Nanoscience and Nanotechnology Commons^™

Doping Plasmon-Enhanced Tio2 With Zirconia To Improve Solar Energy Harvesting In Dye-Sensitized Solar Cells, Anastasia Pasche

Electronic Thesis and Dissertation Repository

Solar energy is a promising solution towards meeting the world’s ever-growing energy demand. Dye-sensitized solar cells (DSSCs) are hybrid organic-inorganic solar cells with potential for commercial application, but are plagued by inefficiency due to their poor sunlight absorption. Silver nanoparticles have been shown to enhance the absorptive properties of DSSCs, but their plasmonic resonance causes local hot spots, resulting in cell deterioration. This thesis studies the mitigation of thermal energy loss of plasmon-enhanced DSSCs by the co-incorporation of zirconia, a well-known thermostabilizer, into the cell’s photoactive material. TiO2 was also synthesized using green bio-sourced solvents in supercritical CO2 to compare …

Nanostructured Carbon Materials For Active And Durable Electrocatalysts And Supports In Fuel Cells, Adam Riese

Electronic Thesis and Dissertation Repository

Meeting the energy demands of the future will require a breadth of technologies and materials for generating and converting electricity. Increasing activity and reducing costs of electrocatalysts for fuel cells is among the most important challenges for the technology. With advances in nanomaterials there has been increased interest in creating novel catalysts with both high activity and excellent long-term durability. This thesis aims to understand how modification of nanostructured carbons can be used to improve the activity and durability of catalysts and supports for the oxygen reduction reaction (ORR). Using an integrating approach to synthesis, characterization, and electrochemical testing, it …

Application Of 3d Printing Technology In Porous Anode Fabrication For Enhanced Power Output Of Microbial Fuel Cells, Bin Bian

Electronic Thesis and Dissertation Repository

Microbial fuel cells (MFCs) are widely researched for application in wastewater treatment. However, the current anodes used in MFCs often suffer from high fabrication cost and uncontrollable pore sizes. In this thesis, three-dimensional printing technique was utilized to fabricate anodes with different micro pore sizes for MFCs. Copper coating and carbonization were applied to the printed polymer anodes to increase the conductivity and specific surface area. Voltages of MFCs with various anodes were measured as well as other electrochemical tests such as linear sweep voltammetry and electrochemical impedance spectroscopy. 3D copper porous anode produced higher maximum voltages and power densities …

Thermal Kinetics Of Ion Irradiation Hardening In Selected Alloys For The Canadian Gen. Iv Nuclear Reactor Concept, Heygaan Rajakumar

Electronic Thesis and Dissertation Repository

Canada is designing supercritical water fission reactors (SCWR) to increase the thermal efficiency of nuclear power generation from ~34% to ~48%. The temperature and pressure of a supercritical water reactor core is very high compared to a CANDU reactor. This thesis examines irradiation hardening and thermal recovery of two candidate alloys, AISI 310 and Inconel 800H, for the Canadian SCWR.

Samples of both alloys are mechanically ground and polished, then irradiated using 8.0 MeV Fe ions. The use of ion irradiation safely and quickly simulates neutron damage. The change in the hardness of the samples is then studied during a …

Field Scale Application Of Nanoscale Zero Valent Iron: Mobility, Contaminant Degradation, And Impact On Microbial Communities, Chris M.D. Kocur

Electronic Thesis and Dissertation Repository

This thesis began by verifying that nanoscale zero valent iron (nZVI) synthesis methods could be scaled up and implemented at the field scale in a safe manner. This led to successful demonstration of nZVI injection and mobility under constant head gravity injection into a contaminated utility corridor in Sarnia, Ontario. Where field studies have fallen short in the past was linking the somewhat qualitative field geochemical parameters to other evidence of nZVI transport. Definitive nZVI detection was elusive in previous field studies due to the highly reactive nature of the particles caused by their high surface area. nZVI was detected …

Studies Of Periodic And Quasiperiodic Gold Nanohole Arrays And Their Applications, Zhaoliang Yang

Electronic Thesis and Dissertation Repository

Wavelength to refractive index sensitivity and resonance wavelength position are two very important performance characteristics for nanohole array based surface plasmon resonance sensors while these characteristics are mostly researched on periodic nanohole arrays, instead of quasiperiodic nanohole arrays. This thesis deduces theoretical equations about the wavelength to refractive index sensitivity and resonance wavelength position of quasiperiodic nanohole arrays. Theoretical analysis shows that wavelength to refractive index sensitivity is not associated with geometry pattern, hole size or pitch but with the wavelength. A novel surface plasmon resonance platform is built by transferring gold films patterned with quasiperiodic nanohole arrays to the …

