Operations Research, Systems Engineering and Industrial Engineering Commons^™

The Music Bluetooth Controller: An Intersection Between Technology And Music, Lydia Wu

Senior Honors Theses

The modern musician faces a new challenge: how can technology be used to enhance a performance? This thesis documents the development of a Bluetooth remote controller that will aid today’s performing musicians by interacting with a digital display (e.g., an iPad) to flip musical score pages remotely. At its core, while mimicking a Bluetooth pedal (the current industry standard), this device attaches to the musician’s hand. In its pilot stages, the device has been referred to “MBC” (Music Bluetooth Controller).

Raw And Pure Education In The Society, Iwasan D. Kejawa Ed.D

Department of Educational Administration: Dissertations, Theses, and Student Research

What does education mean to individuals in the world today? Education is a way one can attain or improve his or her ability to lead and survive in the society of ours. Without educational training of the mind, it may be impossible to realize the importance of adaptability of living in the environment. Without education, It may also be difficult to embellish the use of both the mental and physical attributes possessed by individual beings.

What really is education? Education is the training of the mind to perform desire functions or to perpetuate the modality of obtaining an end or …

An Exploratory Study Of Engineering Students’ Misconceptions About Technical Communication, Cheryl Q. Li, Judy Randi, Jenna Sheffield

Engineering and Applied Science Education Faculty Publications

This paper reports results of a mixed methods study that examined engineering students’ acquisition of technical communication skills over time. In particular, this exploratory study aimed to identify persistent errors, lingering misconceptions, and challenges engineering students faced when they attempted to apply their knowledge and skills in new contexts. The 12 participants were drawn from engineering courses in which students were required to compose technical memoranda in response to requests for information from supervisors or clients. This integrated approach addresses content and communication in the same course. The study included a longitudinal analysis of four technical memoranda written across two …

Motivating Students For Learning Using Scaffolding And A Variety Of Assignments, Nadiye O. Erdil

Engineering and Applied Science Education Faculty Publications

This paper discusses the impacts of various course assignments and activities that were used to increase student motivation and learning. The courses selected for the study are Quality Analysis and Design of Experiments courses, which are offered as required courses in the industrial engineering graduate program at the University of New Haven. The assignments and activities include term project, term paper, homework, in-class exercises, quizzes, exams, library training and factory visit. In an earlier pilot study in the Quality Analysis course, scaffolding -an instructional strategy that enables students to build on prior experience and knowledge as they work towards mastering …

Agent-Based Modeling And Simulation Approaches In Stem Education Research, Shanna R. Simpson-Singleton, Xiangdong Che

Journal of International Technology and Information Management

The development of best practices that deliver quality STEM education to all students, while minimizing achievement gaps, have been solicited by several national agencies. ABMS is a feasible approach to provide insight into global behavior based upon the interactions amongst agents and environments. In this review, we systematically surveyed several modeling and simulation approaches and discussed their applications to the evaluation of relevant theories in STEM education. It was found that ABMS is optimal to simulate STEM education hypotheses, as ABMS will sensibly present emergent theories and causation in STEM education phenomena if the model is properly validated and calibrated.

Adaptive Learning Pedagogy In Udl And Multi-Modal Training, Ziho Kang, Mattlyn R. Dragoo, Randa L. Shehab, Han Yuan, Lei Ding, Stephen G. West

National Training Aircraft Symposium (NTAS)

Currently, most learning methods are based on classroom teaching through unidirectional communication using boards or slides. However, the Universal Design for Learning (UDL) asserts that the students can increase their performance if the instructors can provide the students with diversified information representation, expression, and engagement means. Although UDL minimizes the mismatch between the teaching and learning styles, we lack the detailed methods to implement the UDL and its associated multi-modal training methods in the context of air traffic control candidates and/or technical operators. We propose an approach that adapts the Index of Learning Styles (ILS) based on four categories: perception, …

The Value Of A Collegiate Far Part 141 Jeopardy-Crew Resource Management (Crm)-Simulation Event, Samuel M. Vance

