Mechanical Engineering Commons^™

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• ASME Hosts Seminar on ANSYS Simulation

Mini Rc Baja Car, Jason Schindler

All Undergraduate Projects

Incorporating each aspect of engineering incorporated into a senior project is difficult. That is why an RC Baja car is a great senior project for Mechanical Engineering students. The approach that students must take to design, construct, and test the car is to set parameters, and to make overall goals that can be easily measured. These goals include, but not limited to things like a $700 budget and the ability to withstand a 1-foot drop to a flat surface on all four wheels simultaneously. First, the design must meet the specifications and rules that are set previously. This ensures that …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Undergraduate Awarded for Combustion Research at Conference

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Undergraduate Student Wins Award in Internal Combustion Engine Division Competition

Asme Student Design Competition, Marcus Todd

Mahurin Honors College Capstone Experience/Thesis Projects

For the completion of my capstone project with the Western Kentucky University Honors College, the following document details my experience with the American Society of Mechanical Engineer (ASME) Student Design Competition. This project was completed in a two semester sequence through working with a team of four. One semester focusing primarily on the design and the other on fabrication and evaluation. The 2019 ASME competition was the Pick and Place Race. In this event, 46 teams were challenged to design and construct a device having the ability to pick up balls of varying size. Both the design and assembly process …

Testing Of A Human Powered Vehicle, Bailey Conard, Marlee Reynolds

Williams Honors College, Honors Research Projects

The University of Akron’s Human Powered Vehicle Team designed a high performing, fully functioning vehicle that is safe, efficient, and practical for the 2018-2019 season. These objectives were the main priorities when it came to the initial stages of designing the vehicle. In addition, the vehicle was designed in accordance with the ASME 2019 Human Powered Vehicle Challenge guidelines to satisfy all the rules and requirements. Additional priorities have been created to teach practical engineering skills and techniques to the students participating in the project through different points in the production process including research, vehicle design, manufacturing, and testing.

The …

Asme Rc Baja Car: Suspension And Chassis, C. Aidan Pringle

All Undergraduate Projects

Each year the regional chapter of the American Society of Mechanical Engineers (ASME) put on a Radio Controlled (R/C) Baja car competition. The R/C car designed for the competition must compete in two events, a slalom sprint and an obstacle course. A successfully designed car will not only be able to complete each event but also be competitive in each event. A main component to the success of the R/C car is the suspension. The suspension design for this year’s car must operate effectively without interfering with the steering and drivetrain designed by Walter Lackey. The suspension utilizes a transverse …

Paper Airplane Building Machine: Paper Loading, Power Source, Machine Frame, Abdullah A. Aldakhail

All Undergraduate Projects

The project was motivated by an ASME 2016 design challenge. The challenge was to design and manufacture a device that would turn a single sheet of paper into a paper airplane and launch it. The project was divided into three portions. The proposal was biased on loading the paper into the machine, design and manufacture the machine frame and provide a reliable power source. A slow rpm motor was needed for the loading mechanism to prevent the paper from being damaged. To avoid any deflection in the frame, the total weight of the machine had to be considered. The shear …

Paper Airplane Building Machine: Paper Folding Mechanism, Abdullah Y. Alshahrani

All Undergraduate Projects

The project was motivated by an ASME 2016 design challenge. The challenge was to design and manufacture a device that would turn a single sheet of paper into a paper airplane and launch it. The project is divided into three portions. The three portions are the frame and paper loading, folding mechanism, and launching. The circumference equation is used, to determine what the proper speed of the paper loading motor is. Notably, a slow rpm motor is needed for the loading mechanism to prevent the paper from being damaged. To avoid any deflection in the frame, the total weight of …

Asme Mini-Baja Rc Car (Steering And Suspension Systems), Michael E. Cox

All Undergraduate Projects

The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take apart and repair quickly. These design problems were approached using basic mechanical design concepts such as gear kinematics, spur and bevel …

Paper Airplane Building Machine: Paper Airplane Launcher, Hassan A. Bujayli

All Undergraduate Projects

The project was motivated by an ASME 2016 design challenge. The challenge was to design and manufacture a device that would turn a single sheet of paper into a paper airplane and launch it. The project is divided into three portions. The three portions are the frame and paper loading, folding mechanism, and launching. The circumference equation is used, to determine what is the proper speed of the paper loading motor. Notably, a slow rpm motor is needed for the loading mechanism to prevent the paper from being damaged. To avoid any deflection in the frame, the total weight of …

The University Of Akron Human Powered Vehicle Team, Maria E. Rizzo, Andrew J. Derhammer, Christopher M. Trowbridge, Timothy M. Nutt, Joseph R. Boyd, Jeremy W. Marcum, Jonathan E. Adams, Donald G. Haiss, Julia Wood, Brian D. Goshia, Scott T. Fagan, Joshua D. Everhard, Rebecca L. Slivka

Williams Honors College, Honors Research Projects

The University of Akron Human Powered Vehicle Team’s 2016 vehicle, Klokan, was designed, manufactured and tested with safety, reliability, performance and ease of use in mind. The vehicle is a fully faired tadpole trike with a lightweight aluminum frame constructed from 6061-T6 tubing having a total weight of 8.9 lbs. To complement the lightweight frame, the fairing is constructed from polycarbonate, PETG and carbon fiber strips which combine into a lightweight, easy to manufacture weather barrier and aerodynamic structure. Klokan was designed to be a safe and efficient mode of everyday transportation which ensures that riders are sufficiently protected by …

Rc Baja Competition Drive Train And Differential, Chelsea Dowdell, Nathan Wilhelm

Mechanical Engineering and Technology Senior Projects

The American Society of Mechanical Engineers holds regional student design competitions each year with both a reoccurring RC Baja competition with a new challenge course each year. This project covers the design and manufacturing of components for a radio controlled car to race in the annual ASME RC Baja competition. For this project the car was broken down into its component subsystems and divided between two partners. It was then determined which components of each respective subsystem could be purchased and which required design and manufacture within the rules set forth in the ASME Baja competition rule book. All of …

Asme R/C Baja Car Suspension And Steering, Nathan Wilhelm

Mechanical Engineering and Technology Senior Projects

The American Society of Mechanical Engineers holds regional student design competitions each year with both a reoccurring RC Baja competition with a new challenge course each year. This project covers the design and manufacturing of components for a radio controlled car to race in the annual ASME RC Baja competition. For this project the car was broken down into its component subsystems and divided between two partners. It was then determined which components of each respective subsystem could be purchased and which required design and manufacture within the rules set forth in the ASME Baja competition rule book. All of …

Asme Human Powered Vehicle, Benjamin Knaus, Philip Basmadjian, Nick Supat

Mechanical Engineering

Speed Solutions has been contracted to design and build a Human Powered Vehicle (HPV) frame and drivetrain for the Cal Poly HPV club to use in their 2011 race season. This project is being funded by the Cal Poly HPV club and their sponsors. The goal is to design, test and build a bicycle frame that the HPV club can attach to a fairing of their design. Primary design considerations will include speed, weight, cost, rider ergonomics, reliability and ease of repair. This vehicle will be used to compete in ASME’s Human Powered Vehicle Challenge (HPVC) series of races.