Thermal Convection Of Non-Fourier Fluids, Rahim Mohammadhasani Khorasany

Electronic Thesis and Dissertation Repository

The natural convection of non-Fourier fluids of the dual-phase-lagging (DPL) type is examined. These fluids possess a relaxation time and a retardation time, reflecting the delay in the response of the heat flux and the temperature gradient with respect to one another. DPL fluids span a wide range of applications, including low-temperature liquids, fluids subjected to fast heat transfer processes, and nanofluids (NFs), for which both the relaxation and retardation times are expressed in terms of nanoparticle concentration and solution properties. Both stationary and oscillatory convection become equally probable as the relaxation time increases. A nonlinear spectral approach is also …

Size-Dependent Electroelastic Properties Of Piezoelectric Nanoplates, Zhengrong Zhang

Electronic Thesis and Dissertation Repository

With the development of nanotechnology, piezoelectric nanostructures have attracted a surge of interests in research communities for the potential applications as transistors, sensors, actuators, resonators and energy harvesters in nanoelectromechanical systems (NEMS) due to their high electromechanical coupling and unique features at the nano-scale. Piezoelectric nanomaterials have been characterized to possess size-dependent electromechanical coupling properties from both experimental and theoretical perspectives. Therefore it is of great importance to investigate the physical mechanisms of these distinct nano-scale structure features in order to fulfill the design and application of those piezoelectricity-based nanodevices.

Due to large surface to volume ratio and manifest strain …

Surfactant Assisted Dispersion Of Single-Walled Carbon Nanotubes In Polyvinylpyrrolidone Solutions, Tennison Yu

Electronic Thesis and Dissertation Repository

Obtaining stable aqueous dispersions is one of the main challenges hindering a widespread and effective use of single-walled carbon nanotubes (SWNT) in many applications. Although it has been recognized that their versatility makes them an extremely attractive material, the unique molecular structure that gives SWNTs their unmatched electronic, mechanical, and thermal properties is also responsible for strong van der Waals interactions. This, combined with extremely high aspect ratios and flexibility, causes SWNTs to adhere strongly into tightly bundled ropes. In these bundles, SWNTs are not as useful as their linearized unbundled equivalents. Thus, in order to take advantage of their …

Plasmonic Optical Sensors: Performance Analysis And Engineering Towards Biosensing, Peipei Jia

Electronic Thesis and Dissertation Repository

Surface plasmon resonance (SPR) sensing for quantitative analysis of chemical reactions and biological interactions has become one of the most promising applications of plasmonics. This thesis focuses on performance analysis for plasmonic sensors and implementation of plamonic optical sensors with novel nanofabrication techniques.

A universal performance analysis model is established for general two-dimensional plasmonic sensors. This model is based on the fundamental facts of surface plasmon theory. The sensitivity only depends on excitation light wavelength as well as dielectric properties of metal and dielectrics. The expression involves no structure-specified parameters, which validates this formula in broad cases of periodic, quasiperiodic …

Oriented Collagen And Applications Of Waveguide Evanescent Field Scattering (Wefs) Microscopy, Qamrun Nahar

Electronic Thesis and Dissertation Repository

In this thesis, Waveguide Evanescent Field Scattering (WEFS) microscopy is developed as a non-invasive, label-free live cell imaging technique. This new high-contrast imaging can be employed to study the first hundred nanometers from the surface as it utilizes the evanescent field of a waveguide as the illumination source. Previously, waveguide evanescent field fluorescence (WEFF) microscopy was developed as a fluorescence imaging technique comparable to the total internal reflection fluorescent (TIRF) microscopy. Both the WEFF and WEFS technique utilizes the same fundamental concepts except in WEFS microscopy imaging is accomplished without the application of any fluorescent labeling. In this work, bacterial …

Nanostructured Tin-Based Anodes For Lithium Ion Batteries With X-Ray Absorption Fine Structure Studies, Dongniu Wang

Electronic Thesis and Dissertation Repository

The practical applications of lithium ion batteries are highly dependent on the choice of electrodes, where boosting the materials innovations to design and achieve high capacity, excellent cycling performance, rate capability, low-cost and safe electrode materials provide the best solution. Based on this, tin-based anodes have gained great attention due to its high theoretical capacity, low cost and nontoxic nature to environment. Nevertheless, it undergoes significant volume variation(259%)during the operation of the battery, leading to pulverization and significant capacity fade. Thus, the practical application of tin-based anodes is still quite challenging. This thesis tackles issues related to tin-based anodes. It …

