Nuclear Engineering Commons^™

Viability Of Energy And Fuel Sources For Interstellar Travel; Design And Feasibility Of The Construction Of Manned Interstellar Space Shuttles, Lukas Mittelman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The importance of proving the viability of interstellar transport and addressing its potential hazards and pitfalls is immense. If we do not look toward the future and examine what could be waiting for us, we are doing our children, our children’s children, and so on, a disservice. Here we must attempt to lay the groundwork for our future scientists, engineers, and adventurers. Asking and answering questions like, which propulsion and energy systems must we incorporate to send us through the cosmos? Will we utilize technologies known today, such as fossil fuel rockets, fission or fusion rockets, and antimatter drives (pion …

Fast Neutron Assay Of Elemental Content Of Bulk Samples, Calder Emerson Lane

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to analyze the capabilities of fast neutrons in the detection and analysis of various isotopes in bulk samples. The deuterium-tritium (DT) fusion reaction generates highly penetrating, high-energy (14.1-MeV) neutrons which induce nuclear reactions in irradiated targets. Neutrons and gamma rays are generated in these reactions. Emitted gamma rays are characteristic of the emitter; the gamma spectrum enables stoichiometric identification of the assayed samples. Neutron backscattering can also be used for identification of the elemental composition of the sample.

This work had three objectives. The first objective was to develop a computational technique to model …

Fast Neutron Detection In Nuclear Material Photofission Assay Using A 15 Mev Linear Electron Accelerator, Matthew Steven Hodges

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to use a 15 MeV (K15 model by Varian) linear electron accelerator (linac) for the photon assay of special nuclear materials (SNM). First, the properties of the photon radiation probe were determined. The stochastic radiation transport code, MCNP5, was used to develop computational models for the linac. The spectral distribution of photons as well as dose rate contour maps of the UNLV accelerator facility were computed for several linac operating configurations. These computational models were validated through comparison with experimental measurements of dose rates.

The linac model was used to simulate the photon interrogation …

Neutron-Gamma Discrimination In Elpasolite Scintillator Detector, Brittany Morgan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Existing nuclear stockpiles and weapons-making capabilities imperil the global community. Current nonproliferation efforts involve the research and development of newer, more efficient detection systems that can be deployed for the interdiction and monitoring of special nuclear materials (SNM). Spontaneous and induced fission events in SNM produce neutrons and gamma rays, which can be detected and analyzed, in particular, using scintillator detectors. Various electronic data acquisition systems and data analysis methods have been employed to record and characterize neutron and photon signatures. The goal of this thesis is to develop a new method of discrimination between neutrons and photons in the …

Mcnp6 Computational-Based Sensitivity Propagation Analysis Of Continuous Neutron Cross-Sections Using The Godiva (Hmf-001) And The Godiver (Hmf-004) Benchmark Criticality Study Cases, Lawrence James Lakeotes

UNLV Theses, Dissertations, Professional Papers, and Capstones

There has been a reduction in funding for theoretical and applied research for improving the nation's database of continuous neutron cross-sections at BNL-NNDC. From 1940 through the late 1980s, research and applied development produced volumes of reliable neutron continuous cross-sections for many isotopes. Currently, the cross-section work has been mainly computational. The focus of this research is mainly centered on the requirements for improving thermal cross-sections to support reactor operations and fuel storage. The research efforts will also helpfully aid in the fast fission spectrum in order to support fast reactor designs for improving safety analysis and feedback coefficients.

This …

Time Correlated Measurements Using Plastic Scintillators With Neutron-Photon Pulse Shape Discrimination, Norman Edison Richardson

UNLV Theses, Dissertations, Professional Papers, and Capstones

Since the beginning of the nuclear age, there has been a strong demand for the development of efficient technologies for the detection of ionizing radiation. According to the United States' Department of Energy, the accurate assessment of fissile materials is essential in achieving the nonproliferation goals of enhancing safety and security of nuclear fuel cycle and nuclear energy facilities [1]. Nuclear materials can be characterized by the measurement of prompt and delayed neutrons and gamma rays emitted in spontaneous or induced fission reactions [2] and neutrons emitted in fission reactions are the distinctive signatures of nuclear materials. Today, the most …

