Other Materials Science and Engineering Commons^™

Novel Fission Track Detection For Identification And Characterization Of Special Nuclear Materials, Jonathan Allen Gill

Doctoral Dissertations

Fission track detection and analysis is used primarily in nuclear safeguards to identify special nuclear material. Identification of isotopic ratios is a crucial step in understanding the intended use of nuclear material and the nature of the materials production cycle. Unfortunately, this methodology uses etchable track detectors that require significant expertise and intensive labor to process.

This study developed a novel method using lithium fluoride (LiF) as a fluorescing nuclear track detector to conduct fission track analysis for isotopic prediction of uranium enrichment. Individual latent tracks produced by fission products were observed in LiF for the first time. These tracks …

Effects Of The Internal Magnetic Field On The Magneto-Mechanical Properties Of Magnetic Shape Memory Alloys, Anthony Hobza

Boise State University Theses and Dissertations

Shape memory alloys are a class of functional material which recover from large strains without permanent deformation. The strain is accommodated by the displacement of twin boundaries in the martensite phase. The shape memory alloy Ni-Mn-Ga is also ferromagnetic. Ni-Mn-Ga preferentially magnetizes along a certain crystallographic axis. This direction of easy magnetization changes across twin boundaries, such that the directions in neighboring twin domains are nearly perpendicular.

The interaction of magnetic moments and interfaces including the crystal surface and twin boundary interfaces has a large role in the magnetization process of the material. The goal of this study is to …

Thermodynamics And Kinetics Of Dna Origami Cross-Tile Array Formation, Brett Michael Ward

Boise State University Theses and Dissertations

As the cost to continue scaling photolithography to pattern smaller semiconducting devices increases exponentially, new materials and fabrication approaches are being sought to extend and enhance current capabilities. DNA nanostructures have been identified as a promising material for patterning nanoscale devices, and several studies have demonstrated the ability to program DNA nanostructures to self-assemble into large scale arrays. These DNA arrays can be designed to create the patterns necessary for fabricating semiconductor device features. However, these structures are far from ideal and contain a number of defects that limit the adoption of this approach for manufacturing. In order to create …

Design, Analysis, And Application Of A Cellular Material/Structure Model For Metal Based Additive Manufacturing Process., Shanshan Zhang

Electronic Theses and Dissertations

Powder bed fusion additive manufacturing (PBF-AM) has been broadly utilized to fabricate lightweight cellular structures, which have promising potentials in many engineering applications such as biomedical prosthesis, aerospace, and architectural structures due to their high performance-to-weight ratios and unique property tailorabilities. To date, there is still a lack of adequate understanding of how the cellular materials are influenced by both the geometry designs and process parameters, which significantly hinders the effective design of cellular structures fabricated by PBF-AM for critical applications. This study aims to demonstrate a cellular structure design methodology that integrates geometrical design and process-material property designs. Utilizing …

A Study Of Manganese And Cobalt Incorporated Nickel Oxide Based Core-Shell Magnetic Nanoparticles, Samiul Hasan

MSU Graduate Theses

The synthesis along with the structural and magnetic properties of manganese (Mn) and cobalt (Co) -incorporated nickel oxide (NiO) inverted core-shell nanoparticles (CSNs) were investigated. The primary objective of this study was to determine the effect of substitution of nickel (Ni) by transition metal ions (Mn²⁺/Co²⁺) in affecting the magnetic properties of the resultant CSNs. The core of the CSNs is comprised of NiO and the shell constitutes a Ni_x(Mn/Co)_1-xO phase. The synthesis of the CSNs was accomplished in two steps: first, NiO nanoparticles were synthesized using a thermal decomposition method. In …

Investigating Scalable Manufacturing Of High-Conductivity Wires And Coatings From Ultra-Long Carbon Nanotubes, Pouria Khanbolouki

Mechanical Engineering ETDs

Carbon nanotubes (CNTs) are a promising candidate for next generation of electrical wirings and electromagnetic interference (EMI) shielding materials due to their exceptional mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can potentially replace current conductors in many industries including aerospace, automotive, gas and oil.