Development Of Nanostructured Limpo4 (M=Fe, Mn) As Cathodes For High Performance Lithium-Ion Batteries, Jinli Yang

Electronic Thesis and Dissertation Repository

Olivine LiFePO₄ has garnered the most interest because of its environmental benignity, high safety and theoretical capacity. However, the major limitation for LiFePO₄ is the intrinsically poor electronic conductivity and ionic conductivity. The sluggish kinetics for LiFePO₄ could be overcome by reducing the size, coating with conductive carbon, or doping with isovalent ions. The decrease of the size to nanoscale could shorten the diffusion time of Li ions in LiFePO₄ during intercalation/deintercalation process, but the nano-size active material usually accompanies with low tap density. Carbon coating and carbon addition could alleviate the poor electronic conductivity. However, …

Development Of Advanced Nanomaterials For Potential Lithium-Ion Battery Application, Jian Liu

Electronic Thesis and Dissertation Repository

Lithium-ion batteries (LIBs) are promising energy storage media under serious consideration for practical applications in electric vehicle (EVs) and hybrid electric vehicles (HEVs). However, to meet the requirements for EVs and HEVs, the performance of commercially available LIBs needs to be greatly improved in terms of the energy density, cycling life, rate capability, safety and cost. It is well known that the LIB performance is highly dependent on the choice of electrode materials. Therefore, it is greatly important to develop new electrode materials as replacements for graphite/LiCoO₂ used in commercial LIBs, in order to achieve high-performance LIBs desirable for …

Micro-Mechanical Assessment Of The Local Plastic Strain Invoked During A Splined Mandrel Flow Forming Operation, Meysam Haghshenas

Electronic Thesis and Dissertation Repository

Splined Mandrel Flow Forming (SMFF) is a metal spinning operation that involves the application of high multiaxial compressive stress states to invoke large plastic flow in the work piece. This allows for essentially one-step fabrication of complex internally-splined shapes. In this research project, the equivalent plastic strain, invoked throughout bcc (1020 steel) and fcc (5052 and 6061 aluminum alloys, pure copper, and 70/30 brass) samples, that were made by SMFF, was measured. The objective of the research were to measure the to obtain data on the effect of microstructure and mechanical parameters on the flow formability of ductile bcc and …

Ph Responsive Hydrogen Bonding Motif To Improve The Sensitivity Of Tumor Imaging, Fatimah Mohammed Algarni

Electronic Thesis and Dissertation Repository

Magnetic resonance imaging (MRI) is a powerful non-invasive medical diagnostic technique. Superparamagnetic iron oxide nanoparticles (SPIO) are effective contrast agents and provide high sensitivity contrast in MRI. Recent research has demonstrated that nanoparticle clusters exhibit significantly higher relaxivity than individual nanoparticles.

In order to increase the sensitivity of tumor imaging, supramolecular chemistry was introduced to this field and a novel conjugation method was developed using click chemistry between azide functionalized nanoparticles and pH-sensitive hydrogen bonding building blocks. This pH-sensitive hydrogen bonded complex was synthesized to cluster nanoparticles under mildly acidic biological conditions.

Due to the unexpected X-ray crystal structure of …

Development Of Novel Nano-Structured Materials With Low-Cost And High Stability For Pem Fuel Cell, Dongsheng Geng

Electronic Thesis and Dissertation Repository

Polymer electrolyte membrane fuel cells (PEMFCs) are non-polluting and efficient energy conversion devices that are expected to play a dominant role in energy solutions of the future. However, due to high cost and known degradation issue of Pt electrocatalyst, more durable, efficient, and inexpensive electrocatalysts are required before fuel cells can become commercially viable. This research is revolving around the development of electrocatalysts such as non-noble metal oxygen reduction reaction (ORR) catalyst, new alternative supports, and novel Pt nanostructures to address the above-mentioned challenges in PEMFCs.

Firstly, we report the synthesis of nitrogen doped carbon nanotubes (CN_x) and …

Vibration And Buckling Of Carbon Nanotube, Graphene, And Nanowire, Mohammad Hadi Mahdavi

Electronic Thesis and Dissertation Repository

Nanostructured materials with superior physical properties hold promise for the development of novel nanodevices. Full potential applications of such advanced materials require accurate characterization of their physical properties, which in turn necessitates the development of computer-based simulations along with novel experimental techniques. Since controlled experiments are difficult for nanoscale materials and atomic studies are computationally expensive, continuum mechanics-based simulations of nanomaterials and nanostructures have become the focal points of computational nano-science and materials modelling.