Assessing Different Zeolitic Adsorbents For Their Potential Use In Kr And Xe Separation, Breetha Alagappan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Separation of Kr from Xe is an important problem in spent nuclear fuel fission gas management. The energy intensive and expensive cryogenic distillation method is currently used to separate these gases. In this thesis, we have carried out the research into appropriate sorbents for the separation of Kr and Xe using pressure swing adsorption. We have examined zeolites using gas adsorption studies as they have the potential to be more cost effective than other sorbents. Zeolites are microporous aluminosilicates and have ordered pore structures. The pores in zeolites have extra-framework cations are substantially free to move. The mobility of cations …

Criticality And Characteristic Neutronic Analysis Of A Transient-State Shockwave In A Pulsed Spherical Gaseous Uranium-Hexafluoride Reactor, Jeremiah Boles

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this study is to analyze the theoretical criticality of a spherical uranium-hexafluoride reactor with a transient, pulsed shockwave emanating from the center of the sphere in an outward-radial direction. This novel nuclear reactor design, based upon pulsed fission in a spherical enclosure is proposed for possible use in direct energy conversion, where the energy from fission products is captured through the use of electrostatic fields or through induction. An analysis of the dynamic behavior of the shockwave in this reactor is the subject of this thesis. As a shockwave travels through a fluid medium, the characteristics of …

Novel Production Techniques Of Radioisotopes Using Electron Accelerators, Daniel Robert Lowe

UNLV Theses, Dissertations, Professional Papers, and Capstones

Non-traditional radioisotope production techniques using a compact, high power linear electron accelerator have been demonstrated and characterized for the production of 18F, 47Sc, 147Pm, and 99mTc from a variety of target candidates. These isotopes are used extensively in the medical field as diagnostic and therapy radioisotopes, as well as the space industry as RTG's. Primary focus was placed on 99mTc as it constitutes approximately 80% of all diagnostic procedures in the medical community that use radioactive tracers. It was also the prime focus due to recent events at the Chalk River nuclear reactor, which caused global shortages of this isotope …

Quantification Of Stochastic Uncertainty Propagation For Monte Carlo Depletion Methods In Reactor Analysis, Quentin Thomas Newell

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Monte Carlo method provides powerful geometric modeling capabilities for large problem domains in 3-D; therefore, the Monte Carlo method is becoming popular for 3-D fuel depletion analyses to compute quantities of interest in spent nuclear fuel including isotopic compositions. The Monte Carlo approach has not been fully embraced due to unresolved issues concerning the effect of Monte Carlo uncertainties on the predicted results.

Use of the Monte Carlo method to solve the neutron transport equation introduces stochastic uncertainty in the computed fluxes. These fluxes are used to collapse cross sections, estimate power distributions, and deplete the fuel within depletion …

Spectroscopic Methods Of Process Monitoring For Safeguards Of Used Nuclear Fuel Separations, Jamie Lee Warburton

UNLV Theses, Dissertations, Professional Papers, and Capstones

To support the demonstration of a more proliferation-resistant nuclear fuel processing plant, techniques and instrumentation to allow the real-time, online determination of special nuclear material concentrations in-process must be developed. An ideal materials accountability technique for proliferation resistance should provide nondestructive, realtime, on-line information of metal and ligand concentrations in separations streams without perturbing the process. UV-Visible spectroscopy can be adapted for this precise purpose in solvent extraction-based separations.

The primary goal of this project is to understand fundamental URanium EXtraction (UREX) and Plutonium-URanium EXtraction (PUREX) reprocessing chemistry and corresponding UV-Visible spectroscopy for application in process monitoring for safeguards. By …

Computational Study Of Passive Neutron Albedo Reactivity (Pnar) Measurement With Fission Chambers, Sandra De La Cruz

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Passive Neutron Albedo Reactivity technique (PNAR) was used to assay used nuclear fuel as a potential method for the measurement of fissionable material in fuel assemblies. A Monte Carlo transport code (MCNPX 2.6) was used to develop simulation models to evaluate the PNAR technique. The MCNPX simulated models consisted of two 17x17 Pressurized Water Reactor (PWR) used fuel assemblies; one with an initial 3 wt% uranium-235*, cooled for 20 years and second with an initial 4 wt% uranium-235*, cooled for 5 years. Each used fuel assembly was simulated at four different burn up rates of 15, 30, 45, and …

