Mechanical Engineering Commons^™

Musculoskeletal Adaptation Of Young And Older Adults In Response To Environmental, Physical, And Cognitive Conditions, Amy E. Holcomb

Boise State University Theses and Dissertations

Accidental falls present a large functional and financial burden among people aged 65 years and older. Falls, injuries associated with falls, and the fear of falling decrease quality of life, physical function, and independence for older adults. To prevent falls, improve stability, and protect joints from damage or injury, the typical response to "challenging" conditions include cautious gait, increase muscle co-contraction, and decreased range of motion. These compensatory strategies are more pronounced in the older adult population with apprehensive "cautious" gait at slower speeds, decreased knee flexion, and increased muscle activation around the knee and ankle. The underlying mechanisms and …

Phase Change Temperature Sensor For High Radiation Environment: Material, Additive Technology And Structure Development, Al Amin Ahmed Simon

Boise State University Theses and Dissertations

Performance of any sensor in a nuclear reactor involves reliable operation under a harsh environment (i.e., high temperature, neutron irradiation, and a high dose of ionizing radiation). In this environment, accurate and continuous monitoring of temperature is critical for the reactor's stability and proper functionality. Furthermore, during the development and testing stages of new materials and structural components for these systems, it is imperative to collect in-situ measurement data about the exact test conditions for real-time analysis of their performance. To meet the compelling need of such sensing devices, we propose radiation-hard temperature sensors based on the phase change phenomenon …

Effect Of Temperature On Abrasion Erosion In Particle Based Concentrating Solar Powerplants, Nipun Goel, Tessa Mei-Lin Fong, John P. Shingledecker, Andrew Russell, Michael W. Keller, Siamack A. Shirazi, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The use of solid particles as a heat transfer medium is being explored for concentrated solar power plants (CSP) to increase their efficiency by achieving operating temperature >700 °C. During operation, these hot particles are expected to move along the various components within the collector system, resulting in material degradation from a combination of high-temperature oxidation and erosion. In the present study, the performance of candidate materials was evaluated through a series of abrasion erosion experiments at room temperature as well as at 800 °C. Wear in metallic and refractory type materials was investigated using CarboBead® HSP 40/70 particles inside …

Evaluating Stem Course Re-Design Strategies In Light Of Covid-19, Ulises Juan Trujillo Garcia, Krishna Pakala, Samantha Schauer, Diana Bairaktarova, Bhaskar Chittoori

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The COVID-19 pandemic brought on unprecedented challenges to the teaching and learning communities that required faculty to make purposeful changes in their teaching approaches. Many faculty members had to shift rapidly from in-person to online mode of instruction. This study documents perceptions of STEM faculty who made the change to online teaching. It reports on what strategies faculty used to transition to remote/online teaching and how this change impacted student learning. The study results indicated that almost two-thirds of the faculty changed how they evaluated their students. Results also showed that the sudden change to remote learning negatively impacted student …

Centralized And Decentralized Optimal Control Of Variable Speed Heat Pumps, Ryan S. Montrose, John F. Gardner, Aykut C. Satici

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Utility service providers are often challenged with the synchronization of thermostatically controlled loads. Load synchronization, as a result of naturally occurring and demand-response events, has the potential to damage power distribution equipment. Because thermostatically controlled loads constitute most of the power consumed by the grid at any given time, the proper control of such devices can lead to significant energy savings and improved grid stability. The contribution of this paper is the development of an optimal control algorithm for commonly used variable speed heat pumps. By means of selective peer-to-peer communication, our control architecture allows for the regulation of home …

Lamin A/C Is Dispensable To Mechanical Repression Of Adipogenesis, Matthew Goelzer, Gunes Uzer

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Mesenchymal stem cells (MSCs) maintain the musculoskeletal system by differentiating into multiple lineages, including osteoblasts and adipocytes. Mechanical signals, including strain and low-intensity vibration (LIV), are important regulators of MSC differentiation via control exerted through the cell structure. Lamin A/C is a protein vital to the nuclear architecture that supports chromatin organization and differentiation and contributes to the mechanical integrity of the nucleus. We investigated whether lamin A/C and mechanoresponsiveness are functionally coupled during adipogenesis in MSCs. siRNA depletion of lamin A/C increased the nuclear area, height, and volume and decreased the circularity and stiffness. Lamin A/C depletion significantly decreased …