Journal of Aviation/Aerospace Education & Research

This article explores the viability of using a FAR Part 141 collegiate crew resource management (CRM) flight simulator scenario event as a jeopardy event (a graded, syllabus item) in an upper-level professional pilot curriculum course. Ultimately, the objective is to suggest this approach as a value-added curriculum consideration for other collegiate professional pilot programs. The selection of four CRM criteria to be examined was made by the course professor. Using the four principles, the students assembled the grading rubric for their event. The simulator scenario placed students in airspace, geography and weather dissimilar to that in which they were training …

An Outcome-Based Competency Model For Systems Engineering Trainees, Vanessa J. Pietrzyk

Engineering Management & Systems Engineering Theses & Dissertations

Dominant theories relating to outcome-based learning and workforce competency were synthesized into a singular outcome-based competency model to evaluate systems engineering training. A baseline model was developed using leading theories from the academic literature pertaining to competencies for systems engineers across three categories: cognitive, skill-based, and behavioral. The model was further refined via qualitative and quantitative analysis of formal interviews of subject matter experts in the field of systems engineering workforce management. The refined model classifies 28 critical competencies for systems engineers into three tiers of workforce functionality: foundational, specialized, and leadership. The resultant theoretical model is both grounded in …

Attending To Scientific Practices Within Undergraduate Research Experiences, Gina Quan, Chandra Turpen, Andrew Elby

Faculty Publications

Ford (2015) argues for viewing “scientific practice” not as a list of particular skills, but rather, more holistically as “sets of regularities of behaviors and social interactions” among scientists. This conceptualization of scientific practices foregrounds how they meaningfully connect to one another and are purposefully employed in order to explain nature. We apply this framework in the context of undergraduate research experiences (UREs) to understand the early forms of student engagement in scientific practices, and how these specific forms of engagement may be consequential for students’ future participation. Using video from interviews with students and research mentors, we argue that …

Attending To Scientific#12; Practices Within Undergraduate Research Experiences, Gina M. Quan, Chandra Anne Turpen, Andrew R. Elby

Gina Quan

Development Research And Implications For Cte, Jeff M. Shannon

Morehead State Theses and Dissertations

A capstone submitted in partial fulfillment of the requirements for the degree of Doctor of Education in the College of Education at Morehead State University By Jeff M. Shannon on March 9, 2016.

An Assessment Of The Performances Of Several Univariate Tests Of Normality, James Olusegun Adefisoye

FIU Electronic Theses and Dissertations

The importance of checking the normality assumption in most statistical procedures especially parametric tests cannot be over emphasized as the validity of the inferences drawn from such procedures usually depend on the validity of this assumption. Numerous methods have been proposed by different authors over the years, some popular and frequently used, others, not so much. This study addresses the performance of eighteen of the available tests for different sample sizes, significance levels, and for a number of symmetric and asymmetric distributions by conducting a Monte-Carlo simulation. The results showed that considerable power is not achieved for symmetric distributions when …

The Cadet Training Program Versus The Student Certification Program: A Study Of It- Support Training Programs At Western Kentucky University, Michael Courtney Moore

Masters Theses & Specialist Projects

Technology is a critical component of modern-day success. Advancements in technology have improved communication between individuals and companies. Technological advancements have allowed students to earn college degrees online. People who habitually use technology expect a high level of performance and support. As new technologies are implemented, such as complex web services or new operating systems, the dependence for information technology (IT) support grows in demand. Even learning curves can be cumbersome without proper assistance from IT professionals. Companies and institutions must accommodate user needs by implementing fast, efficient, and friendly support. In order to offer optimal customer support, representatives must …

Evaluating Food Safety Systems Development And Implementation By Quantifying Haccp Training Durability, Marienne A. Anandappa

Theses and Dissertations--Animal and Food Sciences

HACCP-based food safety programs have been widely acclaimed, accepted and implemented as an effective means of managing food safety risks. While HACCP training is a cornerstone of managing HACCP programs, there is little information about the effectiveness of HACCP training and the durability of HACCP knowledge. Findings reveal a link between involvement level in HACCP activities and the accuracy of HACCP knowledge over time. Opportunities for peer training in HACCP, irrespective of overall experience in the food industry provide favorable circumstances for maintaining accuracy of HACCP knowledge. The optimal window for engaging employees in HACCP is directly following the completion …