Impact Investigation Of Reactor Fuel Operating Parameters On Reactivity For Use In Burnup Credit Applications, Tanya N. Sloma

UNLV Theses, Dissertations, Professional Papers, and Capstones

When representing the behavior of commercial spent nuclear fuel (SNF), credit is sought for the reduced reactivity associated with the net depletion of fissile isotopes and the creation of neutron-absorbing isotopes, a process that begins when a commercial nuclear reactor is first operated at power. Burnup credit accounts for the reduced reactivity potential of a fuel assembly and varies with the fuel burnup, cooling time, and the initial enrichment of fissile material in the fuel. With regard to long-term SNF disposal and transportation, tremendous benefits, such as increased capacity, flexibility of design and system operations, and reduced overall costs, provide …

Evaluation Of Low-Temperature Fluoride Routes To Synthesize Actinide Nitrides And Oxide Solid Solutions, Gunanda Waduge Chinthaka Silva

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actinide mononitrides have been considered as a possible nuclear fuel for the Generation-IV nuclear reactor systems. In the process of evaluating these actinide mononitrides as nuclear fuel, it is important to study different chemical and physical characteristics of these compounds. Synthesis of the materials is thus important. Carbothermic reduction is one of the techniques that have been used to synthesize actinide mononitrides. In this method, a mixture of actinide oxide such as UO ₂ and excess carbon is heat treated at temperatures greater than 1700 °C under a nitrogen atmosphere. The technique is however not promising in synthesizing the actinide …

Zirconia-Magnesia Inert Matrix Fuel And Waste Form: Synthesis, Characterization And Chemical Performance In An Advanced Fuel Cycle, Kiel Steven Holliday

UNLV Theses, Dissertations, Professional Papers, and Capstones

There is a significant buildup in plutonium stockpiles throughout the world, because of spent nuclear fuel and the dismantling of weapons. The radiotoxicity of this material and proliferation risk has led to a desire for destroying excess plutonium. To do this effectively, it must be fissioned in a reactor as part of a uranium free fuel to eliminate the generation of more plutonium. This requires an inert matrix to volumetrically dilute the fissile plutonium. Zirconia-magnesia dual phase ceramic has been demonstrated to be a favorable material for this task. It is neutron transparent, zirconia is chemically robust, magnesia has good …

Development Of A Systems Engineering Model For Chemical Separation Process, Lijian Sun

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis is concerned with the efforts to develop a general-purpose systems engineering model software TRPSEMPro1 that can be used to improve productivity in the design process. Different features of TRPSEMPro will be presented in this thesis. First, Systems Engineering technology is presented, followed by the exposition of different numerical optimization technologies and DOE (Design of Experiments) study technologies. Second, the detailed software process, Object-Oriented Analysis and Design (OOA&D) for the TRPSEMPro is presented. All the design data models are expressed by using Unified Modeling Language (UML).

AMUSESimulator is another software package which has been designed and implemented in order …

Investigation Of The Corrosion Of Steel By Lead-Bismuth Eutectic (Lbe) Using Scanning Electron Microscopy And X-Ray Photoelectron Spectroscopy, Daniel Koury

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lead Bismuth Eutectic (LBE) has been proposed for use in programs for accelerator transmutation of waste. LBE is the leading candidate material as a spallation target and an option for the sub-critical blanket coolant. The corrosion of 316 and 316L stainless steels by LBE has been studied using UNLV's facilities for Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). We have compared exposed and unexposed samples and studied the differences. Some amount of surface contamination is present on the samples and has been removed by ionbeam etching. The unexposed samples reveal typical stainless steel characteristics: a chromium oxide passivation …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Xiaolong Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fundamental issues related to the selection of a metallic fuel casting furnace design are presented and discussed including heating mechanisms, casting issues, crucible design, and issues related to the mass transport of americium. The process of evaluating all of these different criteria is undertaken to select a concept that would have the greatest chance of success for casting americium in a metallic fuel rod. Based on this evaluation process, a concept for the casting of metallic fuel pins containing high vapor pressure materials is selected and discussed. The important physics of this concept include mass transport of americium from the …