Materials Science and Engineering Commons^™

Advancements And Challenges In Additively Manufactured Functionally Graded Materials: A Comprehensive Review, Suhas Alkunte, Ismail Fidan, Vivekanand Naikwadi, Shamil Gudavasov, Mohammad Alshaikh Ali, Mushfig Mahmudov, Seymur Hasanov, Muralimohan Cheepu

Engineering Technology Faculty Publications

This paper thoroughly examines the advancements and challenges in the field of additively manufactured Functionally Graded Materials (FGMs). It delves into conceptual approaches for FGM design, various manufacturing techniques, and the materials employed in their fabrication using additive manufacturing (AM) technologies. This paper explores the applications of FGMs in diverse fields, including structural engineering, automotive, biomedical engineering, soft robotics, electronics, 4D printing, and metamaterials. Critical issues and challenges associated with FGMs are meticulously analyzed, addressing concerns related to production and performance. Moreover, this paper forecasts future trends in FGM development, highlighting potential impacts on diverse industries. The concluding section summarizes …

Experimental Analysis Of Nonlinear Wave Propagation In Bistable Mechanical Metamaterials With A Defect, Samuel R. Harre

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Mechanical metamaterials built up of compliant units can support the propagation of linear and nonlinear waves. A popular architecture consists of a one-dimensional chain of bistable elements connected by linear springs. This type of chain can support nonlinear transition waves that switch each element from one stable state to the other as they propagate along the chain. One way to manipulate the propagation of such waves is via introduction of a local inhomogeneity, i.e., a defect in the otherwise periodic chain. Recent analytical and numerical work has shown that based on its initial velocity, a transition wave may be reflected, …

Optimizing Switching Of Non-Linear Properties With Hyperbolic Metamaterials, James A. Ethridge, John G. Jones, Manuel R. Ferdinandus, Michael J. Havrilla, Michael A. Marciniak

Faculty Publications

Hyperbolic metamaterials have been demonstrated to have special potential in their linear response, but the extent of their non-linear response has not been extensively modeled or measured. In this work, novel non-linear behavior of an ITO/SiO₂ layered hyperbolic metamaterial is modeled and experimentally confirmed, specifically a change in the sign of the non-linear absorption with intensity. This behavior is tunable and can be achieved with a simple one-dimensional layered design. Fabrication was performed with physical vapor deposition, and measurements were conducted using the Z-scan technique. Potential applications include tunable optical switches, optical limiters, and tunable components of laser sources.

Advances In Mechanical Metamaterials For Vibration Isolation: A Review, Mohammed Al Rifaie, Hasanain Abdulhadi, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

The adverse effect of mechanical vibration is inevitable and can be observed in machine components either on the long- or short-term of machine life-span based on the severity of oscillation. This in turn motivates researchers to find solutions to the vibration and its harmful influences through developing and creating isolation structures. The isolation is of high importance in reducing and controlling the high-amplitude vibration. Over the years, porous materials have been explored for vibration damping and isolation. Due to the closed feature and the non-uniformity in the structure, the porous materials fail to predict the vibration energy absorption and the …

Plasmonic Metamaterials: Physical Background And Some Technological Applications, Benjamin G. Schmidt

Senior Honors Theses

New technological frontiers appear every year, and few are as intriguing as the field of plasmonic metamaterials (PMMs). These uniquely designed materials use coherent electron oscillations to accomplish an astonishing array of tasks, and they present diverse opportunities in many scientific fields.