This thesis investigates a new manufacturing approach, based on conventional solution coating and wire drawing methods, to fabricate high conductivity wires and coatings from ultra-long carbon nanotubes. …

Computational Studies Of Structure–Function Relationships Of Supported And Unsupported Metal Nanoclusters, Hongbo Shi

Doctoral Dissertations

Fuel cells have been demonstrated to be promising power generation devices to address the current global energy and environmental challenges. One of the many barriers to commercialization is the cost of precious catalysts needed to achieve sufficient power output. Platinum-based materials play an important role as electrocatalysts in energy conversion technologies. In order to improve catalytic efficiency and facilitate rational design and development of new catalysts, structure–function relationships that underpin catalytic activity must be understood at a fundamental level. First, we present a systematic analysis of CO adsorption on Pt nanoclusters in the 0.2-1.5 nm size range with the aim …

Development Of Nanomaterials For Lithium-Ion Batteries By Atomic Layer Deposition, Biqiong Wang

Electronic Thesis and Dissertation Repository

Lithium ion batteries (LIBs) have been the dominant candidate in the field of energy storage. The ever-growing demand of high energy and power density, longer battery life, and more assured safety level has geared the development of LIBs towards all-solid-state batteries (ASSBs). The solid-state nature allows more flexibility in battery design and higher area capacity to be obtained within limited space. Moreover, replacing liquid electrolytes with solid-state electrolytes (SSEs) is a most effective approach to achieve safer battery system. In addition, ASSBs hold great promise in the actual fabrication of microbatteries for microelectronics. Therefore, a technique which can synthesize materials …

Development Of High-Performance Carbon And Phosphorus Anode Materials For Sodium-Ion Batteries, Wei Xiao

Electronic Thesis and Dissertation Repository

Abstract

Lithium-ion batteries, as dominant power sources for prevailing consumer electronics and electric vehicles, have been plagued by limited lithium resources with the soaring prices. Sodium-ion batteries, benefitted from ubiquitous and inexpensive sodium resources without toxicity and pollution, have emerged as promising alternatives for large-scale applications. Considering their kinetic challenges and disadvantageous energy densities, it is urgently necessary to pursue high-performance electrode materials to remedy these intrinsic defects. For anode materials, the primary choices of sodium metal and graphite are correspondingly denied for safety issues and intercalation incapability. Therefore, the objective for this doctoral work is to develop high-performance anode …

3d Printing Of Functional Materials: Surface Technology And Structural Optimization, Dongxing Zhang

Electronic Thesis and Dissertation Repository

There has been a surge in interest of 3D printing technology in the recent 5 years with respect to the equipment and materials, because this technology allows one to create sophisticated and customized parts in a manner that is more efficient regarding both material and time consumption. However, 3D printing has not yet become a mainstream technology within the established manufacturing routes. One primary factor accounting for this slow progress is the lack of a broad variety of 3D printable materials, resulting in limited functions of 3D printed parts.

To bridge this gap, I present an integrated strategy to fabricate …

Fabrication And Characterization Of Hybrid Nanocomposites By Matrix Assisted Pulsed Laser Evaporation, Songlin Yang

Electronic Thesis and Dissertation Repository

Different methods have been applied to deposit hybrid nanocomposites which can be applied in various fields due to their light weight and multifunctional properties. Here, matrix assisted pulsed laser evaporation (MAPLE) equipment with 532 nm Nd:YAG laser is applied to fabricate three types of hybrid nanocomposites on different substrates.

