Mechanical Engineering Commons^™

Co-Simulation Framework For Power Distribution System Analysis With Humans In The Loop, Victor H. Ayon

Mechanical Engineering ETDs

Recent developments in the area of power generation have led to an increased penetration of storage and distributed energy resources (DER) in power distribution systems. As a result, new and enhanced energy management systems will be necessary as the deployment of DERs, as well as the need to control loads, continues to increase in the coming years. Advanced management systems are especially important to achieve resilient power delivery during emergency situations. During a blackout for example, a section of a distribution feeder could island to operate as a microgrid to ensure critical services such as water, food, and medical care …

College Of Engineering Senior Design Competition Fall 2017, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad

Makara Journal of Technology

Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …

Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo

Makara Journal of Technology

An audio-magnetotelluric (AMT) survey has been performed at Cepu oil field located in Indonesia. The objective of this research is to detect resistivity structures of this important hydrocarbon rock. This research can be classified as an innovation in application of the AMT method for hydrocarbon exploration. The lack of seismic resolution has been provided by the AMT method, especially in the location of sub-basalt and sub-salt plays. In additional, the cost of AMT survey is quite low compared to seismic. The forward modelling is included in this research to understand the measurement data response from a mathematical model. In the …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.

Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid

Makara Journal of Technology

In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …

Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul

Makara Journal of Technology

This paper reports the synthetic, characterization and theoretical evaluation of new class of hybrid Heck-immine system involving mixed moieties of vinylene (C=C) and azomethines (CH=N) which has been successfully integrated into an addition of organic semiconducting materials. The assessment of 4-[(hexyloxyphenyl)methylene]amino)-4’-chloro-stilbene (HEXCS) based on Donor (D)-π-Acceptor (A) was evaluated as active semiconductor material candidates via several spectroscopic and analytical techniques. In turn, the investigation of its potential as dopant system in conductive film was successfully deposited on indium tin oxide (ITO) coated substrate via spin coating method. The relationship between electronic and optical properties, chemical modelling at molecular interactions and …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

3d Printed Pcu/Uhmwpe Polymeric Blends For Artificial Knee Meniscus, Raissa Araujo Borges

Graduate Theses and Dissertations

3D printing was used to fabricate porous artificial knee meniscus material from biocompatible polymeric blends of polycarbonate-urethane (PCU) and ultra-high-molecular-weight polyethylene (UHMWPE) to enable “weep” lubrication that mimics the native meniscus. 3D printed and molded pure PCU, as well as molded PCU and UHMWPE, were used for comparison. Preliminary printing was done to evaluate the impact of process parameters on the results. The samples were subject to a variety of rotational oscillating friction and wear tests under simulated body fluid and loading conditions to replicate the natural motion of the knee. Results show that 3D printed PCU samples yielded a …

Flexible Custom Electric Skateboard, Caleb Adam Kelsay

Electrical Engineering

At Cal Poly traveling long distances only accessible by foot such as across campus or from the car park to class can be tiring and time-consuming. While not physically demanding, the trek consumes time in our tight college life schedule. To improve our time efficiency this project provides a relatively lightweight, powered solution to quickly and effectively travel long distances while maintaining full control and safety even on hills, a current limitation of traditional skateboards.

This electric skateboard includes the battery capacity to travel all around campus on a single charge with a compact and flexible skateboard design that provides …

Hybrid Attitude Control And Estimation On So(3), Soulaimane Berkane

Electronic Thesis and Dissertation Repository

This thesis presents a general framework for hybrid attitude control and estimation design on the Special Orthogonal group SO(3). First, the attitude stabilization problem on SO(3) is considered. It is shown that, using a min-switch hybrid control strategy designed from a family of potential functions on SO(3), global exponential stabilization on SO(3) can be achieved when this family of potential functions satisfies certain properties. Then, a systematic methodology to construct these potential functions is developed. The proposed hybrid control technique is applied to the attitude tracking problem for rigid body systems. A smoothing mechanism is proposed to filter out the …

Investigating Scalable Manufacturing Of High-Conductivity Wires And Coatings From Ultra-Long Carbon Nanotubes, Pouria Khanbolouki

Mechanical Engineering ETDs

Carbon nanotubes (CNTs) are a promising candidate for next generation of electrical wirings and electromagnetic interference (EMI) shielding materials due to their exceptional mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can potentially replace current conductors in many industries including aerospace, automotive, gas and oil.