This paper consists of an explanation of the scientific background of PMMs and some technological applications of these fascinating materials. The physics section addresses the foundational concepts necessary to understand the operation of PMMs, while the technology section addresses various applications, like precise biological and chemical sensors, cloaking devices for several frequency ranges, nanoscale photovoltaics, experimental optical computing …

Computational And Experimental Development Of 2d Anisotropic Photonic Crystal Metamaterials, James A. Ethridge

Theses and Dissertations

The future of optical devices involves manipulation of nanoscale structure in order to achieve full control over the properties of the device. In fields as diverse as directed energy, remote sensing, optical communications and optical computing, these devices promise to greatly improve performance and efficiency. To advance this further, novel samples that incorporate both photonic crystal (PhC) structure and metamaterial properties, known as PhC metamaterials, are proposed. These PhC metamaterials allow for complete control over the directionality of the light-matter interaction to serve in these new applications. To develop this technology, first, metamaterials with no PhC structure are fabricated using …

Non-Destructive Characterization Of Rotated Uniaxial Anisotropic Materials, Alexander G. Knisely

Theses and Dissertations

Electromagnetic material characterization of anisotropic media requires measurement diversity, minimal measurement uncertainty and insight into sample symmetry. Additionally, non-destructive characterization techniques are valued over legacy measurement techniques because a destructive approach requires sample preparation to execute a measurement. A Single Port Waveguide Probe (SPWP) non-destructive material characterization technique is proposed to accommodate measuring a metal backed, known thickness, rotated uniaxial anisotropic material. A rotated uniaxial sample possesses unique transverse constitutive components and a longitudinal constitutive component which is the same as one of the transverse values. The SPWP consists of a rectangular waveguide aperture cut in the center of a …

Controlling Optical Absorption In Metamaterial Absorbers For Plasmonic Solar Cells, Wyatt Adams, Ankit Vora, Jephias Gwamuri, Joshua M. Pearce, Durdo O. Guney

Joshua M. Pearce

Metals in the plasmonic metamaterial absorbers for photovoltaics constitute undesired resistive heating. However, tailoring the geometric skin depth of metals can minimize resistive losses while maximizing the optical absorbance in the active semiconductors of the photovoltaic device. Considering experimental permittivity data for InxGa1-xN, absorbance in the semiconductor layers of the photovoltaic device can reach above 90%. The results here also provides guidance to compare the performance of different semiconductor materials. This skin depth engineering approach can also be applied to other optoelectronic devices, where optimizing the device performance demands minimizing resistive losses and power consumption, such as photodetectors, laser diodes, …

Interference Of Light In Multilayer Metasurfaces: Perfect Absorber And Antireflection Coating, Khagendra Prasad Bhattarai

USF Tampa Graduate Theses and Dissertations

We have studied several metamaterials structures with multiple layers by explaining them theoretically and verifying experimentally. The engineered structures we have designed work either as a perfect absorber or antireflection coating. The multilayer model as we call it Three Layer Model (TLM) has been developed, which gives the total reflection and transmission as a function of reflection and transmission of individual layers. By manipulating the amplitude and phase of the reflection and the transmission of the individual layers, we can get the required functionality of the optoelectronic devices. To get zero reflection in the both perfect absorber and the antireflection …

Comprehensive Finite Element Modeling Of Ti-6al-4v Cellular Solids Fabricated By Electron Beam Melting, Edel Arrieta

Open Access Theses & Dissertations

Additive manufacturing permits the fabrication of cellular metals which are materials that can be highly customizable and possess multiple and extraordinary properties such as damage tolerance, metamorphic and auxetic behaviors, and high specific stiffness. This makes them the subject of interest for innovative applications. With interest in these materials for energy absorption applications, this work presents the development of nonlinear finite element models in commercial software platforms (MSC Patran/Nastran) that permit the analysis of the deformation mechanisms of these materials under compressive loads. In the development of these models, a detailed multiscale study on the different factors affecting the response …

Photonicstd-2d: Modeling Light Scattering In Periodic Multilayer Photonic Structures, Alexey Bondarev, Shaimaa Azzam, Zhaxylyk Kudyshev, Alexander V. Kildishev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Efficient modeling of electromagnetic processes in optical and plasmonic metamaterials is important for enabling new and exciting ways to manipulate light for advanced applications. In this work, we put together a tool for numerical simulation of propagation of normally incident light through a nanostructured multilayer composite material. The user builds a unit cell of a given material layer-by-layer starting from a substrate up to a superstrate, splitting each layer further into segments. The segments are defined by width and material -- dielectric, metal or active medium. Simulations are performed with the finite difference time domain (FDTD) method. A database of …

