Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 8 of 8
Full-Text Articles in Mechanical Engineering
An Evaluation Of Constitutive Laws And Their Ability To Predict Flow Stress Over Large Variations In Temperature, Strain, And Strain Rate Characteristic Of Friction Stir Welding, Katherine Lynn Kuykendall
An Evaluation Of Constitutive Laws And Their Ability To Predict Flow Stress Over Large Variations In Temperature, Strain, And Strain Rate Characteristic Of Friction Stir Welding, Katherine Lynn Kuykendall
Theses and Dissertations
Constitutive laws commonly used to model friction stir welding have been evaluated, both qualitatively and quantitatively, and a new application of a constitutive law which can be extended to materials commonly used in FSW is presented. Existing constitutive laws have been classified as path-dependent or path-independent. Path-independent laws have been further classified according to the physical phenomena they capture: strain hardening, strain rate hardening, and/or thermal softening. Path-dependent laws can track gradients in temperature and strain rate characteristic to friction stir welding; however, path-independent laws cannot. None of the path-independent constitutive laws evaluated has been validated over the full range …
Optimization And Correlation Of The Penn State Model Of Friction Stir Welding To Experimental Welds In 304l Stainless Steel, Devin Donaldson Furse
Optimization And Correlation Of The Penn State Model Of Friction Stir Welding To Experimental Welds In 304l Stainless Steel, Devin Donaldson Furse
Theses and Dissertations
A numerical model of friction stir welding developed by T. DebRoy, R. Nandan, and others has been optimized to fit experimental data of eleven welds of 304L stainless steel at various weld feed rates and spindle speeds. Optimization was used to determine the values of five difficult-to-measure model parameters. The optimal parameter values were then correlated to the weld machine inputs. The mechanical efficiency and the coefficient of friction were not correlated with feed rate, spindle speed, or axial pressure. Tool slip was positively correlated with feed rate, negatively correlated with spindle speed, and not correlated with axial pressure. The …
A Mechanistic Investigation Of Nitrogen Evolution In Pulverized Coal Oxy-Fuel Combustion, Andrew John Mackrory
A Mechanistic Investigation Of Nitrogen Evolution In Pulverized Coal Oxy-Fuel Combustion, Andrew John Mackrory
Theses and Dissertations
Oxy-fuel combustion is an enabling technology for capture of CO2 from coal combustion, the economics of which depends strongly on the ability of the process to produce low NOX emissions. The literature contains many reports of lower NOX emissions from oxy-fuel combustion but the reasons for this are not fully understood. The objective of this work was to gain understanding of nitrogen evolution under pulverized coal oxy-fuel conditions. Pulverized coal was burned in a once-through, down-fired, laminar flow reactor. Nitrogen compounds and other combustion species were measured at the reactor centerline as a function of distance from the burner. Dry …
Parametric Optimization Design System For A Fluid Domain Assembly, Matthew Jackson Fisher
Parametric Optimization Design System For A Fluid Domain Assembly, Matthew Jackson Fisher
Theses and Dissertations
Automated solid modeling, integrated with computational fluid dynamics (CFD) and optimization of a 3D jet turbine engine has never been accomplished. This is due mainly to the computational power required, and the lack of associative parametric modeling tools and techniques necessary to adjust and optimize the design. As an example, the fluid domain of a simple household fan with three blades may contain 500,000 elements per blade passage. Therefore, a complete turbine engine that includes many stages, with sets of thirty or more blades each, will have hundreds of millions of elements. The fluid domains associated with each blade creates …
One-Dimensional Radial Flow Turbomachinery Performance Modeling, Robert John Pelton
One-Dimensional Radial Flow Turbomachinery Performance Modeling, Robert John Pelton
Theses and Dissertations
The Two-Element In Series (TEIS) and Two-Zone models have been used successfully for over twenty years to model test data for radial flow compressors and pumps. The models can also be used to predict the performance of new machines provided that the model inputs can be accurately specified. Unfortunately, use of the TEIS and Two-Zone models as a predictive tool has been limited because an accurate and broadly applicable method of predicting the modeling parameters, etaA, etaB, chi and d2p does not exist. Empirical models have been developed to predict the TEIS and Two-Zone modeling parameters based on a large …
Structuring Emperical Methods For Reuse And Efficiency In Product Development Processes, Marshall Edwin Bare
Structuring Emperical Methods For Reuse And Efficiency In Product Development Processes, Marshall Edwin Bare
Theses and Dissertations
Product development requires that engineers have the ability to predict product performance. When product performance involves complex physics and natural phenomena, mathematical models are often insufficient to provide accurate predictions. Engineering companies compensate for this deficiency by testing prototypes to obtain empirical data that can be used in place of predictive models. The purpose of this work is to provide techniques and methods for efficient use of empirical methods in product development processes. Empirical methods involve the design and creation of prototype hardware and the testing of that hardware in controlled environments. Empirical methods represent a complete product development sub-cycle …
Electrothermomechanical Modeling Of A Surface-Micromachined Linear Displacement Microactuator, Christian D. Lott
Electrothermomechanical Modeling Of A Surface-Micromachined Linear Displacement Microactuator, Christian D. Lott
Theses and Dissertations
The electrothermomechanical characteristics of an electrically-heated polycrystallinesilicon microactuator are explored. Using finite-difference techniques, an electrothermal model based on the balance of heat dissipation and heat losses is developed. For accurate simulation, the relevant temperature dependent properties from the microactuator material are included in the model. The electrothermal model accurately predicts the steady-state power required to hold position, and the energy consumed during the thermal transient. Thermomechanical models use the predictions of temperature from the electrothermal solution to calculate displacement and force from pseudo-rigid-body approximations and commercial finite-element code. The models are verified by comparing experimental data to simulation results of …
Numerical Modeling Of Friction Stir Welding: A Comparison Of Alegra And Forge3, Alma H. Oliphant
Numerical Modeling Of Friction Stir Welding: A Comparison Of Alegra And Forge3, Alma H. Oliphant
Theses and Dissertations
The objective of this research was to evaluate the capabilities of ALEGRA, a Sandia National Labs hydrocode, and Forge3, a Transvalor S.A. product, to accurately model the Friction Stir Welding Process. ALEGRA and Forge3 are discussed in light of the inherent challenges of modeling Friction Stir Welding, and a rotational boundary condition is added to ALEGRA. Results are presented from Friction Stir Welding modeling outputs from both ALEGRA and Forge3. ALEGRA is shown to be incapable of modeling the Friction Stir Welding process, in large part due to its focus on shock propagation, which causes extremely small time steps. Forge3 …