Operations Research, Systems Engineering and Industrial Engineering Commons^™

Interventions Of Waterjet Technology In Skin Incisions, Nadi Atalla

Dissertations

This research explores the use of waterjet (WJ) technology in performing skin incisions. The study defines the analytical relationships between the skin properties and the operating parameters of the WJ which include the skin thickness, its elastic modulus, the WJ pressure, the nozzle’s orifice diameter, its stand-off distance and the traverse speed of the WJ as well as the duration of applying the WJ pressure. An analytical model is developed to measure the depth incision of the skin, the water pressure and the water velocity, while using a WJ. Systemization and optimization models that determine the optimal operating parameters levels …

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Optimization Of The Retention Rates Of Ready Mix Usa Drivers, Pruthvi Hira, Jaime Harmon, Kenneth Correa, Destiny Sessums

Senior Design Project For Engineers

Ready Mix USA, a CEMEX company, is a giant in the building materials industry, servicing the Southeastern region of the United States through various commercial and residential projects. The Atlanta Division of RMUSA currently consists of 15 operational plants in the state of Georgia with its headquarters located in Woodstock. From the years 2015 to 2018, managers at Ready Mix USA noticed a drastic increase in turnover rates of ready mix truck drivers and did not have an answer for the increasing percentages. The Continuous Improvement at RMUSA tasked the student project team from the Industrial and Systems Engineering department …

Optimization Of Automated Guided Vehicles (Agv) Fleet Size With Incorporation Of Battery Management, Ahmed Hamdy

Engineering Management & Systems Engineering Theses & Dissertations

An important aspect in manufacturing automation is material handling. To facilitate material handling, automated transport systems are implemented and employed. The AGV (automated guided vehicle) has become widely used for internal and external transport of materials. A critical aspect in the use of AGVs is determining the number of vehicles required for the system to meet the material handling requirements.

Several models and simulations have been applied to determine the fleet size. Most of these models and simulations do not incorporate the battery usage of the vehicles and the effect it can have on the throughput and the number of …

Applications Of A New Genetic Algorithm To Solve The Centralized Carrier Collaboration And Multihub Location Problem Considering Environmental Impacts, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

The Centralized Carrier Collaboration and Multi-hub Location Problem (CCCMLP) represents a strategy that small-to-medium sized less-than-truckload (LTL) carrier companies can use in order to improve their profit margins. It is a strategy that is being explored in order to make these companies more sustainable as they are forced to reinvent their processes and supply chains. In this work, I will present a metaheuristic approach to optimizing their hub establishment and routing policies in order to better their expected profit margins and reduce their environmental impacts. The study considers the costs of transportation, loading and unloading, maintenance, operations, and inventory holding …

Robust Allocation Of Funds For Nonstructural Flood Risk Mitigation In Coastal Louisiana, Simón Gómez Sierra, David R. Johnson, Matthew P. Shisler, Zachariah T. Richardson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coastal Louisiana is a critical economic, ecological and cultural asset, acting as a major hub for waterborne commerce, fisheries, and the petrochemical industry, and also as one of the world’s unique wetlands. Unfortunately, this rich environment is in great danger from the threat of hurricanes and storm surge flooding. Direct economic losses are estimated to average $2.7 billion per year under current conditions, and this could increase to $12 billion a year, or more, within 50 years if nothing is done. To prevent this catastrophe, Louisiana has developed a Comprehensive Master Plan for a Sustainable Coast, which plans to spend …

Process Improvement At "The Manse On Marsh", Kevin C. Manko

Industrial and Manufacturing Engineering

The Manse on Marsh is an independent and assisted living facility that prides itself on providing life-enriching care for the elderly. Considering that the staff is essential to supply this care and turnover rates are a constant factor, the company would like to reduce the time it takes to hire new employees by at least one week. To facilitate this goal, process flow maps are utilized to assess the current state of the hiring process and metrics are applied to support future state design decisions. After performing a value added analysis and identifying areas of waste, a total of 20 …

Healing Alternatives Workspace Remodel, Lissandra Ilcyn, Jenifer Astrid Colmenares, Grace E. Kuffner