Increasing Solar Energy Conversion Efficiency In Hydrogenated Amorphous Silicon Photovoltaic Devices With Plasmonic Perfect Meta – Absorbers, Jephias Gwamuri

Dissertations, Master's Theses and Master's Reports

Solar photovoltaic (PV) devices are an established, technically-viable and sustainable solution to society’s energy needs, however, in order to reach mass deployment at the terawatt scale, further decreases in the levelized cost of electricity from solar are needed. This can be accomplished with thin-film PV technologies by increasing the conversion efficiency using sophisticated light management methods. This ensures absorption of the entire solar spectrum, while reducing semiconductor absorber layer thicknesses, which reduces deposition time, material use, embodied energy and greenhouse gas emissions, and economic costs. Recent advances in optics, particularly in plasmonics and nanophotonics provide new theoretical methods to improve …

Controlling Optical Absorption In Metamaterial Absorbers For Plasmonic Solar Cells, Wyatt Adams, Ankit Vora, Jephias Gwamuri, Joshua M. Pearce, Durdo O. Guney

Department of Materials Science and Engineering Publications

Metals in the plasmonic metamaterial absorbers for photovoltaics constitute undesired resistive heating. However, tailoring the geometric skin depth of metals can minimize resistive losses while maximizing the optical absorbance in the active semiconductors of the photovoltaic device. Considering experimental permittivity data for InxGa1-xN, absorbance in the semiconductor layers of the photovoltaic device can reach above 90%. The results here also provides guidance to compare the performance of different semiconductor materials. This skin depth engineering approach can also be applied to other optoelectronic devices, where optimizing the device performance demands minimizing resistive losses and power consumption, such as photodetectors, laser diodes, …

Solar Cell Design Using Metamaterials, Yang Liu, Yitung Chen, Jichun Li

College of Engineering: Graduate Celebration Programs

Natural structure with simultaneous negative permittivity and permeability has not been discovered yet. However, using specially-designed metal embedded in dielectric bodies can achieve a kind of artificial negative index. This periodic structure which is smaller than the guided wavelength is known as a metamaterial. However, recent designs of metamaterials have some disadvantages when they are used in the application of solar cell. The perfect absorption is only within a narrow band, and for most of the solar spectrum, the absorption is no more than 10%. Here, a new kind of absorber for the solar spectrum has been designed and analyzed, …

Characterization And Measurement Of Passive And Active Metamaterial Devices, Christopher A. Lundell

Theses and Dissertations

This document addresses two major obstacles facing metamaterial development: uncertainty in the characterization of electromagnetic field behavior in metamaterial structures and the relatively small operational bandwidth of metamaterial structures. To address the first obstacle, a new method to characterize electromagnetic field behavior in a metamaterial is presented. This new method is a bistatic radar cross section (RCS) measurement technique. RCS measurements are well-suited to measuring bulk metamaterial samples because they show frequency dependence of scattering angles and offer common postprocessing techniques that can be useful for visualizing results. To address the second obstacle, this document characterizes the effectiveness of an …

Tunable Infrared Metamaterials, David Shelton

Electronic Theses and Dissertations

Metamaterials are engineered periodic composites that have unique refractive-index characteristics not available in natural materials. They have been demonstrated over a large portion of the electromagnetic spectrum, from visible to radiofrequency. For applications in the infrared, the structure of metamaterials is generally defined using electron-beam lithography. At these frequencies, the loss and dispersion of any metal included in the composite are of particular significance. In this regard, we investigate deviations from the Drude model due to the anomalous skin effect. For comparison with theoretical predictions, the optical properties of several different metals are measured, both at room temperature and at …