Engineering Education Commons^™

From Carnival Games To Plastic Filters: Preparing Elementary Preservice Teachers To Teach Engineering, Jennifer Kidd, Pilar Pazos, Kristie Gutierrez, Danielle Rhemer, Stacie Ringleb, Krishna Kaipa, Isaac Kumi, Orlando Ayala, Francisco Cima

Teaching & Learning Faculty Publications

Preservice teachers (PSTs) in an educational foundations course were tasked with leading elementary students in an engineering design challenge. In order to explore different approaches for helping the PSTs develop competence in engineering education, two implementation methods were tested. In Spring 2022, PSTs collaborated with undergraduate engineering students to develop carnival-themed design challenge lessons. In Fall 2022, PSTs worked with their PST classmates to teach a professionally prepared engineering lesson focused on designing plastic filters. PSTs’ knowledge of engineering and engineering pedagogy were compared across the two semesters using an exploratory approach. Both groups showed increases in engineering knowledge and …

Simulating Function Generators And Oscilloscopes In A Virtual Laboratory Environment, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Modeling, Simulation and Visualization Student Capstone Conference

This paper discusses the development of a virtual laboratory for simulating electronic instruments commonly used in science and engineering courses, such as function generators and digital storage oscilloscopes. Mathematical equations are used to represent continuous signals and ensure signal integrity, while C# delegates are adopted to enable communication between simulated devices. The approach allows for loose coupling between software components and high cohesion of individual components, and can be applied to other virtual laboratory developments. The virtual laboratory provides a means for students to gain hands-on experience with electronic instruments and improve their understanding of theoretical concepts.

Promoting Skills In Children And Teens With Autism Spectrum Disorder Through Play And Steam, Meaghan Mcleod Mozingo, Krzysztof J. Rechowicz

Modeling, Simulation and Visualization Student Capstone Conference

Individuals with autism spectrum disorder (ASD) have a low employment rate. This is caused by a lack of support from employment resources and the negative stigma associated with common characteristics associated with ASD. With limited career-building activities and events, it is difficult for individuals with ASD to identify their skills, strengths, and career opportunities. Parental support is crucial when seeking employment opportunities for their children. Through the use of play, children with ASD engaged and explored their skills with science, technology, engineering, arts, and math-centered activities. This paper highlights the events and shows the proposed redesign for an additional workshop.

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Preparing Students To Solve Challenges Related To A Changing Climate, Mujde Erten-Unal, Dalya Ismael, Carol L. Considine

Civil & Environmental Engineering Faculty Publications

The National Academy of Engineering has identified restoring and improving urban infrastructure as one of the grand challenges for engineering. Urban coastal communities are particularly at risk as their infrastructure is experiencing frequent inundation related to climate change impacts. Rising sea levels in coastal communities create backflow into stormwater systems and deplete capacity. In addition, the increase in rainfall intensity, duration, and frequency related to climate change create additional challenges for aging infrastructure systems. To prepare students to solve these challenges, the Civil and Environmental Engineering (CEE) and Civil Engineering Technology (CET) programs at Old Dominion University (ODU) are introducing …

Teaching Data Acquisition Through The Arduino-Driven Home Weather Station Project, Sheryl Dutton, Kurt Galderisi, Murat Kuzlu, Otilia Popescu, Vukica Jovanovic

Engineering Technology Faculty Publications

The main objective of this paper is to present one possible way to engage undergraduate students in designing a system that uses the Internet of Things (IoT) strategy for data acquisition and management. The MATLAB home weather station project presented here was developed by a team of students for the senior design course in the Electrical Engineering Technology undergraduate program at Old Dominion University (ODU). The main purpose of this project was for undergraduate students to learn how to create a localized, compact, and precise weather station. Utilizing various sensors, both homemade and sourced online, this weather station is capable …

Development Of Sensing And Programming Activities For Engineering Technology Pathways Using A Virtual Arduino Simulation Platform, Murat Kuzlu, Vukica Jovanovic, Otilia Popescu, Salih Sarp

Engineering Technology Faculty Publications

The Arduino platform has long been an efficient tool in teaching electrical engineering technology, electrical engineering, and computer science concepts in schools and universities and introducing new learners to programming and microcontrollers. Numerous Arduino projects are widely available through the open-source community, and they can help students to have hands-on experience in building circuits and programming electronics with a wide variety of topics that can make learning electrical prototyping fun. The educational fields of electrical engineering and electrical engineering technology need continuous updating to keep up with the continuous evolution of the computer system. Although the traditional Arduino platform has …

Preparing Undergraduates For The Post-Pandemic Workplace: Teams Of Education And Engineering Students Teach Engineering Virtually, Kristie S. Gutierrez, Jennifer Kidd, Min J. Lee, Krishnanand Kaipa, Orlando Ayala