Binary Particle Mixtures As A Heat Transfer Media In Shell-And-Plate Moving Packed Bed Heat Exchangers, Chase Ellsworth Christen

Boise State University Theses and Dissertations

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in concentrated solar power (CSP) plants. The downside of such an approach is the low overall heat transfer coefficients in shell-and-plate moving packed bed heat exchangers caused by the inherently low packed bed thermal conductivity values of the low-cost solid media. Choosing the right particle size distribution of currently available solid media can make a substantial difference in packed bed thermal conductivity, and thus, a substantial difference in the overall heat transfer coefficient of shell-and-plate moving packed bed heat exchangers. Current research …

First-Principles Studies Of Nucleation Of Atomic-Layered Molybdenum Disulfide By Atomic Layer Deposition, Matthew Lawson

Boise State University Theses and Dissertations

This dissertation implements first-principles calculations to understand the nucleation mechanisms for atomic layer deposition (ALD) of molybdenum disulfide (MoS₂) using MoF₆ and H₂S precursors. ALD is a self-limiting process that can deposit a range of materials at the nanoscale, while maintaining chemical stoichiometry, atomic scale thickness control, and can conform to high-aspect ratio substrate designs. ALD is extremely sensitive to surface chemistry and morphology; therefore, it is critical to understand how these factors control deposition.

Density functional theory (DFT) was used to understand what factors can control the nucleation for ALD of MoS₂ using …

Kinematic And Kinetic Changes After Total Hip Arthroplasty During Sit-To-Stand Transfers: Systematic Review, Junsig Wang, Safeer F. Siddicky, Michael P. Dohm, C. Lowry Barnes, Erin M. Mannen

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Background: Total hip arthroplasty (THA) is a common and effective surgical procedure that allows patients with hip osteoarthritis to restore functional ability and relieve pain. Sit-to-stand transfers are common demanding tasks during activities of daily living and are performed more than 50 times per day. The purpose of this systematic review is to obtain a comprehensive understanding of biomechanical changes during sit-to-stand transfers after THA.

Methods: Relevant articles were selected through MEDLINE, Scopus, Embase, and Web of Science. Articles were included if they met the following inclusion criteria: 1) participants underwent total hip arthroplasty without restriction on the arthroplasty design, …

Data-Driven Design Of Energy-Shaping Controllers For Swing-Up Control Of Underactuated Robots, Wankun Sirichotiyakul, Aykut C. Satici

Mechanical and Biomedical Engineering Faculty Publications and Presentations

We propose a novel data-driven procedure to train a neural network for the swing-up control of underactuated robotic systems. Our approach is inspired by several recent developments ranging from nonlinear control theory to machine learning. We embed a neural network indirectly into the equations of motion of the robotic manipulator as its control input. Using familiar results from passivity-based and energy-shaping control literature, this control function is determined by the appropriate gradients of a neural network, acting as an energy-like (Lyapunov) function. We encode the task of swinging-up robotic systems through the use of transverse coordinates and goal sets; which …

In Vitro Method To Quantify And Visualize Volumetric Wear In Meniscus Subjected To Joint Loading Using A 3d Optical Scanner, Kate J. Benfield

Boise State University Theses and Dissertations

The menisci are fibrocartilaginous soft tissues that act to absorb and distribute load across the surface of the knee joint. As a result of mechanical wear and large repetitive loading, meniscus tissue can begin to breakdown, or degenerate. Meniscus degeneration increases the risk of tearing, weakened tissue integrity, and the progression of osteoarthritis. Therefore, it is imperative to understand the wear behavior of whole human meniscus to identify conditions that may significantly increase the risk of degeneration.

