Mechanical Engineering Commons^™

Mechanics Of Pure Bending And Eccentric Buckling In High-Strain Composite Structures, Jimesh D. Bhagatji, Oleksandr G. Kravchenko, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and …

Advancements And Challenges In Additively Manufactured Functionally Graded Materials: A Comprehensive Review, Suhas Alkunte, Ismail Fidan, Vivekanand Naikwadi, Shamil Gudavasov, Mohammad Alshaikh Ali, Mushfig Mahmudov, Seymur Hasanov, Muralimohan Cheepu

Engineering Technology Faculty Publications

This paper thoroughly examines the advancements and challenges in the field of additively manufactured Functionally Graded Materials (FGMs). It delves into conceptual approaches for FGM design, various manufacturing techniques, and the materials employed in their fabrication using additive manufacturing (AM) technologies. This paper explores the applications of FGMs in diverse fields, including structural engineering, automotive, biomedical engineering, soft robotics, electronics, 4D printing, and metamaterials. Critical issues and challenges associated with FGMs are meticulously analyzed, addressing concerns related to production and performance. Moreover, this paper forecasts future trends in FGM development, highlighting potential impacts on diverse industries. The concluding section summarizes …

Nonlinear Finite Element Model For Functionally Graded Porous Circular/Annular Micro-Plates Under Thermal And Mechanical Load, Enrique Nava Munoz

Masters Theses

A nonlinear finite element model for micro circular/annular plates under thermal and mechanical loading is developed using a third order shear deformation theory. In the kinematic assumptions, the change of plate thickness is allowed and no transverse shear strains are considered on the top and bottom surfaces. A power-law distribution is utilized to account for variations of two constituents through the thickness of the plate. Three different types of porosity distributions are considered. The strain gradient effect in micro scale structures is considered using the modified couple stress theory. The dynamic version of the principle of virtual displacements is used …

Boron Nitride Nanotubes: Force Field Parameterization, Epoxy Interactions, And Comparison With Carbon Nanotubes For High-Performance Composite Materials, Swapnil S. Bamane, Michael B. Jakubinek, Krishan Kanhaiya, Behnam Ashrafi, Hendrik Heinz, Gregory Odegard

Michigan Tech Publications

Boron nitride nanotubes (BNNTs) are a very promising reinforcement for future high-performance composites because of their excellent thermo-mechanical properties. To take full advantage of BNNTs in composite materials, it is necessary to have a comprehensive understanding of the wetting characteristics of various high-performance resins. Molecular dynamics (MD) simulations provide an accurate and efficient approach to establish the contact angle values of engineering polymers on reinforcement surfaces, which offers a measure for the interaction between the polymer and reinforcement. In this research, MD simulations and experiments are used to determine the wettability of various epoxy systems on BNNT surfaces. The reactive …

Non-Destructive Infrared Thermographic Curing Analysis Of Polymer Composites, Md Ashiqur Rahman, Javier Becerril, Dipannita Ghosh, Nazmul Islam, Ali Ashraf

Mechanical Engineering Faculty Publications and Presentations

Infrared (IR) thermography is a non-contact method of measuring temperature that analyzes the infrared radiation emitted by an object. Properties of polymer composites are heavily influenced by the filler material, filler size, and filler dispersion, and thus thermographic analysis can be a useful tool to determine the curing and filler dispersion. In this study, we investigated the curing mechanisms of polymer composites at the microscale by capturing real-time temperature using an IR Thermal Camera. Silicone polymers with fillers of Graphene, Graphite powder, Graphite flake, and Molybdenum disulfide (MoS₂) were subsequently poured into a customized 3D printed mold for …

Biomass Characterization And Insulation Optimization Studies, Hussein Awad Kurdi Saad

Doctoral Dissertations and Master's Theses

This study indicates how biomass materials can be effectively used as naturally sustainable alternatives to insulation materials. Barley grains and oak leaves, straw, and jute are collected, and crushed into powders/ chopped pieces. The physical characteristics are measured to characterize each powder. The biomass powder reinforced composites are manufactured in varying weight ratios. The density and thermal conductivity of composite materials are measured. The properties of composites compared to those of commercial insulation materials are found to be close to them. Furthermore, genetic algorithms (GA) can be used to achieve multi-objective optimization entailing maximizing insulation (minimizing heat transfer) and simultaneously …

