Materials Science and Engineering Commons^™

Biobased Packaging Materials From Cellulose Nanofibrils Produced From Virgin Wood Pulp Or Recycled Cardboard Pulp, Md Ikramul Hasan

Electronic Theses and Dissertations

Self-standing cellulose nanofibril (CNF) films are regarded as one of the promising alternatives to current petroleum-based packaging materials. The mechanical and barrier properties of CNF films are not yet up to the mark for certain applications, especially at high relative humidity. Those properties of CNF films can be tuned by the drying methods of films, degree of fibrillation, cross-linking, and controlled shrinkage. A comprehensive understanding of these processes and their influence on the structure and properties of CNF films have been presented in this thesis.

First, we prepared CNF films from CNF suspensions with two different degrees of fibrillation- standard …

Contact Dewatering Of Cellulose Nanofibers For Biopolymer Composite Applications, Alexander Collins

Electronic Theses and Dissertations

Cellulose Nanofibrils (CNFs) are promising materials for reinforcement of polymer matrices attributable to their impressive physical and mechanical properties, as well as their biodegradability. However, the utilization of these materials in composites is made challenging by the water content of CNF slurries, the tendency of CNFs to agglomerate as they dry, and incompatibility between hydrophilic CNFs and hydrophobic polymer matrices. The most commercially viable drying methods to produce small-scale dry CNFs, such as spray drying, are very energy intensive, can only dry the materials down to micron-scale agglomerates, and do not preserve fibrillar aspect ratios. “Contact dewatering,” or the removal …

Numerical Modeling Of Localized Heating In Continuous Fiber Reinforced Thermoplastic Laminates, James T. Gayton

Electronic Theses and Dissertations

The manufacturing of continuous fiber-reinforced thermoplastic (CFRTP) laminates requires the application of heat and pressure. Standard CFRTP manufacturing methods like thermoforming take a global approach to manufacturing, where the whole part is heated and undergoes a forming process. There is an opportunity to develop advanced manufacturing methods based on localized heating and deformations of consolidated stock. This thesis provides a localized heating method via networks of resistive heating elements embedded within the laminate and a means to evaluate that method.

Typical heating methods for CFRTP laminates include infrared and convective ovens or surface contact heaters. They have the same drawbacks …

Continuous, Non-Destructive Detection Of Surface Bacterial Growth With Bioinspired Vascularized Polymers, Brandon Dixon

Electronic Theses and Dissertations

Reducing or eliminating bacteria on surfaces is vital for medical devices, drinking water quality, and industrial processes. Evaluating surface bacterial growth at buried interfaces can be problematic due to the time-consuming disassembly process required for obtaining standard surface samples. In this work, a continuous, non-destructive, and reusable method was developed to detect surface bacterial growth at buried interfaces. Inspired by vascular systems in nature that permit chemical communication between the surface and underlying tissues of an organism, bacterial-specific signals diffusing from cells on the surface were detected in channels filled with an inert carrier fluid embedded in a polymer matrix. …

Comparative Life Cycle Assessment Of Embodied Carbon And Operational Energy Of Different Building Systems, Marilia Hellmeister

Electronic Theses and Dissertations

Due to human activity, the levels of carbon emissions found in the atmosphere have reached its highest concentration and therefore it is necessary to find solutions to reduce, mitigate and adapt to a more sustainable pattern of development. The substitution of fossil fuel-dependent materials with renewable materials which exhibit lower embodied carbon is an option to be considered in the design phase of a building. Engineered wood product innovations over the past twenty years, coupled with design innovation and building code modifications have demonstrated their viability in multi-story construction (18 stories). The goals of this project are to 1) estimate …

Development And Characterization Of Bound Metal Deposition Including Laser Ablation, Alexander J. Watson

Electronic Theses and Dissertations

Bound Metal Deposition (BMD) is a novel metal additive manufacturing technology in which a metal powder-binder composite paste is layer-wise extruded to form a part, which is then debound and sintered into a solid metal part. Although promising, BMD suffers from shrinkage-induced warpage and an inability to produce fine length scale features. This research addresses these problems by: (1) characterizing warpage of planar parts, and (2) developing a novel laser ablated process to create fine length scale features. First, a 12-factor resolution IV fractional-factorial design of experiments (DOE) was conducted to determine the warpage of planar parts as a function …

Yield And Mechanical Properties Of Veneer From Maine-Grown Eastern Spruce And Balsam Fir, Marshal Bertrand

Electronic Theses and Dissertations

This research focused on the utilization of Maine Eastern spruce and balsam fir for veneer production. Maine currently has no manufacturers of or products using structural veneer. The diversification of markets for Maine’s softwoods has been identified as a route to increase the resilience of the forest-based economy. Veneer production technology has improved significantly since the last look at Maine spruce veneer (1969), justifying the reinvestigation of Maine spruce-fir veneer. The objective of this research was to provide information on the yield of processing veneer and the quality of said veneer. A sample size of 37 Eastern spruce and 38 …

Development And Evaluation Of Modeling Approaches For Extrusion-Based Additive Manufacturing Of Thermoplastics, Christopher C. Bock

Electronic Theses and Dissertations

This work focuses on evaluating different modeling approaches and model parameters for thermoplastic AM, with the goal of informing more efficient and effective modeling approaches. First, different modeling approaches were tested and compared to experiments. From this it was found that all three of the modeling approaches provide comparable results and provide similar results to experiments. Then one of the modeling approaches was tested on large scale geometries, and it was found that the model results matched experiments closely. Then the effect of different material properties was evaluated, this was done by performing a fractional factorial design of experiments where …

Non-Destructive Evaluation Of Concrete Using Electrical Resistivity And Ultrasonic Wave Propagation, Justin Harris

Electronic Theses and Dissertations

With the intent to investigate the relationship between concrete physical properties and non-destructive evaluation techniques (NDE), several experiments were performed. Specimens were made at varying geometries using a range of different concrete mixes under several different curing conditions. These specimens were subjected to a combination of electrical resistivity and ultrasonic wave propagation measurements. One part of this study investigated determining the orientation of steel fibers using electrical resistivity. This resulted in the fabrication of a four-probe square device with the potential capabilities of determining fiber orientation. The other part of this research applied ultrasonic wave propagation via through-transmission along with …

Charged-Particle Interactions To Generate Novel Coatings And Materials, Pradnya D. Rao

Electronic Theses and Dissertations

A typical paper coating formulation contains anionically charged pigments and latex to provide a high-quality surface for printing. However, during application and drying, the latex can migrate to the surface or deep into the paper, resulting in weak coating layers or the need to use a high latex content to obtain the same strength properties. In this thesis, we have explored the introduction of cationically charged particles into the suspension as a way to reduce the amount of binder in the coatings, improve coating strength and reduce binder migration. With these aims in mind, we have generated cationic precipitated calcium …