The objective of this study is to develop and validate an in vitro methodology for characterizing volumetric wear behavior in whole human meniscus …

Direct Solar Absorption Nanoparticle Doped Membranes For A Hybrid Membrane Distillation And Photovoltaic Cell, Alejandro Espejo Sanchez

Boise State University Theses and Dissertations

The growing demand for clean water supplies is driving the need for an innovative approach of water desalination. Developing a method for treating water with high salinities is possible with membrane distillation (MD). Additionally, MD is very attractive for pairing with solar energy due to the low temperature requirements. The integration of a membrane distillation system with a photovoltaic (PV) system will result in the co-production of electricity and clean water, thereby improving the economics of MD. Such a hybrid system will directly absorb thermal energy in the membrane for desalination while taking advantage of the spectrally selective nature of …

Heat Transfer Modeling And Optimization Of A Carbonized Microvascular Solar Receiver, Taylor Brown

Boise State University Theses and Dissertations

Concentrating solar power is an emerging renewable energy source. The technology can collect and store thermal energy from the sun over long durations, generating electricity as needed at a later time. Current CSP systems are limited to a maximum operational temperature due to constraints of the working fluid, which limits the maximum possible efficiency of the system. One proposed pathway forward is to utilize a gas phase for the working fluid in the system such as supercritical carbon dioxide.

A composite gas phase modular receiver is being developed by researchers at Boise State University and the University of Tulsa. The …

Constitutive Modeling Of Force-Controlled Fatigue Testing In Human Meniscus Tissue, Bradley Scott Henderson

Boise State University Theses and Dissertations

The meniscus is a wedge-shaped fibrocartilaginous tissue located between the femur and tibia that helps stabilize the knee and protect the underlying cartilage. There are 2.5 million reported knee injuries each year, making it the most injured joint in the human body. Nearly twenty percent of these injuries are due to a torn meniscus, leading to over half a million meniscus surgeries performed in the United States annually. Therefore, it is critical to understand the failure modes of meniscus tissue to prevent these debilitating injuries. A failure mode that accounts for one-third of all meniscus injuries is repeated exposure to …

Large Displacement J-Integral Double Cantilever Beam (Dcb) Test Method For Mode I Fracture Toughness, Joshua Gunderson

Boise State University Theses and Dissertations

The J-integral is used to develop an alternative double cantilever beam (DCB) test method for the Mode I fracture toughness suitable for both small and large displacements. The current focus is the experimental determination of the Mode I interlaminar fracture toughness of composite materials, but the method is generally applicable to other similar tests and material systems, such as to the Mode I fracture toughness of adhesives. A series of five identical specimens are tested to compare the linear-elastic fracture mechanics method recommended by ASTM, which makes use of linear beam theory with root rotation, large displacement, and end …

Low-Intensity Vibration Restores Nuclear Yap Levels And Acute Yap Nuclear Shuttling In Mesenchymal Stem Cells Subjected To Simulated Microgravity, Matthew Thompson, Kali Woods, Joshua Newberg, Julia Thom Oxford, Gunes Uzer

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Reducing the musculoskeletal deterioration that astronauts experience in microgravity requires countermeasures that can improve the effectiveness of otherwise rigorous and time-expensive exercise regimens in space. The ability of low-intensity vibrations (LIV) to activate force-responsive signaling pathways in cells suggests LIV as a potential countermeasure to improve cell responsiveness to subsequent mechanical challenge. Mechanoresponse of mesenchymal stem cells (MSC), which maintain bone-making osteoblasts, is in part controlled by the “mechanotransducer” protein YAP (Yes-associated protein), which is shuttled into the nucleus in response to cyto-mechanical forces. Here, using YAP nuclear shuttling as a measurement outcome, we tested the effect of 72 h …

Annual Simulation Of Photovoltaic Retrofits Within Existing Parabolic Trough Concentrating Solar Powerplants, Nipun Goel, Hannah O'Hern, Matthew Orosz, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Solar power for electricity production comes from either photovoltaics or concentrating solar power plants. The former has seen rapid growth and expansion due to the rapid fall in global prices, while the latter has seen moderate growth due to ability to cheaply store thermal energy for later use. Hybridization, or combining photovoltaics with concentrating solar power represents a potential way for lowering cost while enabling long term storage. Over 5 GW of capacity exist worldwide using parabolic trough style technology for concentrating solar power which presents a unique option for optimization in the form of a photovoltaic retrofit. While it …

Emerging Gene-Editing Modalities For Osteoarthritis, Alekya S. Tanikella, Makenna J. Hardy, Stephanie M. Frahs, Aidan G. Cormier, Kalin D. Gibbons, Clare K. Fitzpatrick, Julia Thom Oxford

