Engineering Science and Materials Commons^™

Extractive Metallurgy Of Copper, Fathi Habashi

Fathi Habashi

Cavitation Modelling Based On Eulerian-Eulerian Multiphase Flow, Rachid Bannari Ph.D

Rachid BANNARI

Cavitation is a physical phenomenon encountered in the normal operation of hydraulic turbines. It can lead to loss in efficiency, vibrations and blade erosion damages. It is crucial to accurately predict cavitation development and evolution to make confident predictive results for hydraulic turbines in a cavitating regime. The cavity closure is a critical region that is characterized by its unsteady and unstable behavior. In this region, liquid and vapor are highly mixed and experienced a strong interaction between the cavity and the outer flow. Most of the published work is based on the mixture multiphase model. An important limitation of …

On The Derivation Of Boundary Conditions From The Global Principles Of Continuum Mechanics, Gerald G. Kleinstein

Gerald G. Kleinstein

We consider the motion of a fluid exterior to a moving rigid obstacle, or interior to a moving rigid shell. The boundary conditions, such as the no-slip condition and the condition of an isothermal wall, applied in the solution of the system of differential equations describing these motions, are currently assumed to be an approximation derived from experimental observation rather than an exact law. It is the purpose of this paper to show that the boundary conditions at a material interface between a fluid and a solid are derivable from the global principles of balance of continuum mechanics and the …

Metalurgia Extractiva Y Política Nacional, Fathi Habashi

Fathi Habashi

Should a country export its mineral wealth in form of concentrates or should it locally treat its ores to produce metals as final products? In the past centuries pyrometallurgy was the only route to extract metals from ores and this required a large capital investment many countries could not afford to raise. This situation encouraged marketing of concentrates. Today, metallurgists have the option to use the hydrometallurgical route to process ores and concentrates at a reasonable capital investment. This opened the way to the possibility of processing ores locally. When need arises to increase production new units can be added …

Termodynamika Procesowa (Dla Me Aparatura Procesowa) Ćw., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

The Analysis Of Heat Transfer In A Gas-Gas Heat Exchanger Operated Under A Heat-Recirculating Mode, Mariusz Salaniec, Wojciech M. Budzianowski

Wojciech Budzianowski

The present paper presents the analysis of heat transfer in a gas-gas heat exchanger operated in a heat-recirculating mode.

An Overview Of Technologies For Upgrading Of Biogas To Biomethane, Wojciech M. Budzianowski

Wojciech Budzianowski

The present contribution presents an overview of technologies available for upgrading of biogas to biomethane. Technologies under study include pressure swing adsorption (PSA), high-pressure water wash (HPWW), reactive absorption (RA), physical absorption (PA), membrane separation (MS) and cryogenic separation (CS).

Influence Of Energy Policy On The Rate Of Implementation Of Biogas Power Plants In Germany During The 2001-2010 Decade, Izabela Chasiak, Wojciech M. Budzianowski

Wojciech Budzianowski

The current article describes energy policy tools, which caused intensive development of biogas-based power generation in Germany during the 2001-2010 decade. The German system of financial support to biogas power plants is presented in details. It is shown that in Germany, i.e. in a country characterised by similar climate and potentials to renewable energy to Poland, biogas power plants cover 10,7% of electricity demands in 2010, while all renewable energy sources cover only 5,4% of electricity demands. It is emphasised that under favourable Polish energy policy, the development of biogas energy can be very rapid.

Reverse Logic - Safety Of Spent Nuclear Fuel Disposal, Antti Lempinen, Marianne Silvan-Lempinen

Antti Lempinen

No abstract provided.

Leaching Mechanism Of Semiconducting Minerals, Fathi Habashi

Fathi Habashi

The mechanism of leaching of semiconducting minerals such as PbS, ZnS, UO2, etc., has been the subject of intensive speculation by hydrometallurgists in the early 1950s. The electrochemical mechanism proposed in 1970 by the author in volume 2 of his Principles of Extractive Metallurgy avoids the assumption of forming intermediate complexes that cannot be isolated or identified.

Energetyka Niskoemisyjna, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Fast Energy Loss Computation And Fuzzy-Based Shunt Capacitor Insertion, Philadelphia University

Philadelphia University, Jordan

No abstract provided.