Industrial and Manufacturing Engineering

Healing Alternatives is an acupuncture office space located in a repurposed house in San Luis Obispo. Healing Alternatives’ current facility layout does not allow for an additional treatment room or the space to provide additional services because of the wasted space within the facility. Furthermore, patients can be disrupted by noise outside the treatment room causing a negative customer experience. The project team’s objectives are to:

o Design two layout alternatives

o Provide a time estimate for each alternative

o Provide a cost analysis of each alternative

o Implement 5s methodology on the storage room

o Provide a 2D-3D model …

Vial Of Life Redesign, Andrew Scott Heim, Marisonn Manalo

Industrial and Manufacturing Engineering

Cambria Anonymous Neighbors (CAN), a nonprofit organization assisting the residences of Cambria, hopes to standardize first responder procedures and make medical information easily accessible in case of a medical emergency. Currently the container costs $3.78. CAN would like to provide 2000 containers at a lower cost. After researching materials, acrylic was found to be the best option for the container material due to its low cost and durability. A laser cutter was used to cut the acrylic pieces, and then a set of step by step instructions were created to assemble the product. To reduce the cost of acrylic, the …

Technical Project Management: Union Of Systems Engineering Processes With Project Management Processes, Deyaaldeen M. Abusal

Open Access Theses & Dissertations

Today, most projects in technical fields utilize project management to complete projects as planned, and some of the projects utilize system engineering to cover the project in both technically and commercially. This Thesis investigates the relationship between Project Management (PM) and Systems Engineering (SE) to determine if a suitably professional level of management and level of quality can be achieved. When studying PM and SE separately and make a comparison between both, there is much overlap between these two mature fields. The project could be planned and completed solely by either process. This study combines both fields of Project Management …

Modular Product Architecture’S Decisions Support For Remanufacturing-Product Service System Synergy, Johnson Adebayo Fadeyi

Wayne State University Dissertations

Remanufacturing is identified as the most viable product end-of-life (EOL) management strategy. However, about 80% of manufactured products currently end up as wastes. Besides other benefits, the product service system (PSS) could curtail the main bottlenecks to remanufacturing namely quantity, quality, recovery time of used product, and negative perception of remanufactured products. Therefore, the integration of PSS and remanufacturing has been increasingly recommended as an enhanced product offering. However, an integration that is informed by mathematical analysis is missing. Meanwhile, the variables that bolster the performance of PSS and remanufacturing are substantially influenced by product development (PD) decisions. Among the …

From Green Buildings To Green Supply Chains: An Integrated Input Output Life Cycle Assessment And Optimization Framework For Carbon Footprint Reduction Policy Making, N. Muhammad Aslaam, Gokhan Egilmez, Murat Kucukvar, M.Khurrum S. Butta

Mechanical and Industrial Engineering Faculty Publications

Purpose: This paper focuses on tracing GHG emissions across the supply chain industries associated with the U.S. residential, commercial and industrial building stock and provides optimized GHG reduction policy plans for sustainable development.

Design/Methodology/Approach: A two-step hierarchical approach is developed. Firstly, Economic Input Output-based Life Cycle Assessment (EIO-LCA) is utilized to quantify the GHG emissions associated with the U.S. residential, commercial and industrial building stock. Secondly, a mixed integer linear programming (MILP) based optimization framework is developed to identify the optimal GHG emissions’ reduction (%) for each industry across the supply chain network of the U.S. economy.

Findings: The results …

Optimization Models And Algorithms For Demand Response In Smart Grid., Guangyang Xu

Electronic Theses and Dissertations

For demand response in smart grid, a utility company wants to minimize total electricity cost and end users want to maximize their own utility. The latter is considered to consist of two parts in this research: electricity cost and convenience/comfort. We first develop a system optimal (SO) model and a user equilibrium (UE) model for the utility company and end users, respectively and compare the difference of the two. We consider users' possible preference on convenience over cost-saving under the real-time pricing in smart grid, and each user is assumed to have a preferred time window for using a particular …

Order Picking Strategies For Healthcare Warehouses., Ehsan Khodabandeh

Electronic Theses and Dissertations

Order picking is the process of collecting goods and items in specified quantities from storage locations, in response to customer orders. Since many labor resources are involved in this process, finding ways to make it more efficient have been a primary goal for researchers and practitioners. Determining a better allocation of products to the storage areas, finding the best route and sequence to pick multiple products, and choosing the best picking policies to minimize congestion in the aisles are just a few of many objectives regarding order picking process. Due to regulatory compliances and the chance of product spoilage, additional …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …

Optimization Of Rfid System Coverage In A Manufacturing Environment, Scott D. Malatesta

Master's Theses

This paper compiles existing ideas, theories, and experiments across multiple disciplines to provide guidance for a company looking to implement an optimal RFID system in their production facility. The desire is to maximize the information received by the system while minimizing the cost. Four potential layouts of RFID antennas, two with overlapping antenna coverage and two with non-overlapping layouts, are first analyzed to understand the special coverage and the number of antennas required. The value of information is then quantified to determine whether higher coverage layouts are worth the additional costs associated with the higher number of antennas required. It …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …

Warranty Period And Product Price Optimization For Remanufactured Products, Yuxi Liu

Theses and Dissertations

This study considers a remanufactured electrical product under a tiered warranty policy. Warranty is key in ensuring a good manufacturer—consumer relationship. Manufacturers hope to minimize warranty costs while consumers believe that good warranty promises better product quality and reliability. This Thesis presents an optimal warranty period from the perspective of a manufacturer to maximize the total expected profits, while ensuring sustained consumer relation. We use real data from a local company with a global supply chain to provide a numerical example.

Guidelines For Scheduling In Primary Care: An Empirically Driven Mathematical Programming Approach, Hyun Jung Alvarez Oh

Doctoral Dissertations

Primary care practices play a vital role in healthcare delivery since they are the first point of contact for most patients, and provide health prevention, counseling, education, diagnosis and treatment. Practices, however, face a complex appointment scheduling problem because of the variety of patient conditions, the mix of appointment types, the uncertain service times with providers and non-provider staff (nurses/medical assistants), and no-show rates which all compound into a highly variable and unpredictable flow of patients. The end result is an imbalance between provider idle time and patient waiting time. To understand the realities of the scheduling problem we analyze …

Developing An Optimal Model For Infant Home Visitation, Isaac Atuahene

Doctoral Dissertations

The United States, Great Britain, Denmark, Canada and many other countries have accepted home visitation (HV) as a promising strategy for interventions for infants after births and for their mothers. Prior HV studies have focused on theoretical foundations, evaluations of programs, cost/benefit analysis and cost estimation by using hospital/payer/insurance data to prove its effectiveness and high cost. As governments and private organizations continue to fund HVs, it is an opportune time to develop and formulate operations research (OR) models of HV coverage, quality and cost so they might be used in program implementation as done for adult home healthcare (HHC) …

Strasbaugh Nonconforming Report Optimization, Eden Andersen, Angela Asgekar, Rebecca Gregg

Industrial and Manufacturing Engineering

This paper strives to convey the problems and proposed solutions for Strasbaugh’s Nonconforming Report (NCR) Optimization. Strasbaugh is a world leader in silicon wafer polisher and grinder technologies. After a significant down size to the company parts they used to manufacture now have to be purchased, and many of these incoming parts do not conform to Strasbaugh’s high standards. This has led to an increase in NCRs that need to be processed, which takes up time, resources and money.

The objective therefore became to update the multi-sheet carbon copy paper system to better optimize the use of these reports and …

Runway Operations Management: Models, Enhancements, And Decomposition Techniques, Farbod Farhadi

Doctoral Dissertations

Air traffic loads have been on the rise over the last several decades and are expected to double, and possibly triple in some regions, over the coming decade. With the advent of larger aircraft and ever-increasing air traffic loads, aviation authorities are continually pressured to examine capacity expansions and to adopt better strategies for capacity utilization. However, this growth in air traffic volumes has not been accompanied by adequate capacity expansions in the air transport infrastructure. It is, therefore, predicted that flight delays costing multi-billion dollars will continue to negatively impact airline companies and consumers. In airport operations management, runways …

Optimizing Boat Hull And Deck Mold Storage Scheduling With Linear Programming, Tron Bjorn Dareing

Masters Theses

With a wide range of products, Sea Ray uses a vast amount of large boat molds for each of the different boat models. Storing and transporting these molds can be an issue with introducing high variability in the production process. One of the largest problems deals with the utilization of the employees’ time with the large amount of boat production. Having the boat molds being ready for production is a critical part of the manufacturing of quality boats. There is non-value added time spent on preparing the molds for the lamination process and storing them in various areas. This problem …