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Osteoarthritis (OA) is a pathological degenerative condition of the joints that is widely prevalent worldwide, resulting in significant pain, disability, and impaired quality of life. The diverse etiology and pathogenesis of OA can explain the paucity of viable preventive and disease-modifying strategies to counter it. Advances in genome-editing techniques may improve disease-modifying solutions by addressing inherited predisposing risk factors and the activity of inflammatory modulators. Recent progress on technologies such as CRISPR/Cas9 and cell-based genome-editing therapies targeting the genetic and epigenetic alternations in OA offer promising avenues for early diagnosis and the development of personalized therapies. The purpose of this …

Multiphysics Finite Element Analysis Of In-Pile Sensors For Advanced Nuclear Reactors, Takoda Linn Bingham

Boise State University Theses and Dissertations

Nuclear reactors have large needs for in-pile sensors that are durable in high temperature, radioactive, and corrosive environments. With the use of multiphysics finite element analysis (FEA) researchers can speed up sensor prototyping. FEA also allows for a better fundamental understanding of sensors and enables sensor optimization. This research focuses on three types of in-pile sensors developed at Idaho National Laboratory: acoustic sensors, linear variable differential transformers (LVDT), and capacitance based strain gauges (CSG). Two acoustic sensors, magnetostrictive waveguides and piezoelectric surface acoustic wave (SAW) sensors were first modeled. These models showed the acoustic wave patterns and estimated the speed …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …

Faculty Perspectives On The Impact Of Virtual Office Hours In Engineering Courses, Brooke-Lynn Caprice Andrade, Krishna Pakala, Diana Bairaktarova, Douglas Hagemeier, Harish Subbaraman

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Instructor-student interaction is an important element of a course design, but office hours can be challenging to attend based on students’ commitments. They have time and space limitations that prevent students from getting the help they need and often garner poor attendance. Virtual office hours can address issues related to low attendance and provide a low stakes environment where unhindered learning can happen. Virtual office hours are flexible, yield productive interactions, and all enrolled students can participate. This study reports on three engineering instructors’ perspectives on the efficacy of virtual office hours compared to the traditional face-to-face interactions with the …

Simulation Of Cu Precipitation In Fe-Cu Dilute Alloys With Cluster Mobility, Senlin Cui, Mahmood Mamivand, Dane Morgan

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Cu-rich precipitates formation is associated with the precipitation hardening of Fe-Cu based steels and the embrittlement of reactor pressure vessel steels under neutron irradiation. The accurate modeling of the time evolution of Cu-rich precipitates is therefore of fundamental importance for the design of Fe-Cu based steels and the prediction of the irradiation induced shift of the ductile to brittle transition temperature of reactor pressure vessels. This work applies cluster dynamics with mobile Cu monomers and clusters to model Cu precipitation in dilute Fe-Cu alloys at several temperatures. Optimized model parameters can be used to simulate the mean radius, number density, …

Heating Performance Analysis For Short-Term Energy Monitoring And Prediction Using Multi-Family Residential Energy Consumption Data, Sukjoon Oh, Chul Kim, Joonghyeok Heo, Sung Lok Do, Kee Han Kim

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Many smart apartments and renovated residential buildings have installed Smart Meters (SMs), which collect interval data to accelerate more efficient energy management in multi-family residential buildings. SMs are widely used for electricity, but many utility companies have been working on systems for natural gas and water monitoring to be included in SMs. In this study, we analyze heating energy use data obtained from SMs for short-term monitoring and annual predictions using change-point models for the coefficient checking method. It was found that 9-month periods were required to search the best short-term heating energy monitoring periods when non-weather-related and weather-related heating …

Concentrating Photovoltaic Retrofit For Existing Parabolic Trough Solar Collectors: Design, Experiments, And Levelized Cost Of Electricity, Todd P. Otanicar, Rhetta Wingert, Matthew Orosz, Clay Mcpheeters

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Photovoltaics and concentrating solar thermal power are two ways for generating electricity from sunlight, albeit through different methods. Parabolic trough style powerplants represent 3.6 GW of electricity production, but many of these plants are aging and being replaced with photovoltaics. An alternative option that could be employed to leverage the sunk capital cost associated with the primary optics would be the design of a pure photovoltaic retrofit working within the existing plant architecture. Here, a secondary optical concentrator is designed to use the existing primary optics of a parabolic trough type solar thermal powerplant. The design is a v-shaped secondary …