In this study, emphasis is given to predicting the mechanical behaviour of carbon nanotube (CNT), graphene, nanowire (NW), and nanowire encapsulated in carbon nanotube (NW@CNT), which …

Controlled Synthesis Of One Dimensional Nanostructured Materials And Their Applications As Catalyst Supports In Proton Exchange Membrane Fuel Cells, Mohammad Norouzi Banis

Electronic Thesis and Dissertation Repository

Nanomaterials have attracted significant interest in the past decade due to their unique structure and properties compared to their bulk counterparts. Nanomaterials-based solutions can address challenges in various technologies such as proton exchange membrane fuel cells (PEMFCs). PEMFC is an innovative energy conversion technology to directly convert chemical energy to electrical energy by using hydrogen as fuel. However, the current PEMFC system still faces significant technological roadblocks which have to be overcome before the system can become economically viable. A major impediment to the commercialization of PEMFC is the high cost of materials and manufacturing and stability, which is primarily …

Synthesis Of Silicide Nanomaterials Using Chemical Vapour Deposition Method, Hamid Norouzi Banis

Electronic Thesis and Dissertation Repository

Recent research has evidenced that nanotechnology may bring about a material revolution which sweeps through different scientific fields and leads to dramatic changes in the use of natural resources and our everyday life. Compared to their bulk counterparts, the nanomaterials may exhibit significantly improved physical properties by shrinking their size to nanometer scale. Metal silicide are distinguished by their features of combining advantages of both metals and semiconductors which promises superior performance various fields. Despite the progress in the synthesis methods of nanomaterials, it still remains a big challenge in controlled synthesis of 1D silicide nanostructures due to the difficulties …

Electrohydrodynamic Enhancement Of Heat Transfer And Mass Transport In Gaseous Media, Bulk Dielectric Liquids And Dielectric Thin Liquid Films, Seyed Reza Mahmoudi

Electronic Thesis and Dissertation Repository

Controlling transport phenomena in liquid and gaseous media through electrostatic forces has brought new important scientific and industrial applications. Although numerous EHD applications have been explored and extensively studied so far, the fast-growing technologies, mainly in the semiconductor industry, introduce new challenges and demands. These challenges require enhancement of heat transfer and mass transport in small scales (sometimes in molecular scales) to remove highly concentrated heat fluxes from reduced size devices. Electric field induced flows, or electrohydrodynamics (EHD), have shown promise in both macro and micro-scale devices.

Several existing problems in EHD heat transfer enhancements were investigated in this thesis. …

Vibration Of Carbon Nano-Structures, Sina Arghavan

Electronic Thesis and Dissertation Repository

In this thesis, first the fundamental characterizations of carbon nano-structures and basic atomistic models of the carbon nanotubes and graphitic sheets are reviewed extensively. Different simulation methods used in this field of study are discussed critically. Advantages and shortfalls of each method are reported in detail. A new structural approach based on the lattice atomic structure is selected as an accurate and efficient model for simulating carbon nano-structures. This method is used comprehensively in the present work along with continuous shell and plate theories to study the mechanical and vibrational characteristics of single-walled carbon nanotubes and single and multi-layered graphene …

Encapsulation And Controlled Release Of Rhu-Erythropoietin From Chitosan Biopolymer Nanoparticles, Cody Bulmer

Electronic Thesis and Dissertation Repository

The objective of this research project was to develop a drug delivery system for recombinant human erythropoietin (rHu-EPO), a glycoprotein hormone used in the treatment of renal anaemia and chemotherapy induced anaemia, using the biopolymer chitosan as the base component. Two types of chitosan nanoparticles were produced through ionotropic gelation using flush mixing with either tripolyphosphate (TPP) or carrageenan polymer. Chitosan-TPP and chitosan-carrageenan nanoparticles were generated under a variety of conditions to evaluate the effects of chitosan concentration, chitosan to anion mass ratio and solution pH on the nanoparticle characteristics of particle diameter, surface charge and particle size distribution. A …

Synthesis And Characterization Of One- And Two-Dimensional Novel Nanomaterials, Yu Zhong

Electronic Thesis and Dissertation Repository

Nanomaterials have attracted extensive interest due to their unique structure and excellent properties compared with their bulk counterparts. To obtain nanodevices with controlled properties, it is prerequisite to synthesize nanostructured materials with designed architecture.