Teaching & Learning Faculty Publications

When schools and universities across the world transitioned online due to the COVID-19 pandemic, Ed+gineering, a National Science Foundation (NSF) project that partners engineering and education undergraduates to design and deliver engineering lessons to elementary students, also had to shift its hands-on lessons to a virtual format. Through the lens of social cognitive theory (SCT), this study investigates engineering and education students’ experiences during the shift to online instruction to understand how they perceived its influence on their learning. As a result of modifying their lessons for online delivery, students reported learning professional skills, including skills for teaching online and …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

Enhancing Online Hands-On Learning In Engineering Education: Student Perceptions And Recommendations, Dalya Ismael

Engineering Technology Faculty Publications

Designing effective online engineering courses that include hands-on components or labs requires a thorough understanding of student perspectives and the development of strategies to improve learning outcomes. Despite the growing number of studies on online learning, little information exists on the unique challenges engineering students face in hands-on courses. To address this gap, this study used a questionnaire to gather engineering students’ perspectives on course design and delivery. The findings highlight the challenges faced by students in online engineering courses with hands-on components, such as difficulty in collaborating with peers. To address these challenges, recommendations are proposed, such as incorporating …

Development Of A Simevents Model For Printed Circuit Board (Pcb) Assembly Processes, Siqin Dong, Mileta Tomovic, Krishnanand Kaipa

Engineering Technology Faculty Publications

Printed circuit boards (PCBs) are the foundational building blocks of most modern electronic devices. PCB assembly is defined as the process of mounting different electronic components on a PCB. Circuit board assembly utilizes an automated technique with most steps completed by machines for different operations (e.g., pick-and-place components, soldering, etc.). In this paper, details of a student course project, carried out at Old Dominion University, on the design and simulation of PCB assembly processes based on MATLAB discrete-event system are presented. An essential component in the advanced manufacturing technology course is the hands-on experience where students implement multiple software simulation …

Teaching Analytics Online: A Self-Study Of Professional Practice, Andrew J. Collins, Brandon Butler, James F. Leathrum Jr., Christopher J. Lynch

Engineering Management & Systems Engineering Faculty Publications

As the COVID-19 pandemic caused severe disruption to education enterprises throughout the world, the main response by educational institutions was to move to online learning environments. The purpose of this study was to understand better how instructors could improve online learning for a professional-level week-long short course in a highly technical area (data analytics), which had, pre-COVID, been a hands-on computer, laboratory-based learning experience. The authors used self-study of professional practice to elicit and understand the major issues and concerns of the transition to an online learning environment. Under the guidance of a colleague in teacher education, three course instructors …

Predicting Engineering Integration In K-12 From The Perspective Of Pre-Service Teachers, Pilar Pazos, Francisco Cima, Jennifer Kidd, Kristie Gutierrez, Dorothy Faulkner, Minjung Lee, Krishna Kaipa, Orlando Ayala

Engineering Management & Systems Engineering Faculty Publications

The integration of engineering content at the pre-college level is gaining global traction as a strategy to improve learning outcomes and to promote inclusion and diversity in STEM (Science, Technology, Engineering, and Mathematics). Preservice teacher (PST) programs have become natural insertion points for integration efforts by providing future K-12 teachers with the resources and preparation to teach engineering as part of their academic preparation. There is a need to understand the socio-cognitive mechanisms by which teacher preparation programs can help teachers to integrate engineering in their future classrooms. This work examines how an innovative cross-disciplinary program impacted important social-cognitive drivers …

Enablers And Barriers Of Communication In Virtual Engineering Teams: The Role Of Teamwork Skills And Emergent Conflict, Pilar Pazos, Francisco Cima

Engineering Management & Systems Engineering Faculty Publications

Communication is a critical process that facilitates team members' coordination, expertise exchange, decision-making, and, consequently, team elfectiveness. A focus on effective communication is critical in virtual teams due to their lack of face-to-face interactions and social presence. Communication becomes challenging in remote settings, and specific skills emerge as more essential to success. It is known that effective teams rely on planning, execution, and interpersonal skills to be successful. Still, the specific impact of these skills on virtual team effectiveness is not well understood. Additionally, conflict can emerge as a significant barrier to collaboration for remote teams that can hinder their …

How Does Working On An Interdisciplinary Service-Learning Project Vs. A Disciplinary Design Project Affect Peer Evaluators' Teamwork Skills, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Pilar Pazos, Francisco Cima, Krishnanand Kaipa, Min Jung Lee, Kristie Gutierrez, Jennifer Jill Kidd