This thesis investigates a new manufacturing approach, based on conventional solution coating and wire drawing methods, to fabricate high conductivity wires and coatings from ultra-long carbon nanotubes. …

Development Mems Acoustic Emission Sensors, Adrian Enrique Avila Gomez

USF Tampa Graduate Theses and Dissertations

The purpose of this research is to develop MEMS based acoustic emission sensors for structural health monitoring. Acoustic emission (AE) is a well-established nondestructive testing technique that is typically used to monitor for fatigue cracks in structures, leaks in pressurized systems, damages in composite materials or impacts. This technology can offer a precise evaluation of structural conditions and allow identification of imminent failures or minor failures that can be addressed by planned maintenances routines. AE causes a burst of ultrasonic energy that is measured as high frequency surface vibrations (30 kHz to 1 MHz) generated by transient elastic waves that …

Measurement Of Speed Of Sound Profile Using Laaces Balloon, Zhuang Li, Brett Schaefer, Brian Schaefer, William Dever, Tyler Morgan, Matthew Foltz

2017 Academic High Altitude Conference

The goal of this mission is to test the speed of sound at different altitudes and ultimately at a maximum height of 100,000 feet (30 km). In conjunction with this testing, environmental parameters including temperature, pressure, and humidity are measured and used to calculate the speed of sound to compare to the measured results. The team constructed the payload “Dorothy” using polystyrene foam due to its lightweight and thermal isolation property. An ultrasonic sensor with a reflection mirror were installed outside payload box to measure speed of sound. All the sensors were calibrated. Software for the project was developed in …

Resilient And Real-Time Control For The Optimum Management Of Hybrid Energy Storage Systems With Distributed Dynamic Demands, Christopher R. Lashway

FIU Electronic Theses and Dissertations

A continuous increase in demands from the utility grid and traction applications have steered public attention toward the integration of energy storage (ES) and hybrid ES (HESS) solutions. Modern technologies are no longer limited to batteries, but can include supercapacitors (SC) and flywheel electromechanical ES well. However, insufficient control and algorithms to monitor these devices can result in a wide range of operational issues. A modern day control platform must have a deep understanding of the source. In this dissertation, specialized modular Energy Storage Management Controllers (ESMC) were developed to interface with a variety of ES devices. The EMSC provides …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Detecting Structural Defects Using Novel Smart Sensory And Sensor-Less Approaches, Amin Baghalian

FIU Electronic Theses and Dissertations

Monitoring the mechanical integrity of critical structures is extremely important, as mechanical defects can potentially have adverse impacts on their safe operability throughout their service life. Structural defects can be detected by using active structural health monitoring (SHM) approaches, in which a given structure is excited with harmonic mechanical waves generated by actuators. The response of the structure is then collected using sensor(s) and is analyzed for possible defects, with various active SHM approaches available for analyzing the response of a structure to single- or multi-frequency harmonic excitations. In order to identify the appropriate excitation frequency, however, the majority of …

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Parallel Computation Using Mems Oscillator-Based Computing System, Xinrui Wang, Ilias Bilionis, Salar Safarkhani

The Summer Undergraduate Research Fellowship (SURF) Symposium

In recent years, parallel computing systems such as artificial neural networks (ANNs) have been of great interest. In these systems which emulate the behavior of human brains, the processing is carried out simultaneously. However, it is still a challenging engineering problem to design highly efficient hardware for parallel computing systems. We will study the properties of networks of Microelectromechanical System (MEMS) oscillators to explore their capabilities as parallel computing infrastructure. Furthermore, we simulate the time-variant states of MEMS oscillators network under various initial conditions and performance of certain tasks. Recent theoretical results show that networks of MEMS oscillators have some …

Pulsed Laser Beam Welding Of Pd43Cu27Ni10P20 Bulk Metallic Glass, Ling Shao, Amit Datye, Jiankang Huang, Jittisa Ketkaew, Sung Woo Sohn, Shaofan Zhao, Sujun Wu, Yuming Zhang, Udo D. Schwarz, Jan Schroers

Electrical and Computer Engineering Faculty Publications

We used pulsed laser beam welding method to join Pd₄₃Cu₂₇Ni₁₀P₂₀ (at.%) bulk metallic glass and characterized the properties of the joint. Fusion zone and heat-affected zone in the weld joint can be maintained completely amorphous as confirmed by X-ray diffraction and differential scanning calorimetry. No visible defects were observed in the weld joint. Nanoindentation and bend tests were carried out to determine the mechanical properties of the weld joint. Fusion zone and heat-affected zone exhibit very similar elastic moduli and hardness when compared to the base material, and the weld joint shows high …

Personality Trait Based Intervention For Workplace Accident Prevention, Yassierli Yassierli, Nurhayati Nurhayati, Marisa Anatasia, Shamsul Bahri

Makara Journal of Technology

Previous research has suggested that some traits may be useful as the predictors of risk behaviours behaviors. Therefore, personality traits seem to play a role in accident involvement. The purpose of this study is was to explore the relationship between the personality traits based on the Big Five Inventory (BFI) and worker accident experiences in order to elaborate personality traits based intervention for workplace accident prevention. A cross cross-sectional study was conducted among 173 workers in a cement company using a set of questionnaires consisting of respondents’ characteristics, BFI, and self-reported accident experience. The correlations were computed using Goodman Kruskal’s …