Chemical synthesized FeCo nanoparticles were deposited on graphene sheets by MAPLE technique (laser fluence: 300 mJ/cm²). The effects of deposition time (t) on particle amount, shape and size have been investigated. Yttrium barium copper oxide (YBCO) materials are one type of high-temperature superconductive materials and …

Correlating Long-Term Lithium Ion Battery Performance With Solid Electrolyte Interphase (Sei) Layer Properties, Seong Jin An

Doctoral Dissertations

This study was conducted to understand effects of some of key factors (i.e., anode surface properties, formation cycling conditions, and electrolyte conditions) on solid electrolyte interphase (SEI) formation in lithium ion batteries (LIBs) and the battery cycle life. The SEI layer passivates electrode surfaces and prevents electron transfer and electrolyte diffusion through it while allowing lithium ion diffusion, which is essential for stable reversible capacities. It also influences initial capacity loss, self-discharge, cycle life, rate capability and safety. Thus, SEI layer formation and electrochemical stability are primary topics in LIB development. This research involves experiments and discussions on key factors …

The Mechanism Of Radiation-Induced Nanocluster Evolution In Oxide Dispersion Strengthened And Ferritic-Martensitic Alloys, Matthew John Swenson

Boise State University Theses and Dissertations

The objective of this study is to evaluate the mechanism of irradiation-induced nanoparticle evolution in a model Fe-9%Cr oxide dispersion strengthened steel and commercial ferritic-martensitic alloys HCM12A and HT9. Each alloy is irradiated with Fe²⁺ ions, protons, or neutrons to doses ranging from 1-100 displacements per atoms at 500°C. The morphology of nanoclusters are characterized using atom probe tomography. The evolution of clusters in each alloy are notably different with each irradiating particle, and the competing effects of ballistic dissolution and radiation-enhanced, diffusion-driven growth are attributed to the respective differences in cluster evolution. A phase evolution model, originally theorized …

Graphite And Graphene-Oxide Based Pgm-Free Model Catalysts For The Oxygen Reduction Reaction, Joseph Henry Dumont

Nanoscience and Microsystems ETDs

The world currently relies heavily on fossil fuels such as coal, oil, and natural gas for its energy. Fossil fuels are non-renewable, that is, they draw on finite resources that will eventually dwindle, becoming too expensive or too environmentally damaging to retrieve. One alternative source of energy are fuel cells, electrochemical devices that convert chemical energy to cleanly and efficiently produce electricity. They can be used in a wide range of applications, including transportation, stationary, portable and emergency power sources. Their development has been slowed by the high cost of PGM electrocatalysts needed at both electrodes as well as sluggish …

Comparison Of Intrusive And Non-Intrusive Methods For Corrosion Monitoring Of Fuel Processing Systems, Armando Jacob Espinoza, Thomas Conner Field

Materials Engineering

This presentation contains an assessment of the best overall corrosion monitoring device, intrusive or non-intrusive, for use in the petrochemical industry. Corrosion in the petrochemical industry is a large issue because it causes a deterioration of pipe integrity in fuel processing systems. A reduction of pipe wall integrity due to corrosion could result in a leak or an explosion of fuel processing lines since those systems function at high pressures. The use of corrosion monitoring systems in the petrochemical industry helps to detect early signs of corrosion prior to failure so that proper maintenance can be performed to prevent catastrophe. …

Effect Of Composition And Build Direction On Additively Manufactured Hastelloy X Alloys, Justin A. Spitzer, Jeffrey T. Schloetter, Sarah Zerga

Materials Engineering

Microcracking has caused premature failure and reduction in properties in additively manufactured (AM) Hastelloy X. The purpose of this research is to meet or exceed the mechanical properties of wrought Hastelloy X by modifying the composition and build direction of Hastelloy X manufactured using Direct Metal Deposition (DMD). Tensile testing, scanning electron microscopy (SEM), and metallography were performed on the samples. ANOVA was used to analyze the dependence that the properties had on build direction and composition. The nominal composition wrought samples had a yield strength of 310.1 MPa and a 60.79% Elongation. Alloy P60-X18 in a horizontal build had …

Inkjet Printing Of Nano-Silver Conductive Ink On Pet Substrate, Skyler Jiang

Materials Engineering

Printing of conductive ink traditionally uses copper-based ink and was used on high temperature metal substrates due to the high curing and sintering temperature of copper. In this experiment, however, Metalon JS-B25P nano-silver conductive ink was printed using an Epson Stylus C88+ inkjet printer on polyethylene terephthalate (PET) based Novele printing media made for low temperature applications. With silver’s lower sintering temperature, the nano-silver particles in this ink are desired to be able to sinter at a low enough temperature to be used on the PET substrate. The printed ink traces were cured with a temperature-controlled hotplate at 100℃, 120℃, …

Investigation Of A Method To Determine Mechanical Properties Of Integral Composite Hinges For Application In Foldable Skis, Jada Evers, Kathryn Johnson

Materials Engineering

No abstract provided.