Computational Approach To Correcting Joint Instability In Patients With Recurrent Patellar Dislocation, Oliver Alvarez, Robert N. Steensen, Paul J. Rullkoetter, Clare K. Fitzpatrick

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Patellar dislocation is a debilitating injury common in active adolescents and young adults. Conservative treatment after initial dislocation is often recommended, but almost half of these patients continue to suffer from recurrent dislocation. The objective of this study was to compare preoperative patellofemoral joint stability with stability after a series of simulated procedures, including restorative surgery to correct to pre-injury state, generic tibial tubercle osteotomy, patient-specific reconstructive surgery to correct anatomic abnormality, less invasive patient-specific surgery, and equivalent healthy controls. Three-dimensional, subject-specific finite element models of the patellofemoral joint were developed for 28 patients with recurrent patellar dislocation. A …

Review Of Living Learning Communities And Their Impact On First Year Engineering College Students, Samantha Schauer, Krishna Pakala, Kim M.B. Tucker

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Traditionally, first-year college students do not have a community of like-minded peers with whom they are able to learn. Adding to first-year engineering college students’ (FYECS) struggles is the fact that many students do not have a mentor in their related field and are unable to start building their professional repertoire, network, and/or practical skills. Living Learning Communities (LLC) can offer a platform for postsecondary institutions to increase recruitment, engagement, and sense of belonging for students who live in an LLC. LLCs have been described in the literature as themed living and learning communities where students take a common course(s), …

Fuzzy Controller Algorithm For Automated Hvac Control, M. Chae, K. Kang, D. Koo, S. Oh, Jae Youl Chun

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This research presents the design framework of the artificial intelligent algorithm for an automated building management system. The AI system uses wireless sensor data or IoT (Internet of Things) and user's feedback together. The wireless sensors collect data such as temperature (indoor and outdoor), humidity, light, user occupancy of the facility, and Volatile Organic Compounds (VOC) which is known as the source of the Sick Building Syndrome (SBS) or New Building Syndrome because VOC are often found in new buildings or old buildings with new interior improvement and they can be controlled and reduced by appropriate ventilation efforts. The collected …

A Mobile Learning Community In A Living Learning Community: Perceived Impact On Digital Fluency And Communication, Devshikha Bose, Krishna Pakala, Lana Grover

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Though mobile devices like smartphones, tablets, and tablet computers have an immense potential for improving student learning, there is little empirical research which reports ways in which students actually use these technologies for learning, especially in fields like Engineering. Based on a social-constructivist approach to learning, the purpose of this mixed methods study was to investigate student perceptions regarding changes in mobile device based digital fluency and communication, after participation in a Living Learning Community (LLC) based Mobile Learning Community. This study contributes to existing literature in the field in that it reports student perceptions of how mobile devices can …

Isolated Nucleus Stiffens In Response To Low Intensity Vibration, Joshua Newberg

Boise State University Theses and Dissertations

The nucleus, central to all cellular activity, relies on both direct mechanical input and its molecular transducers to sense and respond to external mechanical stimuli. This response occurs by regulating intra-nuclear organization that ultimately determines gene expression to control cell function and fate. It has long been known that signals propagate from an extracellular environment to the cytoskeleton and into nucleus (outside-in signaling) to regulate cell behavior. Emerging evidence, however, shows that both the cytoskeleton and the nucleus have inherent abilities to sense and adapt to mechanical force, independent of each other. While it has been shown that isolated nuclei …

Dynamic Modeling Of A Suspended And Shock Isolated System In Seismic Loading, Emilie Murphy

Boise State University Theses and Dissertations

A dynamic model for a suspended and shock isolated system is derived and implemented in MATLAB’s Simulink software. The purpose of this implementation is to create a design tool which is modularized to be able to accommodate any configuration of a similar system in any kind of loading. The design tool is used to compute the level of acceleration experienced at specific points in space within the system in the presence of seismic events, as typified by the dynamic displacement caused by the Sumatra, Indonesia earthquake of 2007. It is determined that under this 8.4 magnitude earthquake, accelerations within the …