Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Electrical and Computer Engineering (28)
- Geological Engineering (24)
- Civil and Environmental Engineering (23)
- Aerospace Engineering (21)
- Biomedical Engineering and Bioengineering (21)
-
- Chemical Engineering (6)
- Materials Science and Engineering (4)
- Controls and Control Theory (3)
- Other Mechanical Engineering (3)
- Process Control and Systems (3)
- Complex Fluids (2)
- Industrial Technology (2)
- Operations Research, Systems Engineering and Industrial Engineering (2)
- Structural Materials (2)
- Applied Mathematics (1)
- Applied Mechanics (1)
- Architectural Technology (1)
- Architecture (1)
- Automotive Engineering (1)
- Bioresource and Agricultural Engineering (1)
- Civil Engineering (1)
- Computational Engineering (1)
- Construction Engineering (1)
- Construction Engineering and Management (1)
- Dynamics and Dynamical Systems (1)
- Electrical and Electronics (1)
- Electro-Mechanical Systems (1)
- Engineering Mechanics (1)
- Keyword
-
- Temperature (5)
- Analysis (3)
- Flotation (3)
- Absorber (2)
- Aluminum (2)
-
- Automation (2)
- Cellulose (2)
- Cleaning (2)
- Composite material (2)
- Diffusion (2)
- Dust (2)
- Efficiency (2)
- Humidity (2)
- Hydropower (2)
- Mechanism (2)
- Moisture content (2)
- Solar energy (2)
- Solution (2)
- Thermodynamics (2)
- Thickness (2)
- Vibration (2)
- Working fluid (2)
- 3D Surface Profiles (1)
- 3D scanning (1)
- A particle (1)
- Abrasive particles (1)
- Absorption (1)
- Acute suspension (1)
- Adiabatic engine thermodynamic cycle. (1)
- Adsorption (1)
Articles 1 - 30 of 63
Full-Text Articles in Mechanical Engineering
Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova
Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova
Technical science and innovation
The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …
Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov
Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov
Technical science and innovation
In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …
Dying Of Natural Silk Deglued By Various Methods, Venera Djavdatovna Khamidova
Dying Of Natural Silk Deglued By Various Methods, Venera Djavdatovna Khamidova
Technical science and innovation
Products made of natural silk are indispensable for their hygienic properties and will always be in great demand. To obtain an even and intense coloration on a textile material, it is necessary to ensure its effective preparation with the most complete removal of hydrophobic contaminants (both natural and silicone oils applied during the weaving process, lubricants, etc.), which hinder the dyeing of the substrate and reduce the color characteristics of the obtained colors. Therefore, the issue of preparing natural silk for dyeing is relevant. In view of the sensitivity of the main fiber-forming component of natural silk - fibroin to …
Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova
Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova
Technical science and innovation
This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …
Globular Protein For Surface Modification Of Cellulosecontaining Materials, Nodira Saydaliyeva
Globular Protein For Surface Modification Of Cellulosecontaining Materials, Nodira Saydaliyeva
Technical science and innovation
The purpose of this work is the chemical modification of cotton fabrics with natural globular protein. Modification was carried out in the process of finishing cotton fabrics, after decoction and bleaching in a continuous mode. The effect of modification on the strength, protein content and functional groups of cotton fabric has been studied. According to the results obtained using the AUTOGRAPH AGS-N machine, it was found that the modification of cotton fabrics with a solution of globular protein increases the strength of the treated fabrics, depending on the concentration of the modifier and the temperature regime. Treatment with a highly …
Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova
Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova
Technical science and innovation
This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …
Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova
Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova
Technical science and innovation
This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …
Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev
Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev
Technical science and innovation
The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …
Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov
Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov
Technical science and innovation
In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …
Experimental Studies On Determination Of Loading And Laws Of Motion Of The Accelerator Of The Raw Material Chamber Of The Saw Gin, Yusuf Abbasovich Axmedjanov
Experimental Studies On Determination Of Loading And Laws Of Motion Of The Accelerator Of The Raw Material Chamber Of The Saw Gin, Yusuf Abbasovich Axmedjanov
Technical science and innovation
The findings of research conducted on the saw gin’s accelerator in its raw chamber are displayed at different belt drive eccentricity values, both in the absence of load and with technological load. It has been discovered that, in a steady-state scenario without a load, the maximum torque value increases as the eccentricity of the system’s tension roller increases in a technological load scenario, the torque minimum is noted at an eccentricity of e = 3 mm. When conducting experiments under load, the average angular velocity fluctuation amplitude and the coefficient of unevenness of rotation have minimum values at zero eccentricity …
Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov
Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov
Technical science and innovation
This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …
A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov
A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov
Technical science and innovation
This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …
Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev
Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev
Technical science and innovation
This article analyzes the results of changes to the working parts of a cotton cleaning unit from small and large impurities. It is known that the UXK installation uses continuous cleaning technology, that is, the cotton entering the purifier is cleaned in all its cleaning sections and then transferred to another process. In these sections, pieces of cotton wool from the separated waste are regenerated in a separate drum. Existing purifier suppliers use a manually operated mechanical system to monitor its performance. These factors do not make it possible to control the cleaning process when the quality indicators of cotton …
Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov
Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov
Technical science and innovation
Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …
Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova
Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova
Technical science and innovation
Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …
Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov
Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov
Technical science and innovation
The article discusses the errors associated with the moisture measuring transducer that is based on the cylindrical electrode, along with their sources and calculation formulas for error elimination. The initial capacitance of the capacitive electrode humidity converter is dependent on its geometric parameters, such as the radii of the electrodes and their length. Accurate calculation of these geometric parameters enables the reduction of regular measurement errors in the input and switching circuit of the moisture converter to a minimum value, resulting in a significant increase in the informativeness and accuracy of the output signal. Consequently, some sources of measurement errors …
Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova
Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova
Technical science and innovation
autotransformers, methods, diagnostics, efficiency, monitoring.Particular attention is given to analyzing the gas composition of transformer oil, which is a sensitive indicator of various defects such as thermal breakdown and heating. In addition, methods based on the measurement of external magnetic field strength are discussed. This technique provides a unique opportunity to detect magnetic anomalies associated with possible defects in the structural components of the transformer. The article emphasizes that successful monitoring requires an integrated approach, combining different techniques. The authors analyze the advantages and limitations of each method and offer practical recommendations for integrating these methods into maintenance systems. In …
Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova
Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova
Technical science and innovation
The paper evaluates the influence of technological process parameters, namely die temperature and pressure force, on the quality of foil stamping, which is one of the types of finishing having a wide range of applications due to giving unique decorative and protective elements to printed products. When evaluating the influence of process parameters on the linearity and coverability of the image, it was found that the pressure force has less influence on the result than the temperature. According to the data of the study, it can be concluded that the maximum percentage of completeness of covering is achieved at a …
Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev
Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev
Technical science and innovation
Many traffic flow parameters affect the performance of the road network at high voltage. These are low vehicle speeds, high vehicle distances relative to road capacity, and density per unit time (lane occupancy). In turn, a number of factors affect the decrease in traffic speed: the presence of slow-moving vehicles in the stream; pedestrians crossing the road irregularly; increase in traffic flow, etc. The issues of public transportation depend on many factors, each of which requires a separate approach and a complex solution. In large cities around the world, the quality indicators of public transport services, including the issues of …
Programming A Numerical Model Of Spherical Propagation Of Electric Discharge In Liquid, Mukhiddin Kushshaevich Khudjaev
Programming A Numerical Model Of Spherical Propagation Of Electric Discharge In Liquid, Mukhiddin Kushshaevich Khudjaev
Technical science and innovation
The subject of research is the determination of the hydrodynamic parameters of a liquid in the process of an electric discharge in a liquid. A numerical algorithm was constructed and a program was drawn up to determine the hydrodynamic parameters of a liquid in the process of an electric discharge in a liquid for a spherical problem. In the numerical solution of the problem, a uniform rectangular grid was used. Some results of computational experiments are presented.
Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd
Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd
Technical science and innovation
Currently, much attention is paid to the issue of energy efficiency of gas processing enterprises. The continuous growth of world prices for energy resources requires constant improvement of the management system, providing the most optimal conditions for the flow of technological processes. A conceptual model of the heat-mass transfer process occurring in the absorber as an object of research has been developed, which characterizes the relationship of the variables involved in the drying process of natural gas, control, measurable and immeasurable, as well as controlled parameters have been selected, which are used to develop and study a mathematical model of …
The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev
The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev
Technical science and innovation
This article presents the results of an analytical study of the process of loosening and cleaning raw cotton from small debris by pileging working bodies of purifiers, on the basis of which directions for further research were chosen to optimize the parameters of the developed pile drum with spherical piles and rubber strips. Cotton entering production contains impurities. The processes of loosening and cleaning the fiber shreds are key in the initial stages of ginning, as they prepare the raw cotton for ginning and directly affect the reliability, productivity of these processes and the quality of the resulting fiber. Weed …
An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov
An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov
Technical science and innovation
The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …
Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti
Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti
Technical science and innovation
Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …
Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva
Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva
Chemical Technology, Control and Management
The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …
Nozzle Reactive Hydroturbine With Guide Device, O O. Bozarov, Kh S. Usarov, R Aliyev, S F. Ergashev
Nozzle Reactive Hydroturbine With Guide Device, O O. Bozarov, Kh S. Usarov, R Aliyev, S F. Ergashev
Technical science and innovation
The article presents the principle of operation of a jet turbine with a nozzle based on the "Segner" wheel and studies its shortcomings. In order to eliminate the identified shortcomings, a guide device was developed, which is installed inside the hydraulic turbine impeller. Using the Bernoulli equations and the Zhukovsky theory, the energy parameters of a microhydroelectric power station with a developed divertor device and the water flow rate in a hydroturbine are determined. The energy parameters calculated on the basis of theoretical results are analyzed, and it is found that the efficiency of a hydroturbine increases by 10-20% depending …
The Vibration Sources Of Car Tractor Attachments, Sh Kh Kurbanov, U A. Rajapbayev
The Vibration Sources Of Car Tractor Attachments, Sh Kh Kurbanov, U A. Rajapbayev
Technical science and innovation
This article presents measures to protect against the noise of operators during the work of machine-tractor units, and to prevent the occurrence of vibration as a result of tractor movement during work. Methods of acoustic processing of noise and vibration D-144; It has been proven that the noise characteristics of D-240T engines vary depending on the frequency of rotation of the crankshaft.
Assessment Of Stability Of The Body Elements Of A Dynamometric Car For Special Technical Purpose, F F. Khikmatov, Y O. Ruzmetov
Assessment Of Stability Of The Body Elements Of A Dynamometric Car For Special Technical Purpose, F F. Khikmatov, Y O. Ruzmetov
Technical science and innovation
In the work, studies were carried out to assess the stability of the body elements of a dynamometric car for special technical purposes for the railways of the Republic of Uzbekistan. Distinctive features of the proposed design of the dynamometric car from the car of the analogue model 61-907 are considered. The results of theoretical calculations for the stability of the body elements of the developed design of a dynamometric car in three design modes are given: under compression, tension and impact.
Extraction Of Cellulose Nanocrystals From Secondary Paper Waste And Their Use In Paper Production, E A. Egamberdiev, S K. Norboyev
Extraction Of Cellulose Nanocrystals From Secondary Paper Waste And Their Use In Paper Production, E A. Egamberdiev, S K. Norboyev
Technical science and innovation
Cellulose nanocrystals were obtained by hydrolysis process from waste paper industry. The result of Fourier transform infrared spectroscopy (FTIR) for nanocellulose showed that no new chemical bonds were formed during the preparation of nanocellulose. The results of X-ray diffraction showed that the crystallinity of the macules produced in the treated and untreated paper industry was 66% and 73.8%, respectively. The results of nanocellulose revealed a natural needle-like fiber with a length of 300 nm to 600 nm, a diameter of 10 nm to 30 nm, and an aspect ratio in the range of 10 to 60. It was found that …
Analysis Of Mechatronically Controlled Turbines And Their Layout Schemes Used In Middle-Class Internal Combustion Engines, F Umerov, A Yangibaev
Analysis Of Mechatronically Controlled Turbines And Their Layout Schemes Used In Middle-Class Internal Combustion Engines, F Umerov, A Yangibaev
Technical science and innovation
This article will talk about the prospects for the possible use of gas-cylinder equipment on turbine internal combustion engines with a direct power supply system, consider the main possible methods of using such equipment and their results, identifying the best among them, taking such well-known car models as Chevrolet Tracker and Chevrolet Onyx as an example. Today there is an increase in the trend of transferring the car to two fuel supply. Installing gas-cylinder equipment on a turbo has also become quite popular. It is not difficult to make such a translation. It is only important to do this in …