Perceptions And Rankings Of Technology Management Competencies, Mark Doggett, Pam Mcgee, Sophia Scott

Mark Doggett

2012 Association of Technology, Management, and Applied Engineering (ATMAE) Conference Proceedings In 2010, the ATMAE Management Division set out to define an applicable technology management body of knowledge using a collection of core competencies. The research incorporated existing models, industry opinions, and educator experts. ATMAE members at both the 2010 and 2011 conferences reviewed initial versions of the competency model. In addition, the model was benchmarked against existing literature and research. The researchers found consistency within the initial versions of the competency model. Interested scholars may find the initial model and supporting rationale in the 2011 ATMAE conference proceedings. This …

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice., Francis X. Palisi

Purdue Polytechnic Masters Theses

This research study illustrates the growing importance of sustainable purchasing practices and answers two important questions: what is the current awareness of U.S. organizations on sustainable purchasing practices with regards to evaluating, selecting, and retaining suppliers and to what extent are these practices being implemented? The research conducted is based upon an in-depth literature review of green purchasing and sustainability initiatives. With an ever increasing global economy with no intention of slowing down it is ever important to look towards sustainability practices and the biggest impact organizations can make is in the purchasing department. The researcher begins by explaining their …

Creating A State-Wide Transfer Program For Engineering Technology And Technology Management Students, Greg K. Arbuckle, Mark Doggett

Mark Doggett

The primary purpose of the Western Kentucky Pipeline for 2+2+2 Engineering Technology and Technology Management (ET/TM) students program is to significantly increase degree production and workforce preparation in central and western Kentucky through the construction of a long-term sustainable, reproducible model bridging program of cooperation between Western Kentucky University (WKU), Murray State University (MSU) and the Kentucky Community and Technical College System (KCTCS). The program will significantly increase industrial and technology education opportunities, technology enrollment and two and four-year degree completion. Additionally, this project supports the Kentucky Council on Postsecondary Education’s (CPE) goal to double the overall number of undergraduate …

Creating A State-Wide Transfer Program For Engineering Technology And Technology Management Studies, Gregory Arbuckle, Mark Doggett

SEAS Faculty Publications

The primary purpose of the Western Kentucky Pipeline for 2+2+2 Engineering Technology and Technology Management (ET/TM) students program is to significantly increase degree production and workforce preparation in central and western Kentucky through the construction of a long-term sustainable, reproducible model bridging program of cooperation between Western Kentucky University (WKU), Murray State University (MSU) and the Kentucky Community and Technical College System (KCTCS). The program will significantly increase industrial and technology education opportunities, technology enrollment and two and four-year degree completion. Additionally, this project supports the Kentucky Council on Postsecondary Education’s (CPE) goal to double the overall number of undergraduate …

Graduate Faculty Workloads: Recognizing Scholarship And Student Engagement At The Comprehensive Institution, Mark Doggett

Mark Doggett

No abstract provided.

Toward A Technology Management Core: Defining What The Technology Manager Needs To Know, Mark Doggett, Pam Mcgee, Sophia Scott

Mark Doggett

No abstract provided.

Rfid Classroom Management System, Andrew W. Wright

Master's Theses

Professors who manage large classes are unrealistically expected to grade each student fairly and accurately. Even with all of the technological advancements that have occurred in the past thirty years, very little progress has been made in classroom management, and as a result, professors are not equipped with enough tools to successfully manage large class sizes. Because radio frequency identification (RFID) technology is making its way into student issued identification cards, there is an opportunity to use it as a tool to aid professors in the classroom. The focus of this paper is to discover the most effective system that …

Evaluation System Design And Academic Performance Analysis Using Clustering And Simulation, Volkan Cakir

Engineering Management & Systems Engineering Theses & Dissertations

The starting point of this study was to understand the possible causes of evaluation system change in a military academic environment. With that motivation the objectives of this study were defined as examining student profiles in a military academy, establishing the nature of academic performance, comparing student groups that were identified by course scores, analyzing student performance changes over time and developing a manageable evaluation system and curriculum by comparing different scenarios.