Characterization Of Slm Printed 316l Stainless Steel And Investigation Of Microlattice Geometry, Finley H. Marbury

Materials Engineering

The goal of this project was firstly to characterize Cal Poly’s SLM printed 316L stainless steel. SEM analysis showed Cal Poly’s as-printed 316L material to have a cellular dendritic microstructure containing mostly austenite and a small amount of δ-ferrite. After being heat treated to eliminate warp, its yeild and ultimate tensile strength were on par with the literature, however higher modulus and lower elongation were observed. XRD analysis confirmed residual stresses in the material, and that grains are preferentially oriented in both heat treated and non heat treated samples. The amount of porosity in the material was found to be …

Invariant-Based Method For Improving Efficiency Of Mechanical Testing In Aerospace Certification Of Carbon Fiber-Epoxy Composites, Alyssa Rina Gruezo, Erika Gabrielle Hansen

Materials Engineering

The current challenge with qualification of carbon fiber composites in the aerospace industry would be the low efficiency of testing hundreds of samples. The Trace Theory strives to streamline the qualification process by utilizing a material’s Trace to predict properties of composites using Excel programs and basis data. To test this theory, predicted properties from the program, QuickLam, were compared to experimental data. Unidirectional 0° (T1), unidirectional 90° (T2), quasi-isotropic (T3), and hard quasi-isotropic (T4) laminates were made using HexTowR carbon fiber and TC250 resin provided by TenCate Advanced Composites. Tensile and compression tests were done according to ASTM D3039 …

Mitigation Of Corrosion Under Insulation (Cui) Of Carbon Steel Of Different Insulating Materials: A Literature Review And Testing Analysis, Michael Alexander Lowes

Materials Engineering

Equipment often found in refineries may be enveloped in insulation and weathering jackets to maintain internal processing temperatures. In many cases moisture from the environment will penetrate the weathering jacket and infiltrate the insulation, leaching corrosive ions to the surface of metal equipment, effectively creating a corrosion cell. The goal of this project is to investigate different insulating materials for their ability to inhibit corrosion under insulation (CUI). The inhibiting mechanism utilizes water ingress that leaches ions from the insulator to bond with the surface metal and create a passive layer, inhibiting any further corrosion. This study will follow ASTM …

An Experimental And Numerical Study Of Nanomechanical Behavior Of Hard/Soft Multilayered Coatings, Benigno Sandoval

Mechanical Engineering ETDs

Multilayer thin film composites, sometimes referred to as nanolaminates, have emerged as an important subset of materials with novel, and often tunable, properties such as high strength, high toughness, and resistance to wear or corrosion. Often fabricated using alternating layers of two or more materials, these multilayer thin film coatings are typically expensive and time intensive to fabricate and characterize and exhibit novel responses to nanomechanical testing such as plasticity during unloading. This thesis explores the nanoindentation response of hard/soft multilayer coatings through examination of the optical coating Al/SiC and similar coating Al/SiO2. Instrumented indentation was used to study single …

Excitations Of Quasi-Particles In Nanostructured Systems, Jingxuan Ge

Doctoral Dissertations

The excitation of quasiparticles, like the investigated excitons and plasmons here, are the optically most prominent responses of materials. In nanostructured system, the sample quality is crucial for quantitative investigations of these optical excitations. We used electron beam evaporation, nano-second laser dewetting, and electron metalorganic chemical vapor deposition techniques to prepare well-defined and “clean” transmission electron microscopy (TEM) samples. Electron energy-loss microscopy (EELS) performed in STEM mode was employed to investigate the structural and electro-optical properties. Quantifit software was used to analyze the EELS spectra quantitatively in terms of inelastic scattering probability, energy and lifetime.