Analysis Guidelines And Functionalities Of The Catia Native Fea Solver For Composite Materials, Mohamed Edrisy

Electronic Theses and Dissertations

The emergence of commercial FEA solvers was a significant breakthrough that boosted the accuracy and complexity of engineering design. While composite materials are special materials, their mechanical properties can be custom made by considering the needs and requirements of the design problem. Given the rapidly expanding global consumption of composite materials, access to FEA solvers capable of assigning these materials is an absolute requirement.The CATIA software is a platform for designing, analyzing, and manufacturing of parts. However, there is no meaningful documentation in the public domain exploring the finite element functionalities of CATIA software for composite materials. Isotropic materials are …

Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results, Emily Zeitunian

Dissertations, Master's Theses and Master's Reports

Composite materials require a multi-scale approach to fully understand its behavior. At the micro level, material behavior analysis is conducted most often using numerical or analytical approaches. These models, however, require validation from experimental data to ensure material predictions are accurate. This study compares a semi-analytical micromechanical analysis tool, MAC/GMC, to experimental results of in-situ microscale transverse compression testing conducted at AFRL facilities. Effective properties, stress-strain curves, stress and strain fields, and damage predictions are compared with experimental outputs. Both generalized method of cells (GMC) and high-fidelity generalized method of cells (HFGMC) theories implemented within MAC/GMC show results that agree …

Low Weight Design Of A Pressure-Fed System For A Small Payload Launch Vehicle, Lucero Buendia

Open Access Theses & Dissertations

Carbon fiber reinforced polymer (CFRP) composites have become of great interests to aerospace industries because of their low-cost, lightweight and their tailorable mechanical properties. In aerospace structures, for example, heavy metals have been used in cryogenic fuel and oxidizer tanks for over 50 years. However, weight savings can be substantial if materials such as composites are used instead. From Delta IV heavy-lift launch vehicle it is known that cryogenic composite tanks can save approximately up to 30% of weight in fuel and oxidizer tanks. Although there is a wealth of studies in the mechanical behavior of composites at room temperature, …

Prototyping A Conductive Polymer Steering Pad For Rail Freight Service, Anthony A. Villarreal, Constantine Tarawneh, Miguel Ontiveros, James Aranda, Robert Jones

Mechanical Engineering Faculty Publications and Presentations

The AdapterPlus™ steering pad is a polymer component on a railcar that helps to reduce stresses on the axle as a railcar rounds a curve. One railway application requires a minimum of 240 mA to be passed through the steering pad to the rail, which activates air valves that control automated cargo gates. Currently, two copper studs are inserted into the pad to provide a conductive path. However, after continuous cyclic loading caused by normal service operation, the copper studs deform, wear, and eventually lose contact between the two surfaces rendering the pad nonconductive. One proposed solution to this problem …

Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller

Graduate Theses and Dissertations

Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).

The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and a …

Interlaminar Damage Detection In Composite Materials, Hariharan Rangarajan

Williams Honors College, Honors Research Projects

Using ceramic matrix composites (CMCs) for high-temperature applications in jet engines increases durability and reduces weight and cooling requirements resulting in improved efficiency and fuel savings. Understanding, detecting, and monitoring different types of damage is essential to achieve optimal performance of CMC components. The Direct Current Potential Drop (DCPD) method is a non-destructive technique of estimating damage in composite materials.

DCPD technique works by measuring nodal potential differences when current is flown through the material. Direct current spreading in different woven and laminate composites is modeled to follow a ladder resistor network in which the nodal voltages decrease exponentially as …

Experimental Investigation Of Impact Localization In Composite Plate Using Newly Developed Imaging Method, Mohammad Faisal Haider, Asaad Migot, Md Yeasin Bhuiyan, Victor Giurgiutiu

Faculty Publications

This paper focuses on impact localization of composite structures, which possess more complexity in the guided wave propagation due to the anisotropic behavior of composite materials. In this work, a composite plate was manufactured by using a compression molding process with proper pressure and temperature cycle. Eight layers of woven composite prepreg were used to manufacture the composite plate. A structural health monitoring (SHM) technique was implemented with piezoelectric wafer active sensors (PWAS) to detect and localize the impact on the plate. There were two types of impact event that were considered in this paper (a) low energy impact event …

