Mechanical Engineering Commons^™

Complicating Factors In Hydraulic Jumps: The Effects Of Earth's Rotation, Muveno Pascoal Elias Mucaza

Electronic Thesis and Dissertation Repository

Hydraulic jumps at the interface of stratified rotating fluids are studied. The flow is de- fined with continuous density and velocity profiles, with the velocity in each layer changing (upstream shear). The study is conducted in jumps defined by an imposed velocity transition, and jumps developing over a topography.

The numerical simulations conducted showed the qualitative structure of the flow changing in the cross-width direction, as well as the size and amount of turbulence of the jumps. Mixing in these jumps was shown to increase towards the side of the domain where the jumps were larger and more turbulent. The …

Characterization For Spray Droplet Behaviour In Afterburner-Like Flow Conditions, Matthew D. Mahaffy

Electronic Thesis and Dissertation Repository

Fuel injection processes can contribute to combustion instability in highly energetic combustion systems. In gas turbine engine afterburners, jet-in-crossflow (JIX) injection is used. Part one of the thesis study investigates the interaction between spray droplets and turbulent flow properties of a JIX. Jet-in-counterflow (JIC) configuration was also investigated. Part two of the investigation examined the behaviour of JIX droplets around a bluff body. Droplet size and flow turbulence was characterized simultaneously using particle image velocimetry and image processing techniques. Turbulence and droplet size were correlated, particularly at momentum flux ratios ≥ 60. High speed imaging was used to identify droplet …

Validation Of Rhocentralfoam For Engineering Applications Of Under-Expanded Impinging Free Jets, Peter Nielsen

Electronic Thesis and Dissertation Repository

A numerical validation study of under-expanded impinging jet is conducted using OpenFOAM, an open-source computational fluid dynamics (CFD) library. RhoCentralFoam, a density based, compressible flow solver with a two-equation shear stress transport (SST) turbulence model is used on an axisymmetric model to reduce the computation cost. Major features of the flow were compared to an experimental study by Henderson et al., with a nozzle pressure ratio (NPR) of 4.0 and nozzle to plate spacing between 1.65-4.16. Of the features measured, the Mach diamond spacing, super-sonic core, and shear layer are all accurately predicted, while the recirculation bubble in the impingement …

Transient Analysis Of Full Scale And Experimental Downburst Flows, Junayed Chowdhury

Electronic Thesis and Dissertation Repository

Downbursts are highly transient natural phenomena which produce strong downdrafts evolving from a cumulonimbus cloud They induce an outburst of damaging winds on or near to the ground causing an immense damage to the ground mounted structures and aircrafts. This study investigates the transient nature of downbursts using wind speed records from full scale downburst events employing an objective methodology. This method can detect the abrupt change points in a downburst time series based on statistical parameters such as mean, standard deviation and linear trend. In addition to the analysis of the full scale downburst events, several large scale experimental …

On The Reduction Of The Driving Force In Shear-Driven Flows, Sakib Shadman

Electronic Thesis and Dissertation Repository

In shear-driven flows, an external driving force is needed to maintain the relative movement of horizontal plates. This thesis presents a systematic analysis on using spatially periodic heating and grooved surfaces to control this force. It is found that the use of periodic heating creates a buoyancy-driven effect that always reduces this force. The use of proper heating may even lead to the complete elimination of this force. It is further found that the use of isothermal grooved surfaces always enhances flow resistance, resulting in an increase of this force. When grooves and heating are applied together, their interaction induces …

A Numerical Investigation Of Human Cough Jet Development And Droplet Dispersion, Ran Bi

Electronic Thesis and Dissertation Repository

As part of the Western Cold and Flu aerosol (WeCoF) studies, the present study provides Computational Fluid Dynamics (CFD) modelling of human cough flow. The cough flow is characterized in two different aspects, the flow field and the droplets. In the study of the flow field of coughing, various dynamic characteristics, including the velocity variation, streamwise penetration and power spectral density, are examined. CFD simulations using two different approaches, the unsteady Reynolds Averaged Navier-Stokes (URANS) and the large eddy simulation (LES), are performed for comparison purposes. The numerical results are validated by the experimental data obtained from the measurements by …