Metals: Typical And Less Typical, Transition And Inner Transition, Fathi Habashi

Fathi Habashi

While most chemists agree on what is a metal and what is a non-metal there is a disagreement with respect to what is a metalloid and what is a transition metal. It is believed that this problem can be solved if two new terms are adopted: typical and less typical metals. These new terms will also help reconcile the European Periodic Table versus the North American regarding numbering of groups as well as the IUPAC numbering which could be as well abandoned in favour of group names as will be shown in the manuscript.

Beethoven: Patriotism And Social Justice, Fathi Habashi

Fathi Habashi

Phosphate Industry And The Radon Problem, Fathi Habashi

Fathi Habashi

The problem of radon generated during the treatment of phosphate rock by sulfuric acid to produce fertilizers can be solved by using nitric acid. In this case radium, which is the source of radon, goes into solution and can be precipitated by a controlled method and safely disposed of. A variety of options are discussed. Text in Farsi with English translation.

My Curriculum Vitae (As January 2013), Yun Hau Ng

Yun Hau Ng

References available upon request

Grafika Inżynierska Ćw., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Projektowanie Procesów Biotechnologicznych Proj., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Projektowanie I Optymalizacja Procesów Proj., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Metody Numeryczne Lab., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Odnawialne Źródła Energii W., Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Aqua Science Through The Ages. An Illustrated History Of Water, Fathi Habashi

Fathi Habashi

Water a component of the Four Elements considered by the ancient philosophers as essential for survival, played, and is still playing an essential role in society. Great civilizations in ancient times developed along great rivers. The ancient peoples knew how to manage water supplies by digging canals, controlling floods, and using water for irrigation. They designed equipment that used water to measure the time, to determine the density of solids, to fight fires, and to create vacuum. Modern engineers exploited water flow to design and construct huge hydroelectric power stations. Waterways and navigation systems were also an essential element for …

The Tangled Tale Of Phase Space, David D. Nolte

David D Nolte

Mining And Civilization, An Illustrated History, Fathi Habashi

Fathi Habashi

Comparison Between Direct Quadrature Method Of Moments And The Method Of Classes For Bubbly Flow, Brahim Selma, Rachid Bannari, Pierre Proulx

Rachid BANNARI

No abstract provided.

Design And Cfd Analysis Of Mass Transfer And Shear Stresses Distributions In Airlift Reactor, Rachid Bannari, Brahim Selma, Abdelfettah Bannari, Pierre Proulx

Rachid BANNARI

The design, scale-up and performance evaluation of biological reactors require accurate information about the gas-liquid flow dynamics. In this study, we use CFD techniques to investigate important parameters of the multiphase flow dynamics on an initial airlift bioreactor in order to improve its design. Such parameters are distributions of shear stresses and mass transfer. Our initial proposed design of the airlift bioreactor was used for biomass growing. Specifically to produce cellulase enzyme using the fungus Trichoderma Reesei. However, the morphology of the microorganism obtained in this bioreactor was not appropriated to produce cellulase. Since the microorganism morphology presented a small …

A Coupled Cfd-Kinetic Models For Cellulase Production In Airlift Reactor, Rachid Bannari, Abdelfettah Bannari, Brahim Selma, Pierre Proulx

Rachid BANNARI

Cellulase production provides a catalyst for cellulose hydrolysis to glucose, to be used for eventual production of ethanol. The transport of reactants may influence the reaction rate remarkably, for the biological reaction, especially the enzymatic reaction, The transport behavior of the components in a biological system should be considered in the model. In this work, we propose a coupled model between hydrodynamics (twoPhaseEuler- Foam) and a kinetic model for batch and fed-batch cellulase enzyme production by T. reesei from cellulose/lactose substrate which is constructed from literature concepts and laboratory data. Good agreement is obtained between the results and experimental data.

Researches On Copper. History & Metallurgy, Fathi Habashi

Fathi Habashi

Gold. History, Metallurgy, Culture, Fathi Habashi

Fathi Habashi

Chemistry And Metallurgy In The Great Empires, Fathi Habashi

Fathi Habashi

It is remarkable that certain countries expand to become great empires then as time goes by they gradually decline while others rise. This book attempts to briefly trace the history of chemistry and metallurgy through the different empires that became at one time great and then faded away. In 272 pages 21.5 x 28 cm, the author outlines the inter-relation of chemistry, metallurgy, mining, and medicine, the idea of the divinity of kings and the formation of nations, and finally the rise and fall of the empires. He then covers the ancient and medieval empires, followed by the empires from …