A Stochastic Model For Self-Scheduling Problem, Lili Zhang

Masters Theses

The unit commitment (UC) problem is a typical application of optimization techniques in the power generation and operation. Given a planning horizon, the UC problem is to find an optimal schedule of generating units, including on/off status and production level of each generating unit at each time period, in order to minimize operational costs, subject to a series of technical constraints. Because technical constraints depend on the characteristics of energy systems, the formulations of the UC problem vary with energy systems. The self-scheduling problem is a variant of the UC problem for the power generating companies to maximize their profits …

Strategies To Improve The Efficiency Of Emergency Medical Service (Ems) Systems Under More Realistic Conditions, Kanchala Sudtachat

All Dissertations

Emergency medical service (EMS) systems provide medical care to pre-hospital patients who need rapid response and transportation. This dissertation proposes a new realistic approach for EMS systems in two major focuses: multiple unit dispatching and relocation strategies. This work makes recommendations for multiple-unit dispatch to multiple call priorities based on simulation optimization and heuristics. The objective is to maximize the expected survival rate. Simulation models are proposed to determine the optimization. A heuristic algorithm is developed for large-scale problems. Numerical results show that dispatching while considering call priorities, rather than always dispatching the closest medical units, could improve the effectiveness …

Poisson Distributed Individuals Control Charts With Optimal Limits, Negin Enayaty Ahangar

Graduate Theses and Dissertations

The conventional method used in attribute control charts is the Shewhart three sigma limits. The implicit assumption of the Normal distribution in this approach is not appropriate for skewed distributions such as Poisson, Geometric and Negative Binomial. Normal approximations perform poorly in the tail area of the these distributions. In this research, a type of attribute control chart is introduced to monitor the processes that provide count data. The economic objective of this chart is to minimize the cost of its errors which is determined by the designer. This objective is a linear function of type I and II errors. …

A Heuristic Algorithm For Determining The Part Set In A Powder-Bed Additive Manufacturing Machine., Sonja Dieder

Electronic Theses and Dissertations

The goal of this research is to develop a procedure for the placement of a priority part into a planned build in a powder-bed additive manufacturing machine. Toward that goal, a heuristic procedure was developed that seeks to maximize the revenue in a scheduled build, subject to due-date constraints; i.e., all parts with the closest due date will not only be included in the build, but will be placed near the bottom of the build. Likewise, any part in the scheduled build that does not have an immediate due date is a candidate for removal in order to accommodate a …

Modeling Preventive Maintenance In Complex Systems, Jessica Rivas

Open Access Theses

This thesis presents an explicit consideration of the impacts of modeling decisions on the resulting maintenance planning. Incomplete data is common in maintenance planning, but is rarely considered explicitly. Robust optimization aims to minimize the impact of uncertainty--here, in contrast, I show how its impact can be explicitly quantified. Doing so allows decision makers to determine whether it is worthwhile to invest in reducing uncertainty about the system or the effect of maintenance. The thesis consists of two parts. Part I uses a case study to show how incomplete data arises and how the data can be used to derive …

Performance Analysis And Scheduling Strategies For Ambulatory Surgical Facilities, Xuanqi Zhang

Dissertations

Ambulatory surgery is a procedure that does not require an overnight hospital stay and is cost effective and efficient. The goal of this research is to develop an ASF operational model which allows management to make key decisions. This research develops and utilizes the simulation software ARENA based model to accommodate: (a) Time related uncertainties – Three system uncertainties characterize the problem (ii) Surgery time variance (ii) Physician arrival delay and (iii) Patient arrival delay; (b) Resource Capture Complexities – Patient flows vary significantly and capture/utilize both staffing and/or physical resources at different points and varying levels; and (c) Processing …

Hosx: Hospital Operations Excellence Model, Shivon S. Boodhoo

Dissertations

Hospital performance can be evaluated in four categories: (i) quality of care, (ii) process of care (iii) financial and (iv) operations productivity. Of these, ‘quality of care’ is the most widely reported and studied measure of performance, and focuses primarily on the clinical outcomes of the patient. In contrast, operations productivity and efficiency is the least studied measure, and currently there is limited ability to evaluate how efficiently the hospital has used its resources to deliver healthcare services. Cost containment in the healthcare industry is a challenging problem, and there is a lack of models and methods to benchmark hospital …