In calculating the sample standard deviation, the divisor is the number of samples in the data set minus one (n-1) rather than n. This often confuses students. This paper offers a quick overview of why the divisor is (n-1) for calculating the sample standard deviation.

Semester Project For Engineering Management, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

This is the semester-project for my IMSE 405/805 course on Engineering Management at the University of Nebraska-Lincoln. This team-based project required students to develop an operational plan (facility layout, required staffing, company operating policies, company benefits program) for a specified product.

Details And Description Of Operations Research, Paul Savory

Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Pre/Post Assessment Of Abilities, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

One approach to assess if students are learning in a course is to conduct a pre-test, post-test assessment of the course material. By comparing the two results, one can make an assessment of the knowledge learned in the course. For certain types of courses, it can be a challenge in defining an assessment instrument that measure student knowledge. This example is one I have developed for my IMSE 440/840 (Discrete Event Computer Simulation) course. Students are asked rate their ability for key course objectives defined on the course syllabus. I administer it on the first day of the course and …

Semester Project For Engineering Management, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

This is the team-based, semester project for my advanced engineering management course at the University of Nebraska-Lincoln. This project focuses on having student teams plan a successful, professional, innovative and enjoyable professional conference. This is an activity that many of of them will have the opportunity to be involved with during their career. The project is divided into nine tasks with peer feedback and rework part of the process.

Imse Alumni Survey Of Abet Program Educational Objectives, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This report showcases the results of the Department of Industrial and Management System Engieering's survey of alumni regarding our updated ABET Program Educational Objectives. The Program Educational Objectives represent the expected characteristics of industrial engineering graduates within three to five years of receiving a Bachelor of Science degree in Industrial and Management Systems Engineering from the University of Nebraska-Lincoln. A total of 76 responses were received. The alumni survey responses indicate strong agreement and approval for the new Program Educational Objectives. The associated comments will be used by the IMSE faculty to future refine the course curriculum to ensure that …

A Template-Based Data Specification Framework For Modeling Physical Security Systems, Ashu Guru, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Simulation studies often fail to provide any useful results due to its success being highly dependent on the skills of the analyst to understand a system and then correctly identify all the required data parameters and dependent variables. This paper describes a template-based framework to help identify and specify the components and data parameters for developing models of physical security systems. The layered framework consists of fifteen templates built on top of fourteen data primitives representing 119 data parameters. The modeling framework has been programmed as an internet-based web application and is simulation language independent. The usefulness of the framework …

Class Exercise For Assessing Abilities And Providing A Structure For A Course, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I developed this class exercise to assess students abilities and to highlight the range of questions/issues that they will learn in my IMSE 440/840 (Discrete Event Computer Simulation) course. I draw a picture of the case scenario for students and explain the system’s operation to them. I then ask that they complete the questions regarding the system and/or how they would analyze it. Following class, I develop a summary of the range of student answers. At the next class session, I share the range of answers and share what my answers would be and how these questions/topics relate to what …

Details And Description Of Industrial Engineering, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This content paper addresses key questions for students interested in pursuing industrial engineering as an academic major: What is industrial engineering? What personality characteristics do Industrial Engineers have? What types of projects do Industrial Engineers work on? What types of jobs do Industrial Engineers have? Where do Industrial Engineers work once they graduate? How much can Industrial Engineers earn? I have never heard of IE, is it a new area? How do Industrial Engineers benefit society and business? What classes will I take as an industrial engineering student? What are examples of problems I will learn how to solve? Are …

A Case Study Of Teaching A Quantitative Course Using Archived Streaming Video, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This case study highlights some of the issues and difficulties experienced in teaching a quantitative course using three methods of delivery: in-class to an audience of students, television broadcast over a satellite system to distance students, and archived streaming video accessible by students. The discussion is applicable to administrators and faculty exploring the option of teaching a course using multiple delivery approaches.

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

Discrete-Event Simulation: Simulation Practices And Trends, Paul Savory

Industrial and Management Systems Engineering: Presentations

Discrete-event computer simulation is one of industry’s most used operations research techniques. Its uses range from answering questions about work-in-process and production feasibility to comparing alternative plans for system routing and scheduling. This presentation offers a brief overview of practices and trends.

Semester Project For Engineering Entrepreneurship, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

This is the semester, team-based, student project required for my special topics course on Engineering Entrepreneurship. The semester project focuses on developing a preliminary business plan for a company. This will entail coming up with an idea, exploring the marketability of the idea, and developing preliminary plans for the business.

Course On Engineering Entrepreneurship, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

This is the syllabus and course note packet for students in my Engineering Entrepreneurship course. This special-topic class focuses on starting and managing a successful business. Topics will include: marketing, finance, human resources, operations, legal issues, initial public offering, and succession and estate planning. Due to the engineering background of the students, special emphasis will be on exploring the legal issues involved in the process of applying for a patent. The course will enable a student to evaluate his or her own desires and prospects for a career as an entrepreneur. In so doing, it will provide the aspiring entrepreneur …

A Simulation Based Experiment For Comparing Amhs Performance In A Semiconductor Fabrication Facility, Gerald Mackulak, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

As the cost and complexity of constructing a semiconductor fabrication facility increases, responsive tools are needed for designing and planning its operations. Discrete-event simulation paired with design of experiments is an effective combination. This article demonstrates how simulation in combination with design of experiments is used to compare the intrabay layout of two automated material handling systems. The difference in stocker robot utilization, number of vehicle moves per hour, and average delivery time for the two intrabay layouts will be compared using a fractional factorial experimental design. The study demonstrates that the distributed storage option is preferable for maximizing manufacturing …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an integrated simulation and activity-based management approach for determining the best sequencing scheme for processing a part family through a manufacturing cell. The integration is illustrated on a loop or U-shaped manufacturing cell and a part family consisting of four part types (A, B, C, and D). Production requirements for the cell demand that part batches be processed one type at a time. For example, all part A’s are processed until weekly demand is met, then part B’s, etc. The objective of this example is to determine the best part sequence (e.g., ABCD, DCBA or CABD). In …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

Discrete-event simulation is one of the most effective techniques for analyzing a manufacturing system. Unfortunately, little attention is given to using simulation models to estimate the economic impact of a proposed system configuration. This paper defines how activity-based costing (ABC) concepts can be incorporated into a discrete-event simulation model. Special emphasis is on demonstrating how decision making can be aided by having the simulation create a detailed “Bill of Activity” describing costs associated with manufacturing a part. The integration of ABC and simulation is illustrated by evaluating the impact of a proposed manufacturing cell configuration. The additional costing information aids …