Simulating Dynamic Failure Of Polymer-Bonded Explosives Under Periodic Excitation, Rachel Kohler, Camilo Duarte Cordon, Marisol Koslowski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Accidental mishandling of explosive materials leads to thousands of injuries in the US every year. Understanding the mechanisms behind the detonation process is crucial to prevent such accidents. In polymer-bonded explosives (PBX), high-frequency mechanical excitation generates thermal energy and can lead to an increase in temperature and vapor pressure, and potentially the initiation of the detonation process. However, the mechanisms behind this energy release, such as the effects of dynamic fracture and friction, are not well understood. Experimental data is difficult to collect due to the different time scales of reactions and vibrations, so research is aided by running simulations …

Torsional Behaviour And Finite Element Analysis Of The Hybrid Laminated Composite Shafts: Comparison Of Vartm With Vacuum Bagging Manufacturing Method, Mehmet Emin Taşdelen, Mehmet Halidun Keleştemur, Ercan Şevkat

Faculty Publications - Mechanical Engineering

Braided sleeve composite shafts are produced and their torsional behavior is investigated. The braided sleeves are slid over an Al tube to create very strong and rigid tubular form shafts and they are in the form of 2/2 twill biaxial fiber fabric that has been woven into a continuous sleeve. Carbon and glass fibers braided sleeves are used for the fabrication of the composite shafts. VARTM (vacuum assisted resin transfer molding) and Vacuum Bagging are the two different types of manufacturing methods used in the study. Torsional behaviors of the shafts are investigated experimentally in terms of fabrication methods and …

Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga

Graduate Theses and Dissertations

The primary objective for this thesis is to contribute to the understanding of the oxide removal process for a corrosion sensing device. The goal for designing such a device is for monitoring corrosion on metallic structures. The sensing material (6.35mm x 1mm discs) of the device is composed of copper (I) oxide particles mixed in some polydimethylsiloxane (PDMS). The PDMS, “housing,” is meant for controlling the oxidation rate through the sensing material. A solvent was used to facilitate the etchant diffusion through the PDMS matrix. Toluene and acetic acid were the ideal solvent and etchant, respectively, for carrying out the …

Short Crack Growth Model In A Particulate Composite Using Nonlinear Elastic Fracture Mechanics, Ying Zhang, Tsuchin Chu, Ajay Mahajan

Dr. Ajay Mahajan

The fracture mechanics model for a long crack does not work very well with short-crack propagation when the initial crack length is less than 5.1 mm (0.2 inch). In order to investigate the short crack effect, a series of tests of particulate composite specimens with long and short cracks were performed and the results recorded on a video tape. This test data was analyzed to determine the fracture parameters. Two initial crack lengths, 2.5 mm (0.1 inches) and 7.6 mm (0.3 inches) were used in the crack propagation tests. Based on the principle of linear elastic fracture mechanics (LEFM), the …

Determination Of Optimal Experimental Parameters For Transient Thermography Imaging Using Finite-Element Models, Tsuchin Chu, Ajay Mahajan, A. Digrgorio, S. Russell

Dr. Ajay Mahajan

A study was conducted to determine the optimal inspection parameters such as range and time for finding defects in carbon/epoxy composite panels using IR thermography imaging. The present paper presents an innovative method for automatically selecting these parameters for evaluating composites based on a series of finite-element models. Such finite-element models of composite panels with flaws at different depth locations were constructed a priori and analysed to estimate the optimal operating parameters. The optimal inspection range and time were identified in the contour plots obtained from the appropriate finite-element analysis results. A graphite–epoxy composite panel with phantom defects at various …

Ultrasonics Transduction In Metallic And Composite Structures For Structural Health Monitoring Using Extensional And Shear Horizontal Piezoelectric Wafer Active Sensors, Ayman Kamal Abdelrahman

Theses and Dissertations

Structural health monitoring (SHM) is crucial for monitoring structures performance, detecting the initiation of flaws and damages, and predicting structural life span. The dissertation emphasizes on developing analytical and numerical models for ultrasonics transduction between piezoelectric wafer active sensors (PWAS), and metallic and composite structures.