An analysis was performed on the literature on academic performance prediction, cluster analysis methodologies and their development, and specifically summarized cluster analytic academic performance studies where these two …

Toward A Technology Management Core: Defining What The Technology Manager Needs To Know, Mark Doggett, Pam Mcgee, Sophia Scott

SEAS Faculty Publications

With the increasing demands on organizations to do “more with less,” and produce acceptable market results, productivity and performance standards continually raise the expectations on competitive success. To meet these expectations, organizations should create learning opportunities that combine the application of technical management skills along with the softer skills involved in people management. Technical managers with little training or past experience with nontechnical skills often perform poorly in technical management positions (Kroecker, 2007). Because this generation lives in a highly technical environment, managers need to be proficient in dealing with knowledge workers and systems; therefore, there is a growing emphasis …

Quality Assurance In Engineering Education: A Systems Perspective, Mildred Genevieve Louidor

Masters Theses

Engineering education reform has been a topic of discussion for the last twenty years. The concern has only intensified in recent years as stakeholders strive to improve quality in engineering education. Today, stakeholders are recognizing that one of the keys to successful engineering education reform is in taking a systems view of higher education. Academic departments within the higher education system are organized around academic disciplines for the purpose of creating, transferring, and applying knowledge in three principal areas: teaching, research and service. This study addresses the need for quality improvement in the engineering higher education system by first completing …

Can We Make Accounting Relevant Again? Non-Traditional Accounting Systems Can Drive Productivity And Future Prosperity, Mark Doggett

Mark Doggett

No abstract provided.

2007 Survey Of Summer Sessions Students At The University Of Nebraska-Lincoln, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

During Summer 2007, UNL Summer Sessions (FlexEd) surveyed summer students to learn about their experience in taking a summer course(s). The survey results will offer confirmation of what we are doing well and will provide guidance on areas of improvement and better strategies for marketing UNL summer opportunities. A total of 227 students completed the survey. Fifteen summer classes were selected to complete a paper-based or electronic version of the survey. The classes were from three different summer sessions and used different delivery mechanisms (on-campus, studio, distance education).

Pre/Post Assessment Of Abilities, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

One approach to assess if students are learning in a course is to conduct a pre-test, post-test assessment of the course material. By comparing the two results, one can make an assessment of the knowledge learned in the course. For certain types of courses, it can be a challenge in defining an assessment instrument that measure student knowledge. This example is one I have developed for my IMSE 440/840 (Discrete Event Computer Simulation) course. Students are asked rate their ability for key course objectives defined on the course syllabus. I administer it on the first day of the course and …

Class Exercise For Assessing Abilities And Providing A Structure For A Course, Paul Savory

Industrial and Management Systems Engineering: Instructional Materials

I developed this class exercise to assess students abilities and to highlight the range of questions/issues that they will learn in my IMSE 440/840 (Discrete Event Computer Simulation) course. I draw a picture of the case scenario for students and explain the system’s operation to them. I then ask that they complete the questions regarding the system and/or how they would analyze it. Following class, I develop a summary of the range of student answers. At the next class session, I share the range of answers and share what my answers would be and how these questions/topics relate to what …

Writing Reflective Case Studies For The Engineering Management Journal (Emj), Timothy Kotnour, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

This paper's intent is to help authors write reflective case studies for the Engineering Management Journal (EMJ). We offer a process to convert an applied research project with an organization to an EMJ manuscript. Writing a reflective case study is a process of abstracting experiences into approaches, processes, tools, challenges, and "lessons" for a broad audience of engineering managers. This paper serves as a guide for authors to write reflective case studies.

Manufacturing Curriculum Issues Of Two-Year Mechanical Engineering Technology Program In Taiwan, R.O.C., Chuan-Chun Wu

Dissertations and Theses @ UNI

The purpose of this study was to evaluate current practices and possible changes in the mechanical engineering technology manufacturing curriculum in Taiwan's two-year junior technical colleges. The study was based on survey responses from three populations: (a) graduates of mechanical engineering (manufacturing division) programs in two-year junior technical colleges, (b) their manufacturing supervisors, and (c) their company chief executive officers (CEOs). The survey was designed to develop responses for following:

1. Determine the degree of importance of courses in the current Taiwanese two-year curriculum in manufacturing, in the opinion of the three groups surveyed.

2. Determine what the future curriculum …