In this work, low (one- and two-) dimensional nanomaterials with controlled structures have been synthesized and characterized based on chemical vapour deposition strategy. Our research targets cover one-dimensinoal hollow, solid, and solid @ hollow heterostructural nanomaterials including carbon nanotubes (CNTs), nitrogen-doped carbon nanotubes (NCNTs), SnO₂ nanowires, Mo doped-SnO₂ nanowires, Sn nanowires encapsulated in CNTs (Sn@CNTs), and two-dimensional Mo₂S₃ nanopetals. Dependence of …

Development Of Novel Nanomaterials For High-Performance And Low-Cost Fuel Cell Applications, Shuhui Sun

Electronic Thesis and Dissertation Repository

Proton exchange membrane fuel cells (PEMFCs) are promising energy converting technologies to generate electricity by mainly using hydrogen as a fuel, producing water as the only exhaust. However, short life-time and high cost of Pt catalyst are the main obstacles for the commercialization of PEMFCs. In the conventional carbon black supported platinum nanoparticle (NP) commercial catalyst, carbon supports are prone to oxidation and corrosion over time that results in Pt NPs migration, coalescence, even detaching from the catalyst support. In addition, Ostwald ripening of the Pt NPs could also occur due to their high surface energy and zero dimensional structural …

Electronic And Magnetic Excitations In Graphene And Magnetic Nano-Ribbons, Maher Zakaria Ahmed Selim

Electronic Thesis and Dissertation Repository

The discovery of graphene - a 2D material with superior physical properties - in 2004 was important for the intensive global research to find alternatives to three-dimensional (3D) semiconductor materials in industry. At the same time there have been exciting advances for 2D magnetic materials on the nanometer scale. The superior properties of graphene are mainly attributed to its crystal structure and its relatively short-range interactions. These properties show that natural and artificial 2D materials are promising for new applications.

In this thesis we have carried out a comprehensive investigation of the effects of the 2D lattice structures, the roles …

Exploring Bacterial Nanowires: From Properties To Functions And Implications, Kar Man Leung

Electronic Thesis and Dissertation Repository

The discovery of electrically conductive bacterial nanowires from a broad range of microbes provides completely new insights into microbial physiology. Shewanella oneidensis strain MR-1, a dissimilatory metal-reducing bacterium, produces extracellular bacterial nanowires up to tens of micrometers long, with a lateral dimension of ~10 nm. The Shewanella bacterial nanowires are efficient electrical conductors as revealed by scanning probe techniques such as CP-AFM and STM.

Direct electrical transport measurements along Shewanella nanowires reveal a measured nanowire resistivity on the order of 1 Ω∙cm. With electron transport rates up to 10⁹/s at 100 mV, bacterial nanowires can serve as a …

On Developing Novel Energy-Relates Nanostructured Materials By Atomic Layer Deposition, Xiangbo Meng

Electronic Thesis and Dissertation Repository

ABSTRACT

This thesis presents the fabrication of a series of novel nanostructured materials using atomic layer deposition (ALD). In contrast to traditional methods including chemical vapor deposition (CVD), physical vapor deposition (PVD), and solution-based processes, ALD benefits the synthesis processes of nanostructures with many unrivalled advantages such as atomic-scale control, low temperature, excellent uniformity and conformality. Depending on the employed precursors, substrates, and temperatures, the ALD processes exhibited different characteristics. In particular, ALD has capabilities in fine-tuning compositions and structural phases. In return, the synthesis and the resultant nanostructured materials show many novelties.

This thesis covers ALD processes of four …

Synthesis Of One-Dimensional And Two-Dimensional Carbon Based Nanomaterials, Mihnea Ioan Ionescu

Electronic Thesis and Dissertation Repository

Particular physical and chemical properties of carbon based nanomaterials (CBNs) have promised and exhibited great applications in manufacturing various nanodevices such as electron field emitters, sensors, one-dimensional conductors, supercapacitors, reinforcing fibres, hydrogen storage devices, and catalyst support for fuel cells electrodes. Despite these amazing technical progresses, many challenges still remain in the development of synthesis methods suitable for commercial applications and fabricating novel functional nanostructures with complex architecture.

In this Ph.D. thesis, one-dimensional (1D), two-dimensional (2D) carbon nanostructures, and 1D/2D hybrid of carbon nanostructures have been synthesized using various chemical vapour deposition (CVD) methods. The objective of this work is …

Atomic Force Microscopy For Better Probing Surface Properties At Nanoscale: Calibration, Design And Application, Yu Liu

Electronic Thesis and Dissertation Repository

To measure force by AFM with high resolution requires accurate calibration of optic – lever detection sensitivity and spring constant. On biological AFM force mode, the coupling effects of the liquid environment, spot size of laser beam and laser spot location on AFM cantilever backside, must be considered to correlate the static sensitivities from force curves in air and in liquid for calibration. An effective model has been developed first and experimentally elucidated to calibrate the static sensitivity in liquid. The proposed model eliminates inconvenience of static sensitivity calibration in liquid with possible contamination sources.

The static sensitivity based on …