We found that the ferroplasmon …

Surface Energy In Bond-Counting Models On Bravais And Non-Bravais Lattices, Tim Ryan Krumwiede

Doctoral Dissertations

Continuum models in computational material science require the choice of a surface energy function, based on properties of the material of interest. This work shows how to use atomistic bond-counting models and crystal geometry to inform this choice. We will examine some of the difficulties that arise in the comparison between these models due to differing types of truncation. New crystal geometry methods are required when considering materials with non-Bravais lattice structure, resulting in a multi-valued surface energy. These methods will then be presented in the context of the two-dimensional material graphene in a way that correctly predicts its equilibrium …

Development And Degradation Analysis Of Novel Micro And Nanostructured Transition Metal Oxide (Tmo) Anodes For Aqueous Sodium Ion Batteries., Santanu Mukherjee

Electronic Theses and Dissertations

One of the primary motivations driving battery technology research is the need to develop cleaner and more efficient energy storage systems. The portable electronics industry has developed exponentially, especially over the last couple of decades and therefore the importance of efficient electrochemical energy storage systems cannot be overstated. Li-ion batteries have been the predominant rechargeable energy in use, however, they have their own particular drawbacks viz. flammability of the electrolyte, expensive mining of the Li metal etc. This is where the importance of Na-ion batteries lie. This research focuses on using existing transition metal oxides (TMOs) and tuning their crystal …

Data Driven Discovery Of Materials Properties., Fadoua Khmaissia

Electronic Theses and Dissertations

The high pace of nowadays industrial evolution is creating an urgent need to design new cost efficient materials that can satisfy both current and future demands. However, with the increase of structural and functional complexity of materials, the ability to rationally design new materials with a precise set of properties has become increasingly challenging. This basic observation has triggered the idea of applying machine learning techniques in the field, which was further encouraged by the launch of the Materials Genome Initiative (MGI) by the US government since 2011. In this work, we present a novel approach to apply machine learning …

Technical Feasibility Of Selectively Separating Rare Earth Elements By Vapor Phase Extraction And Condensation, Katie Lyons

Graduate Theses & Non-Theses

Experiments were performed to evaluate the technical feasibility of selectively separating selected rare earth halides (bromides and chlorides) using a volatilization and condensation technique. Initially, optimum chloridizing and bromidizing roast parameters were secured in studies performed on reagent grade rare earth oxide samples and subsequently confirmed in tests performed on mineral ore and concentrate samples. The volatilization and condensation experiments were performed by placing the subject rare earth halide samples in an argon-purged multiple-zone tube furnace wherein the temperature profile was controlled to establish separate vaporization and condensation regions. Following each experiment, condensate and solid residue samples were analyzed to …

Analysis Of Additively Manufactured Lattice Structures Using Finite Element Methods, Christopher A. Box

Theses and Dissertations

Additive Manufacturing (AM) processes are well known for their ability to fabricate parts with complex geometries. Lattice structures leverage this ability to create parts with high strength-to-weight ratio and other desirable structural qualities. This research presents a parameterized modeling tool using common Finite Element Analysis (FEA) and scripting software with which aggregated lattice structures can be analyzed, given different geometric properties and loading conditions. A full factorial Design of Experiments is run to explore the effects of various parameters on the strength of lattice structures. Experimental compressive strength results from three FDM-produced PLA lattices are discussed and compared to predictions …

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Composite Cold Expansion Tooling, Andrew Amos

All Undergraduate Projects

In the world of aircraft manufacturing, cold expansion products literally hold these aircraft together. The problem faced today is that the Little Brute Hydraulic Puller designed and built by Fatigue Technology Inc. is a handheld steel hydraulic cylinder that is heavy and expensive to produce. In a market that demands continuous improvement, there is a constant push to make the product cheaper, better and lighter. In order to accomplish this demand a composite tube will be substituted in the design as the primary pressure cylinder instead of the traditional steel pressure cylinder in order to create a lighter and cheaper …