Physical And Mechanical Properties Of Palm Kernel Oil-Based Polyester Polyurethane/Multi-Walled Carbon Nanotube Composites, Khairul Anuar Mat Amin, Muhammad Alif Zailani, Nurul Nabilah Zulkifli, Khairiah Haji Badri

Makara Journal of Technology

In this study, polyurethane (PU) films from palm kernel oil-based polyester (PKO-p) incorporated multi-walled carbon nanotubes (MWNTs) are prepared via a evaporative casting method. Nanoparticle fluid dispersions containing 0.02%, 0.03%, and 0.05% wt. of MWNTs are added into PKO-p based resin and mixed by digital probe sonicator for 30 min followed by mixing with isocyanate to produce PU-MWNTs composite films. The mechanical properties, swelling, water vapour transmission rate (WVTR) and conductivity of the PU-MWNTs composite films are examined. Results show that the toughness (T) or flexibility, the tensile strength (TS), and Young’s modulus (YM) values of PU-MWNTs composite films increase …

Ethanol Purification Using Activated Natural Zeolite, Chandra Wahyu Purnomo, Nelliza Putri, Indra Perdana, Hirofumi Hinode

Makara Journal of Technology

Bio ethanol is one of the potential fuels in the future. However, ethanol in water mixture has an azeotropic concentration of 95.6 wt. %, which makes it difficult to purify further. The common method of purification is by using an azeotropic distillation column, which requires an intensive energy and an addition of specific solvent. In this study, ethanol purification is done using an adsorption column packed with zeolite Raschig rings. The natural zeolite ring was modified beforehand using the NaOH solution to enhance the material’s water adsorption performance. The ethanol purity can reach more than 99% with the modified zeolite …

Spectroscopic Contrast Of Diarylethene Molecules On Octanethiol Monolayer, Arramel Arramel, Tibor Kudernac, Nathalie Katsonis, Bernard Lucas Feringa, Bart Jan Van Wees

Makara Journal of Technology

We present a systematic scanning tunneling microscopy (STM) study of bias-dependent imaging of disulfur diarylethene (2S-DE) molecules on octanethiol (C8) monolayer at room temperature. In a rigid confinement of the C8 matrix, we did not observe any significant variation in the appearance of the 2S-DE. On the contrary, a reversal in the apparent height of the 2S-DE was present when the molecule was situated on a gold vacancy island. We attributed this finding to the presence of a new electronic state that became accessible for a tunneling event. In addition, the C8 surface structure underwent a reversible phase transformation from …

Residual Stress Measurements On The Tig Weld Joint Of 57fe15cr25ni Austenitic Steel For Structural Material Applications By Means X-Ray Diffraction Techniques, Parikin Parikin, Agus Hadi Ismoyo, Riza Iskandar, Arbi Dimyati

Makara Journal of Technology

Measurements of residual stress on the 57Fe25Cr15Ni steel plate with no-filler TIG-welding process were carried out. This work was conducted to determine the nature of weld ability in synthesized steel. The bulks were formed in a dimension of 30x20x7 mm3 to ease data retrieval. Results show that the largest residual stress occurred in the weld metal area, amounting to 82.40 MPa with lattice stretching of 0.18%. Conversely, the values decreased to 65.92 MPa and a stretch of 0.14% in the HAZ area. This residual stress is a tensile stress that can reduce the mechanical strength of the material since it …

An Efficient Palladium-Thiourea Catalysed Heck Cross-Coupling Reaction For Molecular Electronic Interest, Wan M. Khairul, Mohd Shahrul Shahmi Md Shariff, Rafizah Rahamathullah, Adibah Izzati Daud, Mustaffa Shamsuddin, Siti Kamilah Che Soh

Makara Journal of Technology

The synthesis and utilization of C-C bonds formation are concerned about the key steps for the building of several conducting molecular electronics involving many asymmetric catalysts approached, which is an essential task that most researchers would ignore in preparing these materials to enhance the production yield of cross-coupling materials. Despite the enormous progress, there still remains a great demand for economic and practicable cross-coupling processes involving ultra-low catalyst loadings with high turnover numbers due to the employment of conventional metal catalyst. Thus, there has been an excessive interest to cultivate non-phosphine palladium catalysts for excellent achievement of activity, stability, and …

Urban Drainage Management And Flood Control Improvement Using The Duflow Case Study: Aur Sub Catchment, Palembang, South Sumatra, Indonesia, Charlotte De Fraiture, Robiyanto Hendro Susanto, F.X. Suryadi, Harrini Mutiara Hapsari Wahyu

Makara Journal of Technology

Urban flooding often times staggers the livelihood in an urban area, which most likely happens in the lowland urban area. Therefore, the existing urban drainage system should be improved in order to tackle the upcoming urban flooding events, which are more than likely to be more devastating than those in the previous years. The research location is in Palembang, Sumatra, Indonesia, where 30% of its urban part is a lowland area. The selected Aur Sub Catchment is located in Silaberanti. The main objective of this research is to improve the current drainage system in order to achieve the optimal design …