The first objective of this research is studying the power and energy transduction between PWAS and structure for the aim of optimizing guided waves mode tuning and PWAS electromechanical (E/M) impedance for power-efficient SHM systems. Analytical models for power and energy were developed based on exact Lamb wave solution with application on multimodal Lamb wave …

Experimental And Finite Element Studies Of Shock Transmission, Eldon Jerry Goddard

UNLV Theses, Dissertations, Professional Papers, and Capstones

Composite materials are more widely used today in engineering products than ever before. Shock transmission in jointed composite sections needs to be investigated to understand the affect of composite materials on the dynamic response of the system. There exists limited published work on transient shock propagation through composite sections. The aim of this study is to analyze the transient behavior of joints in composite materials subjected to low impact loads and to develop a computational model that provides an improved physics based shock model. The jointed connection will be investigated experimentally and using Finite Element Analysis (FEA). The bolted joint …

Solution To Certain Problems In The Failure Of Composite Structures, Jonathan Goodsell

Open Access Dissertations

The present work contains the solution of two problems in composite structures. In the first, an approximate elasticity solution for prediction of the displacement, stress and strain fields within the m-layer, symmetric and balanced angle-ply composite laminate of finite-width subjected anticlastic bending deformation is developed. The solution is shown to recover classical laminated plate theory predictions at interior regions of the laminate and thereby illustrates the boundary layer character of this interlaminar phenomenon. The results exhibit the anticipated response in congruence with the solutions for uniform axial extension and uniform temperature change, where divergence of the interlaminar shearing stress is …

Impact Mechanics And High-Energy Absorbing Materials: Review, Pizhong Qiao, Mijia Yang, Florin Bobaru

Florin Bobaru Ph.D.

In this paper a review of impact mechanics and high-energy absorbing materials is presented. We review different theoretical models (rigid-body dynamics, elastic, shock, and plastic wave propagation, and nonclassical or nonlocal models. and computational methods (finite-element, finite-difference, and mesh-free methods. used in impact mechanics. Some recent developments in numerical simulation of impact (e.g., peridynamics) and new design concepts proposed as high energy absorbing materials (lattice and truss structures, hybrid sandwich composites, metal foams, magnetorheological fluids, porous shape memory alloys. are discussed. Recent studies on experimental evaluation and constitutive modeling of strain rate-dependent polymer matrix composites are also presented. Impact damage …

Mechanical And Electro-Chemical Investigation Of Carbon Farbric/Epoxy And Aluminum Foam Sandwich Composite Beams, Narin Sara Fatima

Wayne State University Theses

In this study the mechanical and electrochemical response of a sandwich composite comprising of carbon fiber fabric skin and aluminum foam core was evaluated. The three point flexural test was chosen to investigate the mechanical behavior in terms of finding the deformation and failure behavior. The flexural test exhibited an excellent bond between the skin and the core. The specimens mainly failed in three different modes - indentation, core shear and face yielding and showed three distinct regions: a linear rise in load with displacement region, a rapid load drop region and a plateau region followed by a densification region. …

3d Simulation Of Wind Turbine Rotors At Full Scale. Part Ii: Fluid–Structure Interaction Modeling With Composite Blades, Y. Bazilevs, Ming-Chen Hsu, J. Kiendel, R. Wuchner, K. U. Bletzigner

Ming-Chen Hsu

In this two-part paper, we present a collection of numerical methods combined into a single framework, which has the potential for a successful application to wind turbine rotor modeling and simulation. In Part 1 of this paper we focus on: 1. The basics of geometry modeling and analysis-suitable geometry construction for wind turbine rotors; 2. The fluid mechanics formulation and its suitability and accuracy for rotating turbulent flows; 3. The coupling of air flow and a rotating rigid body. In Part 2, we focus on the structural discretization for wind turbine blades and the details of the fluid–structure interaction computational …

Understanding The Effects Of Addition Of Copper Nanoparticles To Sn-3.5 Ag Solder