Hybrid Attitude Control And Estimation On So(3), Soulaimane Berkane

Electronic Thesis and Dissertation Repository

This thesis presents a general framework for hybrid attitude control and estimation design on the Special Orthogonal group SO(3). First, the attitude stabilization problem on SO(3) is considered. It is shown that, using a min-switch hybrid control strategy designed from a family of potential functions on SO(3), global exponential stabilization on SO(3) can be achieved when this family of potential functions satisfies certain properties. Then, a systematic methodology to construct these potential functions is developed. The proposed hybrid control technique is applied to the attitude tracking problem for rigid body systems. A smoothing mechanism is proposed to filter out the …

Numerical Investigation Of Full Scale Thunderstorm Downbursts: A Parametric Study And Comparison To Meteorological Model, Christopher Oreskovic

Electronic Thesis and Dissertation Repository

A series of Large Eddy Simulations using an atmospheric meteorological cloud model have been used to investigate the important geometric and thermal parameters that influence a thunderstorm downburst outflow, as it pertains specifically to the idealized cooling source model. A separate set of Large Eddy Simulations make use of the same idealized cooling source model, in a realistic atmospheric base state using real field sounding data, in an attempt to make a quantifiable comparison to a downburst from a full cloud simulation. Randomness has been added to the cooling source forcing function to mimic the thermal variation in a real …

Wind And Thermal Effects On Ground Mounted Photovoltaic (Pv) Panels, Chowdhury Mohammad Jubayer

Electronic Thesis and Dissertation Repository

A combination of Computational Fluid Dynamics (CFD) simulations and wind tunnel experiments are carried out to investigate the effects of wind on the aerodynamic loading and heat transfer of a ground mounted stand-alone photovoltaic (PV) panel with tilt angle of 25^o in open country atmospheric boundary layer. Several azimuthal wind directions are considered: Southern 0^o, Southwest 45^o, Northwest 135^o and Northern 180^o. Three dimensional Reynolds-Averaged Navier-Stokes (RANS) approaches with an unsteady solver using Shear Stress Transport (SST) k-ω turbulence closure are employed for the CFD simulations, whereas Particle Image Velocimetry (PIV) and …

Structural Response Analyses Of Piezoelectric Composites Using Nurbs, Vijairaj Raj

Electronic Thesis and Dissertation Repository

Variational method deduced on the basis of the minimum potential energy is an efficient method to find solutions for complex engineering problems. In structural mechanics, the potential energy comprises strain energy, kinetic energy and the work done by external actions. To obtain these, the displacement are required as a priori. This research is concerned with the development of a numerical method based on variational principles to analyze piezoelectric composite plates and solids. A Non-Uniform Rational B-Spline (NURBS) function is used for describing both the geometry and electromechanical displacement fields. Two dimensional plate models are formulated according to the first order …

Experimental Investigation Of Wind Effect On Solar Panels, Ayodeji Abiola-Ogedengbe

Electronic Thesis and Dissertation Repository

Photovoltaic Solar Panels for electricity generation are outdoor low-rise structures that are vulnerable to damage by the wind. The existing building codes do not contain information about the impact of the wind on these structures and hence do not provide comprehensive guidelines to mitigate such impact. The present study is a contribution to the ongoing efforts to codify the wind loading on solar panels. In this study, experimental investigations were conducted on the scaled model of a ground-mounted solar panel structure whose surface is geometrically similar to an inclined flat plate and mounted on three-legged support. The panel comprises of …

Vortex Shedding From Elongated Bluff Bodies, Zachary J. Taylor

Electronic Thesis and Dissertation Repository

As the spans of suspension bridges increase, the structures become inherently flexible. The flexibility of these structures, combined with the wind and particular aerodynamics, can lead to significant motions. From the collapse due to flutter of the Tacoma Narrows Bridge to the case of vortex-induced vibrations (VIV) of the Storebælt Bridge, it is evident that a better understanding of the aerodynamics of these geometries is necessary. The work herein is motivated by these two problems and is presented in two parts.

In the first part, the focus is on the physical mechanisms of vortex shedding. It is shown that the …