Mechanical Engineering Commons^™

Thermophotovoltaic Devices: Combustion Chamber Optimization And Modelling To Maximize Fuel Efficiency, Arnold Chris Toppo, Ernesto Marinero, Zhaxylyk Kudyshev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, 110 billion cubic meters of natural gas (primarily methane), a potent greenhouse gas, are flared off for environmental and safety reasons. This process results in enough fuel to provide the combined natural gas consumption of Germany and France. The research team developed a thermophotovoltaic device to convert thermal energy to electricity at a high efficiency using proprietary emitters and combustion system. With the current focus being fuel efficiency and the combustion process, the assembly was simulated using ANSYS Fluent modelling software and the following parameters were optimized: air/fuel ratios, flow rates, and inlet sizes. Simultaneously the heat transfer across …

Additive Manufacturing Of High Solids Loading Hybrid Rocket Fuel Grains, Stephen P. Johnson, Michael Baier, Ibrahim E. Gunduz, Steven F. Son

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hybrid rocket motors offer many of the benefits of both liquid and solid rocket systems. Like liquid engines, hybrid rocket motors are able to be throttled, can be stopped and restarted, and are safer than solid rocket motors since the fuel and oxidizer are in different physical states. Hybrid rocket motors are similar to solid motors in that they are relatively simple and have a high density-specific impulse. One of the major drawbacks of hybrid rocket motors is a slower burning rate than solid rocket motors. Complex port geometries provide greater burning surface area to compensate for lower burning rates …

Reaction Tuning Of Selectively Deposited Nano-Thermite Inks For Thrust And Heat Deposition, Raghav Ramachandran

Open Access Theses

Currently there is very little systematic work that quantifies the performance of energetic materials in terms of thrust or heat deposition applied to electronic circuits. A better understanding of the interactions between nano-scale energetic materials and electronic systems, as a function of stoichiometry is needed for enhanced defeat. Both of these needs are addressed in this research. Formulations of Al-CuO and Al-Bi2O3 nano-thermites were prepared at different equivalence ratios and selectively deposited onto silicon substrates and thrust and heat deposition of these materials was quantified. Both nano-thermite systems produced maximum thrust near stoichiometric ratios, and more fuel-rich mixtures led to …

Data Driven Low-Bandwidth Intelligent Control Of A Jet Engine Combustor, Nathan L. Toner

Open Access Dissertations

This thesis introduces a low-bandwidth control architecture for navigating the input space of an un-modeled combustor system between desired operating conditions while avoiding regions of instability and blow-out. An experimental procedure is discussed for identifying regions of instability and gathering sufficient data to build a data-driven model of the system's operating modes. Regions of instability and blow-out are identified experimentally and a data-driven operating point classifier is designed. This classifier acts as a map of the operating space of the combustor, indicating regions in which the flame is in a "good" or "bad" operating mode. A data-driven predictor is also …

An Experimental Investigation Of Self-Excited Combustion Dynamics In A Single Element Lean Direct Injection (Ldi) Combustor, Rohan M. Gejji

Open Access Dissertations

The management of combustion dynamics in gas turbine combustors has become more challenging as strict NOx/CO emission standards have led to engine operation in a narrow, lean regime. While premixed or partially premixed combustor configurations such as the Lean Premixed Pre-vaporized (LPP), Rich Quench Lean burn (RQL), and Lean Direct Injection (LDI) have shown a potential for reduced NOx emissions, they promote a coupling between acoustics, hydrodynamics and combustion that can lead to combustion instabilities. These couplings can be quite complex, and their detailed understanding is a pre-requisite to any engine development program and for the development of predictive capability …

High Pressure Combustion And Supersonic Jet Ignition For H2/Air, Michael G. Woodworth, Sayan Biswas, Li Qiao

The Summer Undergraduate Research Fellowship (SURF) Symposium

There are many incentives to increase the fuel efficiency of combustion processes. This paper looks at two available options to achieve this goal. The former aims to develop an experimental method that can analyze combustion at extremely high pressures to improve the understanding of high pressure H2/air combustion. Experimental data has been lacking a suitable combustion diagnostic to visualize high pressure combustion processes, making it difficult to improve the process. Improvement of x-ray diffraction tomography in a windowless combustor makes it possible to see flame propagation at high pressure. The procedure and chamber are still in the design phase, yet …

Development Of Combined Dual-Pump Vibrational And Pure-Rotational Coherent Anti-Stokes Raman Scattering (Dpvcars And Prcars) System, Shenli Yuan, Aman Satija, Robert Lucht

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coherent anti-Stokes Raman scattering (CARS) [1,2] is a spatially-resolved, time-resolved spectroscopic technique for quantitative measurements in reacting flows [3 – 6]. This work demonstrates a combination of N₂/O₂/CO₂ dual-pump vibrational coherent anti-Stokes Raman scattering (DPVCARS) system and two-beam pure-rotational coherent anti-Stokes Raman scattering (PRCARS) system. It is based on the previous development of combined VCARS and PRCARS system which was used to obtain temperature measurements in non-premixed H₂-air flames. The new combined system will be used to measure the temperature profiles and major species concentrations such as N₂/O₂/CO_{2 …}

Laboratory Apparatus For Gas Turbine Combustion Development, Dustin Lee Cruise

Open Access Theses

The next generation of combustor technology will be required to meet the demands of a world more focused on greenhouse gases and global warming. Due to this new focus on emission control, combustors must produce less NO x , while operating in a higher pressure environment that is more prone to combustion instabilities.

This work focuses on the development of a lab and combustor that will be used for the next generation combustor development. The lab development includes layout and organization, facilities, measurement and instrumentation, automation of the testing process, and an imaging tool for diagnostics.

A Lean Direction Injection …

Quantitative Imaging Of Radiation Intensity From A Turbulent Sooting Flame, Robert Kapaku

Open Access Theses

Quantitative imaging of radiation intensity (QIRI) is a method of investigating temporally and spatially resolved radiation from species and particulates in turbulent flames. The current study reports quantitative images of radiation intensity from a turbulent ethylene flame that matches the Reynolds number (15,200) of a non-sooting flame from the International Workshop on Measurement and Computation of Turbulent Non-premixed Flames. A calibrated high-speed infrared camera with four band-pass filters was used to acquire images of radiation intensity in wavelengths corresponding to carbon dioxide, water vapor, and soot. The luminous flame measurements show thin radiating structures corresponding to soot layers and higher …