Mechanical & Aerospace Engineering Faculty Publications

Over the course of several semesters, two different project-based learning approaches were used in two undergraduate engineering courses–a 100-level introductory course that covered a general education requirement on information literacy and a 300-level fluid mechanics course. One project (treatment) was an interdisciplinary service-learning project, implemented with undergraduate engineering and education students who collaborated to develop and deliver engineering lessons to fourth and fifth-grade students in a field trip model. The other projects (comparison) involved a team-based design project contained within each class. In the 100-level course, students selected their project based on personal interests and followed the engineering design process …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Undergraduate Engineering And Education Students Reflect On Their Interdisciplinary Teamwork Experiences Following Transition To Virtual Instruction Caused By Covid-19, Kristie S. Gutierrez, Jennifer J. Kidd, Min Jung Lee, Pilar Pazos, Krishnanand Kaipa, Stacie I. Ringleb, Orlando Ayala

Teaching & Learning Faculty Publications

This study explores undergraduate engineering and education students’ perspectives on their interdisciplinary teams throughout the rapid transition to online learning and instruction from a face-to-face to a virtual format. In this qualitative study, students’ reflections and focus groups from three interdisciplinary collaborations were analyzed using the lens of Social Cognitive Theory. COVID-19 created a dramatic change in the environment such that the most immediate and direct impact on students’ experiences was on the environmental aspects of Bandura’s triadic reciprocal determinism model, which then triggered behavioral and personal responses to adapt to the new environment. Subsequent evidence of reciprocal effects between …

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Rapid Development Of Advanced Virtual Labs For In-Person And Online Education, Yiyang Li, Pauline Delacruz, Yuzhong Shen

Modeling, Simulation and Visualization Student Capstone Conference

This abstract discusses methodologies and preliminary findings on rapid development of advanced virtual labs using modeling and simulation for in-person and online education, including rapid generation of virtual environment, integration of state-of-the-art industry leading software tools, advanced software design techniques that enables large scale software reuse, and innovative user interface design that facilitate the configuration and use of virtual labs by instructors and students. The latest design and development of the virtual lab for electronic circuits is presented.

Deapsecure Computational Training For Cybersecurity: Third-Year Improvements And Impacts, Bahador Dodge, Jacob Strother, Rosby Asiamah, Karina Arcaute, Wirawan Purwanto, Masha Sosonkina, Hongyi Wu

Modeling, Simulation and Visualization Student Capstone Conference

The Data-Enabled Advanced Training Program for Cybersecurity Research and Education (DeapSECURE) was introduced in 2018 as a non-degree training consisting of six modules covering a broad range of cyberinfrastructure techniques, including high performance computing, big data, machine learning and advanced cryptography, aimed at reducing the gap between current cybersecurity curricula and requirements needed for advanced research and industrial projects. By its third year, DeapSECURE, like many other educational endeavors, experienced abrupt changes brought by the COVID-19 pandemic. The training had to be retooled to adapt to fully online delivery. Hands-on activities were reformatted to accommodate self-paced learning. In this paper, …

Reconfigurable Modules For Automatic Creating Robotic Courses, Ana Djuric, Vukica Jovanovic

Engineering Technology Faculty Publications

The main objective of this paper is to describe a teaching tool that can be used for automated creation of different problems that can be used for assessing student knowledge while teaching industrial robotics courses. These materials can be used for instructors who need to create customized questions and answers for different student homework. Wayne State University, Detroit, MI offer different industrial robotics and courses related to fundamental robotic theory: kinematics, dynamics, and control. Old Dominion University, Norfolk, VA offers the course in Introduction to Industrial Robotics. Both programs are Mechanical Engineering Technology under the Engineering Technology departments / division. …

A Pilot Course As A Step Towards New Academic Programs In Renewable Energies, Otilia Popescu, Orlando Ayala, Isaac Flory, Jose Fernandez, Vukica Jovanović

Engineering Technology Faculty Publications

The challenges arising from climate change have never before in human history been more pressing for solutions. Addressing pollution and the transition to clean energies are essential problems to solve in the upcoming decades. The process of transitioning to renewable energies has started already, with some states leading the process. As the development of industries sees a fast growth, the supply of qualified engineers and technicians to support these industries needs to keep up. At the community college level, some efforts have already started to introduce courses on renewable energies as well as boot camps or certifications to prepare the …

Validation Of The Ambassador Questionnaire For Undergraduate Students Conducting Engineering Outreach, Melissa G. Kuhn, Shanan Chappell Moots, Joanna K. Garner