A.S. Md Abdul Haseeb

Purpose - The purpose of this paper is to focus on the fabrication of SAC nanocomposites solder and discuss the effects of nanoCu addition on the structure and properties of resulted nanocomposite solder. Design/methodology/ approach - Ball milling is a nonequilibrium processing technique for producing composite metal particles with submicron homogeneity by the repeated cold welding and fracture of powder particles. This method is believed to offer good processablity, precise control over the solder composition, and produce more homogeneous mixture. Findings - It is found that the melting temperature, the wetting behaviour, and hardness are improved when the Cu nanoparticles …

High Strength And Light-Weight Materials Inspired By The Exoskeleton Of Arthropods, Anette M. Karlsson

Mechanical Engineering Faculty Publications

This work investigates the multiscaled structure and the constitutive behavior of the exoskeleton of arthropods (Japanese beetle) along with the response of biomimicked structures. Image analysis (SEM and TEM) revealed three load-bearing regions comprised of chitin-protein fiber layers orientated parallel to the cuticle surface. The chitin fibers in the exocuticle and mesocuticle are organized in a helicoidal structure (layers stacked with a small rotational angle relative to their adjacent layers). The endocuticle has a distinct pseudo-orthogonal pattern, characterized by a thin transitional helicoidal region inserted between two orthogonal layers. Idealized mechanics based models showed that the pseudo-orthogonal structure redistributes the …

Numerical Investigation Of Mechanical Durability In Polymer Electrolyte Membrane Fuel Cells, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson, Simon Cleghorn, William B. Johnson

Mechanical Engineering Faculty Publications

The relationship between the mechanical behavior and water transport in the membrane electrode assembly (MEA) is numerically investigated. Swelling plays a key role in the mechanical response of the MEA during fuel cell operation because swelling can be directly linked to the development of stresses. Thus, in the model introduced here, the stresses and the water distribution are coupled. Two membranes are studied: unreinforced perfluorosulfonic acid (PFSA) and an experimental reinforced composite membrane. The results suggest that open-circuit voltage operations lead to a uniform distribution of stresses and plastic deformation, whereas under current-load operation, the stresses and the plastic deformation …

Variational Asymptotic Micromechanics Modeling Of Composite Materials, Tian Tang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The issue of accurately determining the effective properties of composite materials has received the attention of numerous researchers in the last few decades and continues to be in the forefront of material research. Micromechanics models have been proven to be very useful tools for design and analysis of composite materials. In the present work, a versatile micromechanics modeling framework, namely, the Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH), has been invented and various micromechancis models have been constructed in light of this novel framework. Considering the periodicity as a small parameter, we can …

Impact Mechanics And High-Energy Absorbing Materials: Review, Pizhong Qiao, Mijia Yang, Florin Bobaru

Department of Engineering Mechanics: Faculty Publications

In this paper a review of impact mechanics and high-energy absorbing materials is presented. We review different theoretical models (rigid-body dynamics, elastic, shock, and plastic wave propagation, and nonclassical or nonlocal models. and computational methods (finite-element, finite-difference, and mesh-free methods. used in impact mechanics. Some recent developments in numerical simulation of impact (e.g., peridynamics) and new design concepts proposed as high energy absorbing materials (lattice and truss structures, hybrid sandwich composites, metal foams, magnetorheological fluids, porous shape memory alloys. are discussed. Recent studies on experimental evaluation and constitutive modeling of strain rate-dependent polymer matrix composites are also presented. Impact damage …

Acoustic Emission Detection And Prediction Of Fatigue Crack Propagation In Composite Patch Repairs Using Neural Networks, Navdeep Singh, Navrag Singh, Anthony Chukwujekwu Okafor

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An aircraft is subjected to severe structural and aerodynamic loads during its service life. These loads can cause damage or weakening of the structure especially for aging military and civilian aircraft, thereby affecting its load carrying capabilities. Hence composite patch repairs are increasingly used to repair damaged aircraft metallic structures to restore its structural efficiency. This paper presents the results of Acoustic Emission (AE) monitoring of crack propagation in 2024-T3 Clad aluminum panels repaired with adhesively bonded octagonal, single sided boron/epoxy composite patch under tension-tension fatigue loading. Crack propagation gages were used to monitor crack initiation. The identified AE sensor …