Center for Educational Partnerships Publications

Although K-12 engineering outreach commonly involves college students, the young professionals who act as ambassadors for their field are less likely to be studied than the students they serve. Yet, outreach activities may offer opportunities for undergraduate students to develop aspects of their professional selves. As there is currently no comprehensive measure that allows researchers, program evaluators, and outreach advisors to examine ambassadors' professional development and growth, this study sought to develop and validate an Ambassador Questionnaire (AQ). The multi-step process included the selection and adaptation of items from extant measures of engineering students' motivation, beliefs, professional skills, and perceptions …

Augmented Reality Integrated Welder Training For Mechanical Engineering Technology, Aditya Akundi, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

The shortage of welders is well documented and projected to become more severe for various industries such as shipbuilding in coming years. It is mainly because welding training is a critical and often costly endeavor. This study examines the training potential using augmented reality technology as a critical part of welder training for mechanical engineering technology students. This study assessed the performance of two groups of MET students trained with two different methods. One group received training with the traditional method in three sessions. The second group acquired training initially with an augmented reality welding system for three sessions. Then, …

Development Of Experiential Learning Experiences For K-12 Students Focusing On Smart Cities, Murat Kuzlu, Vukica Jovanovic, Nathan Puryear, Patrick J. Martin, Sherif Abdelwahed, Özgür Güler

Engineering Technology Faculty Publications

The main objective of this paper is to describe a project focused on the development of experiential learning experiences for undergraduate and graduate students focusing on smart cities. The future workforce needs students with various data analytics skills, service reliability, and sustainability. The team of researchers from Old Dominion University and Virginia Commonwealth University is developing a virtual smart city lab environment at both universities and collaborating on multiple research projects. The main purpose of this virtual labs is to provide a testbed that can be used for students who are interested in careers related to cyber-physical systems (CPS). These …

Overview Of Standards For Technological And Engineering Literacy (Other), Philip Reed, Tyler Love, Scott Bartholomew, Kelly Dooley

STEMPS Faculty Publications

In 2020, the International Technology and Engineering Educators Association (ITEEA) published Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) [1]. These standards open with a clear rationale why all Pk-12 students should study technology and engineering:

Technology and engineering are pervasive in all aspects of our lives. Every human activity is dependent upon the products, systems, and processes created to help grow food, provide shelter, communicate, work, and recreate. As the world grows more complex, it is increasingly important for everyone to understand more about technology and engineering [1, p. 1].

The …

Blast-Building Leaders For Advancing Science And Technology: A Partnership Between The Virginia Space Grant Consortium And The University Of Virginia, Virginia Polytechnic Institute, And Old Dominion University, Cynthia Tomovic, Mary Sandy, Julie Back, Vukica Jovanovic, Kim Lester, Edward Murphy, Sueanne Mckinney, Mileta Tomovic

STEMPS Faculty Publications

This paper presents the development and delivery of educational summer intensive programs for high school students that are designed to encourage students’ interests in the STEM-related fields and the motivation to pursue a STEM-related degrees in college. BLAST (Building Leaders to Advance Science and Technology) is designed as a summer-intensive, residential, on-campus STEM-learning experience for rising ninth and tenth graders. With the intention of improving the STEM-related workforce pipeline in the Commonwealth of Virginia, Virginia Space Grant Consortium (VSGC) offers multiple BLAST programs across the Commonwealth. BLAST programs are designed as intensive three-day, STEM-related three-hour lecture-lab experiences that are reinforced …

Digital Educational Modules Development For The Career And Technical Cybersecurity Pathways During The Covid-19 Pandemic, Vukica Jovanović, Murat Kuzlu, Otilia Popescu, Petros Katsioloudis, Linda Vahala, Michael Wu, Deborah Marshall, Michael Crespo, Mary Addison

Engineering Technology Faculty Publications

Virtual learning has been used now for several decades, but it has never had a bigger impact on student learning than in the era of the COVID-19 pandemic. Universities and schools faced shutdowns all around the world, and teachers had to adapt rapidly to online mode of instruction. Many educators were faced with a triage approach with no previous experience in distance learning, a lack of resources for professional development, and already existing shortages of current educational modules that could assist them in their day-to-day jobs. This gap was especially evident in areas such as career and technical education (CTE) …

Agile Research - Getting Beyond The Buzzword, Trupti Narayan Rane

Engineering Management & Systems Engineering Faculty Publications

"Oh yeah, we're an Agile shop, we gave up Waterfall years ago." - product owners, managers, or could be anyone else. You will seldom have a conversation with a product or software development team member without the agile buzzword thrown at you at the drop of a hat. It would not be an oversell to say that Agile software development has been adopted at a large scale across several big and small organizations. Clearly, Agile is an ideology that is working, which made me explore more on its applicability in research. As someone who has been in the Information Technology …